Could A Datatype Of A Column Be Like Integer Array?
Aug 7, 2004Hi everyone....
I need a column in my table that its DataType should be as integer arrays how can I implemant it in my sqlserver table.
Any help appreciated.
ADVERTISEMENT
How Would I Send A String Array As A Integer Array?
Jun 25, 2007I have a stored procedure that has a paramter that accepts a string of values. At the user interface, I use a StringBuilder to concatenate the values (2,4,34,35,etc.) I would send these value to the stored procedure. The problem is that the stored procedure doesn't allow it to be query with the parameter because the Fieldname, "Officer_UID" is an integer data type, which can't be query against parameter string type.
What would I need to do to convert it to an Integer array?
@OfficerIDs as varchar(200)
Select Officer_UID From Officers Where Officer_UID in (@OfficerIDs)
Thanks
Can I Add Integer Array To SQLCommand As Parameter?
Jun 3, 2008I'm trying to build an SQL string that should look like this when executed:
UPDATE [Table] SET Active = 'False' WHERE ID IN (3, 4, 5, 6, 7, etc.)
I'm using the convention (in code behind):SqlCommand cmd = new SqlCommand("UPDATE [Table] SET Active = 'False' WHERE ID IN (@TheIDs)", connection);cmd.Parameters.Add("TheIDs", SqlDbType.Text).Value = theIDsAsAnArrayList;
But logically enough I cannot insert them as a text string as they have to be integers seperated by commas.
Question: How can I convert an Array of integers into ... well, a string without the quotes, if you know what I mean?
As it cannot end up like this: UPDATE [Table] SET Active = 'False' WHERE ID IN ("3, 4, 5, 6, 7, etc.")
Note the quotes around the integers.
Any hints on doing this with security in mind are welcome. I know I can concatenate the whole lot as strings, but this is unsecure, so I'm not going for that approach.
Working With An Integer Array In A Stored Procedure
May 4, 2006hi there,
i need a procedure that works with C# e.g.:
using (SqlCommand cmd = GetCommand("Procedure_Name"))
{
//i=an array of integer values
cmd.Parameters.Add("@array", SqlDbType.????!?!???).Value = i;
cmd.ExecuteScalar();
}
i need to write a stored procedure that takes as input an array of integers (amongst other values)
this procedure must loop through every integer in the array and INSERT a new record into a table.
i have never used T-SQL before.
Many thanks
Transact SQL :: INSERT Array Of Integer Into Table - Wrong Return Value Of Statement In ODBC
Sep 30, 2015I would like to INSERT an array of integer into a table in MSSQL Server, then count the number of rows in the table with c++ using ODBC. Here you find my code to do this task:
#include <windows.h>
#include <stdlib.h>
#include <stdio.h>
#include<tchar.h>
#include <sql.h>
#include <sqlext.h>
#include<sqltypes.h>
[Code] ....
In my code, I would like to Insert the array and then count the number of rows:
SQLTCHAR Statement[] = _T("INSERT INTO information1(Wert1,Wert2) VALUES(?,?) select count(*) as a from information1 ") ;
Problem : My expectation is, that first 9 rows are inserted into table then comes 9 as result to user (if the table is empty) but this code returns me 1 if first the table is empty. If the table is not empty, it returns 1+number of existing rows in the table. If I take a look inside the table, the 9 rows are successfully inserted in it. Only the number of rows in the table is wrong.
Hint : If I monitor the database using SQL Profiler. It looks like this:
Why this statement doesn't work correctly?
Integer Datatype
Dec 4, 2000Hi all,
I have a situation where I will have to insert a value(whole number) into the table where the the value is more than what the Integer can hold , I was wondering is there any other datatype which i can use other than integer
Thanks in advance.
Sanjeev Kumar
Integer Datatype Question
Jun 4, 2004I have a column setup using the Int datatype and a length of 4. First: does this mean that the allowable range is from -9999 to 9999? Second: I can't seem to change the 4 to anything else, how can I modify the length :confused:
View 2 Replies View RelatedInteger Datatype And Null Value Error
May 2, 2006I'm getting a datatype error: "Application uses a value of the wrong type for the current operation" when executing the following stored procedure:
CREATE PROCEDURE dbo.Insert_Temp_ContactInfo
@sessionid varchar(50),
@FirstName varchar(50) = NULL,
@LastName varchar(50) = NULL,
@SchoolName varchar(50) = NULL,
@address varchar(50) = NULL,
@City varchar(50) = NULL,
@State int = NULL,
@Zip varchar(5) = NULL,
@Phone varchar(10) = NULL,
@Email varchar(50) = NULL,
@CurrentCustomer varchar(3) = NULL,
@ImplementationType int = NULL,
@ProductType int = NULL,
@Comment varchar(500) = NULL
AS
--check if a current record exists
SET NOCOUNT ON
begin
UPDATE dbo.Temp_ContactInfo
SET
FirstName = @FirstName,
LastName = @LastName,
SchoolName = @SchoolName,
Address = @address,
City = @City,
State = @State,
Zip = @Zip,
Phone = @Phone,
Email = @Email,
CurrentCustomer = @CurrentCustomer,
ImplementationType = @ImplementationType,
ProductType = @ProductType,
Comment = @Comment
WHERE
sessionid = @sessionid
If @@Rowcount = 0
INSERT INTO dbo.Temp_ContactInfo
(sessionid,
FirstName,
LastName,
SchoolName,
address,
City,
State,
Zip,
Phone,
Email,
CurrentCustomer,
ImplementationType,
ProductType,
Comment)
VALUES
(@sessionid,
@FirstName,
@LastName,
@SchoolName,
@address,
@City,
@State,
@Zip,
@Phone,
@Email,
@CurrentCustomer,
@ImplementationType,
@ProductType,
@Comment)
end
GO
This is code I'm using to call the procedure:
set InsertTempInfo = Server.CreateObject("ADODB.Command")
With InsertTempInfo
.ActiveConnection = MM_DBConn_STRING
.CommandText = "dbo.Insert_Temp_ContactInfo"
.CommandType = 4
.CommandTimeout = 0
.Prepared = true
.Parameters.Append .CreateParameter("@sessionid", 200, 1,50, usrid)
.Parameters.Append .CreateParameter("@FirstName", 200, 1,50,fname)
.Parameters.Append .CreateParameter("@LastName", 200, 1,50,lname)
.Parameters.Append .CreateParameter("@SchoolName", 200, 1,50,schoolname)
.Parameters.Append .CreateParameter("@address", 200, 1,50,address)
.Parameters.Append .CreateParameter("@City", 200, 1,50,city)
.Parameters.Append .CreateParameter("@State", 3, 1,4,state)
.Parameters.Append .CreateParameter("@Zip", 200, 1,5,zip)
.Parameters.Append .CreateParameter("@Phone", 200, 1,10,phone)
.Parameters.Append .CreateParameter("@Email", 200, 1,50,email)
.Parameters.Append .CreateParameter("@CurrentCustomer", 200, 1,3,currentcustomer)
.Parameters.Append .CreateParameter("@ImplementationType", 3, 1,4,implementationtype)
.Parameters.Append .CreateParameter("@ProductType", 3, 1,4,producttype)
.Parameters.Append .CreateParameter("@Comment", 200, 1,500,comment)
.Execute()
End With
Set InsertTempInfo = Nothing
the error is thrown on the following line:
.Parameters.Append .CreateParameter("@State", 3, 1,4,state)
I'm using a table to hold data that I can pass back to the original form page and re-populate the fields that were not validated correctly. The stored procedure either inserts or updates the record in the temp table I've created.
So, currently, as I'm testing, I'm just passing empty values to all the parameters and the @state parameter is failing and throwing the error.
I've double checked that the table has the state column set to integer datatype
The column is set as follows:
Name datatype length Allow Nulls
----------------------------------------------
State int 4 checked
I have tried setting the default value for every column to Null in the table and then also not using a default value. Either way, I still recieve the same error?
Not sure what else to look at?
It seems the problem might be that instead of a null value being passed to the parameter that it is actually empty. Can passing an empty value to a column of datatype integer cause this problem? If so, is there a way to correct it?
Thanks for any help.
Analysis :: Calculated Column That Makes Integer In YYYYMMDD Format Form Date Column
Oct 12, 2015I am trying to create a whole number DAX calculated column that is derived from a date column. Basically it gets the date from the source data column and outputs it as an integer in the YYYYMMDD format.So 01/OCT/2015 would become --> 20151001...I've been fidgeting with DAX but my problem is that I keep missing the leading zeroes for months and days. So 01/March/2015 becomes 201531 which is not what I want (I need 20150301 in this case).
View 2 Replies View RelatedInteger Column With Min / Max Value
May 6, 2015Can I put a constraint on an integer column that will only allow a certain range of numbers to be entered, or do I have to put that into the application layer only?
I'd like the range to be 0 to 30 as the only allowable values. The only thing that I could think of was to create another table and populate with 0,1,2...,30 and put a foreign key on the new column that wouldn't allow anything not in that list but I was wondering if there was a better way.
How To Create Array Column And How To Retrive In Sqlserver
May 9, 2005hi
i am using database sqlserver,i am searching for varray concept like in oracle to store multiple values in a single column(as array column) like that shell i do in sql server
1.how to create array column in a table using sqlserver
if possible how can i use select query for that
AVG Function On An Integer Column- Truncation
Oct 25, 2006When I use the AVG Function on an integer column, the result is truncated
Example:
Select AVG(field1) from table1
Field1 is an int field and has 4 rows with the values 114,115,115 and 115. This will return 114.
I can get the correct result by using the following SELECT:
SELECT CAST(AVG(CAST (field1 as decimal(18,1)))+ .5 as int) from table1
Am I missing something here? Is there an simpler way to do this?
Any help will be appreciated.
Steve D.
Query: Getting AVG() Of An Integer Column As A Floating Point
Feb 12, 2004I have the following query:
SELECT AVG(respondent_question.answer)
Now, the 'answer' column is an integer. However, I want the query to return a floating point number with one decimal place (i.e., 5.4, 2.3)
Since the column is an integer, the query returns only an integer by rounding to the nearest integer. How can I do this? Thanks!
Adding An Identity-based Integer Column
Jul 3, 1999I need to add a column that has the datatype of integer with a seed and identity increment to a table that already exists and has data in it - and can't all NULLs. I have heard that this not possible if the table already exists.
I have downloaded the demo's of SQL Programmer and a couple of Embarcadero programs to see if that would help, but have had no succes to date.
Thanks for any help,
Alan
Display Output Where Integer Value Is Column Data
Dec 1, 2011I want to display the following output where integer value is column data.
{[Advertiser].[AdvertiserKey].&[4000],
[Advertiser].[AdvertiserKey].&[4001],
[Advertiser].[AdvertiserKey].&[4002],
[Advertiser].[AdvertiserKey].&[4003],
[Advertiser].[AdvertiserKey].&[3661],
[Advertiser].[AdvertiserKey].&[3662]
}
SQL 2012 :: Integer Column Shows 5.00000000000000000 As Value
Sep 4, 2015INSERT WITH SELECT HAS THIS:
,Convert(Int,TARG_SALES) AS TARG_SALES
Treats the column as if it were formatted decimal !!
Convert Column Of Data Alphanumeric To Integer
Nov 14, 2013I need to convert a column of data from alpha numeric to integer.
I am only querying the tables i.e. i don't have access to actually change the data tables themselves.
CAST or CONVERT throws up an error. Are there any other commands i can use at the query stage?
The data I need to convert is always actually a number. i.e. even though it is recognised as alpha numeric, the figure is a number.
I just need it to be converted to an integer so i can SUM it etc.
Duplicating Rows Based On A Integer Column
Dec 17, 2007I have a table that holds a number of offers made to a orginization for placements at a lecture. what im wanting to do is have each of the rows for a orginization repeated so that the names of people attending can be put into the database.
The first table would looks something like this:
id___|__orginization_| lecture | offers
1 | orga | lec1 | 5
2 | orgb | lec1 | 3
3 | orga | lec2 | 3
the result im looking to get is something like this where the name of the attendess would be inputed in an application.
id | orginization | lecture | nameofattende
1 | orga | lec1 | j. blog
2 | orga | lec1 | s. smith
3 | orga | lec1 | h. samual
4 | orga | lec1 | j. sams
5 | orga | lec1 | b.j. james
6 | orgb | lec1 | m. curry
7 | orgb | lec1 | k. murry
8 | orgb | lec1 | g. hansen
Can anyone help with this
cheers
colin
RS2005: Export To Excel Error: Destination Array Was Not Long Enough. Check DestIndex And Length, And The Array's Lower Bounds.
Jan 25, 2007All,
I am using Reporting Services 2005. One of my reports is getting the following error when I try to export to Excel. It will export to .CSV though.
"Destination array was not long enough. Check destIndex and length, and the array's lower bounds."
Any suggestions would be greatly appreciated. Please copy me at machelle.a.chandler@intel.com.
Machelle
Transact SQL :: How To Identify When There Is A Break In Continuity Of Integer On A Column
Jul 16, 2015I have two columns, one column has a document ID and a given document can have many pages. The second column has the pages. Now I want to find out when the page number is broken. For example, if doc ID 1 has 3 rows and each of the three has 1,2,3 and then the fourth row has document 1 but the value jumps from 3 to 7 and then goes to 8,9,10 and then jumps again and starts from 17, i want to have the ranges identified.
DocID Page Number
1 1
1 2
1 3
1 7
1 8
1 9
1 10
1 17
1 18
1 19
1 20
The result should look like :
DocID Page Number
1 1-3
1 7-10
1 17-20
DB Design :: Convert Integer Date (MMDDYY) And Integer Time (HHMMSS) To DateTime Format?
Jul 20, 2015Working on a new database where the Date and Time are stored in a Date Time Field.
Then working on an OLDER database file within the same SQL Database contains these 2 items as integers:
transDate = "71615" (July 16, 2015)
transTime = "12345" (01:23:45 AM)
How do we convert both of them into a single SQL DateTime field such as "2015-07-16 01:23:45.000" so that it can be used in a join restricting to a date time in a different SQL File that properly has the DateTime in it?
This works well for converting the transDate Part in the select statement:
dbo.IntegerToDate(at.transDate) as transDate
* That returns: "2015-07-16 00:00:00.000"
* The resulting data must work directly in a Microsoft SQL Server Management Studio Query using either using the "on" statement or part of the "where" clause. In other words, NOT as a stored procedure!
Also must be able to be used as a date difference calculation when comparing the 2 files Within say + or - 5 seconds.
Linq Question: Select Returns A DBNULL For An Integer Column
Feb 21, 2008I have quite a few tables which allow NULL values. I have to struggle a lot with DBnull Exceptions :|example: col1,col2,... are all columns of type Integer and possibly NULL. var query = from person in table select new { person.col1, test = (int?) person.col2, person.col3, person.col4, ...}; As soon as my result encounters a DBNull value.. the whole query fails. This is really bad.How would I return the valid values.. and set the keys where there is no value to a null type? (e.g. int -> 0)I tried using "(int?)" but I'm not *really* sure what it does :-) Anyway.. it has no effect :-)
View 1 Replies View RelatedThe Conversion Of The Nvarchar Value '3008000003' Overflowed An Int Column. Maximum Integer Value Exceeded.
Jul 7, 2007 HiAm Using ASP.NET With SQL SERVER 2005 Backend
AGENT CODE
3008000003
NAME
agent code dropdownlist values like 1005000006,2009000002,3008000003select dropdownlist value it display corresponding values related to that codewhen i select first 2 values its run properly,But when i select 3008000003 i will get following error messagein SQL SERVER 2005 Agent Code Date Type is "bigint"" The conversion of the nvarchar value '3008000003' overflowed an int
column. Maximum integer value exceeded. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.SqlClient.SqlException: The conversion of the nvarchar value
'3008000003' overflowed an int column. Maximum integer value
exceeded.Source Error:
An unhandled exception was generated during the execution of the
current web request. Information regarding the origin and location of the
exception can be identified using the exception stack trace below.
Stack Trace: Please Help me to solve this issueThanks With RegardsS.Senthil Nathan
T-SQL (SS2K8) :: Blank Space In Integer Data Type Column View
Apr 4, 2014I am dealing with what I believe is Oracle that is the source of a SQL View.
I am seeing a data type of Integer in the View, but I am not able to see what makes up that View. When I query the View, I can see that an Integer data type column is storing a blank space. I use ISNUMERIC(ColumnName) = 0 and there are a lot of rows that show as a zero length blank space, or text, or something. I just know that it is not an Integer.
I have attempted to CAST and Convert this value, but it will not. I have changed the data type on the table that is being inserted in too, and it still fails with a Conversion error. I have tried REPLACE(), but still the same conversion error.
Column Datatype
Jan 9, 2005Hi folks, need ur help.
I want to convert strings from a textfile and convert em to appropriate datatype for the destination columns, eg if i have a source value in string 11111 and the destination column is MONEY. I want to use CONVERT(functionretruningdatatype,'11111') in my insert statement.
Any guidance!
Howdy!
How To Get DataType Of Column In Table ?
Jul 3, 2004I want get DataType of Column in Table
ex: nvarchar, varchar, etc...
Help me !!
Mismatch Of Column Datatype Between EM And QA
Dec 12, 2005I've changed the width of a column from 128 to 64. How to EM shows 64, while sysobjects and sp_help show 128 ?? Even after disconnecting and re-connecting (just to be extra sure).
View 2 Replies View RelatedChanging A Column Datatype
Dec 2, 2006Hello I am having a table
table1
col1 (bit)
and i want to changethe col1 type for smallint
col1 (smallint)
true will be = 1
and false = 0
how can i do it ??
thank you
Sum Float Datatype Column
Feb 12, 2014I'm using this query to sum the values. The cost column is a float datatype and what could I differently do here to sum the cost. I'm unable to sum the cost.
Also is there any way I change the datatype to int for Cost column without losing the data.
select ID, MAX(Date) Date, SUM(Cost) Cost, MAX(Funding) Funding from Application
group by ID
Derived Column In XML Datatype
May 9, 2008Hi,
I have a data flow task where I have mutiple columns (of different data types) , I want to create a single column using all these columns in XML format and load it into a table with a column of datatype XML. Can I accomplish this using Derived column tranformation?
Thanks
How Can I Find A Column's DataType And Size.
Jan 21, 2007hi ,How can I find sql Datatype (like NVARCHAR , DESIMAL & .. ) and size of columns and also is it Identity or not in a Table of SQl server?
View 4 Replies View RelatedChange Column Datatype $2,000 To 2000
Jul 30, 2007Hello,How do I change the datatype of a column in a CSV file. Preferably in the select statement (apparently Cast, Convert, & Replace functions don't work when selecting from a CSV). I have a page where users upload their CSV files to and then I use SQLBulkCopy to insert all the records into my sql table. The problem is with columns of money data. EX: "$2,000" >> 2000The CSV file interprets the "$2,000" as a string of text. How do I convert it to a decimal so I can insert it into my sql database?
View 4 Replies View RelatedRetreving The Column With Datatype-smalldatetime
Mar 12, 2008Hi all
A table consists of a column with name "Createddate" with datatype smalldatetime.
defaultly iam binding getdate() to Createddateso it is storing in tthe below format --
Mar 12 2008 11:38AM
while retreving iam mentioning...
select * from tbl where convert(varchar,createddate,101) = '03/12/2008'
it is showing no records ..even though records r there with --march 12 2008.
plz do needful in this senario.
thanks & regards
kanth