I have inherited a sql server 2005 installation (not working) and although i can connect to the server using studion express, as soon a i try to do anything like create a new database i get loads of errors claiming 'Could not load the DLL xpstar90.dll'.
the dll exists and appears to have a reasonable set of security set on it, so i am stumped as to where to go next to disnose the problem.
any suggestions?
regards
TheMightyPuzzled
Hi,
Here I will describe my problem.
1. We are loading large amount of data from database on background thread which is starting on Application_start event in global.aspx.cs file.The data is later cached for subsquent request to improve the performance.
2. Now when we put the application on web farm garden, it is not able to load the application.
3. We are sending the request the servers through Router kind of application.
4 This application is working fine on single server enviornment.
Please help us.
Ajay Kumar Dwivedi
I just have done the SSIS example in the tutorial document included when install SQL 2005 ENT. I have a problem that whenever I test to run, the service load all data from source with out noticing about the data (I mean it load all the data to the destination), I do it several time and it continue to load all without checking. That mean the data is dublicated when the schedule run???
I think there should be a paramete or something like that to help the engine just load the new data to the destination. Could you help please?
Thank
Hello,
I have a big problem and i'm not able to find any hint on the Network.
I have a window2000 pc, VS2005,II5 and SQLServer 2005(dev edition)
I created an SSIS Package (query to DB and the result is loaded into an Excel file) that works fine.
I imported the dtsx file inside my "Stored Packages".
I would like to load and run the package programmatically on a Remote Scenario using the web services.
I created a solution with web service and web page that invoke the web service.
When my code execute:
Microsoft.SqlServer.Dts.Runtime.Application.LoadFromDtsServer(packagePath, ".", Nothing)
I got the Error:
Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.
The error message doesn't help so much and there is nothing on the www to give me and advice....
Is it a SSIS problem???
Thank you for any help!!
Marina B.
Hi there.
I have an assembly, call it A1, that I've deployed to a SQL Server 2005 database. I can use the managed stored procedures from A1 in SQL Server no problem.
In A1 there is a bit of code which uses the Assembly.Load() method, so load another assembly and use instances of class found in that external assembly. However, when I run the managed stored proc in A1 that uses Assembly.Load() I get the error:
Could not load file or assembly 'A1, Version=1.0.0.0, Culture=neutral,PublicKeyToken='????' or one of its dependencies. The system cannot find the file specified.
(note: for security I've changed some of the above line).
So I changed the Assembly.Load() to use
System.Data,Version=2.0.0.0,Culture=neutral,PublicKeyToken=b77a5c561934e089
I re-built the project, re-deployed it and ran the code in SQL Server - it worked. I could create an instance of a System.Data.DataSet for example. So why can't I load my own custom assembly? My assembly does have a strong name and it's installed in the GAC. I wrote a console app to try and Assembly.Load() my custom assembly and that worked fine (it was also running on the same server as the SQL Server).
So it's defiantely the SQL Server that can't 'see' my customer assembly. What do I need to do this assembly so that SQL Server will allow me to Assembly.Load it, just as it can with System.Data?
Thanks
Jas.
New to SQL Server :(
load a txt file to SQL
there is a field, data type is numeric (13,6).
But in the file, it is like this: 9999999999999
How do I add the decimal points to make it: 9999999.999999????
Thanks a lot
I want read,validate based on the xsd and load
the xml files from a location.
Please suggest i am new to SSIS..
Thanks for your help in advance...
Hi,
Any way to read/load only the first row of a flat or excel file?
I would like to generate a unique ID ( int) everytime a ETL job run and insert that Id to a table called Audit..
how can i do this in a SSIS package?
Hi allHave you ever used [Web assistant Wizard] in Sql server to create a web page from a predefined [Select] statement or Stored procedure??when i want to do so and when i complete the Wizard i encounter with the following Error message :
---------------------------Microsoft SQL-DMO (ODBC SQLState: 42000)---------------------------Error 22272: Cannot load the DLL xpweb70.dll, or one of the DLLs it references. Reason: 126(error not found).---------------------------OK ---------------------------
Could anyone help me please?Kind Regards.
Hello,
How is load balancing working in SQL Server 2000. We want to have two different servers as a back end for our web based eCommerce application. Is this possible? While there be any modification requirement in the application?
Hello Folks,
Appreciate if somebody take out a moment and help me here. I'm having a production database backing up every night at 10:00PM. I've one more development server sitting side by and want this development server to load the production backup copy every night. But the problem what I'm encoutering is, When there are users connected to my development server, It wont get load saying "Database is in Use".
Therefore is there a command, I kill all users at one short and have a task which will load the database? If so, Please let me know how to do this.
Thank you very much
Steve
Hi!
We make complete data load once a week. Now we need to make additional steps to append data on daily basis. We have primary key on the table and it doesn't allow appending duplicate rows.
What steps should we create to append data?
Thank you,
Elena.
What is the meaning of Loadbalancing and how can I use this term to my advantage.
Q2. How would I know that I need to do load balancing and how can I set it up.
I have wrote load balancing in BOL and did not get any thing on it. can anyone refer me to where I can read more about it.
thanks
Ahmed
Hi All,
We have a Intranet Application which uses IIS / SQL Server 7.0, we are trying to support the application for 30,000 + users.
Since SQL Server can only support upto 32676 user connections (Theoretically), is it possible achieve this with clustering / dynamic load balancing. Does MSCS and SQL 7.0 support this. Any other ideas, 3rd party software etc?????
Any input will be of great help.
Thanks
NK
Hi Everyone,
I'm trying to load data from one server to another every night by creating a dts package and then scheduling the same at night for some reason its failing and i have no clue why is it happening here is the error what it gives me:
DTSRun: Loading... Error: -2147008507 (80074005); Provider Error: 0 (0) Error string: Unspecified error Error source: Microsoft Data Transformation Services (DTS) Package Help file: sqldts.hlp Help context: 713 Error: -2147467259 (80004005); Provider Error: 11 (B) Error string: [DBMSSOCN]General network error. Check your network documentation. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0. Process Exit Code 1. The step failed.
Could any one tell me what's goin on and how to solve this i will be very greatful for you.
And another thing is when i created this package and ran at that time or any other time without scheduling them its working good with successful results.
Thanks in advance..
Murthy
Hi everobody!
When I run :
LOAD DATABASE db1
FROM DISK = 'c:mssqldatadb1_backup.dat'
go
I got error message:
Msg 3201, Level 16, State 1
Can't open dump device 'c:mssqldatadb1_backup.dat', device error or device off line. Please consult the SQL Server error log for more details.
How can I fix the problem?
Thank you.
Alona
Hi,
is it possible load csv file from web
located at www...
to db using dts ?.
Thank you
alex
Hi,
does anybody know how to restore transaction log dumps (several dumps in one dump device) with TSQL statements ?
I tried "Load transaction devicename"
this fires an error message which complains that i have to use right sequence.
How do i tell the load command which sequence it shall use ?
You can use "load headeronly" command which gives you all entrys from the dumpdevice. How can i use this information ?
Thanks
Yorn
We have setup SQL Server 2000 with a VB application. I want to stress test the application / server by stimulating 400+ users. Is there any tool or utility available to do so?
Thanks in advance,
jfk
Hello,
Does everyone have experience to load a big database? My SQL Server 2K is running on W2K. The database is 4GB, and the biggest table has 12 million records. Thanks a lot.
ytz
Hi,
Is there any way to maintain history of data while incremental load without using the Slowly changing dimension(SCD) concept?
Hello,I was trying to user the code below to run a DTS job. The job failswhen I get to the piece of code that begins:EXEC @rc = sp_OAMethod @PackageToken,'LoadFromSQLServer', ...It looks like it tries to look for the DTS package, because it takes 45seconds to execute when the server name is correct, leading me tobelieve that it is properly finding the server. Am "MyDTSPackage" isthe name of I saved my DTS Package under save as. I enter it in thelist below using single quotes just like I enter the server name.I am wondering if it is a permissions issue. I am running the thisstored procedure from SQL Query Analyzer:EXEC usp_OATest(The Stored Procedure gets created without a problem...it is running itthat is causing issues.)The error message is the custom one that shows at theError:line.Also, master..xp_cmdshell 'DTSRun....' works fine, but I would like tobe able to use this other method.Thanks in advance for any help!RyanCREATE PROC usp_OATestASDECLARE @rc intDECLARE @PackageToken intDECLARE @GlobalVariableToken int--Load DTS PackageEXEC @rc = sp_OACreate 'DTS.Package',@PackageToken OUTPUTIF @rc <> 0 GOTO ErrorEXEC @rc = sp_OAMethod @PackageToken,'LoadFromSQLServer',NULL,'ServerName',NULL,NULL,256,NULL,NULL,NULL,'MyDTSPackage'IF @rc <> 0 GOTO Error <------ERROR DETECTED HERE--execute packageEXEC @rc = sp_OAMethod @PackageToken,'Execute'IF @rc <> 0 GOTO Error--destroy packageEXEC sp_OADestroy @PackageTokenIF @rc <> 0 GOTO ErrorGOTO DoneError:EXEC sp_OAGetErrorInfo @PackageTokenRAISERROR('Error during package preparation or execution', 16, 1)Done:RETURN(@rc)GOEXEC usp_OATest
View 1 Replies View RelatedHi dear members,Can onyone please tell me that how can we load multiple files/ or evena single .SQL file stored on any physical location(Hard Disk) from SQLprompt.i have written some scripts in diffrent files, now i want to run thosescripts, Do i always need to manually open those scripts and run it onquery analyser or is there some way out.Please HELP!!!
View 2 Replies View RelatedHow much traffic/load can a database server running MS SQL server takebefore it can't handle it anymore? And when that time comes, what are therecourses? Am I able to load balance it between separate servers?
View 3 Replies View RelatedPlease someone help!!!!
I have 3 GB XML file and I dont know what is right way to load it into tables. I am new to SSIS. Is SSIS is right tool????? Do I need developers help????
Please guide ASAP.
Thanks
Shriji
the connection string in my application daynamic ..changed by changing the development environmet ..how can i load a data from file to sql server destination without hard coded the connection
thx
need advice for below scenario
currently am having a active / passive cluster sql 2000 server, due to the amount of transactions am moving to new high end servers with sql 2005 cluster.
incase the new cluster also doesnt stands the load what approach i should use similar to load balancing.
with regards
alby peter
After working on this with no luck for a couple of days I am sick of pounding my head against a wall! I need help!! I am trying to load 3 flat files into one table and I am not sure how to do it using SSIS. I just need some guidence as to where to go. I can load 1 flat file into the table but 3 is the issue and combining the data so it is loaded in sequential rows. I have had it load, but it has been in three pieces one after the other. I am just not sure where to go and I really need some help! Thank you for any assistance or advice!
View 5 Replies View RelatedHello,
I have had numerous problems installing SQL Server 2005 on various machine. Most of those problems are related to insufficient rights to various users. But I am baffled by this one:
Setup Failed: Could not load SQLSpars.dll
Why would this happen? I see this message after beginning the SQL Server 2005 Standard setup and making my installation selections and beginning the install. The process stops after about 30 seconds, and displays the above message.
My machine is running Windows XP SP2.
Any ideas???
Thank you,
Jon500
Hi all
I wonder if someone can help me with a snippit of code or a referance to a tutorial.
I have my database grid veiw on a vb 2005 form and the data is related to equipment data capturing.
With each set of data I want a image to be loaded into a image box to show the piece of equipment.
If anyone can help with the code needed it will be much appreciated.
Thanks
Rob
What are the best practices to avoid CPU load in SQL Server?
Hello,
I am a total beginner to SQL and I'm unable to load the samples. I downloaded the .msi file and installed it but I don't know where to go from here.
Am I importing one of the samples in SQL or do I open them in Visual Basic?
The samples folder has several sub-folders with no executable so I don't know where to begin.
Can someone point me in the right direction?
thanks in advance.
Chris