Hello,
We're new users of SQL Server 2005. I created two maintenance plans...one to backup the database at 2 AM daily and one to back up transaction logs every 30 minutes. These maintenance plans write to a local disk. What we want to do, within the maintenance plan, is copy the files as soon as they are written to a remote server. Is that possible?
Thanks in advance.
Are there any known issues using Maintenance Plans to backup DBs in SQL Server 7.0
Thanks
I am doing full backups on 25 databases nightly using the SQL maintenance plan. Recently I have started getting the backup process hung on one database, so the whole plan does not finish. The job shows as executing, but nothing is being done, and nothing has been written to disk for this database. The SQL logs show a DBCC TRACEON 208, but the process it refers to is using another database. The NT logs do not show anything going on either. Additionally the backup process will not die when it is killed. They only way to make it go away is to stop and start the SQL Server. The system is a quad Pentium 450, 2Gig of ram, and plenty of disk space. It is NT SP5, SQL7 SP1. The DB is about 8.2 Gig. There are no other jobs scheduled to run at the time the backups run. Does anyone have any ideas what would be causeing the process to hang? Also what is a trace flag 208, it is not listed in BOL. Thanks for your help.
View 1 Replies View RelatedI have a maintenance plan that I use to backup some of my databases and transaction logs. I have "Check Database Integrity" checked. If the database is being used by anyone when the backups are being performed, the check issues an error because the DB cannot be put into single user mode and then skips the backup. In the Plan, I have unchecked the box for "Perform these checks before backing up the database or transaction file" and apply the change. When I go back into the plan, the option is checked again. How can I get around this problem?
Thanks,
Ken
I have a maintenance plan where I backup the system databases and my application databases every night. Once a week I do a Check Database Integrity. For the Master and MSDB databases, it errors out telling me that the database must be in single user mode. I thought that the maintenance plan would switch the DB to single user mode when it needed to perform its checks. Any suggestions on how to get this to work successfully?
Thanks,
Ken Nicholson
I'm running sql server 2000. All the backups created through the Maintenance Plan failed (no specific error code), whereas backups created by itself (through database name => All Tasks => Backup database...) run fine. Does anybody have a clue why the Maintenance backup failed or how to trouble shout the problem?
The reason I want to make the backups from maintenance plan to work is that each backup will have a unique name and I can schedule to remove the old backup files from the system.
Hi,
I have made a maintenance plan to backup a database.
The file name is like this: name_db_200606211209.BAK
isn 't it possible to get the filename to be always the same
(without 200606211209)
I have unchecked the checkbox to remove files older than x-days
but it still appends 2006... to it
I'm using below script within the execute T-SQL statement task of the maintenance plan, which is created to delete the zip files older than 2 days, the task runs before the backup database task gets kicked off, but some how the task is not deleting the old .zip files.
Code being used within the task: output of the @delete_file variable within the delete command is Del X:SQLBackup*2015_05_06*.zip before it is passed to the final exec statement, the server is in EST time zone.
declare @ConvertDate char(10)
declare @Delete_file varchar(80)
set @ConvertDate = CONVERT ( char(10) , dateadd( dd, -2, getdate()) , 121 )
[code]....
Good morning.
We are running SQL Server 2000 with SP3. I have recently created a DB Maintenance Plan to backup all of our databases nightly to a local tape drive, and verify the backup of those databases. The backup plan itself runs fine.
The first time it ran, it ran in a little over an hour. Since then, I have noticed the time increasing nightly to the point that last night's backup took 8 hours. Our databases are not that big and do not have enough transactions to cause such a drastic change in a matter of weeks.
Investigating the problem, I have found that the issue lies in the fact that the tape is not initializing each night, and thus each night's backup is appending to an increasingly more full tape.
My question is this: Is there a way to force a DB Maintenance Plan to initialize the tape each night? I know that I can probably add a "with init" command to the T-SQL statement created, but I am not sure exactly where to fit it in. Does anyone have any suggestions?
Thank you for your time.
Michael
Hi there
I feel like a complete nitwit. I've been using SQL 2000 for about 5 years now and regularly set up automatic backups using the wizard for many people. I'm in no way an advanced user and have enjoyed some of the more user-friendly features of SQL 2000 such as the backup wizard.
Well now we have SQL 2005 and I can't find the "wizard". I did a lot of googling and found very little on this. The frustration is mounting - let alone the fact that I had to edit the registry just to be able to perform a manual backup in the first place... :-(
Apparently their is a "maintenance plans" folder but the only place I can find this is under "Legacy" and you can't create jobs there.
Has anybody else had this issue? Is there a bug in SQL 2005? I reinstalled the full version with all options selected and still can't find this folder. Am I just being completely "blonde"?
Hi All,
I'm about to embark on creating a maintenance plan to back up all databases on one of our SQL 2005 servers. I am looking for some advice on best practices for doing this.
I have it in my mind that i want to be taking a full database backup once a week, with differential backups on a daily basis and transactional backups performed every 2 to 4 hours.
Do i need to create three maintenance plans for this, i.e. 1 for full, 1 for differential, and 1 for transactional?
If i want to only keep the backups from the last week, is this done by setting up a maintenance cleanup task in the full backup plan to clear all bak files that are a week old?
If so i'll also probably require one to remove the trn files also.
When using the backup command from the context menu in SSMS there is an option to name the backup set. How does this work when using maintenance plans as i haven't been able to find this option whilst trying out some of the features?
I'm sure to have more questions on this subject, but any help on the above queries would be most appreciated.
TIA,
Grant
In SQL 2005...
How do I specifty in the maintenance plan to only keep 3 days worth of backup.
Andre
What is the method to execute backups from batch (.bat) files on the server running SQL Server. I have tried the sqlmaint command - doesn't seem to execute, looked into the xp_sqlmaint with no luck. I'm sure the problem lies in my lack of DOS batch programming skills. If anyone has an example of a batch file that executes a backup would you mind sharing. thanks
View 6 Replies View RelatedI am getting a failure on the db backup job of one of my maintenanceplans. It is coming back with the generic error message of,"sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The stepfailed."I then checked the Database Maintenance Plan History page, but thisshows all the steps having run successfully. If I check the drives forthe actual backup files, they exist and look healthy too!There is plenty of space on the drives, so it is not that.I've checked the NT logs and all they say is,"SQL Server Scheduled Job 'DB Backup Job for DB Maintenance Plan 'DBMaintenance Plan for All User Databases''(0xC06E15E2A9E1414087BE19541D167861) - Status: Failed - Invoked on:2005-06-29 21:00:04 - Message: The job failed. The Job was invoked bySchedule 35 (Schedule 1). The last step to run was step 1 (Step 1). "Which doesn't give me any clues.Since the backups have actually run to success, I am going to take offthe option on the maintenance plan to "Verfiy the integrity of thebackup upon completion". Maybe it is this that is causing problems,rather than the backup?Anyone had anything similar?
View 4 Replies View RelatedI am using SQL server 7.0. After restoring all the databses (Exceptdistribution) Everything seems to be working fine except the backupmaintenance plan. I put following detail in the maintenance plan"General Tab:Plan Name --- DB Maintenance Plan1() All DatabasesOptimizations tab:Reorganize Data and Index PageChange free space per page percentage to 10%Remove unused space from database filesShrink Database when it grows beyond 50 MBAmount of free space to remain after shrink 10% of the data spaceSchedule: Occurs every 1 week(s) on Thursday, at 1:30:00 PM.Integrity tab:Chack database integrityInclude indexes.Attempt to repair any minor problemSchedule : Occurs every 1 week(s) on Thursday, at 1:00:00 PM.Complete Backup tab:Backup the database as part of the maintenance planVerify the integrity of the backup upon completionDisk use this directory: d:SQL BackupsBackup file extension: BAKSchedule: Occurs every 1 day(s), at 2:10:00 PM.Transaction Log Backup tab:schedule: Occurs every 1 day(s), at 2:00:00 PM.Reporting tab:Write report a text file in Directory: D:SQL BackupsLOG "Problem:My databases(mroduction as well as systems) sre not at all gettingbacked up according to above plan.Error Message in the Log Directory:"Microsoft (R) SQLMaint Utility (Unicode), Version [Microsoft SQL-DMO(ODBC SQLState: 42000)] Error 4062: [Microsoft][ODBC SQL ServerDriver][SQL Server]Cannot open user default database '<ID>'. Usingmaster database instead."In the SQL server registration properties the login through whichgetting logged into the EM for that, default database is "my productiondatabase".Is this problem because of the distribution db which I am not able torestore.Please helpDeepak Sinha
View 1 Replies View RelatedI have used google and searched these forums but haven't found an answer.
Here is my problem:
I have MS SQL 2005 DB I need to backup to tape daily. I want the tape to eject (or unload) when it is complete. I know how to do it with a manual backup (simply check off the option), but there aren't any options I can see with a Maintenance Plan backup. I would rather not do a manual backup EVERY DAY.
I really don't understand why MS makes this so complicated...why would the option be in another area when you use a maintenance plan???
Thanks for replys!!!
I was once told that I was not to use the GUI to setup a maintenance plan. What the person said was that I needed to setup a different plan to do each tab of the GUI instead of going through the tabs and making sure the times do not overlap.
Has anyone ever heard of this or is this an old wise tale told by only one person?
I am using version 8 of SQL on XP machines with 8 connections to that database and need to back up the database, clean it up and everything the GUI has, so teach me the correct ways and tell me why, thanks!
Hi,
I have created an sql server 2005 maintenance plan for a daily backup. The plan has two 'Back up database task' i.e. one backup on the local drive while the second on a network drive. When the plan is executed, a backup is created on the local drive but not on the network drive. If i check the log, it says "Access Denied" whereas i have full access to the network drive with complete permissions to read, write and delete.
Can anyone help me understand how to take a backup on both a local and network drive at the same time using a maintenance plan ? I shall be obliged...
Regards...
I have a maintenance plan set to back up my 2 primary databases, one about 1 GB, the other about 2GB. I have about 4 GB available on the back up drive. I have set it to delete old backups more than 1 minute old. Problem is, the first night it works fine, the second night it sometimes it refuses to delete the old and therefore does not have enough space to complete the new back-up. Does anyone run into this before? Does it complete both back-ups THEN erase the old, in which case I need to have about 6GB available? Sometimes it works and sometimes it doesn't. It can be going along fine for weeks then stop working. Any info or links to how this is supposed to work would help.
TIA
Hello,
SS2k5 - 9.00.3050 (x64) - Most current SP
I've created a backup maintenance plan 'All User Databases'. Plan saved and executes.
Modify plan to add new subplan step to remove old backup files, save fails with a Studio Dialog encapsulating the message -> No Description
Cannot save the Maintenance Plan.
Any ideas about how to save the Plan?
Thank You... Covi
Has anyone been able to successfully delete old backup files(*.bak) and tran logs (*.trn) TOGETHER using maintenance plan cleanup task in SQL 2005 SP2.
this is transact sql running in the back ground.
EXECUTE master.dbo.xp_delete_file 0,N'F:MSSQL.2MSSQLBackupibmdir',N'"bak" & "trn"',N'2007-03-26T22:21:14',1
This DOESNT WORK.
It works if I just try to delete only one of the things ie trn or bak files.
EXECUTE master.dbo.xp_delete_file 0,N'F:MSSQL.2MSSQLBackupibmdir',N'bak',N'2007-03-26T22:21:14',1
But is there a way to delete both bak and trn files using one task ?
I get the following message when I execute a mantenance plan to delete files older than 1 day.
Error # -1073548784
Executing the query "EXECUTE master.dbo.xp_delete_file 0,N'',N'',N'2007-09-30T07:56:09'
" failed with the following error: "Error executing extended stored procedure: Invalid Parameter". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Any help would be appreciated!!
Hello, everyone:
I have a backup plan that remove the old backup files more than two days. Last Monday, the SQL Server restart. Since that, the backup is fine, but it didn't remove the old backup files. Why and how to handle that? Thanks
ZYT
I need to copy a just-created bak file to another drive after the backup task has completed. I don't see anything in the job toolbox which works with file system operations like this. But still it must be a common need..There are ways to script this or use third part tools but I am looking for something native to the sql server 2012 SSMS toolset, if possible.
An alternate approach would be to run the backup job again, after the main backup, and change the destination to the alternate location. But I was thinking that another backup job would probably invoke more overhead on the server than a simple file copy operation. If I do end up taking this approach I could also use the cleanup task to toss older bak files in the alt dir.
I have some simple files but they are failing because the delete history task is failing as it is looking for files in a non existent directory.
It is looking for files in C:Program FilesMicrosoft SQL ServerMSSQL10_50.INSTANCEMSSQLLog whereas it should be looking in C:Program FilesMicrosoft SQL ServerMSSQL10_50.MSSQLSERVERMSSQLLog
how I can get this corrected so I can get the Maintenance Plans to run correctly.
I have tried deleting and recreating the Plan but to no avail
I've an emergency requirement to copy Source server database backup files to destination Server through xcopy command. Backup job on source server runs daily, so once this job get completes all databases backups needs to be moved to destination server. But here the main concern is "the backup files on destination server shouldn't be overwritten, they should be placed separately as Source server job runs daily".
We've a command which overwrites backups on destination server. But we need to keep backups on destination at-least for 4 weeks (means : retention should be 4 Weeks).
Hello,
I have a question that I hope someone can clear up for me. I have come across a number of different suggestions on DB maintenance, for example reindexing with the following script:
USE DatabaseName --Enter the name of the database you want to reindex
DECLARE @TableName varchar(255)
DECLARE TableCursor CURSOR FOR
SELECT table_name FROM information_schema.tables
WHERE table_type = 'base table'
OPEN TableCursor
FETCH NEXT FROM TableCursor INTO @TableName
WHILE @@FETCH_STATUS = 0
BEGIN
DBCC DBREINDEX(@TableName,' ',90)
FETCH NEXT FROM TableCursor INTO @TableName
END
CLOSE TableCursor
DEALLOCATE TableCursor
My question is, doesn't the maintenance plan have this functionality inherent in it when you create the maintenance jobs to reindex? Is there a benefit to scripting things out vs just using the maintenance plan wizard for this sort of thing and any of the items it covers? I came from an Oracle background where this was a no-brainer but I am a bit confused on the choices with SQL Server.
Thanks.
We are having a problem with trying to backup the database device and log DAT files located in the MSSQLData directory.
The Seagate Backup Exec. states that the files are busy and skips them during its backup cycle. It skips all the devices in the
directory.
Any suggestions?
I have deleted a database from SQL Enterprise Manager. Anyone know a way to clear that database from my maintenance plan? I do not wish to just uncheck the deleted database or create a new database plan.
Thanks!
Hello All
I have been given a SQL Server 2000 database to look after which has been set up with a Database maintenance plan. The plan is set to backup the complete database and the transaction log. The backups are written to the local disk correctly but the plan is also set to remove any backup files (both database .BAK and transaction log .TRN) that are over one week old. Complete database .BAK files are written daily and the .TRN are written every hour daily. The .BAK files are removed ok automatically but the .TRN files are not - they are just slowly filling the disk. There does not seen to be anything different between the way the main database and the transaction log is set up in the maintenance plan.
I would be very grateful for any ideas
I have a strange thing in one of our Maintenance plans.
On the first tab where you check which databases you're including in the plan I have (say my database name is CAT) a 'CAT' and 'cat' database listed and the one chosen is 'cat'. However my database in all other views shows up in all caps. (even when I do an sp_helpdb)
The backups look like they're working, etc. but it just seems weird. If I go to create a new plan it only gives me the one option 'CAT' which is really what's there. I'm new and I'm thinking the database at one time was 'cat' and this is when the maintenance plan was created. Then it was renamed to 'CAT' and there's the two db's showing in the old mainenance plan.
What would you do? Create a new plan with "CAT" and just get rid of the old one with the weird 'cat' and 'CAT'?
Any other suggestions or ideas on what happened..
ann
I've created a database maintenance plan to backup a database, but it just
isn't happening, am i missing something. The maintenance plan appears to be
created successfully.
responses appreciated.
thanks
Todd Minifie
Can you generate script for a maintenance plan?
I know how to script a job, I was wondering about a plan.
If not, whats the best way to record the configuration?
Thanks
Lystra