Could Not Set Ignore Failure For OLE DB Destiantion Component
Feb 23, 2007
I am using Microsoft SQL Server Integration Services Designer
Version 9.00.1399.00.
My OLE DB Destiantion component is inserting data into a table. When there is duplicate it will failed. But I want ignore this since I know data is same. But even I set Ignore Failure from OLE DB Destioantion Editor. It will not work and every time you reopen editor, the buttom drop down box always showing as " Fail componet". When I try run it, it will always fail on the inserting duplicated rows.
Does anyone know how can I tell servies ignore this error.
Data flow A take data from the Excel File A, Data B from Excel File B, Data C from Excel File C. What I'd like to do is that if something goes wrong on Data Flow A I would be alerted but the package should continue to running. The same for the DataFlow B, if A it's ok go on, if B fail send me the mail but continue until the end (so running the Data Flow C).
What happens when you add the Ignore Case flag into the mix?
I'm having a hell of a time - I'm dealing with an SCD situation using TableDifference component and I have both existing dimensions and new data coming in, each go through identical Case-Insensitive/Sort with remove duplicates, but I'm getting identical new and deleted records detected - I think because of ordering issues. I'm still trying to whittle the test case down, but I think data from all around the records I'm investigating seems to get sorted in between them, so I'm having trouble getting a small test case built.
I think the mixed case data is the root of the problem, and I think the design is bad, but before I go back to the technical lead, I need to understand enough to show that you cannot take two pipelines sorted and de-duped case-insensitively and then do a case-sensitive table difference operation.
I have a script component in a data flow task that acts as a destination source. I need to know how to access the DTS Task Result object to declare failure in the task if something goes bad. I'm not sure how to access this object via the object model. Can someont send me a sample of how to do this?
Since installing the client tools for SQL 08 R2 on my laptop, I am running into the following error when trying to open a step within a SQL job:
Microsoft SQL Server Management Studio  Creating an instance of the COM component with CLSID {AA40D1D6-CAEF-4A56-B9BB-D0D3DC976BA2} from the IClassFactory failed due to the following error: c001f011. (Microsoft.SqlServer.ManagedDTS)
ADDITIONAL INFORMATION: Â Creating an instance of the COM component with CLSID {AA40D1D6-CAEF-4A56-B9BB-D0D3DC976BA2} from the IClassFactory failed due to the following error: c001f011. (Microsoft.SqlServer.ManagedDTS) Â Is there a patch out for this?
I have a package that has a data lfow task. this task imports data from a db2 database (using the IBM Ole DB provider fro db2) and adds it to sql server database table. This package was created on the server. then though version control (using TFS source control) I check out the package on my local machine. and when I open the package I get the foll 3 errors.
Error 1 Validation error. Import Account Num from BMGP_BDR: DTS.Pipeline: The component metadata for "component "DataReader Source" (1113)" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
Error 2 Error loading BMAG Download Xref Tables - bmag.dtsx: Microsoft.SqlServer.Dts.Pipeline.ComponentVersionMismatchException: The version of component "DataReader Source" (1113) is not compatible with this version of the DataFlow. [[The version or pipeline version or both for the specified component is higher than the current version. This package was probably created on a new version of DTS or the component than is installed on the current PC.]] at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostCheckAndPerformUpgrade(IDTSManagedComponentWrapper90 wrapper, Int32 lPipelineVersion)
Error 3 Error loading BMAG Download Xref Tables - bmag.dtsx: The component metadata for "component "DataReader Source" (1113)" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
I have a package which reads an Access file from a folder. My connection manager to this file is .NET providers for OledbMicrosoft Jet 4.0 OLE DB Provider.
Package works from my computer. But when I execute it on the server as a SQL Agent job, I get
The component metadata for "component "DataReader Source" (1) could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
I copied the mdb file to a folder on the server which my packages have no problem reading data from.
My packages run under the same domain account as defined in proxies.
In a Data Flow, I have the necessity to use a SSIS variable of type €œObject€? inside Script Component and assign to it the content of 'n' variables of string type. On exiting from the script the variable of type object should contain something like in the following lines: AAAAAAAAAAAAAAAAAAAAAAAAAAAAA BBBBBBBBBBBBBBBBBBBBBBBBBBBBB CCCCCCCCCCCCCCCCCCCCCCCCCCCCC DDDDDDDDDDDDDDDDDDDDDDDDDDDDD €¦€¦€¦€¦€¦€¦€¦. €¦€¦€¦€¦€¦€¦€¦. On exiting from the data flow I will use the variable of type Object in a Script Task, by reading each element in a cyclic fashion. Is there anyone who have experienced something like this? Could anyone provide any example of that? Thanks in advance!
Hi all I'm into a project which uses a lot of views for joining 2 or more tables. Using the MERGE component in SSIS will be a huge effort coz it only has 2 inputs and I gotta SORT the input too. Isnt it possible to have a VIEW like component that joins more than 2 tables and DOESNT need sorting?? (I've thought about creating views in database engine but it breaks my data floe in SSIS and is'nt a practical solution)
I am writing a custom dataflow transformation component and I need to get the name of the preceeding component.
I have been trying to find a way to get a reference to the Package object, MainPipe object or IDTSPath90 object (connecting to the IDTSInput90 of my component) from my component because I think from there I can get to the information I want.
No idea where this bug crept in from. Have been using SSIS for 1.5 years now without hitting this problem.
I had a script component opening an XML document and parsing it using XPATH. I added some code that uses StreamReader / Streamwriter (closing one stream before starting the other). The code works without issue in my C# app.
And it ran without issue 2-3 times in SSIS. Then suddenly after running my package again, the script component says it completes successfully, yet nothing happens. I set a breakpoint on the first line of code - it never hits it. I add a msgbox as the first line of code - and it never displays.
I then close my package / exit out of ssis ... and then re-open it. When i open my script component, all of my code is GONE. All references that I added are gone.
I tried adding the streamreader/writer process to a dll I created from my c# app ... and added the DLL to the package -- same result.
I can reproduce this on 2 different computers.
Anyone experience this problem ? Any idea how to stop it ? Or debug it ?
Here is a slimmed down code sample of what causes the error :
Public Class ScriptMain Public Sub Main() Try Dim xmlDoc As New XmlDocument xmlDoc.Load("c:ulkasync_86281519_20070628045850225_4.xml") MsgBox("xmlLoaded") --this doesn't display once the package starts "acting up" Catch ex As Exception MsgBox(ex.Message) UpdateXML("c:ulkasync_86281519_20070628045850225_4.xml", ex.Message) End Try Dts.TaskResult = Dts.Results.Success End Sub Private Sub UpdateXML(ByVal fileName As String, ByVal message As String) Try Dim invalidChar As String = message.Trim().Substring(message.Trim().IndexOf("0x"), 4) Dim rd As StreamReader = New StreamReader(fileName) Dim xml As String = rd.ReadToEnd() Xml = Xml.Replace(invalidChar, String.Empty) xml = xml.Replace("", String.Empty) xml = xml.Replace("<![CDATA[<![CDATA[", "<![CDATA[") xml = xml.Replace("]]>]]>", "]]>") MsgBox("replaced") rd.Close() Dim wr As StreamWriter = New StreamWriter(fileName) wr.Write(xml) wr.Close() Dim xdoc As XmlDocument = New XmlDocument() xdoc.Load(fileName) Catch ex As Exception UpdateXML(fileName, ex.Message) End Try End Sub End Class
I am using ODBC to connect SQL Server 2000 + SP4 server runnig on Windows 2003 standard edition Server +SP1. But, sporadically my application server connectivity to DB fails and i receive the following error messages
[Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionWrite (WrapperWrite()). [Microsoft][ODBC SQL Server Driver][DBNETLIB]General network error. Check your network documentation.) In D:de.cpp 702 Apr 12 2006 20:34:47 [Microsoft][ODBC SQL Server Driver]Communication link failure) In D:de.cpp 702 Apr 12 2006 20:34:47 20071017 08:23:10 TID (00000ff0) Sev (3) Err (0) Msg (Read failure. General SQL error.
Strange thing is that i receive this error only sporadically, Please Please advice !
When i checked the machine this morning i saw that MS DTC service was stopped and when did start it, it was good for a sec or two then it stopped auto matically i was not sure waht was goin on...
Then i checked the Eventviewer, it said the log file is full i tried out to find ms dtc log reset or increase the size but could not find out..where can i find this.
One more thing what is the purpose of DTC, i know in sql 6.5 we have everything in enterprize manager but i can't see the same either in 7.0 or 2000 is the name changed or is it linked to some other source.
Like linked server , does this depend on MS DTC..how and what is the basic purpose of this..kindly tell me what i should do now...
Is there a way I can perform an update on a table, but ignore thetrigger (or disable the trigger) each time I run a particular updatescript from a DTS package?I would like subsequent DTS steps to use the trigger except for my lastupdate statement. Is this possible?Thanks,Frank*** Sent via Developersdex http://www.developersdex.com ***
In my stored procedure I'm calling a buggy and flaky stored procedurethat comes from a third party. When I run my stored proceure from QA,I'm getting a whole buch of errors raised inside the third party one.Is there any way I could just ignore them, so that if I run my SP fromQA, only errors from my code, if any, show up?TIA
Hi,I'm trying to upload a large number of log entries currently stored astext files into a database table using bcp. For a few rows I get a"right truncation" error and the offending rows are not uploaded to thetable.I don't want to increase the size of the table varchar fields becauseit's only about a dozen out of almost million rows that have thisproblem ... I want to provide an override - i.e. if a row will resultin truncated data, truncate but still bulk copy the offending row. Isthat possible?I couldn't find such an option in the documentation.Any help is greatly appreciated.Thanks,Mudassir Latif
Is there a way to make a SP ignore an error?e.g. I'm looping through each database on a server, checking of a tableexists then selecting a value from that table. Now I have a database putonto the server where the table exists but all column names aredifferent, my SP is not interested in this database so when it errorswith invalid column name I want it to move onto the next databse and notdisplay any error message.
I'm writing a store procedure to accept search strings from user on my site. Currently, this is what I have.
Code Snippet @schoolID int = NULL, @scholarship varchar(250) = NULL, @major varchar(250) = NULL, @requirement varchar(250) = NULL --@debug bit = 0 AS BEGIN -- SET NOCOUNT ON added to prevent extra result sets from -- interfering with SELECT statements. SET NOCOUNT ON; SELECT * FROM [scholarship] WHERE ([sectionID] = @schoolID OR @schoolID IS NULL) AND ([schlrPrefix] LIKE '%' + @scholarship + '%' OR [schlrName] LIKE '%' + @scholarship + '%' OR [schlrSufix] LIKE '%' + @scholarship + '%' OR @scholarship IS NULL ) AND ([Specification] LIKE '%' + @major + '%' OR @major IS NULL ) AND ([reqr1] LIKE '%' + @requirement + '%' OR [reqr2] LIKE '%' + @requirement + '%' OR [reqr3] LIKE '%' + @requirement + '%' OR [reqr4] LIKE '%' + @requirement + '%' OR [reqr5] LIKE '%' + @requirement + '%' OR @requirement IS NULL )
The problem is, somtimes the search doesn't work if there is a space behind or infront of the search string. I wonder if there is away to ignore any spaces and go right into whatever character comes next or after. If so, how do I implement that?
I have a stored procedure that does several steps. During the stored proc, error messages are produced when certain conditions warrant. But I want to continue anyway.... ex. in a loop in the proc...
SET @strSQL = 'Update Table1 SET col1 = ''' + @strVariable + '''' EXEC (@strSQL)
--ERROR created by the exec statement.....
When I schedule this as a job, the first error message makes the job fail. How can I force the proc to run completely, even if an error occurs?
Hi! I'm wondering if there is a way to have the AVG() not to include the zero amount as part of the calculation. I'm looking the field, PurchPrice and RepairCost that are used by the AVG() function...
I am importing data into a SQL table and there is a potential for duplicate records to be coming in. How do I simply ignore the duplicates and add only the records that do not violate the keys?
SELECT expense_id, CAST(expense_id AS char(10)) + ' - ' + CAST(trip_km AS char(5))+ ' - ' + CAST(expense_amount AS char(5)) + ' - ' + charge_centre AS ExpenseDesc
If charge center is null, I need to ignore this field. How can I achieve this? The reason is that if any of the field is null, it will return ExpenseDesc as null.
if there is an error in the trigger then the update to the table does not happen. is there a way to make sql ignore errors in a trigger and still update the table
Hi, I am trying to import data from a Text file into a database Table using SQLserver BCP utility. I am able to do that when I have all new records in my Text file. But I am getting primary key violation error when I am trying to import the record which is already existing in the table. This is correct, but I want my program to ignore these errors and import only those records which are fine. I tried [-m maxerrors] option, but it is not working. My BCP program is getting interrupted at the first error itself, even if I give [-m100] option. my command looks something like this, bcp pub..employee in C:data.txt -b1 -m100 -c -t, -Sdatabase -Uuser -Ppassword
here -b1 is, processing 1 row per batch transaction -m100 is, ignoring first 100 errors
I am looking for best practice when passing a parameter to stored procedure that is not needed. For example, sometime the users will want the list to list only by certain state. Other times the user want all states. How can I make the SP to ignore the where clause if users want all states.
CREATE PROCEDURE usp_Example @State nvarchar(2) AS SELECT FirstName, LastName, State FROM SomeTable WHERE State = @FirstName; GO
Using SQL2000. According to Books Online, the avg aggregrate functionignores null values. ((3+3+3+3+Null)/5) predictably returns Null. Isthere a function to ignore the Null entry, adjust the divisor, andreturn a value of 3? For example:((3+3+3+3)/4) after ignoring Nullentry.If there's more than one null value, then adjust divisor accordingly.For example: ((5+5+5+4+Null+5+5+Null)/8) would be ((5+5+5+4+5+5)/6)after nulls ignored.Thanks for any help or advice.
Hi,I believe my SQL server was configured as Case sensitivity. I have anumber of stored procedures which were moved from a non-Casesensitivity SQL server. Because of the Case sensitivity, I have to doa lot of editing in those stored procedures. Is there a quick way toavoid the editing?Something like ignoring the case in one statement?Thanks in advance, your advice will be greatly appreciated.
I'm using Microsoft SQL Server Management Studio. I've created a view (very basic two field select with a inner join) -- I expect the query to take some time as there are about 1.7 million records in one table and about 3 million in the join table. Problem is, I always get a timeout error when I try to run the query.
I've checked the server settings and "Execution time-out" = 0 (no time-out). Checked this at the server and in Microsoft SQL Server Management Studio. So my question is why am I getting a time-out when I have it set to not time-out?
