Count Number Of Rows Inserted
Jan 23, 2015Using insert stored procedure ,How to count the number of rows inserted.
View 1 RepliesUsing insert stored procedure ,How to count the number of rows inserted.
View 1 RepliesHi all
i using lookup error output to insert rows into table
Rows count rows has been inserted on the table 59,123,019 mill
table rows count 6,878,110 mill ............................
any ideas
I need to count how many rows are inserted and then how many updated from a table then put that result in a new table.
Lisa Jefferson
hey, how would i count the number of rows, with out using a loop??
thanks, Justin
Hello, DeanTry this:select distinct c1, c2 into #tmp_1 from t1select count(*) as cnt from #tmp_1drop table #tmp_1With best regards.
View 1 Replies View RelatedMy understanding from a previous thread was that ExecuteNonQuery() could be used to display the number of rows returned.
Does this also work when calling stored procedures and passing parameters?
I have code (shown) that perfectly calls and returns Distinct models downloaded by Country. Yet the rowCount variable displays a -1.
What should I do?Dim myCommand As New SqlClient.SqlCommand
myCommand.CommandText = "ap_Select_ModelRequests_RequestDateTime"
myCommand.CommandType = CommandType.StoredProcedure
myCommand.Parameters.AddWithValue("@selectDate", dateEntered)
myCommand.Parameters.AddWithValue("@selectCountry", CInt(selectCountry))
myCommand.Connection = con
con.Open()
Dim rowCount As Integer = myCommand.ExecuteNonQuery()
numberParts.Text = rowCount.ToString
con.Close() Thank you.
hello,
i have a stored procedure SELECT CommentID, UserName, CommentingDate
FROM Comm
WHERE PictureID = @PictureID
ORDER BY CommentingDate DESC
witch shows me the users who commented a Picture with PictureID = x
I need to add two rows at that stored procedure, one to show the number of total comments at that picutre (like counting the number of rows returned) and the second to show count the DISTINCT users who commented that picture
I tryied with COUNT but i have to use GROUP BY and i don't think this is good...
I hope you understand... please help me,
thanks
This is my SQL :
Select p.patientid,p.patientname,p.patientIc,pvi.DateOfAdmission,pvi.visitid,pvi.ward,pvi.bedno,pf.status,pvi.SurgeonName,(f.Title + ' ( Ver ' + (CAST(f.Version as Char(10))) + ')') as Title FROM patient p, patientvarianceinfo pvi,patientForm pf,Form f where (p.PatientName LIKE '%" & Name & "%' or p.PatientIc LIKE '%" & ic & "%' or pvi.Ward LIKE '%" & ward & "%' or pvi.Bedno LIKE '%" & bed & "%') and (p.patientid = pvi.patientid) and (p.patientid = pf.patientid) and (pvi.patientid = pf.patientid) and (pf.FormID = f.FormID)and p.patientid in (select patientid from patientform pf)how do i get the number of rows?
Hi,Should be quite simple but can someone please tell me the best way tocount the number of rows in an UNION ALL statement.I tried using @@ROWCOUNT but that doesn't seem to contain the correctnumber.Also, I assume that running the query again but just returning count(*)instead of the data is horribly inefficient (plus the code is thenbloated.)?Thanks,Mark
View 1 Replies View Relatedis it possible to use the window functions to count the number of rows in the previous 24hours from the current row.
I have a table of events like:
User, TimeStamp, etc...
I want to identify the row which is the event number 50 in the past 24 hours.
does the window functions can do this? and how?
the ROW PRECEDING etc... appear to not have enough feature to support time related function.
Stream-insight is able to create this type of query, but I have to do it directly in SQL.
Hiwhen inserting records into a table one of the fields is a date field. I am using the GETDATE() function to insert the date as the record is being inserted.when i retrieve an entire record from the table i want to be able to select this date, but also to get the number of days it has been since that record was inserted.eg: 3 daysif the record was inserted less than one day ago (<24 hrs ago) i would like it to return the number of hours. e.g. 22 hrsi dont want hours to be displayed if the days is >= 1.please can anyone guide me with this?thanks!
View 7 Replies View RelatedI need to add the row number or record number to the 'inserted' and 'deleted' tables in a trigger.
Among other things, I have tried-
SELECT 1 as rowId, i.* INTO #ins FROM inserted i
if @@ROWCOUNT > 1 --if multiple rows, set row number
begin
SELECT @pkWhere = coalesce(@pkWhere + ' and ', ' where ') + PKF.colName + ' <= i.' + PKF.colName FROM #primaryKeyFields PKF
set @strSQL = 'update #ins set rowId = (Select Count(*) From #ins i' + @pkWhere + ')'
exec (@strSql)
end
-the above sets rowId for every record to the total instead of sequential. Keep in mind that this code is used to create a trigger for any table, hence I cannot specify any column names literally.
This SHOULD be simple... right?
Initially I had designed ETL using Dataflow task in SSIS , No I have converted into Store procedure using merge statement.
I am getting new records inserted, source records and deleted row count when I am running sqp manually.
In ssis simple I have used the rowcount transformation to capture the records.
below variable i have declared in SSIS Package.
User::etlArchiveLogId
User::sourcerecords
User::newrecords
User::changerecord
now I am incremental loading using Stored procedure below is the sp which is executing when task success and logs the records.
ALTER PROCEDURE [dbo].[usp_LogArchiveBBxEndTime]
@EtlArchiveLog_Id int,
@RowsSource int,
@RowsNew int,
@RowsChanged int,
@Sucessful bit,
@Description varchar(500)
[code]....
Now I want to log the variable records which I have declared in my stored procedure .how can I log it in table?
I am run a stored procedure using Execute SQL task in, I want to log information of number of record inserted update in my table. I want to enable SSIS logging after from where I get information number of record inserted update.
I am using SQL server 2008R2 standard edition.
Summary: Maximum number of records per second that can be inserted intoSQLServer 2000.I am trying to insert hundreds (preferably even thousands) of recordsper second in to SQLServer table (see below) but I am getting thefollowing error in the Windows Event Viewer Application log file:"Insufficent Memory......"And very few records were inserted and no errors where sent back viathe JDBC.By removing the indexes on the table we have stopped getting the errormessage and have managed to load the table at 300 records per second.However I have couple of questions:1) Are the indexes definitely to blame for this error and is thereanyway of getting around this problem i.e. keeping the indexes in placewhen inserting?2) How should I configure SQLServer to maximise the speed ofinserts?3) What is the limiting factor for inserting into SQLServer?4) Does anyone know of any metrics for inserting records? At wantpoint should we consider load balancing across DBs.I currently populate 1.6 million records into this table. Once againthanks for the help!!CREATE TABLE [result] ([id] numeric(20,0) NOT NULL,[iid] numeric(20,0) NOT NULL,[sid] numeric(20,0) NOT NULL,[pn] varchar(30) NOT NULL,[tid] numeric(20,0) NOT NULL,[stid] numeric(6,0) NOT NULL,[cid] numeric(20,0) NOT NULL,[start] datetime NOT NULL,[ec] numeric(5,0) NOT NULL,)GOCREATE INDEX [ix_resultstart]ON [dbo].[result]([start])GOCREATE INDEX [indx_result_1]ON [dbo].[result]([id], [sid], [start], [ec])GOCREATE INDEX [indx_result_3]ON [dbo].[result]([id], [sid], [stid], [start])GOCREATE INDEX [indx_result_2]ON [dbo].[result]([id], [sid], [start])GO
View 5 Replies View Related
I have a table in which i have to delete last n inserted rows, how should i approach this , Sql server does not provide any ROWGUID BASED ON TIMESATAMP
i dnt think Rank() wil work either
Any suggestions?
Hi
I want to enter rows into a table having more number of columns
For example : I have one employee table having columns (name ,address,salary etc )
then, how can i enter 100 employees data at a time ?
Suppose i am having my data in .txt file (or ) in .xls
( SQL Server 2005)
There is a stored procedure that inserts a row into 'Vendors' table. Is it possible that two different calls to this sp happen at the same time and as a result, each sp inserts into the table its row at exactly the same time?
View 1 Replies View RelatedWhy does this code tell me that I inserted 2 rows when I really only inserted one? I am using SQL server 2005 Express. I can open up the table and there is only one record in it. Dim InsertSQL As String = "INSERT INTO dbCG_Disposition ( BouleID, UserName, CG_PFLocation ) VALUES ( @BouleID, @UserName, @CG_PFLocation )"Dim Status As Label = lblStatus
Dim ConnectionString As String = WebConfigurationManager.ConnectionStrings("HTALNBulk").ConnectionString
Dim con As New SqlConnection(ConnectionString)
Dim cmd As New SqlCommand(InsertSQL, con)
cmd.Parameters.AddWithValue("BouleID", BouleID)
cmd.Parameters.AddWithValue("UserName", UserID)
cmd.Parameters.AddWithValue("CG_PFLocation", CG_PFLocation)
Dim added As Integer = 0
Try
con.Open()
added = cmd.ExecuteNonQuery()
Status.Text &= added.ToString() & " records inserted into CG Process Flow Inventory, Located in Boule_Storage."
Catch ex As Exception
Status.Text &= "Error adding to inventory. "
Status.Text &= ex.Message.ToString()
Finally
con.Close()
End Try Anyone have any ideas? Thanks
Rajesh writes "Hi
I have a table. I need to see the newly inserted row on the day. i.e. newly inserted data alone. I dont have any date field in the table."
HI, I am wondering if it is possible to retreive this information without using row count transform. Can I get the # of rows inserted/updated or deleted by destination from the log?
Thank you,
Ccote
Hi,
I am trying to create a SSIS package, which will extract data from a SQL server view and populate the data in our local SQL server database tables. My objective is to get the data from the view such that only inserted and updated rows are fetched from the view.
Note: the view does not expose any updated date type of column thru which I can check. So I guess I have to compare each and every field with my destination table row's fields.
I would appreciate any suggestions on how to approach the problem.
Thanks in advance.
Hi!
I want to merge in a Datawarehouse, data of "source databases"
I need to insert on destination inserted rows a default value, acording to the datasource of the rows.
Something like in the field <SOURCE> fill on correspondent ROW the value <DATASOURCE1>
the row data is filled with default DATASOURCE value.
in nowdays i can extract and load the data of sources but i know how i can do this inserts,
thx.
Hello All,
Doe anyone know if any limitations with SQL Server Express may be causing this?
I have an application (a web service hosted on my local PC) that parses an InfoPath form and submits the data to a database (SQL Server Express). The problem I'm have is that new records are not always inserted into the database when I submit. There is an autoincrement ID field and I observed that every other record was successfully inserted (a day ago) and today I observed that the records were inserted intermittently. However, when I run the same application on a laptop, the records are inserted each time.
I posted the associated code on the Data Access forum but it occurred to me that it may be because of the nature of SQL Server Express.Any suggestions would be much appreciated. Thanks!
hi
I want to do a "bulk" insert and then get the id (primary key) of the inseret rows:
insert into table1 select * from table2
If I get the value of the @@identity, I always get the last inserted record.
Any idea how to get the ids of all inserted values?
Thx
Olivier
I have a TableA where data get inserted from Excel(IMPORT/EXPORT wizard)
TableA;
ID(identity) Date (NOT NULL Defaulyt Getdate() )
Name Phone
1 2014-06-17 17:28:21.190
Nick 12345678910
2 2014-05-17 17:28:21.190
Stan 00045678910
3 2015-08-17 17:28:21.190
Kim 11111678910
4 2015-08-17 17:28:21.190
Tom NUll
3,4 are the rows i have inserted now , you can see by date, likewise i have 100,000 rows(old and new combination) and now the data from excel to TableA can be imported/exported daily , hourly, weekly basis.
Now i want to find out only the rows which are imported to tableA today, or hours back, or yesterday .....
the reason is ,
Step1:get data from excel and import to tableA( this is a manual Step) and i know when the data is inserted with exact date and time.
Step2: get newly inserted rows from TableA and pass them as Parameters in Stored Procedure.( i may run step 2 after 1 hour, or after 1 day or after 1 week ,but i want only rows that are inserted )
I tried with using where Datecreated, but did work.
I have a table that sometimes has modifications to column(s) comprising the primary key [usually "end_date"]. I need to audit changes on this table, and naturally, turned to after triggers.
The problem is that for updates, when the primary key composition changes, I'm not able to relate/join using the primary key - obviously, it no longer matches across INSERTED and DELETED. Now, for a single row update, it's easy to check for updates on PK columns and then deduce what changes were made...
So the real question is: are rows in INSERTED and DELETED always in matching order (1st row in INSERTED corresponds to the 1st row in DELETED...)?
I don't want to put a surrogate key (GUID nor IDENTITY) on the base table if at all possible. INSERT... SELECT from the inserted/deleted tables into a temp table with identity column is fine, and is what I'm currently doing; I would like MVP or product engineer level confirmation that my ordering assumption is correct.
Testing using an identity surrogate key on base table, and selecting from the Ins/del tables, and the temp tables without an order by clause seems to always return in proper order (proper for my purposes). I've tested under SQL 2005 RTM, SP1, SP2, and SP2 "3152".
FYI, I've lost the debate that such auditing is better handled by the application, not the database server...
Aside: why doesn't the ROW_NUMBER() function allow an empty OVER( ORDER BY() ) clause? Will SQL ever expose an internal row_id, at least in the pseudo tables, so we can work around this situation?
Thanks
Mike
I create a Trigger that allows to create news row on other table.
ALTER TRIGGER [dbo].[TI_Creation_Contact_dansSLX]
ON [dbo].[_IMPORT_FILES_CONTACTS]
AFTER INSERT
AS
[code]...
But if I create an INSERT with 50 rows.. My table CONTACT and ADDRESS possess just one line.I try to create a Cursor.. but I had 50 lines with an AdressID and a ContactID differently, but an Account and an AccountId egual on my CONTACT table :
C001 - AD001 - AC001 - ACCOUNT 001
C002 - AD002 - AC001 - ACCOUNT 001
C003 - AD003 - AC001 - ACCOUNT 001
C004 - AD004 - AC001 - ACCOUNT 001
C005 - AD005 - AC001 - ACCOUNT 001
I search a means to have 50 lines differently on my CONTACT table.
C001 - AD001 - AC001 - ACCOUNT 001
C002 - AD002 - AC002 - ACCOUNT 002
C003 - AD003 - AC003 - ACCOUNT 003
C004 - AD004 - AC004 - ACCOUNT 004
C005 - AD005 - AC005 - ACCOUNT 005
In my ETL job I would like to truncate stg table but before truncating stging table, I want to make sure that all the records are inserted in the data model. The sample is as below
create table #stg (
CreateID int,
Name nvarchar(10)
)
insert into #stg
select 1, 'a' union all
select 2, 'b' union all
[Code] ....
How can I check among these tables and make sure that all values are loaded into the data model and the staging table can be truncated.
I would like to perform autodeletion operation from my table using stored procedure....
Here is my table structure:
Emp.id | emp_name | dept | desig | time_out | date | emp_sign |
if the user inserts new employee record that record should delete automatically from original after
30 minutes..I don't want to keep that newly inserted record after
30 minutes...I don't know how to achieve this...
i just want one row instead of multiple rows results.
declare @name varchar(30)
declare @count int
declare @a int
set @name = 'dennis dennis'
set @count = 0
set @a = 1
while(@count < len(@name))
begin
select count(substring(@name, @a, 1)), substring(@name, @a, 1)
where substring(@name, @a, 1) = 'd'
select @count = @count +1
select @a = @a+1
end
hi
can anyone tell me how to count number of records(rows) in a table without using "COUNT" function.for practise iam trying to implement it through queries.
Using linq what would be the most efficient method of counting the number of users in the users table?
View 2 Replies View Related