Corrupted Log File
Jul 20, 2005Need to recover from a corrupted log file. The database in Enterprise
Manager shows the database as corrupt.
Using sp_Attach_db produces a corrupt log message.
Any way to recover the data?
Thanks
Need to recover from a corrupted log file. The database in Enterprise
Manager shows the database as corrupt.
Using sp_Attach_db produces a corrupt log message.
Any way to recover the data?
Thanks
We have one database of 5 GB of which when we take the backup and restore in another location, it says "Device Activation Error. The Physical file name e:databaseike_log.ldf may be incorrect".
The database has more than one log file.
Now when we use another procedure to create new database and stop the sql, then replace the old mdf file and REBUILDLOG. (Ie dbcc rebuildlog(nike,1,0)). It says incorrect DBCC Statment.
Pl. suggest us what to do?
hello,
i am using sql server ce 2.0 on windows ce 4.2.sometimes my sdf file gets corrupted but i cant understand why?i know how this file repair.but for me it is not a solution.please somebody help me!
ok..my friend sent me a video via file transfer, but when i tried to view it, and open it up with windows movie maker (that is the program she made the video on) it said the file was corrupted. is there any way i can fix the corrupted file? or any other program i can view it on? windows media player also declares it corrupted.
View 1 Replies View RelatedHi This is chetan jain sql server DBA.
I came accross a probplem while synchronising production with DR in logshipping.
logshipping was stopped and the message was " Cannot copy the ......TRN . file is corrupted.
can anybody suggest that what should be done if TRN file is corrupted...because if i manully restore the logs at DR i will need every log file to sync Prod with Dr.log file that is corrupted cannot be skipped...neither it can be restored at Dr.
please suggest the solution..
Thanks in Advance...
Thanks in advance.
-- Chetan
Recently, one of our database's mdf and ldf was corrupted. We were able tobring back the database with the capability of importing and querying thedata. However, the data is not the full list. Some of the data are stillmissing because the tables we want still has sone 'chain mis linkage' errorwhen we did a DBCC checkdb/checktable. DBCC couldn't fix those errorseither. We're pretty sure that there are some data still burry under thecorruption. Then we thought of the life LDF file. This file should haverecorded every transaction up to the point of failure. So we trying torecover that file, but there are 2 problems. First is we don't have back upof that file and 2nd, that file is also corrupted. I couldn't backup thecorrupted ldf file at its current state. It's giving me some unrelated errormessage like disk space is out. All I know now is the only hope to recoverthose missing data are in this LDF file. We tried to use this software fromLimingent Log Explorer to recover it. So far no such luck with that. SoI'm asking anyone who has similar experience or problem. Please let me know.I need to know anyway to recover this LDF file, either by using sql server'snative tools or 3rd party tools. Any input is helpfull. thanks in advance.Wei
View 1 Replies View Relatedhi,
i developed an application which running on PDAs.i am using sqlserver ce database.my database file sometimes corrupted,why sqlce databases are corrupted and what can i do not corrupted.i can repair my database file when it corrupted but my customers not understand when database file was corrupted,so they think that program doesnot work.
hello i have this problem if anyone can help
EXEC sp_attach_single_file_db @dbname = 'world',
@physname = 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataworld.mdf'
Msg 1813, Level 16, State 2, Line 1
Could not open new database 'world'. CREATE DATABASE is aborted.
Msg 3456, Level 21, State 1, Line 1
Could not redo log record (9767813:109:10), for transaction ID (1:1182802845), on page (1:27846), database 'world' (database ID 5). Page: LSN = (9767810:70:66), type = 2. Log: OpCode = 3, context 19, PrevPageLSN: (9767812:47:11). Restore from a backup of the database, or repair the database.
Msg 3313, Level 21, State 2, Line 1
During redoing of a logged operation in database 'world', an error occurred at log record ID (9767813:109:10). Typically, the specific failure is previously logged as an error in the Windows Event Log service. Restore the database from a full backup, or repair the database.
thanks
I want to know is there any process alert me that my data or .ldf file get corrupted?
I've been going through data corruption from last 2 days in row that .ldf getting corrupted and I've to fix it.
Is there anyway I can setup any alert? or any better procedure ?
our sql server databases are on a window cluster server.how to correct this issue or why would this happen? FILESTREAM data container 'M:TessituraDB DataDocuments' is corrupted. Database cannot recover.
View 0 Replies View RelatedI run MSDE on a Windows XP Server and my database was marked as "suspect" by Enterprise Manager and its icon become gray. I detach that database and try to re-attach it but there is an error as the following:
Error 3624:
Location : page.cpp:2801
Expression: rowLength >= offset + deleteLenght
SPID : 56
Precess ID:1612
After that, I uninstall the MSDE and re-install new MSDE SP4 and try to re-attach the database file again and there is still an error. Is there anyway i can recover the data from that database?
Log shipping was configured 6 months back. A Transaction log file got corrupted today. How to resolve this?
View 20 Replies View RelatedA friend of mine called and said that his database was suspect and he detached it and was unable to attach it. The SQL Server Version is 2000 with the latest service packs installed. When I checked it the database (MDF) size was 1MB and the LDF size was 3.8 GB. I was not able to attach the two together and I was not able to attach the database using sp_attach_single_file_db. I did find an old backup of his database and attached that so he can work off of it but it is 1 yr old and he needs recent data. Since the MDF seemed to be blank we cant do much with that, but there seems to be data in the LDF. Is it possible to extract any data from the LDF file?
Sunny
I use this code to get Tiff files from db , but output file seems to be corrupted :
Dim pubsConn As SqlConnection = New SqlConnection("Server=(local);uid=sa2;pwd=sony;database=pubs;") Dim logoCMD As SqlCommand = New SqlCommand("SELECT pub_id, logo FROM pub_info", pubsConn)
Dim fs As FileStream ' Writes the BLOB to a file (*.bmp). Dim bw As BinaryWriter ' Streams the binary data to the FileStream object.
Dim bufferSize As Integer = 100 ' The size of the BLOB buffer. Dim outbyte(bufferSize - 1) As Byte ' The BLOB byte() buffer to be filled by GetBytes. Dim retval As Long ' The bytes returned from GetBytes. Dim startIndex As Long = 0 ' The starting position in the BLOB output.
Dim pub_id As String = "" ' The publisher id to use in the file name.
' Open the connection and read data into the DataReader. pubsConn.Open() Dim myReader As SqlDataReader = logoCMD.ExecuteReader(CommandBehavior.SequentialAccess)
Do While myReader.Read() ' Get the publisher id, which must occur before getting the logo. pub_id = myReader.GetString(0) ' Create a file to hold the output. fs = New FileStream("\Server1shared1logo" & "KK" & ".tiff", FileMode.OpenOrCreate, FileAccess.Write) bw = New BinaryWriter(fs)
' Reset the starting byte for a new BLOB. startIndex = 0
' Read bytes into outbyte() and retain the number of bytes returned. retval = myReader.GetBytes(1, startIndex, outbyte, 0, bufferSize)
' Continue reading and writing while there are bytes beyond the size of the buffer. Do While retval = bufferSize bw.Write(outbyte) bw.Flush()
' Reposition the start index to the end of the last buffer and fill the buffer. startIndex += bufferSize retval = myReader.GetBytes(1, startIndex, outbyte, 0, bufferSize) Loop
' Write the remaining buffer. bw.Write(outbyte, 0, retval - 1) bw.Flush() ' Close the output file. bw.Close() fs.Close() Loop
' Close the reader and the connection. myReader.Close() pubsConn.Close()
Me.Div1.InnerHtml = ("<embed height=650 width=100% toolbar='' src= '" & "\Server1shared1logoKK.tiff" & "' type='application/x-alternatiff'>")
I trying to update my Aggregation Design for a partition using BIDS Helper. The current aggregation design contains about 60 aggregations and the new aggregation I am trying to add is across 5 dimension attributes, the product of which is about 500,000 unique values. The fact table is about 13,000,000 rows.
When I deploy the aggregation and run ProcessIndex, I get the follow error:
File system error: The following file is corrupted: Physical file: ?E:Program FilesMicrosoft SQL ServerMSAS10_50.MSSQLSERVEROLAPDataTestDB.14.dbcube_2.607.cub
cubemeasuregroup_2.633.detDefaultPartition_2.579.prt852.agg.flex.data. Logical file.
If I remove the new aggregation, deploy, and run ProcessIndex again, it processes fine.
Is there some file size limitation I am running into? The agg.flex.data file is 7.8 GB before adding the new aggregation, so it isn't subject to the same 4 GB limit as .asstore.
Windows Server 2008 64 bit
SQL Server 2008 R2 (10.50.1746.0) 64 bit
We have database when trying to make read only throwing below error: with stack dump
Location: recovery.cpp:4517
Expression: m_recoveryUnit->IsIntendedUpdateable ()
SPID: 51
Process ID: 6448
Msg 926, Level 14, State 1, Line 1
Database 'XXXX' cannot be opened. It has been marked SUSPECT by recovery.
See the SQL Server errorlog for more information.
Msg 5069, Level 16, State 1, Line 1
ALTER DATABASE statement failed.
Msg 3624, Level 20, State 1, Line 1
A system assertion check has failed. Check the SQL Server error log for details. Typically, an assertion failure is caused by a software bug or data corruption. To check for database corruption, consider running DBCC CHECKDB. If you agreed to send dumps to Microsoft during setup, a mini dump will be sent to Microsoft. An update might be available from Microsoft in the latest Service Pack or in a QFE from Technical Support.
Msg 3313, Level 21, State 2, Line 1
During redoing of a logged operation in database 'XXXX', an error occurred at log record ID (0:0:0). Typically, the specific failure is previously logged as an error in the Windows Event Log service. Restore the database from a full backup, or repair the database.
Msg 3414, Level 21, State 1, Line 1
An error occurred during recovery, preventing the database 'XXXX' (database ID 7) from restarting. Diagnose the recovery errors and fix them, or restore from a known good backup. If errors are not corrected or expected, contact Technical Support.
Investigation DONE:
- DBcc checkdb shown Clean
- database is online and able to access
-Detached database and attached with rebuild log, still could not bring database read_only
SQL version : SQL server 2008 SP4.
yes,I have an error, like 'The database file may be corrupted. Run the repair utility to check the database file. [ Database name = SDMMC Storage Cardwinpos_2005WINPOS2005.sdf ]' .I develope a program for Pocket Pcs and this program's database sometimes corrupt.what can i do?please help me
View 4 Replies View RelatedHi Everyone,
when i am trying to attach a 'xxx.mdf' file it is showing message 'xxx.mdf' is not a primary database file.
Please suggest me what could be the reasons and what are the possible ways to recover my database.
I have lot of important data in the database.
Thanks and Regards,
Shashidhar
how can i attach my database without the ndf file, i still have the mdf and ldf. my ndf file contains only 2 tables which are not that very impt. unfortunately my ndf was corrupted and my backup files was deleted when the network admin formatted the harddisk where the backups were stored.. is it possible? kindly help..
View 5 Replies View RelatedHi,
I have a question on sqlserver 6.5 with sp5a.
I execute a query like the following
select * from eps_analysis_cm (INDEX = index2)
where ....
the query gets 32 rows.
If I use another index
select * from eps_analysis_cm (INDEX = index1)
where ....
the query gets 0 rows.
Are my indexes corrupted ?
Note: running DBCC CHECKDB I get no error messages
Thanks in advance
SQL Server 6.5.
Hi!
When I try to create PK, Clustered index on the column in the table I have got error message: 1105 Couldn't not allocate space for object table1......
But it is a big amount of free space in the database. And actually I can create any indexes, exsept clustered with no problem.
DBCC CHECKALLOCK for this table shows: extent not ih the segment.
Does it mean the table structure is corupted? What Can I do to resolve the problem?
Thank you,
Elena.
Hi, Folks !
What happens with all jobs after rebuilding master db if it got corrupted. Will they be working correctly ? If no, then why ?
Thanx in advance,
serg
Hi all,
Had a disk problem here, and all apps connected to our database hung. Nothing was responding, rebooted, and mssqlserver hangs on startup.
If i move the mdf and ldf files of the database in question to another folder, mssqlserver starts up ok, with the db marked as suspect.
It would seem the the mdf and ldf are corrupted.
I am restoring a backup from yesterday, but this will take hours.
Any suggestions trying to recover it as it sits?
Thanks in advance for any ideas.
Hi..!
Is it possible to recover data from corrupted log backup ?
Suppose we have 10 log files and 8th is corrupted then how can we recover database.
I am not facing such problem right now, but it's a question raised in my mind.
I would like to have your help, suggestions & comments. :rolleyes:
Thanks...
Hi Everyone,
When I am trying to restore the backup it is giving an error message "An internal consistency error occurred. Contact Technical Support for assistance".
Please suggest me on this issue.
Is there any way to restore the backup or recover the backup.
Thanks,
Shashidhar
I have a SQL 2000 database whose MDF is approx. 105 GB. Everything has been working fine for months until this past weekend when the database server dropped offline. I restarted the services and SQL server looks to have started up okay. However, trying to access it via Enterprise Manager causes EM to hang. Checking the Windows event log, there are a whole series of messages stating ...
3455 : Analysis of database 'ptportal' (7) is XX% complete (approximately 61 more seconds)
This 'analysis' ran for over 12 hours ... I have never seen this run before, much less this long. Now, there are a new series of messages stating ...
3450 : Recovery of database 'ptportal' (7) is XX% complete (approximately 56526 more seconds) (Phase 2 of 3).
This 'recovery' has been running for 9 hours now. Does anybody have any idea what has happened here or what is going on? My guess is that this database has been corrupted and SQL Server is trying to do a repair? Anybody know how long this usually takes and what the success liklihood would be?
Thanks
-- Jeff Chastain
this may well be the wrong place for my post, if so please move it.
I have a variety of boxes with SQL tools installed on them. For some reason last week several of them seem to have gone a bit squif.
Server 1. Enterprise manager fails to run, giving message MMC could not create the snap-in. QA runs fine.
Server 2. Load EM click on a database and try Tools --> QA it comes back with File Not Found. Add isqlw as an external tool and you can run that ok, but still File Not found on the QA tab.
I know its not data corruption, but I hope someone can give me a clue on this!
Cheers!
Hi ALL,
My sql server is not starting becasue master db got corrupted.
I have tried to rebuild the master db with rebuild utility.Now the process of rebuilding taken 6 hours but still the process of rebuild master is going on.
Can any body faced this problem why it is not rebuilding the simple master database.
Thanks you.
BPG
EDIT by tkizer: moved to Data Corruption Issues forum
Hi,
I have a database corrupted showing on the Object Explorer the name of the database and showing near (6.5). Deleted not accepted any other function not allow. Is there any way to take off from the Object Explorer?
Best regards
Hello,I have a SS2K (SP3) that is appending very wierd looking error messagesto the SQL Server Log (Current). The messages are not formatted asother log entries. The messages suggest some kinda dump information.The messages have the following characteristics:Date Information is invalidSource information is invalidMessage information is strangeThe following is a message that appear in my current SQL Server LogDATE:78008454SOURCE: Module(MSVCRT+Message (_endthread+000000C1)There are many messages like this in the log.Is this serious?Thanks - Covi
View 1 Replies View RelatedHey Hey everyone. It's me again asking for help.I have an NT sp6 box with SQL 7. It seems the password for SA hasbeen corrupted, so it won't allow me to log in to it.As an NT admin, is there anyway to reset the SA password?Or, can I create another SA account in SQL 7?Can't find anything in Microsoft because..... SQL7 is not longersupported.Thanks in advance for any help.Jinev
View 3 Replies View RelatedHi:
I try to run VB2005 Sample101, "Using Datagridvies" with SQL Express,
Here is what I got !"
"One or more files do not match the primary file of the database. If you are attempting to attach a database, retry the operation with the correct files. if this
is an existing database, the file may be corrupted and should be restored from a
back up.
Cannot open use default database. Login failed.
Login failed for use 'XXXXXXXXXXXAdministrator"
Lof File 'C:Program FilesMicrosoft SQL ServerMSSQL.1DataAdventureWorks_Data_Log.idl' does not match the primary file. It may be from a different database or the log
may have been rebuilt previously."
Then I re attached the Database again. Still the Same problem.
I try other sample that used Northwin and Pubs (SQL2000 ) and attached to
SQLExpress, Well I suffered the SAME PROBLEM.
WHY, Please Help
Thanks
Simon
We need to know, how to reorganize or reindex on sql-ce?
View 1 Replies View Related