Could Not Find The Index Entry For RID...
Jul 23, 2005
Greetings. Today I was testing the sql backup/restore functions on our
primary server. I was able to backup my database without any problems
but when I tried to restore it, I received an error "Could not find the
index entry for RID '3610200101a03cc4b49d8bbc84bac50cbe042cecf76' in
index page (1:40), index ID 0, database 'walkthrough'." Thinking that
data had been corrupted somehow I tried another database and received a
similar error for that database. In the past, our service provider has
attempted to restore data to this server and the restore failed do to
another data corruption. The problem is, I can't find out where the
corruption is located or how to fix it.
When I open the restored database in enterprise manager, it returns the
above error and is unable to get a listing of my tables. In query
analyzer I am able to view my data but receive the index error when I
attempt to look at the information_schema data. When I try to run a DBCC
CHECKDB on the corrupted database it reports 0 errors and 0
inconsistencies.
So my diagnosis of the problem is that something is corrupting my system
tables and that problem shows up whenever I try to restore data from a
backup. There could be a hardware failure but I believe the failure
would affect more then just the sql system tables. Can anyone offer any
advice on how to find the corruption?
Thank you in advance
Richard Bailey
*** Sent via Developersdex http://www.developersdex.com ***
View 1 Replies
ADVERTISEMENT
Jul 9, 2004
Hi,
I'm running a merge replication on a sql2k machine to 6 sql2k subscribers.
Since a few day's only one of the merge agents fail's with the following error:
The merge process could not retrieve generation information at the 'Subscriber'.
The index entry for row ID was not found in index ID 3, of table 357576312, in database 'PBB006'.
All DBCC CHECKDB command's return 0 errors :confused:
I'm not sure if the table that's referred to in the message is on the distribution side or the subscribers side? A select * from sysobjects where id=357576312 gives different results on both sides . .
Any ideas as to what is causing this error?
View 3 Replies
View Related
May 29, 2008
I'm seeing this error in my application log. Not quite sure how it started happening all of a sudden. I'm not quite sure where to start on this one.
Any suggestions greatly appreciated!
Thanks,
Mike123
Exception information:
Exception type: SqlException
Exception message: Operation failed. The index entry of length 1007 bytes for the index 'tblMessage25' exceeds the maximum length of 900 bytes.
View 12 Replies
View Related
Mar 12, 2007
Finding the earliest datetime entry, and then updating the database on these reults.
I need to query a table of data that has multiple datetime entries in it relating to individual customer records. So one customer could have 1 entry, or it could have 10 entries. I need to be able to identify the earliest of these records, and then on this earliest record update a field value. Example:
My Fields in the table are as follows.
Log_ID, Cust_Ref_No, ActionDateTime, Action_Code
The Log_ID is the primary key, and I need to update the Action_Code field on only the earliest entry against a customer record i.e.
12345,ABCDEF,01/01/2007 00:00:01.000,6
12346,ABCDEF,01/01/2007 09:00:00.000,6
12347,ABCDEF,01/01/2007 17:00:00.000,2
In the above I need to change the first record Action_Code from a 6 to a 1, but leave all other records unaffected.
All help greatly appreciated, Thanks : o )
View 10 Replies
View Related
May 26, 2005
Hi,
I have a table which has a few fields, one being "datetime_traded". I need to write a query which returns the row which has the closest time (down to second) given a date/time. I'm using MS SQL.
Here's what I have so far:
Code:
select * from TICK_D
where datetime_traded = (select min( abs(datediff(second,datetime_traded , Convert(datetime,'2005-05-30:09:31:09')) ) ) from TICK_D)
But I get an error - "The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.".
Does anyone know how i could do this? Thanks a lot for any help!
View 2 Replies
View Related
Dec 19, 2005
Please help
1. my database can not truncate log and I use this command
BACKUP LOG IMVDB2 WITH NO_LOG
and after that I received result as below
->The log was not truncated because records at the beginning of the log are pending replication. Ensure the Log Reader Agent is running or use sp_repldone to mark transactions as distributed.
2. so I drop all replicate but it's still return same error
so I try to run
DBCC CHECKDB --> but no error meesage
DBCC CHECKALLOC --> but no error meesage
DBCC CHECKTABLE ('sysindexes') --> but no error meesage
but I tried to run
3. DBCC PAGE (IMVDB2, 1, 13015, 3) i recieved
-->Server: Msg 2591, Level 16, State 14, Line 1
Could not find row in sysindexes with index ID 2 for table 'object ID (334220541)'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
so what can I do the next to fix this problem, please help[/b]
View 4 Replies
View Related
Mar 22, 2006
On the Enterprise Manager of the MS-SQL server, how do I find or see the database index in there? Both that was done by SQL query or Stored Procedure?
Thanks...
View 4 Replies
View Related
Nov 18, 2004
I'm trying to establish the mb usage of a series of nonclustered indexes, I'm used to using the manage indexes GUI in 6.5, and showcontig doesn't quite give me what I want, any suggestions?
View 2 Replies
View Related
Mar 27, 2008
We're looking at optimizing some of our tables because we have indexes on columns that are not used. So for example we might have a table that has 6GB of data and 4GB in indexes (according to sp_spaceused). We need to know how much of the 4GB of indexes is consumed by each of the indexes individually. I've tried dbcc showcontig, but that doesn't tell me the amount of space used by the index that I run it for.
Second (and by far not as important), is there a way to determine how much space is being consumed by data in a specific column. The original creator of some of the tables added an incrementing identity column that is used no where in the system. I'd like to be able to say..."If we drop this column we'll save XXX in space."
Knowing the index space is more critical, the column space would be nice but not necessary.
View 2 Replies
View Related
Apr 29, 2003
There is a index: CustomerInfo_1
with keys: customerId, EnteryDate DESC
I could not find where the order of index key (i.e. whether the key is ascending or descending) is stored?
I tried system tables such as sysindexes and sysindexkeys tables. But could not find it.
Any help in this regard will be truly appreciated.
Thank you.
Regards,
Anuj Goyal
View 4 Replies
View Related
Apr 29, 2003
There is a index: CustomerInfo_1
with keys: customerId, EnteryDate DESC
I could not find where the order of index key (i.e. whether the key is ascending or descending) is stored?
I tried system tables such as sysindexes and sysindexkeys tables. But could not find it.
Any help in this regard will be truly appreciated.
Thank you.
Regards,
Anuj Goyal
View 2 Replies
View Related
Sep 13, 2004
Can anyone tell me a good way to monitor which indexes are not being used? Over time, I'm sure there are extraneous indexes in our database, which I would like to get rid of.
Any ideas would be appreciated.
Thanks,
Rob
View 3 Replies
View Related
Mar 27, 2014
I need to find all the index and the creation date. I did cross apply of sys.objects & Sys.indexes on name column. I am getting some but the team is saying they created so many. Any other option to find Indexes and their creation date?
View 2 Replies
View Related
Dec 28, 2014
This is my table:
use tempdb
go
if object_id('Data', 'u') is not null drop table Data
go
with temp as (
select top 10000 row_number() over (order by c1.object_id) Id
from sys.columns c1 cross join sys.columns c2
[code]....
What index would be best for these three queries? With best I mean the execution time, I don't care about additional space.
This is the index I currently use:
create nonclustered index Ix_Data on Data (StateId, PalletId, BoxId, Id)
The execution plan is SELECT (0%) - Stream Aggregate (10%) - Index Scan (90%).
Can this be optimized (maybe to use Index Seek method)?
View 7 Replies
View Related
Jun 28, 2004
I have many databses and we are trying to see how many can be replicated. Found out 90 on't have primary keys.
Next option, find unique indexed tables and convert them to PKeys. Now my question is how do I fin that a table has a unique index and column has "allow null" Please remember I am not asking to find Unique constraint.
In other words , folowing query
select TABLE_NAME from INFORMATION_SCHEMA.TABLE_CONSTRAINTS where CONSTRAINT_TYPE in('UNIQUE') won't tell you if a table has a unique index.
Please help.
View 5 Replies
View Related
Oct 4, 2015
I want to create a lot of index for my database for performance.
But I need find memory usage by indexes.
How to find memory usage by index in sql server?
View 1 Replies
View Related
Oct 27, 2015
We are on SQL 2014...we have a bunch of views in a database where we are trying to find the views which have more than 16 columns max for unique index/constraint...this is needed so we can convert them to indexed views...
View 1 Replies
View Related
Oct 20, 2006
please explain the differences btween this logical & phisicall operations that we can see therir graphical icons in execution plan tab in Management Studio
thank you in advance
View 3 Replies
View Related
Oct 4, 2015
i want to create a lot of index for my database for performance.but i need find memory usage by indexes.
How to find memory usage by index in sql server?
View 9 Replies
View Related
Nov 22, 2005
Can someone please help me solve the following error? I am not sure of the version my hosting company is using and where to get the manual.
Could not add the entry because: You have an error in your SQL syntax. Check the manual that corresponds to your MySQL server version for the right syntax to use near '-id, title, entry, date_entered) VALUES ('testing', 'testing', . The query was INSERT INTO blog_entries (blog-id, title, entry, date_entered) VALUES ('testing', 'testing', 'testing'.
PHP Code:
if ($dbh = mysql_connect ('localhost', 'blu6592_money', 'rich')) {
print '<p>Successfully connected to MySQL.</p>';
if (mysql_select_db ('blu6592_myblog')) {
print '<p>The database has been selected.</p>';
} else {
die ('<p>Could not select the database because: <b>' . mysql_error() . '</b></p>');
}
$query = "INSERT INTO blog_entries
(blog-id, title, entry, date_entered)
VALUES (0, '{$_POST['title']}',
'{$_POST['title']}',
'{$_POST['entry']}', NOW())";
if (mysql_query ($query)) {
print '<p>The blog entry has been added.</p>';
} else {
print "<p>Could not add the entry because: <b>" . mysql_error() . "</b>. The query was $query.</p>";
}
} else {
die ('<p>Could not connect to MySQL because: <b>' . mysql_error() . '</b></p>');
}
mysql_close();
Thanks in advance.
View 1 Replies
View Related
Aug 13, 2005
(I don't post here often, so in case I'm violating long-standing taboosof this newsgroup, I apologize in advance for calling a relation atable, using nulls, and other ignorant, destructive, and comtemptibleterminology.)I have a table that's keeping a sort of running log of different typesof changes to pieces of data. The table has a foreign key of the databeing changed, the foreign key for the type of change occuring, someinformation about the change in a couple more columns, and a timestampfor each entry. So it's:dataIDeventIDeventInfotimestampWhat I'd like to do, if at all possible, is a single SQL query that,given a dataID, returns the most recent eventInfo and timestamp foreach eventID. Is this possible?Many thanks.-Eric
View 3 Replies
View Related
Sep 30, 2015
I am using Full Text Index to index emails stored in BLOB column in a table. Index process parses stored emails, and, if there is one or more files attached to the email these documents get indexed too. In result when I'm querying the full text index for a word or phrase I am getting reference to the email containing the word of phrase if interest if the word was used in the email body OR if it was used in any document attached to the email.
How to distinguish in a Full Text query that the result came from an embedded document rather than from "main" document? Or if that's not possible how to disable indexing of embedded documents?
My goal is either to give a user an option if he or she wants to search emails (email bodies only) OR emails AND documents attached to them, or at least clearly indicate in the returned result the real source where the word or phrase has been found.
View 0 Replies
View Related
Dec 5, 2007
Dear All.
We had Teradata 4700 SMP. We have moved data from TD to MS_SQL SERVER 2003. records are 19.65 Millions.
table is >> Order_Dtl
Columns are:-
Client_ID varchar 10
Order_ID varchar 50
Order_Sub_ID decimal
.....
...
..
.
Pk is (ClientID+OrderId+OrderSubID)
Web Base application or PDA devices use to initiate the order from all over the country. The issue is this table is not Partioned but good HP with 30 GB RAM is installed. this is main table that receive 18,0000 hits or more. All brokers and users are using this table to see the status of their order.
The always search by OrderID, or ClientID or order_SubNo, or enter any two like (Client_ID+Order_Sub_ID) or any combination.
Query takes to much time when ever server receive more querys. some orther indexes are also created on the same table like (OrderDate, OrdCreate Date and Status)
My Question are:-
Q1. IF Person "A" query to DB on Client_ID, then what Index will use ? (If any one do Query on any two combination like Client_ID+Order_ID, So what index will be uesd.? How does MS-SQL SERVER deal with these kind of issues.?
Q2. If i create 3 more indexes on ClientID, ORderID and OrdersubID. will this improve the performance of query.if person "A" search record on orderNo so what index will be used. (Mind it their would be 3 seprate indexes for Each PK columns) and composite-Clustered index is also available.?
Q3. I want to check what indexes has been used? on what search?
Q4. How can i check what table was populated when, or last date of update (DML)?
My Limitation is i Dont Create a Partioned table. I dont have permission to do it.
In Teradata we had more than 4 tb record of CRM data with no issue. i am not new baby in db line but not expert in sql server 2003.
I am thank u to all who read or reply.
Arshad
Manager Database
Esoulconsultancy.com
(Teradata Master)
10g OCP
View 3 Replies
View Related
Oct 28, 2015
My SSIS package is running very slow taking so much time to execute, One task is taking 2hr for inserting 100k records, i have disabled unused index still it is taking time.I am rebuilding/Refreshing indexes and stats once in month if i try to execute on daily basis will it improve my SSIS Package performance?
View 2 Replies
View Related
Jan 22, 2006
Keep getting this error when positioning to the last page of a report.
Using Server 2003...SqlRpt Svcs 2000 sp2
Detail error msg:
Exception of type Microsoft.ReportingServices.ReportRendering.ReportRenderingException was thrown. (rrRenderingError) Get Online Help
Exception of type Microsoft.ReportingServices.ReportRendering.ReportRenderingException was thrown.
Index was out of range. Must be non-negative and less than the size of the collection. Parameter name: index
Anyone have any suggestions? Any way to find out what collection is blowing?...or where parameter name: index comes from?
View 47 Replies
View Related
Apr 12, 2004
Anyone Got any other advice?
http://www.dbforums.com/t993214.html
View 3 Replies
View Related
May 30, 2007
"High priority system task thread: Operating system error Exception 0xAE encountered."
we are seeing this on one of our development servers, running SQL 2005 Enterprise SP1. The symptom is that after the sql service has been running a while (order of days), this error starts getting written to the sql server log file over and over, and eventually the logfile fills the drive.
Apparently it's fixed by this hotfix, but our ops team doesn't want to install this - they'd rather just cycle the service and delete the log when it happens.
I was wondering if anyone else has seen it might know the root cause so we might be able to workaround it without cycling the service. I know, lame question. The correct answer is "install the hotfix" or "install sp2" but our ops team won't do that for now...
www.elsasoft.org
View 2 Replies
View Related
Jul 24, 2007
Hi All,
I have a table with name C1_Subscribers with three fields (1)-MobileNumber [varchar]
(2)-ReceivedTime [datetime]
(3)-Status [char].
Now here how to remove duplicate entry of same mobile number to MobileNumber field?
Regards
Shaji
View 4 Replies
View Related
Jun 20, 2008
hello friends
i have table1 and 200 coulumn of table1 :) i have 647.600 records. i entered my records to table1 with for step to code lines in one day :)
i select category1 category2 and category3 with select code but i have just one index.. it is productnumber and it is primarykey..So my select code lines is so slow.. it is 7-9 second.. how can i select in 0.1 second ? Should i create index for category1 and category2 and category3 ? But i dont know create index.. My select code lines is below.. Could you learn me and show me index for it ?? or Could you learn me and show me fast Select code lines and index or etc ??? Also my search code line have a dangerous releated to attaching table1 with hackers :)
cheersi send 3 value of treview1 node and childnode and child.childnode to below page.aspx :)
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
If Not Me.IsPostBack Then
If Request("TextBox1") IsNot Nothing ThenTextBox1.Text = Request("TextBox1")
End If
If Request("TextBox2") IsNot Nothing ThenTextBox2.Text = Request("TextBox2")
End If
If Request("TextBox3") IsNot Nothing ThenTextBox3.Text = Request("TextBox3")
End If
End If
Dim searchword As String
If Request("TextBox3") = "" And Request("TextBox2") = "" Then
searchword = "Select * from urunlistesi where kategori= '" & Request("TextBox1") & "'"
End If
If Request("TextBox3") = "" Then
searchword = "Select * from urunlistesi where kategori= '" & Request("TextBox1") & "' and kategori1= '" & Request("TextBox2") & "'"
End If
If Request("TextBox3") <> "" And Request("TextBox2") <> "" And Request("TextBox1") <> "" Then
searchword = "Select * from urunlistesi where kategori= '" & Request("TextBox1") & "' and kategori1= '" & Request("TextBox2") & "' and kategori2= '" & Request("TextBox3") & "'"
End If
SqlDataSource1.SelectCommand = searchword
End Sub
View 11 Replies
View Related
Jul 3, 2006
Hi everyone,
When we create a clustered index firstly, and then is it advantageous to create another index which is nonclustered ??
In my opinion, yes it is. Because, since we use clustered index first, our rows are sorted and so while using nonclustered index on this data file, finding adress of the record on this sorted data is really easier than finding adress of the record on unsorted data, is not it ??
Thanks
View 4 Replies
View Related
Nov 28, 2006
Hello,
I have a table of names/dates as such:
Class 1 1/1/2007Class 1 1/3/2007Class 1 1/5/2007Class 2 2/1/2007Class 2 2/3/2007Class 3 3/1/2007
What I want to do is select only the nearest entry from the list for each distinct class, so the results are like this:
Class 1 1/1/2007Class 2 2/1/2007Class 3 3/1/2007
So basically, I want the first upcoming class in the list for each distinct class name. How do I do this? I'm using SQL 2005 Express.
Thanks.
View 3 Replies
View Related
Jun 4, 2007
How do i do that... in sch lab, the lecturer said: Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click Try SqlDataSource2.SelectParameters("Title").DefaultValue = txtProductTitle.Text GridView1.DataBind() If GridView1.Rows.Count > 0 Then //if no repeated Label1.Text = "Existing Record Found. Please enter another Software." Else 'SqlDataSource1.Insert() 'Label1.Text = txtProductTitle.Text & " successfully added to the database." End If Catch ex As Exception Label1.ForeColor = Drawing.Color.Red Label1.Text = "An error occured!" & ControlChars.NewLine & ControlChars.NewLine & _ ex.Message.ToString() End Try End Sub but its not working for me... the GridView1.Rows.Count is always 0, if there is a repeat, it should be > 0
View 4 Replies
View Related
Nov 9, 2007
Hi, I know this is probably very simple but I am pretty new to this and have tried looking but cant seem to get the search criteria right. I have a database with a storeDate field which is of shortdatetime type. I am connecting to the database (MSSQL) via a stored procedure and returning all the records. I then use the code foreach (DataRow dr in ds.Tables[0].Rows) { DateTime dtTo = DateTime.Now; DateTime dtFrom = DateTime.Parse(dr["storeDate"].ToString()); TimeSpan diff = dtTo.Subtract(dtFrom); } I am basically trying to find out the age of the database entry by subtracting it from the current DateTime so i can delete records over a certain age. The problem (at least one of them!) is retrieving the "storeDate" object from the database and storing it in the dtFrom object. I have tried just assigning it directly as dtFrom = dr["storeDate"] and various other methods but I just don't know enough to assign it! Can anyone help me with this or spot any other mistakes in this process of removing old files automatically. Greatly Appreciated,Sean.
View 4 Replies
View Related
