Could Not Establish Trust Relationship For The SSL/TLS Secure Channel

Feb 22, 2006

 

Hi,

I am working on sql server reporting services 2005 , i got this error while deploying a report

Error 1 The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. C:TempNotificationReportdb.rds 0 0 

NB: i checked IIS no ssl required on all sites.

Any Help ?

Thanks

Tarek Ghazali

SQL Server MVP

View 14 Replies


ADVERTISEMENT

Reporting Services :: Could Not Establish Trust Relationship For SSL / TLS Secure Channel

Feb 27, 2008

I have just installed SQL Server 2008 Feb CTP. When I try and open the Reporting Services webpage i.e. http://Reportserver/Reports/ I get the error:
 
The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.
 
In the Reporting Services config, i can't see how to turn this off, apart from removing the SSL entry (port 443 details etc), but this just creates another error.
 
I am more a developer, so don't really understand SSL, I am just trying to display some reports I have created in 2008.
 
I am running this on Windows XP.

View 12 Replies View Related

The Underlying Connection Was Closed: Could Not Establish Trust Relationship For The SSL/TLS Secure Channel

Nov 17, 2006

I'm using SQL Server 2005 (SP1) Reporting Services on Windows Server 2003 SP1. I access the report server from Internet using SSL, but the server is not exposed directly to the internet. It is behind a firewall, where the required ssl port is setup and is working fine.

In my Reporting Server, the /ReportServer folder works perfect and I can navigate and view all reports. It is the /Reports folder the one that does not work fine. I can enter the /Reports folder, and can list all the reports. But, when I select one of the reports, and it starts rendering, I get the error message:

"The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. The remote certificate is invalid according to the validation procedure."

How can I fix this?

Thanks,

Julio

View 17 Replies View Related

SQL Server Admin 2014 :: Error - Could Not Establish Trust Relationship For SSL / TLS Secure Channel

Jan 14, 2015

I am a bit stumped by error generated when attempting to connect to the report url.

The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.

The only thing I can think of is a certificate is issued to the server (all domain devices) via group policy by cert authority running on the domain.

If I check the bindings within Report Services Configuration Manager the certificate is referenced.

I have tried removing 443 but I am still unable to connect.

A neutron walks into a bar. "I'd like a beer" he says. The bartender promptly serves up a beer. "How much will that be?" asks the neutron. "For you?" replies the bartender, "no charge."

View 2 Replies View Related

The Underlying Connection Was Closed: Could Not Establish Secure Channel For SSL/TLS.

Nov 20, 2007



Help.

Today while trying to get the Windows NT security working i upgraded my reporting services IIS server to a domain controller and it screwed up all of my settings. First it changed password for ASPNET user and so I reinstalled .net framework.

Now i get the



The underlying connection was closed: Could not establish secure channel for SSL/TLS.


error message.

I do not want to use an SSL certificate for I do not have one right now. How can I configure my SQL Server 2000 Reporting services to not use SSL. I see they added something to SQL Reporting Services 2005 in the configuration tools but I cant find out how to modify the config files with SQL 2000 RS to eliminate the SSL.

Please help, my company is down waiting for me to get this back up.

Thanks a ton,

deep

View 3 Replies View Related

The Underlying Connection Was Closed: Could Not Establish Trust Relationship With Remote Server.

Sep 21, 2007


I am trying to setup SQL Server 2000 Reporting services with an SSL connection. The SQL Server (Windows Server 2003 SP2 Standard) and Reporting Server (Windows Server 2003 R2 SP2 Standard) are on separate machines. I have tried setting up Certificates from both and Stand-Alone and Enterprise CA. I have tried several combinations of the Issue To name (server | server.company | server.company.local) I have modified the rsWebApplication.config and rsReportServer.config to match the certificate€™s Issue to exactly. I have tried installs with both Domain Accounts and NT AUTHORITYSYSTEM logins. I have managed to get https://server/ReportServer to work but I have had no luck with the report manager https://server/reports. How do I fix this error?


Thankyou

View 1 Replies View Related

Merge Replication - How To Secure The Channel

Jul 30, 2007

Hi,

i need to do merge replication between a central db on a windows 2k3 server running on sql server 2k5 standard edition and a mobile db on a mobile device running on sql server 2k5 mobile edition on windows ce 5.0 as OS. The mobile device will connect to the net using a SIM card and GPRS connections.

Due to security requirements, I need to secure the channel which the data transfer is taking place for the merge replication.

How do I go about doing that?

Thank you.

View 5 Replies View Related

Establish Relationship Between 2 Tables

Aug 23, 2007

I am running SQL Server CE on Visual Studio 2005.
I have created 2 tables and wish to establish a relationship between the two tables.
However, I could not find a proper way to establish the connection.
Anyone can provide some help on this?
thank you.

View 2 Replies View Related

Help Needed To Establish Foreign Key Relationship

Sep 28, 2007



Hi i have two tables

X and Y

X is the Parent table and Y is the child

X has gpikey char(14) and Record type char(1) as Primary key

y has Name as primary key and column xgpi char(14) which should be the foreignkey to table X

what approach should i take to establish relationship between these two tables.

gpikey of recordtype 5 is equal to value in xgpi in table y

ex: data
Table X
gpikey recordtype

123 1
2345 2
272626 5

Table Y
Name XGPI
dhdhd 272626

x and y are having one to many relationships

View 2 Replies View Related

The SSE Provider Did Not Find The Database File Specified In The Connection String. At The Configured Trust Level (below High Trust Level), The SSE Provider Can Not Automatically Create The Database File.

Aug 31, 2007

The problem that I am having is that with Visual Web Developer I am creating a webpage and having it directly put online, so for example when I start a new ASP.NET page, I select the location to be HTTP, with the location http://MYWEBSERVER/Website   and for the language and Visual BasicI notice a couple of things, first that there is no longer a a link under the Main toolbar "Website" selection called the ASP.NET configuration.  So how can I configure what I want to have users be able to do?  It seems that this choice is only available if I am building the ASP.NET page on my "localhost".  So that is the first problem.  So I am able to get the pages to work, atleast the things such as the textboxes to show up etc, (Even things as advanced as the "Login" box).  How ever when I try to get someone to try to login  I am taken to a page that has an server error.  The error is:
"The SSE Provider did not find the database file specified in the connection string. At the configured trust level (below High trust level), the SSE provider can not automatically create the database file. "
The Stack Trace Errors are at the bottom.  I think this is happening because the automatically generated databases are not getting built online as they are on my computer.  On my computer I have MSSQL express.  So either the databases are not getting built for some reason, (and I think that is the case as I don't see any in the folder).  So I think that somehow I have to create a database on my server, and then somehow configure the ASP.NET file, perhaps in the Web.Config file to look for that new database.  Is this the correct methodology?   Is there some simpler way that I can just somehow upload things as they are and have them work correctly on my server?   The error says that either the Server did not find the database or that the trust level was insufficient.  I don't think that is it as I just looked again and I don't see any .MDF files.  So how would I go about getting this to work right? Is there a way to do this with MySQL also?  So that I don't have to use MSSQL?  My server only allows 1 DataBase for that.
Thanks and I hope my question makes sense.  It is basically how can I get it to be able to create and check users etc. online?
Brian
[ProviderException: The SSE Provider did not find the database file specified in the connection string. At the configured trust level (below High trust level), the SSE provider can not automatically create the database file.]   System.Web.DataAccess.SqlConnectionHelper.EnsureSqlExpressDBFile(String connectionString) +2555237   System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +87   System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +1121   System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +105   System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +42   System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +83   System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +160   System.Web.UI.WebControls.Login.AttemptLogin() +105   System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +99   System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35   System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +115   System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +163   System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7   System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11   System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
 

View 1 Replies View Related

WCF Transport Channel For Service Broker

Mar 7, 2006

I saw a posting or read a blog somewhere that mentioned custom WCF transport channels where created for interacting with ServiceBroker. Has anyone read or heard something similar? If so, where can I get them?

Thanks.

Phil

View 15 Replies View Related

How Can I Create A One-to-one Relationship In A SQL Server Management Studio Express Relationship Diagram?

Mar 25, 2006

How can I create a one-to-one relationship in a SQL Server Management Studio Express Relationship diagram?

For example:
I have 2 tables, tbl1 and tbl2.

tbl1 has the following columns:
id {uniqueidentifier} as PK
name {nvarchar(50)}

tbl2 has the following columns:
id {uniqueidentifier} as PK
name {nvarchar(50)}
tbl1_id {uniqueidentifier} as FK linked to tbl1.id


If I drag and drop the tbl1.id column to tbl2 I end up with a one-to-many relationship. How do I create a one-to-one relationship instead?

mradlmaier

View 3 Replies View Related

Power Pivot :: Use Relationship Not Overriding Conflicting Active Relationship?

Oct 14, 2015

I have four tables with relationships as shown. They have a circular relationship and so one of the relationships is forced to be inactive.

   Operation (Commodity, OperationKey)   ==========> 
Commodity (Commodity)
                      /                                                                        
/
                       |                                                                         
|
   Advice (OperationKey)       ====== (inactive)=======>
Operation Commmodity (Commodity, OperationKey)

I have the following measure:

Advice No. Commodity:=CALCULATE (
COUNTROWS ( 'Advice' ),
USERELATIONSHIP(Advice[OperationKey],'Operation Commodity'[OperationKey]),
operation
)

However, the userelationship function does not override the active relationship between Operation & Advice and so the measure is limited to Advices directly filtered by the Operation table.

If I delete the relationship between Operation and Advice, then the measure works as expected i.e. Operation indirectly filters Operation Commodity which filters Advice.

View 9 Replies View Related

Trust Connection

Apr 20, 2006

I make a user dimis for my local sql server express, when I try to login with this user with ems manager lite, this message occurs:
Login failed.The user is not asociated with a trust sql server connection.
With windows authentication I can login without problem.
What is wrong?
Dimis

View 3 Replies View Related

Partial Trust

Sep 30, 2007

Hi Guys,

I have started a project using Linq for sql and SSCE. Everything goes well until I realize that SSCE can only run in full trust. Linq for sql is planned to support partial trust scenario. Any plans for such a support in Sql Compact Edition?

Dany

View 1 Replies View Related

Trust Conecction

Oct 5, 2006

I have a project in visual basic express that It connect with a sql 2005 express database. When I execute the project in the pc that have installing the sql, there´s no problem with it, but when I use a virtual machine to execute, there´s a problem with the sql connection.

The follwing is my sql connection:

Data Source=USERSQLEXPRESS;Initial Catalog=WORKFLOW;Integrated Security=True;Persist Security Info=True;User ID=sa

and y try with this:

Data Source=USERSQLEXPRESS;Initial Catalog=WORKFLOW;User ID=sa; password=admin13;



This connection are usable for the local machine but when I execute the program in other virtual pc there´s the following error: The user 'sa' is not associeted with a trusted connection SQL Server

System.InvalidOperationException was unhandled
Message="An error occurred creating the form. See Exception.InnerException for details. The error is: Error de inicio de sesión del usuario 'sa'. El usuario no está asociado a una conexión de SQL Server de confianza."
Source="Correspondencia_UAC"
StackTrace:
at Correspondencia_UAC.My.MyProject.MyForms.Create__Instance__[T](T Instance) in 17d14f5c-a337-4978-8281-53493378c1071.vb:line 190
at Correspondencia_UAC.My.MyProject.MyForms.get_frmLogin()
at Correspondencia_UAC.My.MyApplication.OnCreateMainForm() in C:Correspondencia_UACCorrespondencia_UACMy ProjectApplication.Designer.vb:line 35
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun()
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel()
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(String[] commandLine)
at Correspondencia_UAC.My.MyApplication.Main(String[] Args) in 17d14f5c-a337-4978-8281-53493378c1071.vb:line 81
at System.AppDomain.nExecuteAssembly(Assembly assembly, String[] args)
at System.Runtime.Hosting.ManifestRunner.Run(Boolean checkAptModel)
at System.Runtime.Hosting.ManifestRunner.ExecuteAsAssembly()
at System.Runtime.Hosting.ApplicationActivator.CreateInstance(ActivationContext activationContext, String[] activationCustomData)
at System.Runtime.Hosting.ApplicationActivator.CreateInstance(ActivationContext activationContext)
at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssemblyDebugInZone()
at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()
Data Source=USERSQLEXPRESS;Initial Catalog=WORKFLOW;Integrated Security=True;Persist Security Info=True;User ID=sa



View 4 Replies View Related

How Can I Set Up A Trust Based On Machine Name?

Sep 1, 2004

I need to set up a trust between a client machine (OS = XP professional) and an SQL server (OS = Windows Server 2000 and SQL 2000) using the client's machine name as opposed to a user Id. One of the main uses of this would be for BCP's using the "-T" option. I cannot find any information on how to do this but it seems I saw it done several years ago. Can anyone give me guidance on this?

View 1 Replies View Related

How Can We Trust Outer Joins

Apr 26, 2006

In the future =* or *= will not be suportted but I found more then one examples that show outer join does not bring all the rows =* does.

Can any one tell me what is wrong? Market table has 19 markets Budget table has rows for BudgetYear=2006 but none for 2007

BTW the same is true in SQL2005 and 2000

----------------------------------------------------------------

SELECT Market_code, Description,
Revenue = SUM( CASE WHEN BudgetType = 'B' THEN BudgetAmount ELSE 0 END ),
CM = SUM( CASE WHEN BudgetType = 'C' THEN BudgetAmount ELSE 0 END ),
Tooling = SUM( CASE WHEN BudgetType = 'T' THEN BudgetAmount ELSE 0 END )
FROM Budget RIGHT OUTER JOIN Market ON Budget.Customer_Market_code = Market.Market_code
Where Budget.BudgetYear=2007 or Budget.BudgetYear is null
GROUP BY Market_code, Description
ORDER BY Description

-- ------------------GIVES only 12 results -------------------------------



SELECT Market_code, Description,
Revenue = SUM( CASE WHEN BudgetType = 'B' THEN BudgetAmount ELSE 0 END ),
CM = SUM( CASE WHEN BudgetType = 'C' THEN BudgetAmount ELSE 0 END ),
Tooling = SUM( CASE WHEN BudgetType = 'T' THEN BudgetAmount ELSE 0 END )
FROM Budget, Market
Where Budget.Customer_Market_code =* Market.Market_code
AND Budget.BudgetYear=2007
GROUP BY Market_code, Description
ORDER BY Description

-- ------------------GIVES 19 results -the true------------------------------

View 1 Replies View Related

Trust Relation - Linked Server

Nov 7, 2000

Hi Listers,

Can any one clarify me on the following doubt.

I have 2 w2k servers with different domains and On which SQL2k is running on both the Servers. Both the servers don't have any Trust Relations between them.

My questions is, Is it possible to create Linked Servers between sql servers but their Operating Systems doesn't have Trust Relationships?.

Any help would be appreciated.

tks in advance,
Sam

View 3 Replies View Related

Backing Up To Network Drive Without Trust

Oct 23, 1998

I need to know if there is a way to perform a SQL Server 6.5 backup to a remote network drive WITHOUT USING A TRUST LOGIN.

My network administrator refuses to put a TRUST relation on the Primary Domain Controller. I`m not really sure why, but I need a workaround.

Thanks,

"Work-around Bob"

View 1 Replies View Related

Domain Trust - Login Failed: Not A Trusted Sql Connection

Nov 21, 2005

(Cross post from newsgroup)
Attempting to implement Windows authentication between trusted domains. . .
I have a domain trust set up between two domains connected via persistent vpn:

View 4 Replies View Related

Connecting (ODBC) To SQL 2005 Express From Different Domain With Trust

Aug 23, 2007



Hi!
I am trying to establish connection from different domain using ODBC driver with no luck!
I am able to do it within my domain from any place, but it fails from outside. I have two-ways trust established between domains. Users are able to see and use resources both ways.
When I create ODBC it doesn't matter if I use SQL or Windows NT authenctication, I am getting error:

Connection Failed:
SQLState: '01000'
SQLServer Error: 11004
[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]Connection Open (getbyhostname()() )
Connectio Failed:
SQLState: '08001'
SQL Server Error: 11


I tried to set it with TCP Static Port or Dynamic. No difference.
What should I look into?

Any ideas? Any help?

Thanks.

View 7 Replies View Related

XP_SENDMAIL Problem After Windows Trust With Exchange Server Established

Jul 23, 2005

After a trust with exchange server established the xp_SendMailgives the following error:xp_sendmail: failed with mail error 0x80070005Prior to the trust everything worked fine.I have tried the following:1)Checking SQL and SQLAgents accounts all match up with default mailprofile.2)Confirmed I could send from outlook logged in under the account.3)xp_stopmail and xp_startmail4)restarted the SQL Agent5)Confirmed outlook settings as defined in:kb153159 -http://www.sqlnewsgroups.net/link.a...b/153159/EN-US/I also tried a pop3 account just to test, but no luck.I think what is happening is now that the trust is established when SQLmakes a mail contection it thinks it is user admin@<otherdomain> ratherthan admin@<normaldomain> and therefore thinks that agent account isdifferent than the mail account.Please help if you can.Thanks.

View 2 Replies View Related

Establish SQL Connection

Aug 31, 2006

Hi! (my first post)
I'm ASP.NET newbie and i´ve got an SQL connection error, i know why, i didn´t establish a connection...
my questions are: how do i establish the connection state?, and where in my project should i do it?
I added  the connection section to my web.config, is that enough to establish a connection?
 <connectionStrings>
    <add name="buscomConnectionString" connectionString="Data Source=myserver.net;Initial Catalog=mycatalog;Persist Security Info=True;User ID=myuser;Password=mypassword"
      providerName="System.Data.SqlClient" />
  </connectionStrings>

The error i get is:
Object reference not set to an instance of an object.



Description: An
unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the
error and where it originated in the code.

Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.

Source Error:




Line 2443:Line 2444://If connection is not open then attempt to open it.Line 2445:if (connection.State == System.Data.ConnectionState.Closed)Line 2446:{Line 2447:try







Source File: d:UseruscomApp_CodePHP.cs    Line: 2445
   Thanks and cheers! Bill Murphy (litio.net) 

View 4 Replies View Related

Re-establish Database

Mar 5, 2004

I recently upgraded my Laptops operating system to Win XP Pro, and ran into data connectivity problems with my desktop SQL Server 7. To resolve the connectivity problems I removed SQL 7 and reinstalled SQL 7. My connectivity problems have been resolved however I lost the database from my server. The data base exists but it is not recognized from the SQL Server Enterprise Manager.

Is there an easy way to re-establish the database?

Any assistance would be greatly appreciated, I have posted this thread here because there is little activity on the SQL 7 journal it seems that I am behind the curve.

View 2 Replies View Related

Can' Establish Endpoint

Feb 28, 2008



I have two servers both installed sql server.The name of the servers are A and B respectively.
The admin of sql server in A is 'domainuserA', and admin of sql server B is 'domainuserB'.


My purpose is create a mirroring for a database in server A, but i can establish endpoint in server A(network address can not be reached or does not exist), i have grant the 'connect to endpoint' permission to each login .




i past my code:

step1



Code Snippet
--Server A, principal
create database db_test
backup database db_test to disk='\sharefolderdb_test.bak' with init

create endpoint endpoint1
as tcp(listener_port=5002)
for database_mirroring
(role=partner)

alter endpoint endpoint1
state=started

create login [domainuserB] from windows
grant connect on endpoint::endpoint1 to [domainuserB]






step2



Code Snippet
--Server B, mirror
restore database db_test from disk='\sharefolderdb_test2.bak' with norecovery

create endpoint endpoint1
as tcp(listener_port=5002)
for database_mirroring
(role=partner)

alter endpoint endpoint1
state=started

create login [domainuserA] from windows
grant connect on endpoint::endpoint1 to [domainuserA]

alter database db_test set partner='TCP://A.corp.com:5002'


--step3



Code Snippet
----Server A, principal

alter database db_test set partner='TCP://B.corp.com:5002'


this step return a error message:

The server network address "TCP://B.corp.com:5002" can not be reached or does not exist. Check the network address name and that the ports for the local and remote endpoints are operational.







some wrong?

any suggestions would be appreciated.

View 5 Replies View Related

Not Able To Establish A Connection To My Database In C#.

May 2, 2007

Could someone help me out? I am stuck and I don't have $245.00 to pay for Microsoft Technical phone support.
Basically I am trying to establish a connection to my database using C#. When I try to connect I can step into the line of code, but an exception is thrown.
Error message in the debugger:
ServerVersion = 'myConnection.ServerVersion' threw an exception of type 'System.InvalidOperationException'
 
C# code:
SqlConnection myConnection = new SqlConnection("Data Source=BVCOMPUTER;Initial Catalog=TheMarket;User ID =bill;Password=celebrate4ever");
When the above line of code is executed, then In the IDE debugger when I do a watch on myConnection, there is a tree node labeled "ServerVersion" The following messageis displayed there:
Also there appears to be a property of "ServerVersion"  named "base".The error message stored there is the following: base {"Invalid operation. The connection is closed."} System.SystemException {System.InvalidOperationException}
----------------------------------------------------
Note that I can drag and drop a grid control on my web form and point to the database I want to connect to. But for some reason when I manually try to connect, I am not able to.

View 3 Replies View Related

How To Establish Connection To SQL Server?

Mar 31, 2004

in the Quick start, it used connection string ("server=(local)NetSDK;database=pubs;Trusted_Connection=yes") to connect to the SQL db.

Now my working environment is, Im working on my client running .NET Framework as a webserver, and the SQL Server is on another PC as a db server (IP: xxx.xxx.xx.xx, user: webuser, pwd: webuser).

1st Question:
how do I build my connection string for this??
I tried following but no luck:
"user id=webuser;password=webuser;Initial Catalog=Bei;Data Source=xxx.xxx.xx.xx;Integrated Security=SSPI;";


2nd Question:
I just happened to see that ODBC is no more recommended in ASP.NET ?? if that's the case what is the new way to connect to DB ?? by using connection string or what ??


Thanks heaps!
Bei

View 3 Replies View Related

Not Able To Establish Connecton To SQL Server DB

Mar 13, 2006

Hi ,
 
 I got the following error message while trying to establish connection SQL DB : "Could not establish a connection to the database. If you have not yet created the SQL Server database, exit the Web Site Administration tool, use the aspnet_regsql command-line utility to create and configure the database, and then return to this tool to set the provider. "
 
in fact i have ran the utility and added the connection successfully and from the VWD i can see the table for the connections but when i run the ASP.NET Configuration it gives me the above error
 
appreciate ur kind advise
 
tks & rdgs

View 2 Replies View Related

How To Establish Merge Replication

Feb 22, 2001

Hi there,

Can anyone help me configure merge replication between two servers with same server name (select @@servername returns same server name) . When I am trying to establish the replication I am getting error message.

I cannot change the server names because both are production servers, so reinstalling SQL Server is out of question.

Thanks, Jay

View 1 Replies View Related

Could Not Establish A Connection To The Database

Aug 8, 2007

Hi!

My name is George. I have installed Microsoft Visual Web Development 2008 Exress Edition Beta, and when I want to use the Web Site Administration Tool and test the AspNetSqlProvider it says me this:

"Could not establish a connection to the database.
If you have not yet created the SQL Server database, exit the Web Site Administration tool, use the aspnet_regsql command-line utility to create and configure the database, and then return to this tool to set the provider."

I don't know what to I do? I have enabled the IP/TPC and name pipes at SQL Server Surface Area Configuration, and I have used the aspnet_regsql to setup the ASP.NET and SQL Database, but the setup field it says this:

"System.Web.HttpException: Unable to connect to SQL Server database. ---> System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at System.Web.Management.SqlServices.GetSqlConnection(String server, String user, String password, Boolean trusted, String connectionString)
--- End of inner exception stack trace ---
at System.Web.Management.SqlServices.GetSqlConnection(String server, String user, String password, Boolean trusted, String connectionString)
at System.Web.Management.SqlServices.SetupApplicationServices(String server, String user, String password, Boolean trusted, String connectionString, String database, String dbFileName, SqlFeatures features, Boolean install)
at System.Web.Management.SqlServices.Install(String database, SqlFeatures features, String connectionString)
at System.Web.Management.ConfirmPanel.Execute()"

I have enabled the IP/TPC, name pipes and remote connections at the SQL Server Express...

Anybady help me?

Thanks

View 5 Replies View Related

Could Not Establish Connection To Database

May 12, 2007

I am having a great deal of difficulty connecting my version of visual web developer 2005 express to the AspNetSqlProvider as stated in the tutorials online at the web developer center. I keep getting the error below.



"Could not establish a connection to the database.
If you have not yet created the SQL Server database, exit the Web Site Administration tool, use the aspnet_regsql command-line utility to create and configure the database, and then return to this tool to set the provider. "



When I run the utility I still get a connection error using the hostname of my computer and windows authentication.



The setup failed message is as below also:-

"Setup failed.

Exception:
Unable to connect to SQL Server database.

----------------------------------------
Details of failure
----------------------------------------

System.Web.HttpException: Unable to connect to SQL Server database. ---> System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at System.Web.Management.SqlServices.GetSqlConnection(String server, String user, String password, Boolean trusted, String connectionString)
--- End of inner exception stack trace ---
at System.Web.Management.SqlServices.GetSqlConnection(String server, String user, String password, Boolean trusted, String connectionString)
at System.Web.Management.SqlServices.SetupApplicationServices(String server, String user, String password, Boolean trusted, String connectionString, String database, String dbFileName, SqlFeatures features, Boolean install)
at System.Web.Management.SqlServices.Install(String database, SqlFeatures features, String connectionString)
at System.Web.Management.ConfirmPanel.Execute()"



I have tried some of the suggestions on the forum with no result



Please can you help

View 18 Replies View Related

The AspNetSqlProvider Could Not Establish A Connection To The Database.

Aug 8, 2007

Hi!
When I'm going to the Web Site Administration Tool at the Provider tab I click to test the AspNetSqlProvider, but it says
"Could not establish a connection to the database. If you have not yet created the SQL Server database, exit the Web Site Administration tool, use the aspnet_regsql command-line utility to create and configure the database, and then return to this tool to set the provider. "
I have enabled the TCP/IP and name pipes at the SQL Server, and I have created a database using the aspnet_regsql and when I'm going to test the provider it always says me that "Could not establish a connection to the database..."
Can anybody help me?
Thanks

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved