"Your
SQL Server installation is eigher corrupt or has been tampered with
(could not open SQLEVN70.rll). Please uninstall then re-run Setup to
correct this problem."
What do I do? It says to uninstall/reinstall, but what DO I install? I need a step-by-step procedure to follow to get rid of this.
I am receiving the following error message at bootup: "Your SQL Server installation is either corrupt or has been tampered with (could not open SQLEVN70.RLL)."
My Operating System is: Windows XP Media Center Edition Service Pack 2 (build 2600)
I have tried reloading XP and Windows to no avail.
HELP!
When I boot up my system (xp)I get the following message ' sqlevn70.rll is either damaged or corrupt...' what should I do?
Hello,
Would someone be so kind as to guide me to where I can download this SQLEVN70.rll . I downloaded SQL express 2005 and net framework 2.0 to try and reinstall it to my windows xp pro after I deleted sql server per Microsoft advice due to business contact manager messing up my outlook express.
Is there a better way because every time I try to open Outlook I get the msg. sql server not found and cannot find database for business contact mgr. I removed this application.
Thank you in advance.
In doing a System Restore an error occurred in my SQL 2005. I've researched the thing, and am prepared to uninstall and reinstall SQL Server 2005, however, even tho I am administrator it will not uninstall. It will not reinstall over the previous install that's in place.
When I go through Control Panel to Add and Remove, when I click uninstall SQL Server 2005 it merely flashes a new window for a second and then does nothing. It will not start an uninstall action.
I don't know what to do short of a full XP Pro re-install.
I get the below error only when my IDE open. It connects well when it is found closed.
[SqlException (0x80131904): Cannot open user default database. Login failed.Login failed for user 'JPASPNET'.]
I could solve this by giving the logged in windows user to impersonate under IIS window > WEBSITE > ASP.NET tab > EDIT CONFIG > APPLICATION tab
But I wish someone could give me the proper solution.
I almost tried all from giving ASPNET user as a administrator to configuring the same in Express management tool.
Environment: XP pro, VWD and SQL Express
Hi there,
I got an approach like that:
1) Read something from DB - check the value, if true stop if false go on2) Read the second Value (another SQL Statement) - check the value etc.
Now I could open the connection at 1) and if I have to go to 2) I leave the connection open and use the same connection at 2). Is it ok to do that?
The other scenario would be opening a connection at 1), immediately close it after I read the value and open a new connection at 2).
Thanks for the input!
Post installation of SQL Server 2014 Express edition, I am able to connect to the Database Instance.
But while opening a new query window in SSMS or opening a table getting the error:
Package 'RadLangSvc.Package, RadLangSvc, Version 12.0.0.0, Culture=Neutral, Public Token=89845dcd8080cc91' failed to load
Object reference not set to an instance of an object. (mscorlib)..Have already tried installing the componentsDACProjectSystemSetup_enu.msi, TSql LanguageService_enu.msi, DACFramework_enu.msi from path VS 2010 WCU DAC.
Hi,
I am using SSRS Microsoft SQL Server Reporting Services Designers
Version 9.00.1399.00. I want to open linked report in new window.
I tried whats mentioned in http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=240172&SiteID=1 but i get an error on Window.Open method.
How do I solve the problem?
Thanks
Just a quick question about connection management. My application willnever need more than 1 or 2 connections about at any given time. Also, I donot expect many users to be connected at any given time. For efficiency, Iwould like to keep connections alive throughout the lifetime of the objectsrequiring them, rather than opening a new connection, executing code andthen closing it again. What is the most efficient way of doing this?Should I perform the open/close or just one open when I create the objectand a close when I dispose of it?
View 1 Replies View Relatedhi alli cant open sql server.i try window authentication and sql server authentication butit doesnt open. how can i do ? Thanks
View 4 Replies View RelatedHello Im trying to open an example RDL file I downloaded..the file type is XML ..when i open it up it contains all XML
How can i view this in GUI format from Visual Studio? It is an example off how to use default 'select all' in multivalued parameters so i assume I can see it working as a project ? Not sure how to use this XML file?
anybody please help
thanks
hi , can any one pls help
what are all the minimum required permissions to do ddl , dml statements on database.
we have so many logins .which and every having sysadmin, i removed sysadmin permission and assign db_owner permission to 7 users and only 3 users having error
cannot open database ' db_nam' requested by login. the login failed. Login failed for user 'ohmvarun1'
pls help me on this isssue some urgent
regards
I have to insert one table by using the concept OPENXML
But i want to insert a table lot of fields i require, in the open XML few fields fields are there , so i want to selet some fields from other table
can u guide me for this scenario to INSERT some fields from one table and some in OPENXML as a single insert statement
Awaiting for Reply PLease
Thanx
Hi all, now, i create a job to open a page on timely basis. The job's Vb script is like that:Dim WshShellSet WshShell =CreateObject("WScript.Shell")WshShell.Run ("http://www.google.com")Set WsShell = Nothing when i run that job, i got that error:The job succeeded. The Job was invoked by User hostusername. The last step to run was step 1 (Step 1). how can i solve it? i still don't know whether that script will open a webpage or not
View 6 Replies View RelatedHi,
I have couple of .DBF files that i need to open which software should i use to open them.... can i open it with Sqlserver
Regards
Karen
Hello everybody I would like to know more about the number of possible connection to a sql server is it by pool ? or there is max for all the database ? all the server ? how I can get the number of connection open ? Thx in advance
View 2 Replies View RelatedWhen I try to open a .MDF file with SQL Server Management Studio Express last version I get an error :
There is no editor available for "DATABASE.MDF"
Make sure the application for the file type (.MDF) is installed.
How can I open the MDF file.I tried to use also the database NORTHWIND.MDF provided with
MSSQL 2000 sample but the same error.
What can I do ?
I am using Microsoft SQL Server 2005 Express.
I want to open the .MDF file to create a index for Full Text Search.
Thank You !
"There is already an open datareader associated with this command which must be closed first."
I have received this same error before, but I'm not sure why I'm getting it here.'Create a Connection object.
MyConnection = New SqlConnection("...............................")
'Check whether a TMPTABLE_QUERY stored procedure already exists.
MyCommand = New SqlCommand("...", MyConnection)
With MyCommand
'Set the command type that you will run.
.CommandType = CommandType.Text
'Open the connection.
.Connection.Open()
'Run the SQL statement, and then get the returned rows to the DataReader.
MyDataReader = .ExecuteReader()
'Try to create the stored procedure only if it does not exist.
If Not MyDataReader.Read() Then
.CommandText = "create procedure tmptable_query as select * from #temp_table"
MyDataReader.Close()
.ExecuteNonQuery()
Else
MyDataReader.Close()
End If
.Dispose() 'Dispose of the Command object.
MyConnection.Close() 'Close the connection.
End With
As you can see, the connection is opened and closed, and the datareader is closed. Here's what comes next...'Create another Connection object.
ESOConnection = New SqlConnection("...")
If tx_lastname.Text <> "" Then
If (InStr(sqlwhere, "where")) Then
sqlwhere = sqlwhere & " AND lname like '" & Replace(tx_lastname.Text, "'", "''") & "%'"
Else
sqlwhere = " where lname like '" & Replace(tx_lastname.Text, "'", "''") & "%'"
End If
End If
If tx_firstname.Text <> "" Then
If (InStr(sqlwhere, "where")) Then
sqlwhere = sqlwhere & " AND fname like '" & Replace(tx_firstname.Text, "'", "''") & "%'"
Else
sqlwhere = " where fname like '" & Replace(tx_firstname.Text, "'", "''") & "%'"
End If
End If
dynamic_con = sqlwhere & " order by arr_date desc "
'create the temporary table on esosql.
CreateCommand = New SqlCommand("CREATE TABLE #TEMP_TABLE (".............", ESOConnection)
With CreateCommand
'Set the command type that you will run.
.CommandType = CommandType.Text
'Open the connection to betaserv.
ESOConnection.Open()
'Run the SQL statement.
.ExecuteNonQuery()
End With
'query our side
ESOCommand = New SqlCommand("SELECT * FROM [arrest_index]" & dynamic_con, ESOConnection)
'execute query
ESODataReader = ESOCommand.ExecuteReader()
'loop through recordset and populate temp table
While ESODataReader.Read()
MyInsert = New SqlCommand("INSERT INTO #TEMP_TABLE VALUES("......", ESOConnection)
'Set the command type that you will run.
MyInsert.CommandType = CommandType.Text
'Run the SQL statement.
MyInsert.ExecuteNonQuery()
End While
ESODataReader.Close() 'Create a DataAdapter, and then provide the name of the stored procedure.
MyDataAdapter = New SqlDataAdapter("TMPTABLE_QUERY", ESOConnection)
'Set the command type as StoredProcedure.
MyDataAdapter.SelectCommand.CommandType = CommandType.StoredProcedure
'Create a new DataSet to hold the records and fill it with the rows returned from stored procedure.
DS = New DataSet()
MyDataAdapter.Fill(DS, "arrindex")
'Assign the recordset to the gridview and bind it.
If DS.Tables(0).Rows.Count > 0 Then
GridView1.DataSource = DS
GridView1.DataBind()
End If
'Dispose of the DataAdapter
MyDataAdapter.Dispose()
'Close server connection
ESOConnection.Close() Again, a separate connection is open and closed.I've read you can only have 1 datareader available per connection. Isn't that what I have here? The error is returned on this line: MyInsert.ExecuteNonQuery()
Help is appreciated.
Hi Forum, I dont have a lot of experience with SQL and have a problem running .sql file.
I use VWD 2005 ex and SQL server 22005 ex
Im following some instructions to create the .mdf database I need for API.
Step one; was to create a blank .mdf, which ive done!
Step two;
Create the Tables and Stored Procs. Tables and stored procs are defined in two script files CreateTables.sql and
CreateStoredProcs.sql within Database folder. Run CreateTables.sql first
How do I open and run the .sql files in VWD 05? many thnaks Paul
Can't open Northwind - asp.net - dataaccess-sqldatasource
I remembered doing walkthrough using Northwind. However it wasn't an http project but a file project using the development server. Northwind allowed me to add, edit and insert, and the web page looked fine.
I opened a simple project just to see whether I could get my sqlserver on the internet. (vs studio 2005, sqlserver 2005)
I created the project in http location http://localhost/Northwind . I dragged a sqldatasource to the page, configuring it to display ID and ProductName. I clicked advanced, but noticed the generate insert, edit and delete were grayed out. That told me something was wrong with my authetification.
I configured my sqlserver 2005 to have integrated security.
I built the solution and website, then pressed cntl-F5. I got a login error. Nowhere did the page ask me for username and password. First questions - how do I get this to open up a web page, and how to I get it to allow me to generate insert, edit and delete statements?
dennist685
Server Error in '/Northwind' Application.--------------------------------------------------------------------------------
Cannot open database "Northwind" requested by the login. The login failed.Login failed for user 'YOUR-02910F1DF1ASPNET'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Cannot open database "Northwind" requested by the login. The login failed.Login failed for user 'YOUR-02910F1DF1ASPNET'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): Cannot open database "Northwind" requested by the login. The login failed.Login failed for user 'YOUR-02910F1DF1ASPNET'.] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735123 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1838 System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +359 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121 System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +137 System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +83 System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1770 System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17 System.Web.UI.WebControls.DataBoundControl.PerformSelect() +149 System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70 System.Web.UI.WebControls.DetailsView.DataBind() +4 System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82 System.Web.UI.WebControls.DetailsView.EnsureDataBound() +181 System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69 System.Web.UI.Control.EnsureChildControls() +87 System.Web.UI.Control.PreRenderRecursiveInternal() +41 System.Web.UI.Control.PreRenderRecursiveInternal() +161 System.Web.UI.Control.PreRenderRecursiveInternal() +161 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1360
I set up SQL Server 7 desktop, sp3 on my laptop, but get
the following error each time I try to use the Open Table
item on the popup menu in Enterprise Manager:
The query cannot be executed because some files are either
missing or not registered. Run setup again to make sure
all required files are registered.
Re-running setup does nothing, and an uninstall and re-
install didn't fix the problem either.
I can't count the number of times I've set up SQL7 in the
past, and I never had this error before.
The PC is running Win2K Pro and has Office XP, and
ColdFusion 4.5a installed.
Hi fellow listers:
We installed an aplication written by us in VB5 and Sql 7.0
in one of our customers site.
The customer is telling us that we left "open conections"
when our program finishes.
I want to check in our server, testing our programs, which, where and
how many conections we open and which are those we left opened.
We look with the Server Enterprice Manager in the Managment under currect activity, but we don't know how to interpret the data there, and
we don't know how to see wich are the conections we left opened.
Any help will be appretiated.
TIA
Gerardo Alvarez
www.asaven.com
This morning, I got below error message when I open the table from Enterprise Manager. Anybody can tell me how can I solve this problem?
************************************************** **********
An unexpected error happened during this operation.
[Query]-Query Designer encountered a Query error. Unspecified error.
************************************************** ***********
Thanks.
I kept getting "Can't open SQL server" when I tried running Crystal report from SMS
In SQL Enterprise Manager, Edit Registration properties, Use Window NT authentication is checked.
What account should be used in SMS to generate SMS crystal report. I appreciate any advice?
SQL server 6.5 stopped responding. The last error messages in the SQL Server Error Log / NT Event log suggested that I increase the Open Objects / Open Databases values. I rebooted the server, increase the configuration values, and rebooted the server again for the new configuration to take affect. I suspect that the front-end application does not release the objects properly when it should; therefore increasing Open Objects / Databases configuration values will only be a temporary fix until they reach the new maximum in some time. However to prove that I need to be able to determine how many open objects / databases are on the server at a point of time. Is there a procedure or a method to determine how many open objects / dtabases are on server?
Any comments or suggestions are greatly appreciated.
Thank you
Marina Somers
Hi!
I've a dude. Can I suspend (delete, stop) open transactions in Sybase SQL Server 10 x? How? (at times I can't dump transaction log). I hope you can help me.
Thanks very much, in advance.
Hi,
I have MSDE SP3 and the only thing that I have changed recently is my Windows login Password. In the
Enterprise Manager the SQL server is registered using mixed authentication.
When I try to open any DTS in Design mode, I get a error dialog with the title 'DTS Design error' and
saying that
"Error occured during creation of a DTS package"
and then when I click on the OKAY button I get the 2nd error dialog saying:
"The selected package cannot be opened. The DTS designer has been closed."
Can someone please help me out here.
Thanks.
I was given a dts file to look at based on the Northwinds DB. The file was not password protected and comes from a SQL Server Configured exactly like mine. Is there a way to open this file in the DTS design window? I could not find anything in BOL or help.
Thanks
I have just created a package to import data from excel files, and perform some simple sql statements. I saved the package, and when I try to re-open it, I get the following error:
"Error Source: Microsoft OLE DB Provider for SQL Server
Error Description: [DBNETLIB][ConnectionOpen (Connect()).] SQL Server does not exist or access denied."
And after I hit th "OK" button, I get the next error msg:
"The selected package cannot be opened. The DTS Designer has been closed"
Is my package completely lost? Can I open it elsewhere, or by changing some properties somewhere? Also, is there something I can do to avoid this in the future?! I hope all my work isn't lost ...
Any help would be greatly appreciated!
Brian
Hi
How do we will know whether transaction is open or closed.
Nageswar
Kudos to y'all!!! In the syntax...
SELECT * FROM OPENQUERY (linked server name, 'SQL Syntax')
...I'm having problems with the " ' " symbol. The SQL Syntax inside the OPENQUERY has a condition in the WHERE clause that has to be enclosed in apostophes. If it's a numeric value, I think that it doesn't need to be enclosed in apostrophes. But because the values are letters, it has to be enclosed in apostrophes. is there any way to work around this problem? I'm fetching data from an Oracle linked server by the way...
we have a flat text file that has blanks in some of the date columns.
when we use open xml to import data to a table, the blank date values get loaded as 1900-01-01. why does this happen? Is there any way to get these blanks loaded as NULLs to the table.