I need to count the records in a table with a datetime field equal to system datetime. It looks like it is trying to match time also since time is in field too. I just want to match date only. My sql is below. Does anyone have some suggestions on how to handle this?
Date from code
DateTime todaydt = DateTime.Now;
Table Data format
[cal_str_tm] [datetime] not null,
Data in cal_str_tm field - 3/27/2008 9:43:16 PM
Thanks,
Ron
ALTER PROCEDURE SP_DpCount
(
@todaydt datetime
)
AS
SELECT @total = COUNT(cal_int_id)
from dpcalldtl
where (cal_callstat != 'COMPLETED' and cal_str_tm = @todaydt)
I use a redirect row method for error of OLE DB Destination For sqlServer2005.
For some resone even though only 1 record has error and should be redirect, all the record in the current batch (I think depending on the "maximum insert commit size") are redirect. the only way for me to get the exact bad record is to set the above parameter to 1, but then it takes hours to run the package.
also I always get the same error in the errorCode column - " -1071607685"
I have a query to run a report where the results has a column named “Due Date” which holds a date value based on the project submission date.Now, I need to add 4 columns named, “45 Days Expectant”, “30 Days Overdue”, “60 Days Overdue” and “90 Days Overdue”.I need to do a calculation based on the “Due Date” and “System (I mean default computer date) Date” that if “System Date” is 45 days+ to “Due Date” than put “Yes” in “45 Days Expectant” row.
Also, if “Due Date” is less than or equal to system date by 30 days, put “Yes” in “30 Days Overdue” and same for the 60 and 90 days.how to write this Case Statement? I have some answers how to do it in SSRS (Report Designer) but I want to get the results using T-SQl.
Does anyone know how to get the row count of a user table by using the system tables. There is no guarantee that these user tables will have any indexes - so I can not use the sysindexes table to count the rows in a clustered index.
Need to find a way to do this. I have two tables, One with codes i.e. S,R,T and other with transactions looks like this:
Transaction table Emp Trans Tot... X55677 S 8 X55677 R 2 C22887 S 4 C22887 T 3 F66889 S 9 F66889 R 4 F66889 T 3
Code table S R T
Not sure if the code table even helps. What I want to do is show all three transactions for each employee even if they don't have any (would be zero) like so...
Emp Trans Tot... X55677 S 8 X55677 R 2 X55677 T 0 C22887 S 4 C22887 T 3 C22887 R 0 F66889 S 9 F66889 R 4 F66889 T 3
How can I get to this. I'm sure there must be a solution already posted for something like this but I'm not sure what to search for.
I'm currently using the SQL to find records older than todays date in the SSD_SED field. I'm having to update the date manually each day. Is there a way I can automate this?
l've written a cursor to koop through a table and then insert the last 100 records into a table.Reason why l want the last 100 records is to monitor and log the last 100 trans avery hr or so.
-- Declare the variables to store the values returned by FETCH. SET ROWCOUNT 100 DECLARE @customer_No char(15), @loan_No char(12), @date_Issued datetime , @maturity_Date datetime , @status int
DECLARE loan_cursor CURSOR FOR SELECT customer_No, loan_No, date_Issued, maturity_Date, status
FROM loan
OPEN loan_cursor
-- Perform the first fetch and store the values in variables.
FETCH NEXT FROM loan_cursor INTO @customer_No, @loan_No, @date_Issued , @maturity_Date, @status,
-- Check @@FETCH_STATUS to see if there are any more rows to fetch.
WHILE @@FETCH_STATUS = 0 BEGIN
-- This is executed as long as the previous fetch succeeds. FETCH NEXT FROM loan_cursor INTO @customer_No , @loan_No , @date_Issued , @maturity_Date , @status END
CLOSE loan_cursor
DEALLOCATE loan_cursor;
insert into Loan1 (customer_No, loan_No, date_Issued , maturity_Date , status )
select @customer_No, @loan_No, @date_Issued, @maturity_Date, @status FROM loan ORDER BY date_Issued desc;
if l want to commit the transactions after every thousand how would l build it into the script?
Begin Transaction
Select a.AccountNo, a.TransactionNo, a.TransactionAmount, a.TransactionDate Into dbo.test1
From Trans_May_14Aug2002 a,Reds_JuL_Trans_08Jul2002 b
Where ltrim(rtrim(left(a.AccountNo,20)))=ltrim(rtrim(lef t(b.AccountNo,20))) AND ltrim(rtrim(left(a.TransactionNo,20)))=ltrim(rtrim (left(b.TransactionNo,20))) AND a.TransactionAmount=b.TransactionAmount AND a.TransactionDate =b.TransactionDate AND ltrim(rtrim(left(a.Product,20))) IN ('PR060','PR061','PR091', 'PR096','PR111','PR121', 'PR122')
AND ltrim(rtrim(left(a.Transactiontype,20))) IN ('TR001','TR003','TR011', 'TR013','TR027','TR028', 'TR042','TR043','TR044', 'TR045','TR998','TR999')
AND ltrim(rtrim(left(a.journaltype,20))) NOT IN ('JT000','JT720','JT721', 'JT722','JT723','JT725', 'JT726','JT729','JT730', 'JT737','JT738','JT739', 'JT740','JT743','JT746', 'JT751')
OR ltrim(rtrim(left(a.JournalType,20))) IS NULL
AND a.TransactionDate > '2002-04-30'AND b.transactionDate < '2002-07-01'
I'm trying to export around 115,000 rows from ms sql 2000 into Excel 2000, using the manual process. I just need this one time dump.
I am able to successfully export around +- 65,000 rows, but the operation fails after that.
I need to be able to get all the rows out, so using TOP obviously doesn't work.
Is there some "version" or modified way to use TOP to get...say, rows 65,000 to 90,000 then 90,001 to 115,000 ?
This would'nt be an issue if the db I'm working with was MySQL...I'd just use the LIMIT function and pull out 3 different chucks. Is there anything similar to LIMIT...or something converse to TOP in MS SQL? Or perhaps another way to dump the table then export it all (or in portions) into Excel?
Hellois there a variable that is available to me that contains the numberof rows contained in a dataset return from a database call? have a class that runs a stored proc and returns a dataset/resultsetlooking to simply assign an integer this value if it is possible i'm using (learning) vb.net and sql server thanks in advance
Hi, I'm using SQL Server 7.0. I have a table which has had some records double loaded into it and some triple loaded. I need to delete all instances of a record except for 1. The records are identical with no unique identifier. Here is what I'm talking about.
Currently in the table is:
ID DATE STATUS 1 07/07/2000 D 1 07/07/2000 D 1 07/07/2000 D 2 07/07/2000 A 2 07/07/2000 A
Help! Surely this has happened to others before me. A new customer wants to send updates in a fixed-width txt file in which master and detail rows alternate.
How do you do this?
Do you: 1) Painfully muck around with 100,000 rows in the .txt file first--split it into 2 files, one for master records and one for detail records and then process? If so, what do you use? I'd probably hack at it with a VB Script module in a DTS package.
or
2) Is there a way to feed it into 2 tables where rows starting with x go to one table and rows starting with y go to another?
The plan was to use a fast and dirty DTS package to shove this stuff into a table (probably 2 but we might just toss the stuff we don't need and put in in one) but I'd like some advice on how to proceed.
I would like to return the nearest date of Table B in my table like for
ID W001 in table B should return ID A002 CreatedDatetime: 2014-06-03 20:05:48.000 ID W002 in table B should return ID A004 CreatedDatetime: 2014-06-04 01:05:48.000
SQL 2000I have a table with 5,100,000 rows.The table has three indices.The PK is a clustered index and has 5,000,000 rows - no otherconstraints.The second index has a unique constraint and has 4,950,000 rows.The third index has no constraints and has 4,950,000 rows.Why the row count difference ?Thanks,Me.
iam new to SQL i mostly do select on DB but now iam asked to do this...need Help I have a task to calculate the cost of a lead depending on conditions Condition: The leads form PhoneLeads channel (of many channels) First 30 records per day, type A will cost 20$. From 31st record its 50% off First 30 records per day, type B will cost 10$. From the 31st record 50% off Its straight and simple if the count is less than 30 on a day but how to change the cost from the 31st lead….How do I do this as an update to the table. Initially the cost is null for all
Sample output data: ChannelTypedatecost PhoneLeadsA2007-01-17 00:00:0020 PhoneLeadsB2007-01-17 00:00:0010 PhoneLeadsB2007-01-17 00:00:0010 PhoneLeadsB2007-01-17 00:00:0010 PhoneLeadsA2007-01-17 00:00:0020 …..….. …..….. After the 30th lead on the same day the cost should be 50% discounted PhoneLeadsA2007-01-17 00:00:0010 PhoneLeadsA2007-01-17 00:00:0010 PhoneLeadsB2007-01-17 00:00:005 PhoneLeadsA2007-01-17 00:00:0010 PhoneLeadsA2007-01-17 00:00:0010 PhoneLeadsB2007-01-17 00:00:005 PhoneLeadsB2007-01-17 00:00:005
Hi all, i am prity new to sql and am just learning (that hard way)
I have this code and i am trying to get out of it: a date with the number of calles that have been taken on that date between 2 dates.
SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED
DECLARE @DisplayFrom as DATETIME DECLARE @DisplayTo as DATETIME DECLARE @FromDate as DATETIME DECLARE @ToDate as DATETIME
SET @DisplayFrom = <%FromDate|Enter start date%> SET @DisplayTo = <%ToDate|Enter end date%> SET @FromDate = dbo.fUniversalTime(@DisplayFrom) SET @ToDate = dbo.fUniversalTime(@DisplayTo)
SELECT SUM(ActiveDate), ActiveDate FROM (SELECT DISTINCT (ActiveDate) from [case])as T
Oracle named the system date as sysdate. Can anyone tell me what Microsoft named the system date? Any help would be greatly appreciated. Thanks in advance.
I'm starting with the question but my end would be to store the results of this data so I can query it from my Access front end using between dates to determine totals.
1) How do I create a SQL view/temp table to query count totals from an MS Access 2010
4) To calculate the count for each deliverable with no dates: Select (Select COUNT (*) as CountCAD from tblProject where CAD='true') as CADNumber, (Select COUNT (*) as CountRMS from tblProject where RMS='true')as RMSNumber
5) When I run the query between any dates, using tblProjectMilestonses.ProjectCompleted, what I would like is:
When looking at the data some days have multiple events. Now I want to generate a new table that show all the dates in this month showing the number of running events for that specific day.
I have a problem that I can't quite get started on solving.I have a table of asset statuses. Each time the asset status changes, anew row is inserted into the table.CREATE TABLE dbo.Tbl_EMStatusHistory (EMStatusID int IDENTITY (1, 1) NOT NULL ,EMSessionID int NULL ,AssetID int NOT NULL ,AssetStatus int NOT NULL ,StatusComment varchar (250) NULL ,StatusDate smalldatetime NOT NULL ,InsertUser sysname NOT NULL ,InsertDate smalldatetime NULL ,CONSTRAINT PK_EMStatusHistory PRIMARY KEY NONCLUSTERED(EMStatusID))Here is some sample data:EMStatusID AssetID AssetStatus StatusDate DeviceType4772622624OUT2003-10-05Monitor3810022624IN2003-10-16Monitor4726122624OUT2003-10-25 Monitor3819322624IN2003-11-02 Monitor3917122624RV2004-05-02 MonitorFor asset 22624, the current (most recent) status = RV. Before that, itlastchanged status on 2003-11-02, when it was IN. So it was IN from2003-11-02 to2004-05-02.I need to produce a report that counts the devices by type that were INon a given report date,like so:ReportDateMonitorsTransmitters05/01/2004342605/02/2004373005/03/2004393205/04/20043531The end user supplies the date range.I am unsure how to approach this. I came up with oneEinsteinian-Newtonian method that involved three temp tables, a gardenhose, and a duck, and it was getting uglier by the minute. Has anyonehad experience with a requirement like this? Thanks, Dave"Are you thinking what I'm thinking, Pinky?"*** Sent via Devdex http://www.devdex.com ***Don't just participate in USENET...get rewarded for it!
I am currently using this SQL code to capture some records over the last 2 months and it has been working great. I am now being asked if I can change this code with specifications:
1) Scan the records in the system until the count (*) as Volume reaches 30 because they prefer that as a denominator when figuring an average
2) Only run the scan for a maximum of 6 months.
So, there will most likely be some records that do not reach a volume number of 30 in this date range. In this instance we will just take the maximum volume number reached at 6 months.
So, how can I write this so it will build the file each time a record has reached the maximum of 30 and keep scanning back until we reach 6 months? If someone could lead me in the right direction on the proper order of the methodology in my code to accomplish these results it would be greatly appreciated. Desperate!
declare @startdate smalldatetime, @enddate smalldatetime , @month int, @year int
pe1.patev_loc_id as LocID, pp_cproc_id_r as ProcID, count (*) as Volume, sum (datediff (mi, pe1.patev_event_time, pe2.patev_event_time)) as Minutes, sum (datediff (mi, pe1.patev_event_time, pe2.patev_event_time))/count(*) as AvgMin
from risdb_rch08_stag..performed_procedure (index pp_serv_time_r_ndx), risdb_rch04_stag..patient_event pe1, risdb_rch04_stag..patient_event pe2
where pp_service_time_r between @Startdate and @Enddate and pp_asn_req_no = pe1.patev_asn_req_no and pp_asn_seq_no = pe1.patev_asn_seq_no and pp_status_v = 'CP' and pp_rep_id > 0 and pe1.patev_event_code = 'PB' and (pp_asn_req_no = pe2.patev_asn_req_no and pp_asn_seq_no = pe2.patev_asn_seq_no and pe2.patev_event_code = 'PL') and datediff (mi, pe1.patev_event_time, pe2.patev_event_time) > 0
I am wondering how to achieve a running count on the rows being displayed in a table list. Not sure how to get it to show 1 for first row, 2 for second row, 3 for third row and so on. Example
No | Name 1 | John 2 | Jane 3 | Jim
I am also wondering on the date format in SSRS. When I try to format the date 10/31/2007 in a DD/MM/YYYY format it does not come out so good. Basically I go to the cell property and choose custom formatting, input the formatting string d/mm/yyyy but it only shows 31/00/2007. Can you guys tell me what I am doing wrong?
Hi, I m using ASP.NET with C#. I m having one field which should store the datetime of the system. The datetime should be automatically stored for that entry when the user submits that record on the click event.Then it should display the date time on the gridview from database.I m using sqlserver 2005 and i have created the stored procedure for the insert command.This is the sample sp what should be written here to insert system date time automatically when the user submits the asp.net form ?Is there any code for writing directly in stored procedure or asp.net coding page... ALTER PROCEDURE [dbo].[StoredProcedure1]@salesid INT OUTPUT,@salesdate datetime,@customername varchar(20)ASBEGINSET NOCOUNT ONBEGIN INSERT INTO sales (customername) VALUES (@customername) SELECT @companyid = SCOPE_IDENTITY()END SET NOCOUNT OFFEND Thanxs in advance...
