Copy Table With Constraints
Nov 29, 2007
I'm trying to find a Stored procedure that will perform a complete table copy from the source to the target.
Anyone have one?
ADVERTISEMENT
Reporting Services :: Copy Table From One To Another Server With Primary And Foreign Key Constraints
Jun 9, 2015How to copy a table from one server to another server with primary and foreign key constraints.
View 5 Replies View RelatedCopy A Database Table With All Its Data, Indexes And Constraints To A New Table In The Same Database
Feb 4, 2008Hi,
How can I copy a database table with all its data, indexes and constraints to a new table in the same database in sql server 2005
Copy Tables And Keep All The Constraints???
Feb 4, 2005I want to make a copy of a table and this table has several constraints and
I would like to keep all of them
How should I do it? Thank you
Replication :: Copy Foreign Key Constraints Value Is Always False
Sep 23, 2015I want to replicate the foreign keys to secondary.I changed the value Copy foreign key constraints value is to True.
I changed this value at pub properties - Articles -
And then it is asking for MARK for reinitialization with the new snapshot.I clicked ok.
When I checked sync status it has given the message like initial snapshot is not yet available.I started the snapshot and the subscription started replication records.When check at pup properties the value Copy foreign key constraints again false.
After changing the value to true it is showing as False.
UGH! Failed To Enable Constraints. One Or More Rows Contain Values Violating Non-null, Unique, Or Foreign-key Constraints.
Jan 9, 2007I know this is probably a flick of a switch but I cannot figure out which switch. Setup is SQL Server / Stored Procedures / DAL / BLL(skipped for testing) / PL. The stored procedure queries from only one table and two columns are ignored because they are being phased out. I can run the stored procedure and preview the data in the DAL but when I create a page with an ODS linked to the DAL and a GridView I get this error. I checked every column that does not allow nulls and they all have values. I checked unique columns (ID is the only unique and is Identity=Yes in the table definition). I checked foreign-key columns for values that are not in the foreign table and there are none. Any ideas why do I get this?
Failed to enable constraints. One or more rows contain values violating non-null, unique, or foreign-key constraints.
Failed To Enable Constraints. One Or More Rows Contain Values Violating Non-null, Unique, Or Foreign-key Constraints.
Jan 17, 2008Hi,
I am getting the above error when trying to load a report into my Web Application, I have tracked the error down to one specific field in my database. Even though this field is a NVarChar field and is of size 30 it would seem that there is an issue returning the value from the field. I can write it into the database no problems but when I try to get it out of the database it returns the above error.
e.g
MOB 401.908.804 - Fails
0401.907.324 - okay
8239 9082 (pager) - fails
Anyone got an idea on how to fix this????
Regards..
Peter.
Table Constraints
Sep 25, 2002Can anyone recommend a good article/book on the subject? I am trying to find out more about compound primary keys. How many is too many? Does the number of primary key columns affect your performance? If so, how does it affect it? Should some of the constraints be handled from stored procedures?
Any response is greatly appreciated.
:cool:
How To Get All The Constraints On A Table
Jul 28, 2006Hi,
I am new to MsSql. I want to know is there any command through which we can get all the consraints on a table or in a databases. In the same way how to get the all table names in a database from the coomand prompt or thorugh query analyzer.
Thanks
Table Constraints
Aug 11, 2006Hi all
Is there anyway you can deactivate/enable all constraints on a particular table so it can be done in a script?
Thanks.
Table Constraints Question
Feb 22, 2008Does anybody know how to query for the table constraints, indexes etc..
I believe there are sys tables that contain these but I'm not familiar with them any help would be appreciated.
Viewing A Table's Constraints?
Apr 10, 2008This is an SQL Server 2000 question. Without having access to the "Design Table" option in the pop-up menu of a table, is there another way to see what constraints, indexes, primary key, etc. that a table has?
Thank you.
Table Constraints To XML In SQL-Server 2000
Aug 4, 2006Hi,
I am DB programmer, How can i get Table Constraints to XML in SQL-Server 2000 with out data.
How Do I View Table Information Such As Constraints?
Sep 19, 2007I remember once using a command in Query Analyser that gave me all theinformation about a table. It showed details about the columns,constraints, keys, indexes etc.I can't remember how I did this? Can anyone help me?It could of been a stored proc that I called or a query on the systemtables.I do know that it was very simple to do and it was executed in QueryAnalyser.Can anyone help me?
View 2 Replies View RelatedSyntax To Add 2 Constraints Using Alter Table?
Jul 20, 2005Just started learning SQL recently.But one thing i'm still not clear on is about altering relationships betweentables after they've been created.Instead of creating a foreign key when the table is first created - i createthe table and then run a query to set the foreign key and relationship(one-to-one, one-to-many etc)Anyways, long story short is i want to create a one-to-one relationship witha table but am having problems with adding more than one constraint at atime when altering a table.Understand yet? Easiest thing to do is show you:I have 2 tables: Branch_Table and Employee_TableI want to create a one-to-one relationship between emp_id on theBranch_Table and manager_id on the Employee_Table.The SQL i've written which doesn't seem to work is:ALTER TABLE Branch_TableAdd Constraint Branch_Table_FK1 FOREIGN KEY (manager_id)Add Constraint Branch_Table_UQ1 Unique (manager_id)References Employee_Table (emp_id));Am having trouble with that second Add constraint (UQ1 unique). I know it'ssomething to do with the Add syntax above.So basically, my question is can i create a one-to-one relationship withjust the one SQL Query? And how would i do it?Many thanks in advance.
View 6 Replies View RelatedTable Valued Function And Constraints
May 29, 2008
Is it possible to define a constraint for Primary Key on more than 1 column or an alternate index on a column in a return table from an inline table valed function?
Example Header:
alter FUNCTION [dbo].[fntMetaFrame] (@ii_CompanyID int)
RETURNS @tbl_MetaFrame TABLE ( pk_Key int Identity(1,1) primary key,
ObjectID int ,
Seq int null )
I want the primary key to be pk_Key, ObjectID
OR
I want to add another index on ObjectID.
DB Engine :: Migrate Table Data When Dealing With Constraints
Nov 19, 2015I need to script out data in several tables (30+) and then reload those tables on a different database. The "target" database table data will get overwritten each time, not appended to. Several of these tables have numerous foreign keys and other constraints that must be dealt with. None of them have more than 100 records or so. Then I need to keep this script in source control and reference it as part of a post-deployment step with a Visual Studio DB project.
I have redgate, dbghost and visual studio. Are there any tools will generate the script for me complete with dropping all the constraints, truncating the tables, then re-adding the constraints back? Or, am I looking at simply scripting the table data out, then modifying the script myself to add in the steps to drop/readd the constraints? Further, since some of these tables might have relationships, not just to other tables, but to those in question, there will likely be an order in which the tables need to get loaded.
The approach I am thinking will be needed, since ive done this sort of thing before except with SSIS, is to run something like dbghost or the "generate scripts" option in SSMS as a starting point. From there, change the order around as needed, etc.
Data Access :: Adding Back Constraints To Table
Nov 11, 2015I have removed all constraints of a table.I have a copy of the database as back up, now how can i add back the constraints to the removed table.
View 6 Replies View RelatedDbo.Table Of A Database In The .SQLEXPRESS Object Explorer: How To Copy The Dbo.Table To The Another Blank Dbo.Table?
Jan 9, 2008Hi all,
The following dbo.Tables of Northwind.mdf in my .SQLEXPRESS (SQL Server Management Studio Express) are missing:
dbo.Categories
dbo.CustomerCustomerDemo
dbo.CustomerDemographics
dbo.Customers
dbo.Employees
dbo.EmployeeTerritories
dbo.Order Details
dbo.Orders
dbo.Products
dbo.Regions
dbo.Shippers
dbo.Suppliers
dbo.Territories.
But, I have these dbo.Tables in a different Database "xyzDatabase". How can I copy each of these dbo.Tables to the another blank dbo.Table of Northwind Database?
I right clicked on the dbo.Categories and I saw the following thing:
dbo.Categories
New Table...
Modify
Open Table
Script Table as |> CREATYE To |>
DROP To |>
SELECT To |>
INSERT To |> New Query Editor Window
File....
Clipboard
UPDATE To |>
DELETE to |>
From the above observation,I think it is possible to copy the dbo.Table from the one Database to the Northwind Database that needs to be repaired. Please help and advise me how to do this task or tell me where I can find the Microsoft document that gives the details of this X-copy thing.
Thanks in advance,
Scott Chang
P. S. I am using VB 2005 Express to create a project to learn "Calling Stored Procedures with ADO.NET" (see Paul Kimmel's article in http://www.developer.com/db/article.php/3438221) that needs the dbo.Tables of Northwind Database and my Northwind Database has been screwed up for quite a while and needs a big repair.
Temporarily Drop FOREIGN KEY Constraints To Truncate A Table After Testing
Feb 21, 2007
I am testing Insert, Update etc. and messing up my database with "dirty" data. Is there a way to temporarily drop FOREIGN KEY constraints to truncate a table after testing without dropping the whole table and rebuilding it?
Newbie
Tables Created By SELECT INTO Inherit Parent Table Constraints!
Feb 1, 2008Hey there,
Trying to build a temporary table based on a parent table such that:select * into #staging from tbl_parent where 1=0
The temp table (#staging) picks up any NOT NULL constraints from the parent (tbl_parent) table and frankly, it doesn't meet my needs.I also tried to build a view of the parent (tbl_parent) table from which to base my SELECT INTO and still, the constraints followed.
I'm thinking perhaps it possble to iterate though the temp table using syscolumns sysobjects and and set the column NULL properties on the temp table AFTER its been created but in this approach, I'm working to avoid directly referencing the columns by name.
Is this possible? A better answer perhaps?
Purpose of exercie is to populate a record in memory before it hits the table.I'll be constructing the record on the fly so that at first, I won't have all the fields to de-Null the columns.Also, I don't wish to lose the fact that some of my fields are Null - once I've fully populated my temp record, I'll insert into my 'real' table and will depend on constraints to throw the appropriate error. In this I won't have to built custom error checking in the stored procedure itself but instead depend on SQL SERVERS built capacity to the throw the error. This opens a bunch of possibilities for extensibility since if at a later date a constraint rule changes, one need only change the parent table definition rather than cracking open the stored procedure.
Thank you for reading and a big thanks to you for replying :)
Also,
Stored Procedure To Copy Table 1 To Table 2 Appending The Data To Table 2.
Jan 26, 2006Just wondering if there is an easy transact statement to copy table 1 to table 2, appending the data in table 2.with SQL2000, thanks.
View 2 Replies View RelatedSQL Server 2008 :: When Renaming A Table / It Doesn't Rename Foreign Key Constraints
Sep 21, 2015I'm working on creating a new version of an existing table. I want to keep the old table around, only with a different name. In looking this up I found there's a system routine named sp_rename, which looks like it will work fine.However in thinking about this I realized that the foreign key constraints defined on the table (there's 3 of them) are likely to not be renamed, correct?
If I'm correct, then I suppose I could rename the table, then drop the 3 foreign key constraints, and create them new using different names for those foreign key constraints.
Transact SQL :: Delete All Records Using FOREIGN KEY Constraints If Main Table Entity Is Deleted
Oct 29, 2015How to delete records from multiple tables if main table’s entity is deleted as constraints is applied on all..There is this main table called Organization or TblOrganization.and this organization have branches which are in Brach table called tblBranch and this branch have multiple applications let say tblApplication and these application are used by multiple users called tblUsers.What I want is: when I delete the Organization All branches, application and users related to it must be deleted also.How I can apply that on a button click in asp.net web forms..Right now this is my delete function which is very simple
Public void Delete(int? id){
var str=”DELETE FROM tblOrganization WHERE organizationId=”+ id ;
}
And My tables LOOK LIKE this
CREATE TABLE tblOrganization
(
OrganizationId int,
OrganizationName varchar(255)
[code]...
How To Copy A Column(or Colums) From A Table In One Database To Another Table In A Different Databas
Oct 1, 2001How do I copy a column(or colums) from a table in one database to another table in a different database
View 1 Replies View RelatedCopy Rows To The Same Table And Its Related Data In The Other Table
Nov 23, 2007Hi All,
I have 2 tables People & PeopleCosts.
PeopleID in People Table is the primarykey and foreign Key in PeopleCosts Table. PeopleID is an autonumber
The major fields in People Table are PeopleID | MajorVersion | SubVersion. I want to create a new copy of data for existing subversion (say from sub version 1 to 2) in the same table. when the new data is copied my PeopleID is getting incremented and how to copy the related data in the other table (PeopleCosts Table) with the new set of PeopleIDs..
Kindly help. thanks in advance.
Myl
Copy Records From One Table To Another Table With Same Structure
Jan 20, 2007Hi allI have two tables in SqlServer with Exactly Same Structure,I want to Copy all Records fromone of them to another one.I came across to "Insert....select..." statement But i have two problem
1) I don't know any thing about Columns name!!! i just know they have same structure and as far as i know , "Insert...select..." need the Column list to operate correctly, am i right?
2) these two table have One Prinary Key column with IDENTITY feature.
Any Help Greatly appriciated.Regards.
How Do I Copy / Insert A Primary Key Value Of One Table Into Another Table?
Dec 10, 2007
Hi i have set up two very simple tables, I want a user to be able to create a basic account ( data stored in User_Profile table with Id set as the Primery Key as Identity) I
want the user to be able to be able to return to their account at a later date
and then post multiple reviews of different bands they have seen at a later date.
I kept the tables in my example very simple so I could get my head
around the concept, but generally, I want to connect the Id (PK) value in
User_Profile table to the User_Id filed in the User_Review table,
so every review that user writes, will be connected directly to their Id.
Any help you could give would be fantastic a i have no idea where to start!!!
User_Profile
Id int, ( as primary Identity Key)
Name
City
Country
I have a second table called User Reviews
User_Revews
Revew_Id int , ( as primary Identity Key)
User_Id int, ( I want this to contain the Id value in
the User profile Table)
Review_Details
Thanks
Odxsigma
How To Copy One Column Data From One Table To Another Table
Nov 30, 2004Hi, All,
I have agentID in product table.
Now I add agentID column in transaction table. Now I want to copy all agentID from product table to transaction table based on the order_id
in both table. Can you show me an example?
Thanks
Betty
SQL2005 Peer-to-Peer Transactional Repl. Table Constraints
Nov 10, 2005I am researching the possible use of Peer-to-Peer Transactional Replication with SQL 2005 to improve the availability and scalability of the SQL-farm.
View 5 Replies View RelatedHow Do You Copy Table Data To Another Table?
Jun 21, 2007I need to copy existing row data from one table into a new row in a different table, both in the same database. Can this be done in a stored procedure where the selected row is passed in as parameter value?
Thank you,
Copy Table Structure To A New Table
Apr 24, 2005Hello everyone,
I have a local MSSQL server (I guess it's called MSDE), with some tables that I would like to use as a template for a set of new tables. I would simply like a Stored Procedure that takes these 3 tables, makes a copy of their structure (not data, since they will be empty), and name them by using a parameter given to the SP. I have made something that I thought would work, but after testing it a bit more, it seems to forget default values for the fields, which is of course not good enough :). I hope that someone can tell me how to duplicate these 3 tables, including every detail for the fields!
How To Copy Data From One Table To Another Table?
Apr 21, 2008Hi,
I need to recover a table.
I have restored completed database to a temp DB.
I do know,how to use export and import.
Any one can help me?
Regards,
Vinoth