I have SQL SERVER 2005 with SP2 on windows XP professional.
When I execute DROP PROCEDURE manually,it works.
However when I execute inside a loop made using static cursors,
it generates following error
"Could not find server 'drop procedure dbo' in sysservers. Execute sp_addlinkedserver to add the server to sysservers."
OR it gives this error "Could not find stored procedure"
any idea???
a different scenario leads to the same problem, the error message:
Could not find "Standby" in sysservers. Run "sp_addlinkedserver" to add the server to sysservers"
I browsed the thread for the same error message and the solution doesn't applies to me. Here is my system settings. we have a kind of backup system. a primary server is set up to copy the database files to a standby server. when the primary is off, the standby server will take over primary's name and ip. and our application runs on the standby as if in the primary. in both machine the odbc connection are set to point the primary server.
this setup works well in SQL server 2000 for both primary and standby servers, but it gives the error message on SQL 2005 in the standby server. I noticed that this is because the application opens an empty table. after inserting a record by hand, the error has gone away.
I know it doesn't make too much sense, but it 's what I observed. Could anyone give me some input how could this happens and what' s the solution?
HiI am getting the above error message when I try and bind a stored procedure to a gridview:string connectionString2 = ConfigurationManager.ConnectionStrings[project].ConnectionString; SqlConnection con_room_code2 = new SqlConnection(connectionString2); SqlCommand cmd_sofa = new SqlCommand("report", con_room_code2); cmd_sofa.CommandType = CommandType.StoredProcedure; cmd_sofa.Parameters.Add(new SqlParameter("@code", SqlDbType.VarChar)); cmd_sofa.Parameters["@code"].Value = Session["code"].ToString(); SqlDataSource1.ConnectionString = connectionString2; SqlDataSource1.SelectCommand = cmd_sofa.ToString(); plreport.Visible = false; plreport.Visible = true; test.Text = Session["code"].ToString();does any1 know why this is? thanks
View 2 Replies View RelatedI'm getting the following message from a VB6 program running ADO...
It will process a job then I get the message.... [Microsoft][ODBC SQL Server Driver][SQL Server]Could not find server 'FLDB1' in syssservers. Execute sp_addlinkedserver to add the server to sysservers...
This started to happen after I moved the db from SS2000 to SS2005...
Our db server and sql server instance on that server are both named 'FLDB1'... Do I need to run the above execute sp_addlinkedserver command on the new 2005 server?
Thanks-Dave
Hello!
We just upgraded to SQL Server 2005 from SQL Server 2000. The DB was backed up using Enterprise Manager and restored with SQL Server Management Studio Express CTP. Everything went as expected (no errors, warnings, or any other indicator of problems).
The DB resides in a DB Server (Server1) and the application we are running is a Client/Server system where the AppServer resides on Server2.
During the application's operation all read, create, and delete transactions work fine but no update works. When viewing details in Trace Log I see this message after attempting any update:
Could not find server 'Server1' in sysservers. Execute sp_addlinkedserver to add the server to sysservers. (7202)
Any help is greatly appreciated,
Lucio Gayosso
Hi,
I have a program in VB.NET 2003 where I have query "SELECT COUNT(*) FROM master..sysservers WHERE srvname = '" & strServerName & "'". This program copies data from .MDF file to another .MDF file. This query is written since I have created linked server.
Issue 1:
But now I to copy data from .SDF (SQL Server Mobile Edition) to desktop .MDF file. For this I cannot fire the above query on .SDF file. What is the other alternative?
Issue 2:
In the existing prgram that copies data from .MDF to .MDF, I have created linked server. Can I do the same with mobile edition?
Regards,
MI
How to find out all the statistics from all the tables and drop them..any script anyone can help with?
When we are trying to make datatype changes in few related tables,it's giving error saying that some statistics are dependent onthe column blah blah...
Thanks,
Sheila.
Hi everybody, I created several stored procedure in a local sql server 2005 express database, now when I call/execute them in the asp.net 2.0 web page, it returns an error message of "Cannot find the stored procedure '<proc_name>'", this is funny, when I execute the commandin a sql query window "exec sp_GetAllArticles", it also returns cannot find stored procedure, but when I execute the "Use <DBName>" and thenexecute the statement, it works. The sql connection used in codes is ok. So, what I have missed to set or where I made mistake?Code:Inside web.config, <add name="Connectstring" connectionString="Data Source=DENSIASQLExpress;Initial Catalog=DbName;Integrated Security=True" providerName="System.Data.SqlClient" /> inside Load event, DAL.ConnectionString = ConfigurationManager.ConnectionStrings["Connectstring"].ConnectionString; private void DisplayLatestResources() { DAL.CreateCommand("sp_GetLatestFiveTrainingResources"); DAL.ExecuteReader(); SqlDataReader dr = DAL.DataReader; ..... } Try supplying with user id and password, same result...also try using aspnet_regsql.exe, same result also... Thanks in advanced. den2005
View 1 Replies View RelatedThis is my first forray into writing stored procedures and like the manual said created one in SQL Server 2005 parsed or tested it, executed it, tested it again succesfully,need to modify it but can't find it under stored procedures file where I initially right clicked and selected New Stored Procedure.
Any idea where it went?
Hi
This is seshu.
Is there any way to find out the last used stored procedure.
Let me know about this one.
I have a table with the list of all TableNames in the database. I would like to query that table and find any tables used in any stored procedure in that DB.
Select * from dbo.MyTableList
where Table_Name in
(
Select Name
From sys.procedures
Where OBJECT_DEFINITION(object_id) LIKE '%MY_TABLE_NAME%'
Order by name
)
hi friends
i want to know how to calculate year ranging from 1900 to 2000 using store procedure in sql server
I was trying to create stored proc
[code="create procedure dbo.sp_table1
@idint
as
begin
updatetable1
setisarchived = 1,
[Code] ....
But the query was continuously blocking the query below
updatetable1
setisarchived = 1,
modtime = getdate()
whereid = @id
andisarchived = 0
I was not sure, why the create procedure statement is blocking the update statement.
I have a scenario where I need to develop a stored proc to identify invalid input provided.
Following is a sample scenario
Create table product (ProductId varchar(10),SizeId int,ProductColor varchar(10));
insert into Product
select 'Prod1',10,'Black' union ALL
select 'Prod1',10,'BLue' union ALL
select 'Prod2',20,'Green' union ALL
select 'Prod2',10,'Black' ;
[Code] ....
In following TSql Code , Color and Size are optional. Both are provided as comma separated input. I have provided "bbc" as wrong color and "MM" as wrong size. I want to identify if color is invalid or size (MM is in valid for Black and Blue) and to set flag accordingly.
I had tried out join but it is not serving needs.
---===========================================
-- Sql
--============================================
DECLARE
@ProdId varchar(10),
@color varchar(max) = Null,
@size varchar(max) = Null
BEGIN
set @ProdId='Prod1';
[Code] .....
We have a process that uses a stored procedure: sp_MysteryProcedure....
The problem I am having is: I am 95% certain the issue lies with this stored procedure, but I cannot find the process that calls this procedure. It could be a SQL Server Job that calls the procedure directly, it could be an SSIS (*.dtsx) process that calls this procedure, or some other random process.
One of the big issues is we have tons of *.dtsx packages that call a bunch of stored procedures, but it doesn't seem a normal Windows Search (Start --> Search) searches these files (or perhaps something else is going on with this search).
So my question is multi-part.....
1). How would one go about finding a rouge process that loads data via a stored procedure if we believe we know the stored procedures name?
2). How do you search *.dtsx files?
I am getting the error "Could not find server 'bmf' in sysservers. Executive sp_addlinkedserver to add the server to sysservers" when running the following script. if I remove the last bit of the FROM statement (i.e. bmf.dbo.activities.activity_desc actdesc2) then the script runs fine. I'm confused as the same server and DB are being referenced elsewhere in the FROM part of the script.
SELECT organisations.organisation_number, organisations.name, organisations.status,
activities.activity_desc, activity_values.activity_value_desc, organisation_categories.quantity,
orgcat2.activity, orgcat2.activity_value, actval2.activity_value_desc
FROM bmf.dbo.activity_values activity_values, bmf.dbo.organisation_categories organisation_categories, bmf.dbo.organisations organisations,
[code]...
We have more that 500 crystal reports and we would like to find out list of stored procedure used by crystal reports. Can we find out ?
View 4 Replies View Relatedisn't there an automatic log of some sort to check and see what exactly was changed by a given SQL command? A stored proc was ran and I need to figure out what exactly it changed in the underlying table.
View 3 Replies View RelatedIs it possible to find out the last executed date for any stored proc in the database using system tables or writing any other query.
View 2 Replies View RelatedHi,
I am a very new programmer hired to do stored procedures.
I want to drop stored procedures with like names..Can I do that with single command something like
Drop Proc where proc like 'XY%'
Other alternative is write a stored procedure which is a group of stored procedures.. selected from sys.objects.
Please help me ..
Thank you
Swapna
I'm using SQL Serv 6.5. I've got a stored procedure that is DEFINITELY not in use but i can't drop it because it's telling me it is ???
I don't want to stop and start SQL Serv. Any ideas ??
thanks
Paul
I have to run a Big Sproc for make a lot of updates and insert. because trigger it take to many time.
I can drop the trigger before the procedure and recreate it after, but I wondered whether there existed of other solution?
Can I deactive the trigger? I'm affraid too got two copie of code for the trigger that why I dont really like the Drop-Create solution...
Thanks
View 8 Replies View Related
how can I drop a propcedure or a view without error for MS SQL 2000/2500
for a table
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[myTABLE]') AND type in (N'U'))
DROP TABLE [dbo].[myTABLE]
and for a procedure
IF EXISTS ???
DROP PROCEDURE [dbo].[SP_myTABLE_Count]
thank you for helping
hi there
I am using SCPTXFR.EXE to generate script of the database(for backup),using following command.
SCPTXFR.EXE /s abc /d aaa /P abc12345 /f D:HSE0607SCHEMA.sql /q/r/T
Now the script is generating fine, but what i find that there is no statment like
"if not exists(...) "
for the Stored Procedure( i had applied the /r parameter), for the Create Tables it is there.
Why there is no statment IF NOT EXISTS(...) for Stored Procedure?
I need this Line, how can i do this??
Regards,
Thanks.
Gurpreet S. Gill
Hi,I'm tring to call a stored procedure i'v made from a DNN module, via .net control.When I try to execute this sql statement: EXEC my_proc_name 'prm_1', 'prm_2', ... the system displays this error: Could not find stored procedure ''. (including the trailings [".] chars :)I've tried to run the EXEC statement from SqlServerManagement Studio, and seems to works fine, but sometimes it displays the same error. So i've added the dbname and dbowner as prefix to my procedure name in the exec statement and then in SqlSrv ManStudio ALWAYS works, but in dnn it NEVER worked... Why? I think it could be a db permission problem but i'm not able to fix this trouble, since i'm not a db specialist and i don't know which contraint could give this problem. Also i've set to the ASPNET user the execute permissions for my procedure... nothing changes :( Shoud someone could help me? Note that I'm using a SqlDataSource object running the statement with the select() method (and by setting the appropriate SelectCommandType = SqlDataSourceCommandType.StoredProcedure ) and I'm using the 2005 sql server express Thank in advance,(/d
View 3 Replies View RelatedHow can i delete a stored procedure if it exist
like "Drop stored procedure 'sp1' if exist"
We have a secuiry review and they have recommended dropping several xp_ stored procedures. I have tried the drop procedure with no luck, Error 3701, or right click delete in Man Studio, same error. I have granted the user alter permission to the master database and when I try to delete get Error 4606. I try to grant CONTROL permission of the stored proc to the user and get another 4606 error.
Do I just have to control the permissions of these procedures tightly?
Thanks In Advance
MPM
Hey guys, has anyone ever seen this happen:
Try to move stored proc from one DB to another using DTS, errors on create proc. Create proc manually.
Three tables referenced by that stored proc have been dropped and re-created with the same table structure.
I'm not 100% certain that it happened at exactly the same time, but it seems to be around the same time. Any ideas? Anyone seen this happen before?
Hi,I found this SQL in the news group to drop indexs in a table. I need ascript that will drop all indexes in all user tables of a givendatabase:DECLARE @indexName NVARCHAR(128)DECLARE @dropIndexSql NVARCHAR(4000)DECLARE tableIndexes CURSOR FORSELECT name FROM sysindexesWHERE id = OBJECT_ID(N'F_BI_Registration_Tracking_Summary')AND indid 0AND indid < 255AND INDEXPROPERTY(id, name, 'IsStatistics') = 0OPEN tableIndexesFETCH NEXT FROM tableIndexes INTO @indexNameWHILE @@fetch_status = 0BEGINSET @dropIndexSql = N' DROP INDEXF_BI_Registration_Tracking_Summary.' + @indexNameEXEC sp_executesql @dropIndexSqlFETCH NEXT FROM tableIndexes INTO @indexNameENDCLOSE tableIndexesDEALLOCATE tableIndexesTIARob
View 2 Replies View RelatedI developed a ASP.net web application with a MSDE database backend on my laptop(vs.net 2003 XP Pro), then I transferred the website onto a server(Windows Server 2003) and generated a SQL Server 2000 database from the scripts I exported from MSDE(web administrator). The problem I am having is that it can't find any stored procedures. I keep getting errors when logging on, 'Could not find stored procedure "_myProc" '.
Any one with any clues what might be the problem?
Yes I have changed the connection strings.
Thanks in advance
P
I use the following code in ASP.NET 2.0 to update the database:
Dim myConnection As New SqlClient.SqlConnection("server=local);uid=sa;pwd=xxx;database=Northwind")Dim myCommand As New SqlClient.SqlCommand("dbo.spTralen_customer_save 'CACTU'", myConnection)myCommand.CommandType = CommandType.StoredProceduremyConnection.Open()myCommand.ExecuteReader(CommandBehavior.CloseConnection)
I get the following error message: "Could not find stored procedure..."
The sp is in the database and dbo is the owner of the sp and I'm logged in as sa as you can see above. It doesn't matter if I remove the "dbo." from the sql command, it still doesn't work. If I remove the parameter value 'CACTU' above I get an error message saying that the sp expects the parameter so the sp is obviously in the database.
Can someone please help me as soon as possible!// Gato Gris
Not sure if this question belongs here or in a .NET forum.
But Im going to give it a shoot. The problem is that Im getting the following error: "Could not find stored procedure 'xxx'".
Ive never used stored procedures before, so what I am wondering is there anything basic that Im forgetting?
I have this simple stored Procedure:
ALTER PROCEDURE Person_info
@FirstN varchar(128),
@LastN varchar(128)
AS
SELECT FName, LName
FROM Person
WHERE (FName = @FirstN) AND (LName = @LastN)
and each time I call this procedure I get the prior stated error.
returnValue = sqlcmd.ExecuteReader(); //crashes when this line executes.
Ive found some people talking about this and it might be caused due to the "initial catalog=<database name>" in the connection string is missing. I tried that but didnt work.