I have been asked to copy a store procedure from one database to another and also copy triggers from one table to another. Can someone tell me how to go about it or how I can do that? I look forward to hearing from you.
Regards,
Is it possible that when a trigger fires (insert) I can have a file moved from one compter/folder to another?
If so how?
TIA
Dave
I am using dtswizard to export my db but it doesn't export triggers and all stored procedures. Am I doing anything wrong or is there a better way to do an exact copy of my DB? I am not able to use backup/restore because my db is on a server to which I don't have admin-right, and I have to pay my hoster to create a backup and email me. TIAThomas
View 8 Replies View RelatedThis isn€™t an problem as such, it€™s more of a debate.
If a table needs a number of update triggers which do differing tasks, should these triggers be separated out or encapsulated into one all encompassing trigger. Speaking in terms of performance, it doesn€™t make much of an improvement doing either depending upon the tasks performed. I was wondering in terms of maintenance and best practice etc. My view is that if the triggers do totally differing tasks they should be a trigger each on their own.
www.handleysonline.com
Hi,
I set up DB mirror between a primary (SQL1) and a mirror (SQL2); no witness. I have a problem when I issue command:
alter database DBmirrorTest
Set Partner = N'TCP://SQL2.mycom.com:5022';
go
The error message is:
The remote copy of database "DBmirrorTest" has not been rolled forward to a point in time that is encompassed in the local copy of the database log.
I have the steps below prior to the command. (Note that both servers' service accounts use the same domain account. The domain account I login to do db mirror setup is a member of the local admin group.)
1. backup database DBmirrorTest on SQL1
2. backup database log
3. copy db and log backup files to SQL2
4. restore db with norecovery
5. restore log with norecovery
6. create endpoints on both SQL1 and SQL2
CREATE ENDPOINT [Mirroring]
STATE=STARTED
AS TCP (LISTENER_PORT = 5022, LISTENER_IP = ALL)
FOR DATA_MIRRORING (ROLE = PARTNER)
7. enable mirror on mirror server SQL2
:connect SQL2
alter database DBmirrorTest
Set Partner = N'TCP://SQL1.mycom.com:5022';
go
8. Enable mirror on primary server SQL1
:connect SQL1
alter database DBmirrorTest
Set Partner = N'TCP://SQL2.mycom.com:5022';
go
This is where I got the error.
The remote copy of database "DBmirrorTest" has not been rolled forward to a point in time that is encompassed in the local copy
Thanks for any help,
KT
Hi!
I did:
alter database mydb set single_user with rollback immediate;
exec sp_detach_db @dbname='mydb', @keepfulltextindexfile='true';
then I tried to copy files to new location on other drives, same server but got
>>Cannot copy <myfile>: Access is denied
Make sure the disk is not full or write-protected and that the file is not currently in use<<
I also tried rename of file without success.
I also tried with db service stoppet (not preferred) without success.
How to find out, which process locks the files?
Best regards
How do I transfer/copy the stored procedures in my Test DB to my LIVE DB? IT won't allow me to export keeps giving me an error.
View 4 Replies View RelatedHello,
if i have a given database (a model) and i want to copy this database in the same database instance. Is it ok to copy the mdf and ldf file and attach the files with a new database name in the same instance.
Or is the datebase name part of the .mdf file?
Regards
Markus
I am attempting to use the copy wizard to copy databases from SQL Server 2005 to SQL Server 2008 R2 w/ FP1.
The copy fails with a login failure to SQL Server 2005. I have a user id & password under Windows for both servers. I have a user id and password under SQL security with the called for admin security rights.
The 2005 server has two instances, 20 databases, two dozen maintenance plans, and over a hundred users. I really would like to use the utility so I don't have to recreate everything manually.
Hi~,
Before implementing memory based bulk copy insert with IRowsetFastLoad interface of SQL Server 2005 OLE DB provider, I want to know some considerations.
- performance : compared with T-SQL's "BULK INSERT ..." and bcp utility
- SQL Server's resource usage : when running memory based bulk copy, server resource's influence
- server side action(behavior) : when server is busy, delayed-update means IRowsetFastLoad::Commit(true) method can insert right after?
- row-count : The rowcount limitation can be inserted by IRowsetFastLoad::InsertRow() method before IRowsetFastLoad::Commit
- any other guide lines
Hi~, I have 3 questions about memory based bulk copy.
1. What is the limitation count of IRowsetFastLoad::InsertRow() method before IRowsetFastLoad::Commit(true)?
For example, how much insert row at below sample?(the max value of nCount)
for(i=0 ; i<nCount ; i++)
{
pIFastLoad->InsertRow(hAccessor, (void*)(&BulkData));
}
2. In above code sample, isn't there method of inserting prepared array at once directly(BulkData array, not for loop)
3. In OLE DB memory based bulk copy, what is the equivalent of below's T-SQL bulk copy option ?
BULK INSERT database_name.schema_name.table_name FROM 'data_file' WITH (ROWS_PER_BATCH = rows_per_batch, TABLOCK);
-------------------------------------------------------
My solution is like this. Is it correct?
// CoCreateInstance(...);
// Data source
// Create session
m_TableID.uName.pwszName = m_wszTableName;
m_TableID.eKind = DBKIND_NAME;
DBPROP rgProps[1];
DBPROPSET PropSet[1];
rgProps[0].dwOptions = DBPROPOPTIONS_REQUIRED;
rgProps[0].colid = DB_NULLID;
rgProps[0].vValue.vt = VT_BSTR;
rgProps[0].dwPropertyID = SSPROP_FASTLOADOPTIONS;
rgProps[0].vValue.bstrVal = L"ROWS_PER_BATCH = 10000,TABLOCK";
PropSet[0].rgProperties = rgProps;
PropSet[0].cProperties = 1;
PropSet[0].guidPropertySet = DBPROPSET_SQLSERVERROWSET;
if(m_pIOpenRowset)
{
if(FAILED(m_pIOpenRowset->OpenRowset(NULL,&m_TableID,NULL,IID_IRowsetFastLoad,1,PropSet,(LPUNKNOWN*)&m_pIRowsetFastLoad)))
{
return FALSE;
}
}
else
{
return FALSE;
}
Is it possible to achieve this using triggers:When someone tries to delete a row in table A, the trigger should first delete a corresponding row in table B and then delete the row in table A. The reason being that, there is a foreign key set on Table B that references table A. So any attempt to delete a row in table A without deleting the corresponding row from B, throws an error.
View 1 Replies View RelatedHello All,
I have to write Trigger for Update,
I have two tables, one is for storing records of current values, and one is for storing history of values.
How to Write a Trigger on Main Table. As we have Inserted and Deleted Tables through which we can find Values, We dont have any Table for UPDATED Values.
Help me.
General Problem
I need to create a set of rows every time a new row is inserted into a table.
Example (I think this would work)...
select @insertedId = column1 from insertedselect @id = column1 from table1 where column2 in (select column1 from table2 where column2 = @insertedId)insert into table3 values(x, y, @id)
Is it possible to do the same kind of thing in a situation where the select statement returns multiple values and execute the insert statement for each of these values?
Also, if table3 was in fact the table on which the trigger acts, would it then be executed for every row created by the trigger?
Sorry if I sound confused. I am.
hi everybody..i tried to put thios loop in sql server 2000 But it is not taking The @ action taken value ,,it is only taking the default value of @actiontaken value.
SET @ActionTaken = 'A'
IF (@AType = 'A')IF @Status= 'O' IF (@KAppInd ='Y' AND @DAppInd=null)BEGINSET @ActionTaken = 'O'END
Please tell me other option in sql server 2000 for setting variable value based on conditions
Hi using triggers i try to insert some values in to my 2 tables: But its showing teh error as "The request for procedure 'Triginsert123s' failed because 'Triginsert123s' is a trigger object." This is my code in back end: sqlcon.Open() Dim cmd As New SqlCommand("Triginsert123s '" & txtID.Text & "','" & txtName.Text & "','" & txtRole.Text & "','" & txtDep.Text & "'", sqlcon) cmd.ExecuteNonQuery() sqlcon.Close() My trigger is: CREATE TRIGGER Triginsert123s ON [dbo].[EmpRole] FOR INSERT AS declare @Eid as tinyint, @Ename as varchar(50), @Role as char(10) Insert into Emprole(Eid,Ename,Role) values(@Eid,@Ename,@Role) insert into empdep(eid,dep) values(@eid,@Role) Whats the probs?, Plz i am new to triggers help me,
View 3 Replies View RelatedHi All,
I'm using triggers to handle my transaction log to cature inserts and updates. It works fine except if the user clicks on the Save button more than once, the trigger is fired and the record is written to the log even if the record wasn't changed. Does anyone know how to check if the record was actually changed so that it isn't written to the table if it wasn't?
Thank you,
Mike
When I execute a stored proc from my asp.net page, will the results of a trigger be returned to my program?
For instance say my stored proc is:
Update Employees set
(Lastname = @Lastname)
where ID = @ID
And my trigger is:
CREATE TRIGGER tr_Employees_U on Employees FOR UPDATE AS
IF UPDATE(lastname)
BEGIN
RAISERROR ('cannot change lastname', 16, 1)
ROLLBACK TRAN
RETURN
END
GO
It seems like since this is an AFTER trigger that my webpage would actually get a valid return code from my stored procedure however the trigger would rollback those changes correct? Or would the trigger get fired and send it's return code to my webpage?
I'm trying to write an instead of trigger for a view in SqlExpress...the table and views are defined as such:CREATE TABLE [dbo].[Work]( [WorkID] [int] IDENTITY(1,1) Primary Key, [ResourceID] [int] NOT NULL, [TaskID] [int] NOT NULL, [WorkDate] [datetime] NOT NULL, [WorkQuantity] [float] NOT NULL, [IsEstimate] [bit] NOT NULL DEFAULT ((0)), [Project] [int] NOT NULL,);CREATE VIEW [dbo].[ActualWork]ASSELECT WorkID, ResourceID, TaskID, WorkDate, WorkQuantity, ProjectFROM dbo.[Work]WHERE (IsEstimate = 0);CREATE VIEW [dbo].[EstimatedWork]ASSELECT WorkID, ResourceID, TaskID, WorkDate, WorkQuantity, ProjectFROM dbo.[Work]WHERE (IsEstimate = 1);Given that, what is wrong with the following create trigger statement:Create Trigger trg_InsertActualWork ondbo.ActualWork Instead of InsertasBEGIN Insert into dbo.Work( ResourceID, TaskID, Project, WorkDate, WorkQuantity, IsEstimate ) values ( inserted.ResourceID, inserted.TaskID, inserted.Project, inserted.WorkDate, inserted.WorkQuantity, 0 );END
View 3 Replies View Relatedl'm trying to build a trigger on a table. The reason for the trigger is to check a certain field for the first three characters if it has ie abc it must update another field in this case loanbook to newabc.How do l write the trigger so that it also check if exists and perform the updates. Please help its Urgent. l've listed the trigger below.
CREATE TRIGGER UpdTest_TRGData
ON Test_TRG
FOR insert,Update AS
IF left('Loan_No',3)='ABC'
update Test_TRG
set loanbook = 'NEWABC'
else
IF left('Loan_No',3)='DEF'
update Test_TRG set
loanbook = 'NEWDEF'
where loanbook is null
else
update Test_TRG
set loanbook =left('Loan_No',3)
where loanbook is null
I'm a bit confused on this bit please elaborate : " FROM Test_TRG t INNER JOIN inserted i ON t.PK = i.PK ".
The PK is on which field? Basically this trigger should ensure that on insertion of o new loan if
The left(loan_no,3)=MCG and its null then NEWMCG
left(loan_no,3)=MCG and its null then NEWMCG
left(loan_no,3)=KVS and its null then NEWKVS
left(loan_no,3)=MFS and its null then MFS
left(loan_no,3)=TCR and its null then TCR
left(loan_no,3)=ABL and its null then ABL
Listed below is what l've tried to do but l'm missing the PK part.Otherwise everything else you explained
in the script is clear. Thanks man its urgent. When l parse the query its fine , but When l run it
l get an error.
CREATE TRIGGER UpdTest_TRGData
ON Test_TRG
FOR INSERT, UPDATE
AS
UPDATE Test_TRG
SET LoanBook = CASE WHEN LEFT( i.Loan_No, 3 ) = 'MCG' THEN 'NewMCG'
WHEN LEFT( i.Loan_No, 3 ) = 'KVS' AND i.LoanBook IS NULL THEN 'NewKVS'
WHEN LEFT( i.Loan_No, 3 ) = 'MFS' AND i.LoanBook IS NULL THEN 'MFS'
WHEN LEFT( i.Loan_No, 3 ) = 'ABL' AND i.LoanBook IS NULL THEN 'ABL'
WHEN i.LoanBook IS NULL THEN LEFT( i.Loan_No, 3 )
END
FROM Test_TRG t INNER JOIN inserted i ON t.PK = i.PK
-- Fill in Primary Key or other Join Column(s)
WHERE LEFT( i.Loan_No, 3 ) = 'MCG'
OR ( LEFT( i.Loan_No, 3 ) = 'KVS' AND i.LoanBook IS NULL )
OR i.LoanBook IS NULL
====== Error message =================
Server: Msg 207, Level 16, State 3, Procedure UpdTest_TRGData, Line 11
Invalid column name 'PK'.
Server: Msg 207, Level 16, State 1, Procedure UpdTest_TRGData, Line 11
Invalid column name 'PK'.
I an loading records from a flat file into a table, which is done everyday by a scheduled job in SQL Server 7.0.
How can I make sure that if the job is run twice in a day for some reason that the same rows are not inserted into the table again? Do I have to write a insert trigger on the table ??? If so how can I achive the objective ??
Hi! i have a simple question...is possible to create a trigger who affect multiple tables?
The idea will be something like this:
create trigger mytrigger
on sales, users
as...
of course, this don´t work :)
Hey everyone...
I'm working on trying to figure out how to update the child table from the parent via a trigger. This works fine as long as the value is in the child table. If it's not, then I get my foreign key violation. So, My next thought was to simply put in a begin tran / rollback tran within the trigger... My question is this : If I have multiple triggers on the parent table all based on the update of the key field (and the child tables... some 7 of them) all have FK's, if I rollback one trigger does it rollback the entire transaction? Or just the functionality of that trigger? From what I've read, it appears as if it's the entire transaction... if so, how do I get a trigger to 'ignore' itself or not fire based on a select criteria that i have within that same trigger...
Thank you...
I just tried creating my first trigger and I'm a little bit confused. I am trying to see if certain fields have changed and will do that by checking the values of the fields in the "master" table and the "Inserted" table. I wasn't sure which table would have the old data and which would have the new, so I created the following trigger to help me determine which was which:
CREATE Trigger upd_cost_master On tbl_cost_master
For Insert, Update As
Declare @U_Name varchar(65)
Declare @O_Name varchar(65)
Select @U_Name=I.submitted_by, @O_Name=O.submitted_by
From tbl_cost_master O Inner Join Inserted I On O.autokey = I.autokey
Print 'Inserted: ' + @U_Name
Print 'tbl_cost_master: ' + @O_Name
Commit Tran
To my surprise, @U_Name and @O_Name contained the same values. I though that one table contained the old values and one contained the new. Was I wrong? If so, is there anyway to compare the Old and New values through a trigger?
Chris
Hi,
I'm using SQL Server 7.0. I have an insert trigger on table t05r. I populate table t05r with a DTS package. The trigger is supposed to add the record which was inserted into t05r, into t39r. After I run the DTS package to populate t05r, I checked t39r and no records where added. What is going wrong? Is it that DTS uses bulk copy and triggers don't fire on bulk copy?
Any help would be greatly appreciated.
Thanks in advance,
Darrin
I have an insert trigger on table A which inserts records into table B.
This insertion into B fails( or may fail ) at certain conditions.
I do not want the insertion into A to be affected because of this. Any ways to achieve this ?
Hi,
I have 3 tables A,B C and Triggers on each table like.
for insert/update on table 'C' calculates sum(xxfield) and updates
table 'B'.
for insert/update on table 'B' calculates sum(yyfield) and updates
table 'A'.
This works fine if I insert rows OneByOne.
Problem :- Doesn't work if I post entries(hundreds) in to table 'C' using a Query.
whats happening. Can anyone help Me????????
How do I know if the triggers on table has been disabled or not. Thanks for your ideas!!!!
View 3 Replies View RelatedHello,
I've update triggers on my table, But for some of the transactions, I don't want the triggers to fire. I know in Sybase there are set triggers off. In MS SQL, Is there any similar commands which will set triggers off for particular sql statements.
Thanks A Lot
Sejal
Hi! I am having trouble with setting triggers while doing my project. The project is on ATM machine driven through SQL. So I have Date of Transaction in one table and Account Expiry in another.
I want to set the trigger to check Account expiry when doing transaction so i wrote T-SQL
select........
getDate()-Dateoftransaction=expiry
begin '...'
end
the system saying I have got an error near the word 'begin'.
I am desperately needing help. running out of ideas.
Thanks in advance.
I need to create an after insert, update and delete trigger on the same table. Can I create one trigger that would have all three operations in it or I need to create three separate triggers? Thanks for your help.
View 3 Replies View RelatedI have not used triggers before and wanted to know if it was approproate for my issue:
When a new user registers via the web, a record is inserted into the "student" table. I would also like to insert a record into the "StudentCourse" table that adds this new student to a class (studentID, CourseID). I thought I could look into a trigger or stored procedure for this. The problem is that I do not want to mess with the programming side of it as it is an off the shelf system and written in Java/JSP, so I would like to handle this in the DB.
Thanks in advance,