In my SQL 7 log, I get the following message at startup - initdata: Warning: Could not set working set size to 519104 KB.
I have actually constrained the memory settings to be a fixed memory size of 250 MB.
While I have not noticed any problems, does anyone know why the warning message?
Can anyone tell me when I would want to configure 'set working set size'
to 1 on an SQL Server 6.5? I realize that this option tells SQL Server
to request an initial physical memory range equal to the memory
configuration option or equal to memory and tempdb in RAM if that option
is activated.
Please let me know when this would be useful to implement.
Thank you!
Toni Eibner
Hi,
Can anyone assist me, whenever SQL server reboots the following message appears in the event log:
initdata: Warning: Could not set working set size to 1558528 KB.
so far I cannot find a way to cure this problem, does anyone know a solution.
Thanks
Hi friends,
I have three servers on two servers I have configured
Server A B C
Total Memory 1024mb 1024 mb 1024 mb
Min Server Memory :200Mb 196mb 196 mb
Max Server Memory 955 mb 980 mb 955 mb
Set working Set size 1 1 1
Priority Boost 1 1 1
All servers using dynamic memory option.
Server A and B are fine but When I reboot or stop and start Sql services on Server C it is recording the following error in NT Application log:
17122: Initdata:Warning:Could not set working set size to 1038848 KB.
Please help me how to overcome this problem.
Thank you very much.
MHUDDIN
Someone asked about this and I was wondering if anyone has any idea.
Thanks in advance.
>>Yesterday in my Windows NT 4.0 Event Viewer I got a message and then I went to the the SQL Server logs and did not find and errors. Microsoft's web site did not have any insite on this issue so I need your help.
>>
>>
>>Category: Kernel
>>17122:
>>initdata: Warning: could not set working size to 259200KB.
>>
>>Please help this seems to be causing some ODBC connection problems to the databases.
Hello,
i am using sql server ce 2.0 for my device application.but this database sometimes gets corrupt,and i am not working with big size datas,if sdf file's size grow up,sdf file's performance gets knock out. for example: work with 50 mb data..what can i do?please somebody help me ?
Hello
Is there anyone who can help me?
I saw the fallowing error message in the SQL SERVER error log.
"initdata: warning: could not set working set size"
Set Working set size to 0(zero)* in my SQL SERVER
What should I do?
Should I Set working set size set to 1(one)?
Thanks in advance...
bim@sifas.com.tr
mikiz@turk.net
Hi,
I wrote this sql function which takes a comma seperated string of numbers, splits the numbers seperately and stores it in a table. I have specified the input parameter type as text instead of varchar, the size of the string can get more than 8000.
But the function is not working properly if the input size is more than 8000. For example if the input string is of length 8005 and this is the input string from 7995 to 8005 - '123,124,125'. It works fine till 123 and after that it throws an error, Syntax error converting the varchar value '124,125' to a column of data type int. Can anyone tell me what is wrong with this. I am using string functions like charindex, substring. I can post the full function if you want.
Thanks.
I get the following warning message logged when starting up SQL:
initdata: Warning: Could not set working set size to 519104 KB.
What it mean ?
I have got 1x400 MHz serevr with 512 MB RAM and MS SQL server parameters are following :
max_memory = min_memory = 250 MB
set working set size = 1.
Thanks for your help.
I am trying to resize a database initial log file from 500M to 2M. I€™m using€?
ALTER DATABASE <DBNAME> MODIFY FILE ( NAME = <DBLOGFILENAME, SIZE = 2 ) "
And I'm getting "MODIFY FILE failed. Specified size is less than current size." I tried going into the database properties and setting the log file to 2M, but it doesn€™t keep the changes.
Any help with this process?
I installed sql 2005 a while back. Then I recently found out my file system was fat32 (I don't understand why the hardware people did this...) and I had to convert to NTFS. Naturally the sql service no longer worked so I uninstalled inorder to reinstall now I can't reinstall it I keep getting this message
native_error=5039, msg=[Microsoft][SQL Native Client][SQL Server]MODIFY FILE failed. Specified size is less than current size.
I'll try to post the full log in a new post.
Hi folks,Can anyone enlighten me here? I'm trying to use a SPROC which, when supplied with an int, looks up the table and returns certain columns from it. I'm using a SqlCommand, here's my codebehind: ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ SqlCommand dataSource = new SqlCommand("retrieveData", new SqlConnection(dbConnString)); dataSource .CommandType = CommandType.StoredProcedure; dataSource .Parameters.AddWithValue("id", poid); dataSource .Parameters.AddWithValue("title", title).Direction = ParameterDirection.Output; dataSource .Parameters.AddWithValue("creator", creator).Direction = ParameterDirection.Output; dataSource .Parameters.AddWithValue("assignee", assignee).Direction = ParameterDirection.Output; etc, etc... And the SPROC:------------------------------------------------------------------------------------------------------------------set ANSI_NULLS ONset QUOTED_IDENTIFIER ONGOALTER PROCEDURE [dbo].[retrieveData] @id int, @title varchar(50) OUTPUT, @creator varchar(50) OUTPUT, @assignee varchar(50) OUTPUT, @contact varchar(50) OUTPUT, @deliveryCost numeric(18,2) OUTPUT, @totalCost numeric(18,2) OUTPUT, @status tinyint OUTPUT, @project smallint OUTPUT, @supplier smallint OUTPUT, @creationDateTime datetime OUTPUT, @amendedDateTime datetime OUTPUT, @locked bit OUTPUT AS /**SET NOCOUNT ON; **/ SELECT [title] AS [@title], [datetime] AS [@creationDateTime], [creator] AS [@creator], [assignee] as [@assignee], [supplier] as [@supplier], [contact] AS [@contact], [delivery_cost] AS [@deliveryCost], [total_cost] AS [@totalCost], [amended_timestamp] AS [@amendedDateTime], [locked] AS [@locked] FROM purchase_orders WHERE [id] = @id; ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ The id being passed in is definately not null, and is set to a value of an item I know exists. The resulting error is:
Exception Details: System.InvalidOperationException: String[1]: the Size property has an invalid size of 0.Line 63: retrievePODetails.Connection.Open();Line 64: retrievePODetails.ExecuteNonQuery();[InvalidOperationException: String[1]: the Size property has an invalid size of 0.] System.Data.SqlClient.SqlParameter.Validate(Int32 index) +717091... ... Can anyone see anything I'm missing? Thanks,Ally
Using C#, SQL Server 2005, ASP.NET 2, in a web app, I've tried removing the size from parameters of type NCHAR, NVARCHAR, and VARCHAR. I'd rather just send a string and let the size of the parameter in the SP truncate any extra chars if need be. I began getting the error below, and eventually realized it happened only with output parameters, as in the code snippet below.String[3]: the Size property has an invalid size of 0. par = new SqlParameter("@BusinessEntity", SqlDbType.NVarChar); par.Direction = ParameterDirection.Output; cmd.Parameters.Add(par); cmd.ExecuteNonQuery();What's the logic behind this? Is there any way around it other than either finding out what the size should be, or assigning a size larger than would ever be needed? ThanksMike Thomas
View 6 Replies View RelatedI have one db test with one .mdf and .ldf file...mdf file size is 100mb and for some reson i removed all the tablesfrom that .mdf file and transfer it into new secondary file so all thetables moved into secondary file now i want to reduce the first .mdffile from 100 mb to 50mb is that possible,it's showing 90mb is free.Please reply
View 1 Replies View RelatedI want to know encrypted data's size for designing database field size.
For example, cardnumber varchar(20) Encrypted by Triple_DES and PassPhrase, How match size does need to encrypted data store field.
I think the size does not depend to PassPhrase char length.
Regards,
Yoshihiro Kawabata
hi
I had a view in which I did something like this
isnull(fld,val) as 'alias'
when I assign a value to this in the client (vb 6.0) it works ok in sql2000 but fails in 2005.
When I change the query to fld as 'alias' then it works ok in sql 2005 .
why ?? I still have sql 2000 (8.0) compatability.
Also some queries which are pretty badly written run on sql 2000 but dont run at all in sql 2005 ???
any clues or answers ?? it is some configuration issue ?
Thanks in advance.
I am getting error to run stored procedure using executenonquery method. The Stored Procedure is having OUTPUT parameter.
ExecuteNonQuery statement is called using SqlHelper.
Error : String[18]: the Size property has an invalid size of 0
Just wanted to know what is a general rule of thumb when determining log file space against a database's data file.We allow our data file for our database to grow 10%, unlimited. We do not allow our log file to autogrow due to a specific and poorly written process (which we are in a three month process of remove) that can balloon the log file size.Should it be 10% of the Data file, i.e. if the Date file size is 800MB the log file should be 8MB?I realize there are a myraid of factors that go against file size but a general starting point would be nice.ThanksJeff--Message posted via http://www.sqlmonster.com
View 4 Replies View RelatedThe Tabular model is showing 19 GB on disk, but it is acquiring around 40 GB in memory.
View 3 Replies View RelatedI am writing a pgm that attaches to a SQL Server database. I have an Add stored procedure and an Update stored procedure. The two are almost identical, except for a couple parameters. However, the Add function works and the Update does not. Can anyone see why? I can't seem to find what the problem is...
This was my test:
Dim cmd As New SqlCommand("pContact_Update", cn)
'Dim cmd As New SqlCommand("pContact_Add", cn)
Try
cmd.CommandType = CommandType.StoredProcedure
cmd.Parameters.Add("@UserId", SqlDbType.VarChar).Value = UserId
cmd.Parameters.Add("@FirstName", SqlDbType.VarChar).Value = TextBox1.Text
[...etc more parameters...]
cmd.Parameters.Add("@Id", SqlDbType.VarChar).Value = ContactId
cn.Open()
cmd.ExecuteNonQuery()
Label1.Text = "done"
cn.Close()
Catch ex As Exception
Label1.Text = ex.Message
End Try
When I use the Add procedure, a record is added correctly and I receive the "done" message. When I use the Update procedure, the record is not updated, but I still receive the "done" message.
I have looked at the stored procedures and the syntax is correct according to SQL Server.
Please I would appreciate any advice...
Hi,
An MSSQL DB running SAP indicates a smaller DB size (MMC & SAP) than the actual physical size. The difference is about 8 GB.
A lot of records were deleted before this. Did they remain in the DB as NULL values or something ?
Does anyone know what the reason for this could be ? And how to clean this up ?
Thanks in advance,
Paul
Hi,
i use this script that show me the size of each table and do the sum of all the table size.
SELECT
X.[name],
REPLACE(CONVERT(varchar, CONVERT(money, X.[rows]), 1), '.00', '') AS [rows],
REPLACE(CONVERT(varchar, CONVERT(money, X.[reserved]), 1), '.00', '') AS [reserved],
REPLACE(CONVERT(varchar, CONVERT(money, X.[data]), 1), '.00', '') AS [data],
REPLACE(CONVERT(varchar, CONVERT(money, X.[index_size]), 1), '.00', '') AS [index_size],
REPLACE(CONVERT(varchar, CONVERT(money, X.[unused]), 1), '.00', '') AS [unused]
FROM
(SELECT
CAST(object_name(id) AS varchar(50)) AS [name],
SUM(CASE WHEN indid < 2 THEN CONVERT(bigint, [rows]) END) AS [rows],
SUM(CONVERT(bigint, reserved)) * 8 AS reserved,
SUM(CONVERT(bigint, dpages)) * 8 AS data,
SUM(CONVERT(bigint, used) - CONVERT(bigint, dpages)) * 8 AS index_size,
SUM(CONVERT(bigint, reserved) - CONVERT(bigint, used)) * 8 AS unused
FROM sysindexes WITH (NOLOCK)
WHERE sysindexes.indid IN (0, 1, 255)
AND sysindexes.id > 100
AND object_name(sysindexes.id) <> 'dtproperties'
GROUP BY sysindexes.id WITH ROLLUP) AS X
ORDER BY X.[name]
the problem is that the sum of all tables is not the same size when i make a full database backup.
example of this is when i run this query against my database i see a sum of 111,899 KB that they are 111MB,but when
i do full backup to that database the size of this full backup is 1.5GB,why is that and where this size come from?
THX
Here are my scenarios:
We have an application with replicated environment setup on sql server 2012 . Users will have a replica on their machines and they will replicate to the master database. It has 3 subscriptions subscribed to the publications on the master db.
1) We set up a replica(which uses sql server 2012) on a machine with no sql server on it. After the initial synchronization(used replmerge tool) the mdf file has grown to 33gigs and ldf has grown to 41 gigs. I went to sql server management studion . Right click and checked the properties of the local database. over all size is around 84 gb with little empty free space available.
2) We set up a replica(which uses sql server 2012) on a machine with sql server 2008 on it. After the initial synchronization(used replmerge tool) the mdf file has grown to 49 gigs and ldf has grown to 41 gigs. I went to sql server management studio , Right click and checked the properties of the local database. over all size is around 90 gb with 16 gb free space available.
3) We set up a replica(which uses sql server 2012) on a machine with sql server 2012 on it. We have dropped the local database and recreated the local db and did the initial synchronization using replmerge tool. The mdf file has grown to 49 gigs and ldf has grown to 41 gigs. I went to sql server management studio , Right click and checked the properties of the local database. over all size is around 90 gb with 16 gb free space available.
Why it is allocating the space differently? This is effecting our initial replica set up times.
It is possible to find table size and in that table each row size.
View 4 Replies View RelatedHi, I have a problem importing data from SQL Server 2000 'text' columns to SQL Server 2005 nvarchar(max) columns. I get the following error when encountering a transfer of any column that matches the above.
The error is copied below,
Any help on this greatly appreciated...
ERROR : errorCode=-1071636471 description=An OLE DB error has occurred. Error code: 0x80004005.An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Unicode data is odd byte size for column 3. Should be even byte size.". helpFile=dtsmsg.rll helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC} (Microsoft.SqlServer.DtsTransferProvider)
Many thanks
Hi,
I am using
exec sp_helpdb
go
dbcc sqlperf(logspace) for
getting database size and log size. Is this gives the correct
database size and log size or Is there any other way to get the logsize and database size by means of query analyzer.
Thanks in Advance.
Seenu. S
I have a SQL Server database that is showing 2853.44 mb in size but when Iexport the data into MS Access the size is less than 1 mb. Can anyone tellme how to reduce the size of my SQL Server database so that it's less than15 mb?Thanks in advance! Rob
View 5 Replies View RelatedWhy is it that lately our full backup (.bak) file size is more than 2x the size of the actual database file size (.mdb)?
View 9 Replies View RelatedI have a log file that is approximately 50 GIG. I backed up just the log and the file size of the .bak is 192 GIG . Why is this? Shouldn't it be closer to the 50 GIG.
Normally I wouldn't let log grow this much. But we are in process of getting new server up and running and don't have backups going yet. They are working on getting that up and running this week.
So I did a log backup to give me back some log space for now but was concerned when I saw the size of the .bak file.
When I view media contents of the backup device it shows one tranaction log back up and size of 192 GIG.
What is up with this. I know in SQL 2000 the log backup files where never this big. they were about the size of the log itself.
Any ideas?
Stacy
Hi!
I'm using SQL Server 2000!
How to know then Data files size and Log files size by Store Procedures or Sql query?
Thanks!
Original suggestion for my problem was - Select * from TableA where ID not in ( Select ID from TableB)
When I run the query below using the IN operator I get 227 records returned but when I use NOT IN I get zero records when I expect well over 10,000. What am I missing?
using SQL 2000 server
SELECT LinksInfo.L_ID, LinksInfo.C_ID, Companies.C_CompanyName, Companies.C_Email, Companies.C_CompanyEmailFROM LinksInfo INNER JOIN Companies ON LinksInfo.C_ID = Companies.C_IDWHERE (LinksInfo.L_ID IN (SELECT ZL_ID FROM Location_Zip))
ZL_ID is not a primary key in Location_Zip
Hello again,
I think im missing something here, i just cant find out what it is.
I have a temp table:
CREATE TABLE #tempSearch(tempID BIGINT IDENTITY(1,1) PRIMARY KEY,username NVARCHAR(20) COLLATE Finnish_Swedish_CI_AS,lastlogin DATETIME,signupdate DATETIME)
Now i am trying to retrieve some data for each user that is inside this tempSearch list and have an id over xxx (xxx = the value of the parameter @first_id):
SELECT @sql = 'SELECT profile_publicinfo.username, profile_publicinfo.gender, profile_publicinfo.signupdate, profile_profilephoto.imageurl, profile_profilephoto.alttext, settings_username.color, profile_publicinfo.lastloginFROM #tempSearch INNER JOIN dbo.profile_publicinfo ON profile_publicinfo.username = #tempSearch.usernameINNER JOIN dbo.settings_privateinfo ON settings_privateinfo.username = profile_publicinfo.usernameFULL OUTER JOIN dbo.profile_coolfacts ON profile_coolfacts.username = profile_publicinfo.username FULL OUTER JOIN dbo.profile_profilephoto ON profile_profilephoto.username = profile_publicinfo.usernameFULL OUTER JOIN dbo.settings_username ON settings_username.username = profile_publicinfo.usernameWHERE (profile_publicinfo.username IN (SELECT username FROM #tempSearch))AND #tempSearch.tempID >= @first_id'
SELECT @paramlist = '@first_id int'EXEC sp_executesql @sql, @paramlist, @first_id
I need to get the tempID from the tempSearch table in order to compare it with @first_id
When i run this i get the same username repeated like 30 times then it moves over to the next, when i debug the #tempSearch it looks fine, just the users that are suppose to be there.
Hi
I think I have installed MSDE sucessfully. The new servie is running, but how can I test ifit is working? Can I place my files anywhere on the system?
All help appreciated