Hi, I'm getting this error
[Microsoft][ODBC SQL Server Driver][SQL Server]Could not retrieve replication information for table 735393739. Verify that the table has a primary key, and then rerun the Log Reader Agent.Please help me!
Hi,
I am working on inserting information into a DB and then retrieving the ID created for that Data to use elsewhere in my code. I have the code below but I do not know how to get toOutput parameter. Can anyone please help?
CREATE PROCEDURE dbo.InsertProduction
@DATEOUT datetime(8),
@DATEREQUIRED datetime(8),
@PREPAREDBY varchar,
@COMMENTID INteger,
@TOTALQUANTITY INteger,
@VENDORID INteger,
@WPO varchar,
@TCAPONUMBER INteger,
@APPROVEDBY varchar,
@Identity int OUT
AS
INSERT INTO PRODUCTION (DATEOUT,DATEREQUIRED, PREPAREDBY, COMMENTID, TOTALQUANTITY, VENDORID, WPO, TCAPONUMBER, APPROVEDBY) VALUES( @DATEOUT, @DATEREQUIRED, @PREPAREDBY, @COMMENTID, @TOTALQUANTITY, @VENDORID, @WPO, @TCAPONUMBER, @APPROVEDBY)
SET @Identity = SCOPE_IDENTITY()
'collect all the information from the form and then apply all and then update
'Get a reference to the Production table.
Dim dtProduction As DataTable = DS.Tables("Production")
Dim dtLineItem As DataTable = DS.Tables("LineItems")
' Create the SqlCommand to execute the stored procedure.
Production.InsertCommand = New SqlCommand("dbo.InsertProduction", connection)
Production.InsertCommand.CommandType = CommandType.StoredProcedure
' Add the parameter for the CategoryName. Specifying the
' ParameterDirection for an input parameter is not required.
'Production.InsertCommand.Parameters.Add("@CategoryName", SqlDbType.NVarChar, 15, "CategoryName")
Production.InsertCommand.Parameters.Add("@DATEOUT", SqlDbType.DateTime, 8, "CategoryName")
Production.InsertCommand.Parameters.Add("@DATEREQUIRED", SqlDbType.DateTime, 8, "CategoryName")
Production.InsertCommand.Parameters.Add("@PREPAREDBY", SqlDbType.VarChar, 50, "CategoryName")
Production.InsertCommand.Parameters.Add("@COMMENTID", SqlDbType.Int, 4, "CategoryName")
Production.InsertCommand.Parameters.Add("@TOTALQUANTITY", SqlDbType.Int, 4, "CategoryName")
Production.InsertCommand.Parameters.Add("@VENDORID", SqlDbType.Int, 4, "CategoryName")
Production.InsertCommand.Parameters.Add("@WPO", SqlDbType.VarChar, 50, "CategoryName")
Production.InsertCommand.Parameters.Add("@TCAPONUMBER", SqlDbType.Int, 4, "CategoryName")
Production.InsertCommand.Parameters.Add("@APPROVEDBY", SqlDbType.VarChar, 50, "CategoryName")
' Add the SqlParameter to retrieve the new identity value.
' Specify the ParameterDirection as Output.
Dim parameter As SqlParameter = Production.InsertCommand.Parameters.Add("@Identity", SqlDbType.Int, 0, "ProductionID")
parameter.Direction = ParameterDirection.Output
' Create a new row with the same schema.
Dim dr As DataRow = dtProduction.NewRow()
'you need the ID from this to insert into the Production DB
' Set the value of all the columns.
dr("DateOut") = CDate(DateTimePicker1.Text)
dr("DateRequired") = CDate(DateTimePicker2.Text)
dr("VendorID") = CInt(vendorbox.SelectedValue)
dr("HomeAddress") = txtApproved.Text.ToString
dr("ApprovedBy") = txtPrepared.Text.ToString
dr("TCAPO") = CInt(txtTCAPO.Text.Trim)
dr("CommentID") = CommentID
dr("TotalCost") = CDec(txtTotals.Text)
dr("TotalQuantity") = CInt(txtQtyTotal.Text)
' Add to the Rows collection or table .
dtProduction.Rows.Add(dr)
'Update the Production Table and then retrieve the ID created in this case
Production.Update(dtProduction)
Dollarjunkie
I have a report and it retrieves information from an etl logging table which contains this info: etl_process_name, active_since_date, last_run_date.
When the packages are executing, the table cant be queried because it is in a transaction. Therefore the report keeps generating :s
The thing I want is that: If I query that table (with the report to show the logging table information) and the packages are executing, I want to see the values of the table before the transaction.
What I tried:
From sql management studio:
ALTER DATABASE MyDataBase
SET ALLOW_SNAPSHOT_ISOLATION ON
set transaction isolation level snapshot
go
SELECT etl_process, last_run, active_since FROM config.etl_settings
I did this while the packages were executing and it works but it won't work when I execute the same SELECT statement from the Dataset in the report. How is that possible? Does it have something to do with setting the database options for all users?
Additional info:
I'm database owner
The report solution has a shared datasource which refers to the same database
If I had a bunch of paragraphs stored in a database field, is there a way, when displaying that data, that I can write instructions to only retrieve the very first paragraph?
View 4 Replies View RelatedHi, all..
I want to know the query to retrieve Column information that we can see from table Design view of Enterprise manager, such as Column name, Pk or not, FK table, Data Type, Null or not, Description(Specially Descrition).
Is there any sp for this or any query for this?
Thank you all...
Hello,
I need to retrieve all the information about all the foreign key constraints,inorder to store them temporarily (to be deleted later)and then recreated after making the necessary modifications to the concerned tables.
The stored proc sp_helpconstraint shows all the constraint types, their user-defined or system-supplied name, the columns on which they have been defined, and the expression that defines them.But I don't know whether it can be manipulated to get what I want.I need to get it done programmatically..so that I can integrate it in my program which I'm building up progressively.
Any help or scripts would be appreciated!
Hi All,
I am in process of transfering data from Sybase to Sql Server using SSIS 2005
have taken a Data Flow Task in Control Flow tab
In Data flow tab, I have taken one Ole DB Source and One OLe DB Destination
For the source, I am using Sybase Adaptive Server Anywhere Provider 8.0
For Destination, I am using Sql Server 2005 database
In Ole Db Source Editor ,
For OLe Db Connection Manager, I choose Sybase Connection
For Data access mode, I choose Table or View
For Name of the table or the view, I choose a table by name Table1( it lists all the tables from Sybase database)
When i click on preview button or Columns link, I get the following Error
Error at Data Flow Task [OLE DB Source [1]]: An OLE DB error has occurred. Error code: 0x80040E21.
Error at Data Flow Task [OLE DB Source [1]]: Unable to retrieve column information from the data source. Make sure your target table in the database is available.
------------------------------
ADDITIONAL INFORMATION:
Exception from HRESULT: 0xC020204A (Microsoft.SqlServer.DTSPipelineWrap)
Please help me out.
Thanks in Advance
Srinivas
Till recently we were using the following code to retreive schema information of columns of tables
Dim schemaTable = connection.GetOleDbSchemaTable( _
System.Data.OleDb.OleDbSchemaGuid.Columns, _
New Object() {Nothing, Nothing, tableName, Nothing})
Now instead of getting the name of table (which i was using as param for filtering) i'm going to receive a sql-query. Now my question is if I were to get a query like the following :
SELECT
[EmployeeID],
[Title] + ' ' + [LastName] + ' ' + [FirstName] AS FullName,
[BirthDate],
[Address],
[City] + ', ' + [Region] + ', ' + [Country] + ' - ' + [PostalCode] AS FullAddress
FROM [dbo].[Employees]
Then how can I retrieve the schema information of only the columns present in the query.
(Its possible that i might get a query with multiple tables with joints)...
Hi,
I am trying to set up a data flow task. The source is "SQL Command" which is
a stored procedure. The proc has a few temp tables that it outputs the final
resultset from. When I hit preview in the ole db source editor, I see the
right output. When I select the "Columns" tab on the right, the "Available
External Column List" is empty. Why don't the column names appear? What is
the work around to get the column mappings to work b/w source and
destination in this scenario.
In DTS previously, you could "fool" the package by first compiling the
stored procedure with hardcoded column names and dummy values, creating and
saving the package and finally changing the procedure back to the actual
output. As long as the columns remained the same, all would work.
Thats not working for me in SSIS.
Thanks in advance.
Asim.
Hello, I am getting very frustrated! I have got a Foreach loop container which I am processing files within a folder. I have a flatfile connection manager which I have set up using a test file and have updated the expressions attribute to be the package variable I set up in the collection for the loop container however everytime I run it I get the error: 0xC0202094 cannot retrieve the column information from the flatfile connection manager. I can only guess that it is either the variable being passed to the connection manager or the way I set up the connection manager. When I msgbox the variable in a script component before the dataflow step, the variable for the file seems fine. Any suggestions are REALLY appreciated.
Yours
Jayne
I've developed a package that is working well at development machine from VS 2013 for a sample flat file. Also, over development machine, I've deployed it to SSISDB catalogue and even from there also it is running well for the same file.When the same package is deployed to production server's SSISDB catalogue database, it throws following error while processing the same sample flat file, “Unable to retrieve column information from the flat file connection manager”
View 5 Replies View RelatedHello Everybody ..
Greetings !!
I wanted information on Transactional Push replication between SQL Servers . I have one table on SQL Server 6.5 and there are certain text in the table with single quotes .
When i replicate this table to SQL Server 7.0 the text appears in double quotes on SQL Server 7.0 .
Can anyone help regarding this problem ? Has it something to do with version problem .? Where can i get more information on this issue ?
Many thanks . An early response will be highly appreciated .
Hello Mr. Paul...
Thank you so much for your prompt response . Is it possible to change the settings of the Quoted Identifiers ? How can we do it in SQL Server 6.5 and SQL Server 7.0 ? Do you have any info. on the same . ?
Thanks once again .
Yatin.
Please provide me a column-level merge replication in SQL Server 2005. In the SQL Sever books online, I could able to get very few informaiton about this topic. Please provide me a best practices for using this kind of conflict resolution in Merge-replication.
View 5 Replies View RelatedWhen I try to open the subscribers tab in the publisher and distributor properties in SQL Enterprise Manager I get the following error:
SQL Enterprise Manager could not retrieve the list of registered subscribers.
Error 8152: String or binary data will be truncated
Anyone who has experienced similar problems or has a solution?
Best Regards
MF
I want to make a query, stored procedure, or whatever which will only display the primary key where there does no exist a foreign key in linked table.For example. If I had two tables with a one to many relationship.A [Computer] has one or more [Hard Drives]. I want to select only those computers which do not have a Hard Drive(s) associated with them. That is, show all computers where the Computer_ID field in the [Hard Drives] table does not exist. This seems simple but I'm drawing a blank here.
View 1 Replies View RelatedIn Master tabel i have these date datas
2015-05-10
2015-05-11
2015-05-12
SO when i try to load from Master table to parent and child table i am using using expresssion like
select B.ID,A.* FROM FLATFILE_INVENTORY AS A JOIN DMS_INVENTORY AS B ON
A.ACDealerID=B.DMSDEALERID AND A.StockNumber=B.STOCKNUMBER AND
A.InventoryDate=B.INVENTORYDATE AND A.VehicleVIN=B.VEHICLEVIN
WHERE convert(date,A.[FtpDate]) = convert(date,GETDATE()) and convert(date,B.Ftpdate) = convert(date,getdate()) ;
If i use this Expression i am getting the current system date data's only from Master table to parent and child tables.
My Problem is If i do this in my local sserver using the above Expression if i loaded today date and if need to load yesterday date i can change my system date to yesterday date and i can run this Expression.so that yeserday date data alone will get loaded from Master to parent and child tables.
If i run this expression to remote server i cannot change the system date in server.
while using this Expression for current date its loads perfectly but when i try to load yesterday data it takes current date date only not the yesterday date data.
What is the Expression on which ever date i am trying load in the master table same date need to loaded in Parent and child table without changing the system Date.
I'm using an ObjectDataSource in Visual Studio to retrieve records from a SQL Server 2005 database.
I have a very simple dilemma. In a table I have fields FirstName, Surname, Address1, Address2, Address3 etc. None of these are mandatory fields.
It is quite common for the user not to enter data in Address2, Address3, so the values are <null> in the SQL table.
In Visual Studio 2005 I have an aspx form where users can pass search parameters to the ObjectDataSource and the results are returned according to the passed in parameters.
The WHERE clause in my Table Adapter is:WHERE (Address1 LIKE @Address1 + '%') AND (Address2 LIKE @Address2 + '%') AND (Address3 LIKE @Address3 + '%') AND (FirstName LIKE @FirstName + '%') AND (Surname LIKE @Surname + '%')
If, for example, I simply want to search WHERE FirstName LIKE ‘R’, this does not return any results if the value of Address3 is <null>
My query is this: Could someone please show me the best way in Visual Studio 2005 to return records even if one of the Address fields is <null>.
For reference, I have tried: Address3 LIKE @Address3 + '%' OR IS NULLThis does work, however itsimply returns every instance where Address3 is <null> (accounting for about 95% of the records in the database). Thanks in advance Simon
Hi,
In my Sql Sever i have added one Database "Devtools", by restoring it from .bak file. Now In my asp page I want to Display a Datagrid with data from a table "Devices". I want to Generate the Gridview dynamically. The columns in the table are dynamic they are not constant so I want to generate my Gridview dynamically. So I want to get the columns info of the table and based on that I want to dynamically add the columns to the table. So how to get the info of the table first. Is there any query where i can get the table info
Hello:
I have an app that needs to retrieve the list of tables in an SQL database. I see that there is a way to do this with the OLEdb provider (GetOleDbSchemaTable() ), but I can't find a sibling method in SQL. IS there one/ Any Ideas?
Mike
In oracle there is a describe command:
describe table_name
This command will tell you the columns names, datatypes, and length of the columns for that particular table. Does anyone know if there is a simliar command in SQL server that would do that? The only way that I have found so far is to do a join of the syscolumns with sysobject by table name.
Okay, I'll admit it: I am not a Guru. Far from it. So here is one of the zillion tasks I cannot do - unfortunately it is one that I need to have done... :
I need a recordset containing the Name, Datatype, Size, Precision, and Name_of_parent_table of all columns in all non-system tables in a given database.
Most likely this can be accomplished with one or two SPs, but which ones? And how?
Is there any Kind Soul out there, perhaps?
Peter
i need help printing only certain rows from within a table.. for instance, if my table looks like this :
+-------------------+----------------+----------------------+
| Description | Heading | Link |
+-------------------+----------------+----------------------+
| Google | Heading 4 | www.google.com |
| Toms Hardware | Heading 3 | www.tomshardware.com |
| Anandtech | Heading 2 | www.anandtech.com |
| check this out | Heading 1 | www.henryadams.com |
| another heading 4 | Heading 4 | www.heading4.com |
| test | Heading 3 | www.test3.com |
| heading 4 agagin | Heading 4 | laksjdf;alkf |
| new heading test | newHeadingTest | www.newheadingtest |
+-------------------+----------------+----------------------+
and i want to only print out the results for "Heading 4" under the "Heading" column, and only have the results print out once, using php.. how would i do this?
The Headings are inputed by the user through a web interface i created where the user may either select an exisiting heading or type in a completely new one that has nothing to do with any of the others.
thanks for any and all of your help..
Hi,
Is it possible to retrieve column information alone in the sp_columns command? I saw that it has an additional option "@column_name". But when I include it in my sql, it doesn't work the way I had expected it to..
I had tried sp_columns @table_name='mytable', @column_name='COLUMN_NAME'
I expect just the column names alone in the resultset. What am I doing wrong here?
Thanks and Regards,
Celia.
Hi,
I have two tables - a stock table and a transaction table. The stock table is called stock and the transaction table is called trans. The table make a point of sale database. Both table have a joining field called prod_no.
I want to extract the stock line by querying stock.prod_no that are not present in the trans table for a period of time specified.
Basically, I want to find dead stock lines that have not been sold and, therefore, are not in the transaction table but that have a stock figure. I have to enter in a start and end date paramater using the ddate field in the trans table. I have looked at left, right and outer joins but with no luck and don't even know if this is the correct query type to use.
any help would be much appreciated,
I am new to using sqlserver and have been given the task to get the columnname, data type and the description from a given table and put this intoanother table. Can this be done?Thanks in advance.Jeff Magouirk
View 2 Replies View RelatedHi
I have a problem I am trying to ascertain the quality of the data in the table of a system we are migrating from one database to another.
We have already taken the step of converting it into SQL server to make sense of it now I wnat to query the data itself
To do this I set up a query that went through sysobjects and syclumns and listed the tables and their columns
What I want to do now is use this information to query the data elements themselves to determine where we should concentrate our data mapping on.
I started out with a cursor doing this
declare @table varchar(50)
declare @col varchar(50)
declare @result int
declare count_cursor cursor scroll
for select tname,cname from infotemp
open count_cursor
fetch from count_cursor
into @table,@col
while @@fetch_status=0
BEGIN
exec ('select count('+@col+') from '+@table)
Fetch next from count_cursor into @table,@col
END
close count_cursor
deallocate count_cursor
But I am having problems getting the counted value into the result value from the exec statement
Anybody got any ideas
Thanks
I would like to know how to (if it is at all possible) in SQL (or even ADO) to retrieve all the data concerning database X's
a) Tables
b) Tables column names
c) Tables column's data types
I don't want to use the doa.tabledefs object.. .i would prefer to do it in SQL, but using ADO objects (since I am developing stuff in VB) would be ok too.
Please Help.. i have been going crazy trying to find anything useful.. email me back please!
Thanks,
Matt
Hi,
I have a database with two handred tables.I want to get a list that have table name and numbers of record in each table.
Would you please give me a idea if you know how to do this with query or build-in stored procedure.
Thanks a lot
Mark
Hi,
I need to provide a report that lists the databases in each instance, then the tablenames and the number of rows in each table.
Is there any easy way to do this in SQL 2005?
Cheers
Gregg
I remember once using a command in Query Analyser that gave me all theinformation about a table. It showed details about the columns,constraints, keys, indexes etc.I can't remember how I did this? Can anyone help me?It could of been a stored proc that I called or a query on the systemtables.I do know that it was very simple to do and it was executed in QueryAnalyser.Can anyone help me?
View 2 Replies View RelatedI am working on moving information from one of our databases into a newer one the company has recently setup. I am working in MS SQL Server 2012 and am trying to Inset/Update (depending on the information) a part table. I will list the two tables I am working on as Old (where I am getting the information) and New (where it is to be inserted into).
The old table has about 250 columns of information, most of which is not needed. The needed information is as follows: Name, ID, Component1, Component1_PIN,Component1_SN, Component1_Description, Component2, Component2_PIN, Component2_SN. The component section repeats up to Component12.
The new table has columns setup as such: Name, ID, Case, CasePIN, CaseSN, Case_Desc, Processor, ProcessorPIN, ProcessorSN, Processor_Description, Memory, MemoryPIN, MemorySN, Memory_Description, etc.
The issue I am having is that in the old table each component can have Case, Processor, Memory, etc in that one column. I need to insert Case, Memory, etc into the correct column in the new table while keeping intact the rest of the information.
Example:
Old Table
Name | ID | Component1 | Component1_PIN | Component1_SN | Component1_Description | Component2 | Component2_PIN | Component2_SN | Component2_Description
Nest8 | 5682 | Case | 901834 | 237848117 | Black, rectangular | Memory | 9081234 | 5398798134 | NULL
Nest8 | 5978 | Case | 901463 | 237848138 | Black, rectangular | Processor | 2394875 | 2903857809 | Bad
Reds3 | 5683 | Memory | 2405 | 89752342 | Crucial | HardDrive | 92387595 | 457982234 | NULL
Bass | 5644 | HardDrive | 79872346 | 5321675789 | NULL | Case | 10984528 | 3498769872 | NULL
I am not sure how to loop through and grab each part and place it in the column it needs to be while keeping it with the ID.
I want to do something similar to ExecuteScalar in ADO.net but instead in T-SQL.Basically I want to do a query that will return the first value in the table queried and put it into a variable. How do I do this?Thanks in advance.
View 3 Replies View Related