I am getting a "Could not allocate space for object 'temp_trc' in database
'Test' because the 'PRIMARY' filegroup is full"
The database test has unrestricted growth (All the defaults). It resides on
drive c which has 4Gigs free. I added new data and log files on drive d
which is about 30G free. I know that my insert doesn't take even 1G disk
space.
Why is the database complaining about a full filegroup when I just expanded
it?
J.
Hi all,
I need to load a table with 820,000 records from a Sybase db via DTS. It always fail with the error:
"Error at destination for row number 820000. Could not allocate space for object in tablespace tempdb
. The default filegroup is full.".
There is only the primary filegroup defined in the db. I've increased the size from 1.5GB to 2GB,
and specify that it shd grow automatically by 10% and there's no limit to the size.
There is still some 28GB in the server, so it should be fine.
It still fail so I added another file to the primary filegroup with size 100MB. Again, it failed with the same error msg.
Where or how else can I increase the tempdb size?
Any help is appreciated.
Thanx,
Jes
I have an error on the phpbb message board I am using. I have a MS SQL database and cannot figure out what I get this error. How could I fix this?
The full error is:
Could not allocate space for object 'phpbb_topics' in database 'adultsiblinggrief' because the 'PRIMARY' filegroup is full.
Hi,
I've got a table with 65'000 records and when I do a SELECT * FROM tablename ORDER BY Name I receive this error message:
Msg 1105, Level 17, State 1
Can't allocate space for object '-513' in database 'tempdb' because the 'system' segment is full.
If you ran out of space in Syslogs, dump the transaction log.
Otherwise, use ALTER DATABASE or sp_extendsegment to increase the size of the segment.
Msg 1510, Level 17, State 2
Sort failed: Out of space or locks in database 'tempdb'
So I've dumped the transaction with no_log and also I've extended the segement from the master database (because tempdb is in it bydefault):
sp_extendsegment system, master
But I've still got the error message. Is there anybody who can advice me?
Thank you
Could anyone please help me in fixing this error asap...
Server: Msg 1105, Level 17, State 2, Line 1
Could not allocate space for object '(SYSTEM table id: -334560816)' in database 'TEMPDB' because the 'DEFAULT' filegroup is full.
I have received below alert:
Could not allocate space for objects in database 'abc'
And I have added 1 GB(1024 MB) of free space to primary file system of 'abc'. However now the primary file system of 'abc' database is 120 GB and the file properties are : Automatically grow file is checked, By percent 1 and restrict file growth: 121024 MB
Still the database is showing as space avialable is 0.00, the total size is : 132186 MB
As of now I have't got any other alert, Please let me know if I get in the near future how to proceed??
One DTS package is running contunuously on this DB
I have received below alert:
Could not allocate space for objects in database 'abc'
And I have added 1 GB(1024 MB) of free space to primary file system of 'abc'. However now the primary file system of 'abc' database is 120 GB and the file properties are : Automatically grow file is checked, By percent 1 and restrict file growth: 121024 MB
Still the database is showing as space avialable is 0.00, the total size is : 132186 MB
As of now I have't got any other alert, Please let me know if I get in the near future how to proceed??
One DTS package is running contunuously on this DB
i created a query and when i run it like this i get data but when i add a value in the 2ed case for '2%' i get error.
Select a.email, case when a.reportnumber like '1%' then (select b.Reportnumber from ijasSummaryNo b where a.Reportnumber = b.Reportnumber) end as Reportnumber, case when a.Reportnumber like '1%' then (select b.stonebreakdown from ijasSummaryNo b where a.Reportnumber = b.Reportnumber) end as Measurement, case when a.Reportnumber like '1%' then (select b.reportcarddate from ijasSummaryNo b where a.Reportnumber = b.Reportnumber) end as ijasDate,
case when a.reportnumber like '2%' then (select c.Reportnumber from appraisalsummaryblue c where a.reportnumber = c.reportnumber) end as imacsRepNo
from t_RegisterInfoTemp a
Query works fine like this but when i add this (the one marked bold i get error)
case when a.reportnumber like '2%' then (select c.Reportnumber from appraisalsummaryblue c where a.reportnumber = c.reportnumber) end as imacsRepNo,case when a.reportnumber like '2%' then (select c.Measurement from appraisalsummaryblue c where a.reportnumber = c.reportnumber) end as Measurement2
This is the error.
Server: Msg 4414, Level 16, State 1, Line 1Could not allocate ancillary table for view or function resolution. The maximum number of tables in a query (260) was exceeded.
I made some copy of table and I have this error but on my hard disk i have 4 gig of empty space.
Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[Microsoft][ODBC SQL Server Driver][SQL Server]Could not allocate space for object 'Backup_Date_11_24_00_Time_9_08_34_AM' in database 'LogActiviteIntramedia' because the 'PRIMARY' filegroup is full.
/Intranet_API/Forms/videTableLog.asp, line 16
My question is how can I increase the space of primary filegroup?
Thanks and have a good friday
Dear All,
i'm getting the error while installing sql server 2005, the error states that there is not enough space. actually it has 12.9 Gb space. is it not enough to install sql server 2005 stnd edition?
Arnav
Even you learn 1%, Learn it with 100% confidence.
Hi,
Why we allocate .mdf and .ldf on seperate drives?
Please tell me a proper logical reason behind it.
I’m hoping someone can help me create a ‘lottery’ for records in a table.
I have a table called tblPoints with a number of fields including Application_ID, Total_Points and Place_No. The following is a sample of the data
Application_ID Total_PointsPlace_No
87 105
68 95
49 75
96 75
155 75
156 70
144 70
146 70
At the moment there is no data in the Place_No field.
I want to assign a Place_No to all records based on the number of Points (Total_Points). The highest Points value should have a place Number of 1 and so on.
Application_IDTotal_PointsPlace_No
871051
68952
4975
9675
15575
15670
14470
14670
However, where a number of applications have the same points I want to randomly allocate a place number for them. Application_ID 49, 96 and 155 all have 75 points so each of the 3 applications should be randomly allocated one of the following place numbers, 3, 4 and 5. I can not allocate them based on their order in the table as it has to be seen as a ‘lottery’ and each time it is run they would expect to get a different result.
The same thing then has to happen with the last 3 records in this sample allocating place numbers 6, 7 and 8
I was hoping to create a stored procedure to do this, but I’ve no idea where to begin. I would appreciate any help you could give. Thank you.
C
Hi,
Sorry for placing it in SQL Server Forum.But I couldn't find a appropiate forum for my question.Can anybody help me?
My question is -
How to allocate expended memory in windows XP?
Thanks!!
Joydeep
Any help would be appreciated.
This message is received on the client. Client pc has Intel 2Ghz or better processor, 512MB Ram, sufficient hard drive space, connecting to MS SQLServer 2000 thru TCP/IP.
Database server is running Windows 2000 Advanced Server w/ SP3 and MS SQLServer 2000 Enterprise Edition w/ SP3, with 4 way 700Mhz PIII Xeon processors and 4GB Ram (I'm not certain about network connectivity, but it's at least 100MB Ethernet). The database is approximately 87GB, with an average of 250 to 300 connections.
The application is vendor supplied, written in Visual Basic 3.0. Therefore I am using 16 bit SQL drivers, the latest I am aware of, dated 6/15/1997.
This database was previously running on SQLServer 7, and this error did not occur. It started after the upgrade to SQLServer 2000. We discovered this error in testing the upgrade and found that by decreasing the "Network Packet Size" setting on SQLServer w/ sp_configure, we were able to make the message go away. However now that we are in a production environment, the message seems to be coming back randomly. We have the NPS set to 1024 (default is 4096). I'm worried about performance if it is dropped much farther.
Any ideas? Thanks again for any help!
"Could not allocate new page for database 'TEMPDB'. There are no more pages available in filegroup DEFAULT. Space can be created by dropping objects, adding additional files, or allowing file growth."
I get this error when running a query on another database. But why?
Both data and transaction files on TEMPDB are set to "automatically grow file" and "unrestricted file growth" and there is 70GB of free space on the disk drive. Shouldn't the files just grow? Why would this happen?
I get the following error when doing a variety of basic queries on other databases:
"Could not allocate new page for database 'TEMPDB'. There are no more pages available in filegroup DEFAULT. Space can be created by dropping objects, adding additional files, or allowing file growth."
This doesn't make any sense since they are set to auto grow and there is plenty of disk space to do so.
Both data and transaction files of tempdb are set to:
"Automatically grow file" is checked
"Maximum file size" is set to "Unrestricted file growth"
Growth rate of 10%
Both tempdb data file and transaction file are on D: but all drives have ample space:
c:25 GB free
D:69 GB free
E:175 GB free
sp_spaceused returns the following for tempdb:
namesizeunallocated space
tempdb4.00 MB1.45 MB
reserveddataindex_sizeunused
568 KB176 KB304 KB88 KB
sp_helpdb returned for tempdb:
tempdb
4.00 MBsa2Apr 23 2004Status=ONLINE, Updateability=READ_WRITE, UserAccess=MULTI_USER, Recovery=SIMPLE, Version=539, Collation=SQL_Latin1_General_CP1_CI_AS, SQLSortOrder=52, IsAutoCreateStatistics, IsAutoUpdateStatistics80
This is with SQL Server 2000 (Personal Edition)
Product Version: 8.00.760 (SP3)
Is this some strange limitation of Personal Edition? Is it worth upgrading to Standard Edition?
Hello, I have an issue with a process that blows up because of the following error.
Executed as user: batchloader. Updated 0 existing Company records [SQLSTATE 01000] (Message 0) Inserted 0 new Company records [SQLSTATE 01000] (Message 0) Inserted 0 new EntityIdXref records [SQLSTATE 01000] (Message 0) Updated 977 existing CompanyCustomerAttr records [SQLSTATE 01000] (Message 0) Inserted 0 new CompanyCustomerAttr records [SQLSTATE 01000] (Message 0) Could not allocate new page for database 'TEMPDB'. There are no more pages available in filegroup DEFAULT. Space can be created by dropping objects, adding additional files, or allowing file growth. [SQLSTATE 42000] (Error 1101). The step failed.
Ok I am going to be typeing some really bad practices(I just started here 3 weeks ago.)
There is 23.6 gig free on my log drive. The disk is not running out of space and there are no disk errors in event viewer. The process in question calles 2 procs. These 2 proces load files from the filesystem and bulk load them into #temp tables. Then select's from these tables are issued using criteria from a static table. There are around 700000 rows being inserted into the #temp tables and no indexes are being created so very large table scans going on. Also there are some cursors being called to row by row minipulate the records and in the cursor it calles fucntions using cursors. There are thousands of files being processes everyday by several different jobs. All of the processes are written the same way. We have the tempdb set to auto grow by 10 % and the initial size is 3.5 gig. There are 3 to 4000 tables in the database and 90 % of them are being created on the fly to be used by this process and yes once again there are no indexes created on the on the fly tables. We have only one Filegroup on the server default.
I believe that takeing some of the objects and moving them to there own filegroup will help this issue. Every month we take on up to 800000 new records to process on top of what we allready do. So we use cursors cursors cursors temp objects with no indexes and massive recordsets and doing sorts on massive records sets. I am working with development to show them how and where to index but this will take time. I need a quick solution. Any thoughts any questions? The box has 4 gig of ram.
Hello Everyone,
I wasn't able to find the answer to my question by searching the forum. I would very much appreciate if anyone would help me.
I need to install the SQL Server Workgroup trial. I wasn't able to find the workgroup trial so I was trying to install the enterprise instead. (If anyone knows how to get ahold of the workgroup trial that would be a help too)
I keep getting the following error when running the SQLEval.exe:
There is not enough space on drive C: to extract this package
I did an internet search on this error and it seems there is a bug that requires the amount of free space not be a multiple of 4. I currently have 13.2 GB free space and I have tried adding and removing files, to no avail. I have tried downloading the file in a few different versions in case the file was corrupted, and rebooting etc, but still I keep getting the same message. I only have one drive!!!
Can anyone help me with this?
Hi,Received the following error during index creation of the tables. Thedata & log files are set to 'unrestricted growth' and enough spaceavailable on the disk. Any reasons?___________Microsoft OLE DB Provider for SQL Server (80040e14): Could not allocatenew page for database 'Ultimareports'. There are no more pages availablein filegroup PRIMARY. Space can be created by dropping objects, addingadditional files, or allowing file growth___________ThanksJohn Jayaseelan*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View Relatedrunning Sql Server 2005 SP2 on Windows 2003 Server SP1 with 2GB RAM. After start-up, the sqlservr.exe does only take up around 100 MB of RAM, and it stays roughly there even if the DB is used heavily. This leads to very poor performance, even timeouts on simple querys.
In the task manager, I see that of the 2 GB of RAM, more than 1 GB is still available. I don't understand why SQL Server won't take it?
As a test, I configured the min and max amount of RAM SQL Server should used both to 1024 MB and restarted the service - but it is still the same picture. It won't take more than around 100 MB.
The server has just been restarted, but the problem remains.
BTW there is also an instance of SQL 2000 on the same machine. It shows the same behaviour - I even checked the "reserve phyiscal memory" checkbox there, but it stays on a very low number (50 MB) and doesn't adhere to the supposed size.
thanks and best regards,
- Urs
do all sql data types consume whole numbers of bytes? We have an app that might be best suited to bit manipulation at the nibble rather than byte level.
View 3 Replies View RelatedWe got an error "Failed Virtual Allocate Bytes: FAIL_VIRTUAL_RESERVE"
Microsoft SQL Server 2005 - 9.00.5000.00 (Intel X86)
Dec 10 2010 10:56:29
Copyright (c) 1988-2005 Microsoft Corporation
Developer Edition on Windows NT 5.2 (Build 3790: Service Pack 2)
We had 24CPU intell cores and 64 gb RAM on server.
Sql service starts with enabled AWE + LPM and "-g512" option.
Why we still use such relic configuration it is not my fault. i'm investigate log and find that memorystatus "Optimization Queue" section has really huge values.
Optimization Queue
Overall Memory = 1321132032Target Memory = 1158799360 Last Notification = GROW Timeout = 6 Early Termination Factor = 5Small Gateway Configured Units = 32 Available Units = 26 Acquires = 6 Waiters = 0 Threshold Factor = 250000 Threshold = 250000Medium Gateway Configured Units = 8 Available Units = 7 Acquires = 1 Waiters = 0 Threshold Factor = 12 Threshold = 16094435Big Gateway Configured Units = 1 Available Units = 1 Acquires = 0 Waiters = 0 Threshold Factor = 8 Threshold = 144849920
[code]...
What forced bPOOL to allocate pages in MTL? How to determine that queries? Same about SQL OS.As workaround i increase -g startup option to "-g2048", and "max server memory" was decreased to 54Gb.
Hi,
I am trying to do this:
UPDATE Users SET uniqueurl = replaceAllEmptySpacesInUniqueURL('uniqueurl')
What would be the syntax.
Any help appreciated.
Thanks
I am generating a Report from Sql Data Source in Sql Server 2005 and viewing the Report in Report viewer control of Visual Studio 2005.
The data in the Data Source contains string with multiple spaces (for example €œ Test String €œ) but when they get rendered in Report viewer control, multiple spaces gets converted to single space €? Test String €œ.
I tried following solutions
1) Replacing spaces with €œ €?
2) Inserting <pre> tag before the string and </pre> tag after the string (Also tried <Pre> instead of <pre>)
But in all the cases result is same. The Report Viewer control is showing €œ €? instead of space and €œ<Pre>€? tag instead of preserving spaces.
Please provide me a solution so that spaces can be preserved in Report Viewer.
Hello everybody
Had some problems yesterday with a full transaction log. Was able to solve it by following microsofts knowledge base article n° 272318.
However, today I'm trying to create a new DB using the enterprise manager and get this error:
d:databasesHERCULES_1_Data.MDF: Operating system error 112(Es steht nicht genug Speicherplatz auf dem Datenträger zur Verfügung.) encountered.
The free disk space is > 60GB. That's by far enough... I only need 1-2 GB.
Any ideas what's wrong here?
Thanks anyone in advance for some guideance.
Renaud
hi, I have a customer that I look after the server for, they have a scanning system that runs with sql server they have started getting the message below despite 30gb of free space any ideas on a fix?
Warning: mkdir() [function.mkdir]: No space left on device in C:InetpubwwwrootDMSadd_external_file.php on line 38
Warning: mkdir() [function.mkdir]: No space left on device in C:InetpubwwwrootDMSadd_external_file.php on line 45 Unable to upload file:C:/office files/Scanning/119129/Estate Agents/SP.pdf
Hello,
I am testing my SSIS pakage, but I got a space disk issue (the C disk is over 100 GB):
Error: Date Time
Code: 0xC004704A
Source: xxxxDTS.Pipeline
Description: The buffer manager cannot extend the file "C:DTSxxxF.tmp" to length xxxxxx. There was insufficient disk space.
End Error
Error: Date Time
Code: 0x80070070
Source: xxxxDTS.Pipeline
Description: There is not enough space on the disk.
etc....
How can I solve the problem?
Is there any way to use different path for .tmp file?
Thank,
any help will be very appreciated.
When running SQLEVAL.EXE, I'm getting an error message when the installation wizard finished 'reading contents of the package' reading:
There is not enough space on C: to extract this package.
Having checked the requirements http://www.microsoft.com/sql/editions/developer/sysreqs.mspx, the free disk space on my c: is 45.42Gb.
Any ideas?
I am using the below script to get space alerts  and now i am interested in sending alerts  if for any drive space available is Less than 10% or 15%.. how to convert beelow code to find in %Â
Declare @Drives Varchar(20)
DECLARE @Spaces Varchar(50)
DECLARE @availableSpace FLOAT
DECLARE @alertMessage Varchar(4000)
DECLARE @RecipientsList  VARCHAR(4000);
CREATE TABLE #tbldiskSpace
[Code] ....
Hello.
I have a db dal containing the following code:
SqlCommand cmd = new SqlCommand();
cmd.Connection = dbc;
cmd.CommandType = CommandType.StoredProcedure;
cmd.CommandText = "SOME STORED PROCEDURE";
.
.
.
declare some SqlParameters
.
.
.
dbc.Open();
cmd.ExecuteNonQuery();
dbc.Close();
This code, when concurrently running via several threads, yields the following exception:
"The connection was not closed. The connection's current state is open."
My questions are:
1. Why don't .Net allocate another connection from the pool (I try to only concurrently run 2 threads while there are 25 connections in the connection pool) ?
2. How can one explicitly allocate a connection?
3. How do you suggest to solve this problem without a mutex/monitor etc' on the 3 bold lines above and without BeginExequteNonQuery()?
Thank you !
Hi All,
The following is the report from the SQL Server Mobile Subscription wizzard, Any Ideas?
New Subscription Wizard
- Beginning Synchronization (Success)
- Synchronizing Data (100%) (Error)
Messages
A call to SQL Server Reconciler failed. Try to resynchronize.
HRESULT 0x80004005 (29006)
The Publisher failed to allocate a new set of identity ranges for the subscription. This can occur when a Publisher or a republishing Subscriber has run out of identity ranges to allocate to its own Subscribers or when an identity column data type does not support an additional identity range allocation. If a republishing Subscriber has run out of identity ranges, synchronize the republishing Subscriber to obtain more identity ranges before restarting the synchronization. If a Publisher runs out of identit
HRESULT 0x80045647 (0)
Invalid parameter @subid specified for sys.sp_MSmerge_log_idrange_alloc_on_distributor.
HRESULT 0x0000523F (0)
The operation could not be completed.
- Finalizing Synchronization (Stopped)
- Saving Subscription Properties (Stopped)
Initially i thought it might be that some of the articles had primary keys that were of type nvarchar rather then Int thus resulting in no identity range being able to be assigned to those articles.
Test 1: I tried removing all articles that had nvarchar primary keys and left only one table that had an identity Int primary key colum. I then ran the snapshot agent. I then run through the Subscription Wizzard again and the error was the same.
Test 2: Then reading the error message again i tried those tables that didnt use identity columns and the wizzard completed successfully. Any idea what would be wrong with my articles that have identity columns. The article properties for the identity columns use the Identity Range Management defaults.
Any help would be appreciated.
Hi.. I was doing a good maintenance on my DB and my trans log LDF keep growing until 30GB but my DB data file MDF is only 2GB. I found the two following method to reduce my log size.
Method 1: I used veritas to backup log file with truncate
Method 2: I used the shrink database option in Enterprises manager to shrink it (file chosen=log , use default option)
After doing that, I found my LDF log file is still about the same size=27GB but when I see clearly, from the shrink database windows, the log spaced used reduced to only 100MB, the allocation log space is still 27GB. Why? How to make the LDF smaller to be the around the same size as the space used 100MB?
This is driving me bananas. Can't find any info on this anywhere....SQL 2000 seems to replace double space with a single space when I seta varchar field to " " (2spaces), it only stores " " (1space). Whyon earth would microsoft do this? If I save 2 spaces - I WANT TO SEE2 SPACES!!!!Can anyone help? Is this a database setting? Is this due to usingvarchar?Any help appreciated.Colin Hale
View 2 Replies View Related