Copying Database From 2000Server Machine To 2003 Server Machine
Jul 23, 2005
Hi All;
We are going to change our application server. We will copy all of our
Database from Mic 2000 Server OS to Mic 2003 Server OS. I found an
article that how to move all the folders from same OS. My question is
that Would the 2003 OS be a problem when we copy all of the MC SQL 2000
folders to New OS ? Has anybody done this before? Could you gimme your
suggestions please?
First of all let me explain that I am a complete newbie to this SQL stuff. I am in the process of reading a book, and followed the books suggestions for what I want to do, but it doesn't work. I know this has been covered several times in this forum, but no one post in particular covered exactly what I want to do.
I want to copy the database from the server to my local machine.
First, do I need to have SQL running on my machine in order to copy the database? I do have Enterprise Manager running, does that mean SQL Server is running locally?
Secoond, I tried using the Copy Wizard, but when I get to the target list, my local machine is not listed. How do I get it listed so I can copy the database?
I hope my questions are not too stupid... but then I'd be stupid if I didn't ask questions.
Sorry to break the threay i started earlier but once again I need this to work and I have spent al day on it with no luck.
SCOPE: I need to copy my database from my sql server 7 platform to another office on another server that also has sql 7. DTS will not work for me due to network traffic and so forth I would get messages saying that it failed. i tried it off/ peak time but still the same. Now in the days of 6.5 I would be able to creat a new db device for LOAD then I would copy the dump over there and run LOAD database blab blah .. No brainer.
I have tried the following ideas some of you have mentioned such as back up the db (I would zip it copy it over there ) unzip it and tried to RESTORE it but I get the following: "The backup set holds a backup of a database other than the existing 'mydb' database. Backup or restore operation terminiating abnormally."
I would also try restoring from FILE and I would get the similar message. Sp_attach and detach no good either.
What am I missing. i would create a new 'mydb' then try the restore all of the above is all I get...
If I use GetDate() function from client machine (using "\ServerMachineSQLExpress" instance from client machine "ClientMachine"), then from where I will get the DateTime value ?
I'moving my asp application to a new hosting server.
So when i tried the setup locally with the live DB & application in my test machine... The DB access is denied when application tries to hit the DB.
DB is in seperate machine with SQL Server 2000 & application(ASP) is in Windows server 2003..... Kindly help me with your suggestions....on what went wrong?
Help! I am using Script Transformation to output a new column as image[DT_IMAGE] field to store serialized object. In the VB script, the sample code as
The package always runs fine on my developing machine and will halt on other machine at AddBlobData after certain number row records were processed. I am stuck here. Anyone has any suggestion?
What I need is reading data from mutiple tables in one database and writing into a single table in another datable. In order preserve all the columns data, I use input column fields to construct a new object and then serialize it, and store the serialize data into detination db table. (The object and serialization function is coming from c# dll.)
Dim b As BusinessLicense = New BusinessLicense() b.ApprovalDate = Row.approvaldate b.BusinessId = Row.busid b.BusinessName = Row.busname b.NaicsCode = Row.naicscode b.NaicsDescription = Row.naicsdescr b.OwnerName = Row.ownername b.Phone = Row.phone b.Pkey = Row.pkey b.RenewalDate = Row.renewaldate b.StartDate = Row.startdate b.Suite = Row.suite
Row.serializedobject.AddBlobData(Serializer.Serialize(b)) '''----This is blocking line Row.infoType = BusinessLicense.TYPE
Both machine is xp with sp2. and standard SQL Server 2005 - 9.00.1399.06
Hi to everyone, I'm facing a problem that drives me crazy. I've a web application that has the following problem. When I test the application on my developement machine all runs fine, but when I put into production server there is a problem in connection pooling. Look at the following image, the blue line is the number of connection in the pool and the violet line is the number of connection reclaimed. From the image it is clear that connection are returned on the pool only in block, maybe when the garbage collection pass and reclaim the object. The strange thing is that on my developement machine all is good, and also I'm using Enterprise Library and the connection are managed internally.- Thanks to everyone for any help.
Hullo all I have two machines, One is a standalone machine and the other is on a domain network. How can I run a stored procedure/job on the standalone machine from the domain machine ? running the procedure as a Domain user results in a failed job/stored proc. also creating an sql login and attempting to run it as that user also fails. How can I solve this problem ? please e-mail me at wayde@sunnygrp.com if you have any thoughts...
Hi all, i am tring to install and configure reporting services in Windows 2003 SP2- 64 bit machine as part of installing SCE 2007, and i followed the procedure for confiurng all the options in reportingservices config tool,
all the options show green flag and still could not proceed further as the following error is coming
"The Selected Sql server reportin service instance is not configured , please configure to continue" which halts the further process,
I have installed SQL Server 2005 edition and installed Sql server 2005 SP2 also,
I was wondering if there was any white papers on the migration part from microsoft? Apparently the situation is like this Currently installed MOSS 2007 in a testing pc as application server. This application server will refer another testing database server which running SQL Server 2005.
Now, wanted to move this 2 temporary server into another 2 new servers. Correct me if I'm wrong, it cannot be done by using image like Norton Ghost due to difference hardware spec.
So, if I install another fresh copy of MOSS2007 & SQL server 2005 in that 2 new servers, how can I migrate the contents, documents, etc from the testing database server?
It would be great if someone can show me the links to kb article. Thanks
Hello, I want to install only reporting services on one server, I already did, but i want RS databases to reside on another server.
I already gave me administrator permission on the other machie, and in the reporting services configuration i entered the server and clicked FIND and it Found the instance, but when I click connect, I got this error.
See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text ************** System.Exception: *** INTERNAL *** The WMI Provider has returned an unspecified status at ReportServicesConfigUI.WMIProvider.ConfigurationItem.CreateConfigurationItem(String name, String description, String status, Int32 severity) at ReportServicesConfigUI.WMIProvider.RSInstance.get_DelayLoadConfiguration() at ReportServicesConfigUI.WMIProvider.RSInstance.get_Item(ConfigurationItemNames itemName) at ReportServicesConfigUI.ConfigurationManager.ResetStepStatus() at ReportServicesConfigUI.ConfigurationManager.ChangeMachine() at ReportServicesConfigUI.ConfigurationManager.LaunchDialog() at ReportServicesConfigUI.ConfigurationManager.tsbConnect_Click(Object sender, EventArgs e) at System.Windows.Forms.ToolStripItem.RaiseEvent(Object key, EventArgs e) at System.Windows.Forms.ToolStripButton.OnClick(EventArgs e) at System.Windows.Forms.ToolStripItem.HandleClick(EventArgs e) at System.Windows.Forms.ToolStripItem.HandleMouseUp(MouseEventArgs e) at System.Windows.Forms.ToolStripItem.FireEventInteractive(EventArgs e, ToolStripItemEventType met) at System.Windows.Forms.ToolStripItem.FireEvent(EventArgs e, ToolStripItemEventType met) at System.Windows.Forms.ToolStrip.OnMouseUp(MouseEventArgs mea) at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks) at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.ScrollableControl.WndProc(Message& m) at System.Windows.Forms.ToolStrip.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** JIT Debugging ************** To enable just-in-time (JIT) debugging, the .config file for this application or computer (machine.config) must have the jitDebugging value set in the system.windows.forms section. The application must also be compiled with debugging enabled.
When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box.
Hi and thanks in advance for your help. I have a dilemma and I need some expert help with this. I am trying to make a copy of a remote Database and then replicated the DB and it's contents on my local machine so I can build a test site to run data with. I tried to remot into the server machine but I guess that feature is not allowed by the honest of the remote machine. Since I build on my local machine and would like to be able to test data on my local machine.... I would like to copy the remote DB to my local computer and then I can run my test app on my local server. The version of SQL on the remote machine is SQL Express 2005 and I have SQL 2005 on my machine. Please give me how to accomplish this please.
Hi all! I know I might sound stupid, but I have this problem. I have developed my database on my laptop which does not use Active directory. Lets say I access the database with: SPIDERMANDB1 on SQL server, where the name of my laptop is SPIDERMAN, and the database is DB1. Now, I create an SQL script from sql server and make the necessary changes, like changing the computer name to say, SUPERMAN where my deployment server's name is SUPERMAN. But when I run the SQL script on the SUPERMAN server, it gives me an error like: "User or role SUPERMANDB1 does not exist in this database". I have deployed databases in this way on servers without Acive directory, so I'm sure its not a mistake on my side. So how am I supposed to go around this active directory thingi! Please help me out! I'm counting on u guys!
I have a msaccess linked server that I use to execute sql 2000 stored procedures from a front end in adp (access data project) format without any problem, if it is used on the same machine where the sql server resides (with any user logged on). In any other machine on the local network where I also need to use it, I get an ole/db error message saying that the microsoft jet database engine can not open the file because it's allready opened exclusivly or because it do not has permissions. I created the linked server with both UNC and normal path with the same result.
When i try to debug the northwindoledb example with VS2005 i get the foolwing error message.
Is there a way to configure the solution to run witn WM5 emulator.
The application run with wm5 emulator when i set the plataform to Windows Mobile 2003, but i want to use the wm5 platform to debug my application with wm5 emulator.
------ Rebuild All started: Project: northwindoledb, Configuration: Debug Windows Mobile 5.0 Pocket PC SDK (ARMV4I) ------
Deleting intermediate and output files for project 'northwindoledb', configuration 'Debug|Windows Mobile 5.0 Pocket PC SDK (ARMV4I)'
Compiling...
Employees.cpp
northwindoledb.cpp
stdafx.cpp
Generating Code...
Compiling resources...
Linking...
coredll.lib(COREDLL.dll) : fatal error LNK1112: module machine type 'THUMB' conflicts with target machine type 'ARM'
Build log was saved at "file://d:Proyectos_VS2005Northwindoledb_WM2003_SQLEW_Windows Mobile 5.0 Pocket PC SDK (ARMV4I)DebugBuildLog.htm"
Hi All, Is it possbile to define connection string for web and database server which is running on different machine. Note( Not same LAN). E.g (My Web Server is in London and Database server in Sydney). Please can any one help me.?? Thanks in advance...
I've a SQL server 2014 running on one of our server. We're in the process of implementing security steps for our databases. I've encrypted a column in one of the table in the database on the server. The issue is when I restore the backup on my local SQL server and run a query to decrypt the column data it gives me null values. On the other end when I decrypt the column data on the main server it works fine. I found a thread on this forum which states to do the following when restoring the encrypted database on different server.
USE [master]; GO OPEN MASTER KEY DECRYPTION BY PASSWORD = 'StrongPassword'; ALTER MASTER KEY ADD ENCRYPTION BY SERVICE MASTER KEY; GO
select File_Name , CONVERT(nvarchar,DECRYPTBYKEY(File_Name)) from [test].[dbo].[Orders_Customer]
Can we have Reporting Services having its database on a server and distribution server (http://IISserver/Reports) on another server?We dont want our database server to have IIS and dont want SqlServer installed on our IIS server kind regards
I want to install only the Reporting Service (and Analyzing Service) on a machine without any database (I will create a dedicated SQL Machine later on). Now, after the installation process I can see a SQL Server in my Installed Programs View. To me this looks like a complete SQL Server installation,but this is not what I wanted (I only checked the two services during the Setup). Or are those just some supoorting components?
I am using SQL Server 2005 Management studio. I already created a database including the table with stored procedure. Now, I want to copy all my database data, including the table and stor proc into my laptop. How I can do that? How I can save my database data in management studio into external drive (pen drive or external drive) then tranfer into my personal laptop? Please help... Thanks
I have a backup file in SQL Server 6.5 on machine A and wish to restore the database on another server on machine B but I cannot figure out how to do this...There is not enough room on one machine for both the database and the backup file and I cannot seem to be able to create a backup device on a different machine. ... ... HELP.
I'm a beginner user. I'd like to move the whole database from a work station to a server, how should I do it in a safe way? First of all, I have a very basic question: How could I save a database in SQL Server? Thanks in advance.
Hi, I have two servers, namely ServerA and ServerB. These two servers are on the same subnet. ServerB has a database called DatabaseB. I'm logged in in ServerA and trying to pull data from DatabaseB.
This is the query I do when I'm logged in in ServerB (note im using Microsoft SQL Server Management Studio):
USE DatabaseB
SELECT distinct b.Subject FROM dbo.F_Class_Exam a LEFT OUTER JOIN dbo.D_Course_Catalog b ON a.Course_ID = b.Course_ID WHERE a.Term = '2071' AND a.Class_Exam_Type = 'FIN' AND b.Term = '2071' ORDER BY b.Subject
How would I do this same query on ServerA? Ideas? Thoughts?