I am looking for a way to count the number of times a stored procedure on the database has been executed over let's say over a period of time(month, years, etc).
Is there a system stored procedure or a system table that stores that information.
I am struggling to find some information about this topic Thanks for the help
I have a table with three fileds 1 - SmsTime (datatype = datetime) 2 - MsgCnt (datatype = int) 3 - Message (datatype = varchar)
Here MsgCnt means it will give the number of sms part (70 charector is equal to One SMS). So in each row MsgCnt may be vary. Some time it may be 1 or 3 or 5 or 2 etc. Now here I need to count how many MsgCnt is received on Today. Its not to count the rows but counting the MsgCnt fild value. Is there any sql way to find it.
I report SQL Server table information (table names, field names, field datatypes, etc.) to my users using an ACCESS front end. Most of this information exists in the system tables. But I can't find a record count per table in the system tables. What's the fastest way to get a record count for all tables?
I was wondering if i would be able to add a column in a view that assigns a value to each record and incriments the number each time by 1. Like the way an identity field works in a table.
I have a table that contains a list of departments (about 50) and another table that contains helpdesk tickets, each record storing the ID of the department sending the ticket. So I'm trying to count how manay tickets per department, I tought of using a subquery and a WHILE cycle but Its just not happening..I sketch up this query:
Code: WHILE (SELECT MAX(DepartmentID) AS c FROM dbo.tblDepartment) i < i.c BEGIN SELECT COUNT(DepartmentID) AS DepartmentCount FROM dbo.tblTask WHERE (DepartmentID = @Variable) END
how could I build this query or what better way of doing the job there are...
Hi,I am struggling with a simple query, but I just don't see it.I have the following example table.Table MessagesID Subject Reply_to1 A 02 Ax 13 A 14 B 05 By 46 C 0The table holds new messages as well as replies to messages.Messages with Reply_to = 0 are top messages, the other messages arereplies to a top message. The subject of a reply message does notnecessarily have to be the same as the subject of the top message.What I would like to have returned is this: a list of messages whereReply_to = 0 and the number of replies to this message.ID Subject Num_replies_to1 A 24 B 16 C 0Any assistance would be greatly appreciated.
I seem to remember reading many moons ago about a function where youcan retrieve a count of the last recordset you opened.For example:I've got a stored procedure that returns a recordset using the TOP 10so I only get the top 10 records. I need to know the recordcount but Idont want to reuse the SELECT statement because its quite complex.Any ideas?What does @@Count do?Thanks in advance
Table2 contains fields Group, Name,Category, Dimension (Group and Name are not in Table1)
So basically I need to read the records in Table1 using Groupid and each time there is a Groupid then select records from Table2 where Table2.Category in (Select Catergory from Table1) and Table2.Dimension in (Select Dimension from Table1)
In Table1 There might be 10 Groupid records all of which are different.
We have an helpdesk sytem on SQL 2000. I am trying to show how much calls have been assigned to each parent category plus it's child categories in a single row. The thing is when I run my query it display parent and child categories and each on it's own rows. I do get the call totals for each row, but I would like to add the totals of the rows together and display it on row. The new table must have then 6 rows (because there is 6 parent categories) with the total of all calls for that parent category, as well as it's childs. Example:
parameter # Calls ------------ -------- desktoppp 5 desktopqq 6 {This is what I am getting at this stage} desktop t 4 network r 9 networkgg 10 softwarevv 3
is there a way to get a count of records for each table in a database by table in one query? I can query each table using a count, but this is pretty tedious when you have 50+ tables. Anybody have any ideas?
I am trying to insert a record in a SQL2005 Express database. I can use the sp fine and it works inside of the database, but when I try to launch it via ASP.NET it fails... here is the code. I realize it is not complete, but the only required field is defined via hard code. The error I am getting states it cannot find "sp_InserOrder"
=== Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click Dim conn As SqlConnection = Nothing Dim trans As SqlTransaction = Nothing Dim cmd As SqlCommand conn = New SqlConnection(ConfigurationManager.ConnectionStrings("PartsConnectionString").ConnectionString) conn.Open() trans = conn.BeginTransaction cmd = New SqlCommand() cmd.Connection = conn cmd.Transaction = trans cmd.CommandText = "usp_InserOrder" cmd.CommandType = Data.CommandType.StoredProcedure cmd.Parameters.Add("@MaterialID", Data.SqlDbType.Int) cmd.Parameters.Add("@OpenItem", Data.SqlDbType.Bit) cmd.Parameters("@MaterialID").Value = 3 cmd.ExecuteNonQuery() trans.Commit() =====
I get an error stating cannot find stored procedure. I added the Network Service account full access to the Web Site Directory, which is currently running locally on Windows XP Pro SP2.
Please help, I am a newb and lost...as you can tell from my code...
Creating a stored procedure to insert records into multiple rows.
Let's say we have 3 colums in procedure to insert, col3 has a max limit of 1000, if col3 data exceeds limit it has insert into next row and vice versa.
Hi, I need to know whether a stored procedure returns only a single record or it can return more than one if the query if for example to return all records in a specific date range. Thanks.
I have two tables called A and B and C. Where A and C has the same schema
A contains the following columns and values ------------------------------------------- TaskId PoId Podate Approved
1 2 2008-07-07 No 3 4 2007-05-05 No 5 5 2005-08-06 Yes 2 6 2006-07-07 Yes
Table B contains the following columns and values ------------------------------------------------- TaskId TableName Fromdate Approved_Status
1 A 7/7/2007 No 3 B 2/4/2006 Yes
Now i need to create a stored procedure that should accept the values (Yes/No) from the Approved_Status column in Table B and should look for the same values in the Approved column in Table A. If both values match then the corresponding rows in Table A should be archived in table C which has the same schema as that of Table A. That is the matching columns should get deleted from Table A and shoud be inserted into Table C. In both the tables A and i have the column TaskId as the common column
I have a Execute SQL Task I get some values from a table onto three variables. Next step in a DFT, I try to execute a stored proc by passing these variables as parameters.
This is the syntax i use, in the parameters tab of the DFT I ensured that all the parameters are correctly mapped.
When I run the package, it executes successfully but no rows are fectched. I tried running the stored proc manually in the database, and it seems to work fine.
I have two tables called A and B and C. Where A and C has the same schema A contains the following columns and values-------------------------------------------TaskId PoId Podate Approved 1 2 2008-07-07 No 3 4 2007-05-05 No 5 5 2005-08-06 Yes 2 6 2006-07-07 Yes Table B contains the following columns and values-------------------------------------------------TaskId TableName Fromdate Approved_Status 1 A 7/7/2007 No3 B 2/4/2006 Yes Now i need to create a stored procedure that should accept the values (Yes/No) from the Approved_Status column in Table B and should look for the same values in the Approved column in Table A. If both values match then the corresponding rows in Table A should be archived in table C which has the same schema as that of Table A. That is the matching columns should get deleted from Table A and shoud be inserted into Table C. In both the tables A and B i have the TaskId as the common column Pls provide me with full stored procedure code.
select distinct pd.productcategory,pd.imagepath,pd.[description],p.productid,p.[name] ,p.designer,p.weight,p.price from productdescription pd inner join products p on pd.productcategory=p.productcategory where @prodcat=p.productcategory order by p.productid
return
My Results are:
ProductCategory ProductID (Rest of the columns) 22 47 22 47 22 58 22 58
In my productdescription table there are 2 rows in the productcategory column which has number 22. In the products table there are 2 rows(productid 47&58) in the productcategory column which has number 22. I believe this is many to many relationship problem but I do not know how to correct it. My results need to show only 2 records and not 4.
I have a stored procedure on an SQL Server database which displays statistical data for a single record. The example below selects a user ID as a parameter and displays the user's name and the total amount of transactions he has made: CREATE PROCEDURE dbo.GetUserStats @UserID BIGINT AS DECLARE @TempTable TABLE ( UserID BIGINT, UserName VARCHAR(60), TotalAmt FLOAT )
INSERT INTO @TempTable (UserID, UserName, TotalAmt) SELECT u.RecID, u.LastName + ', ' + u.FirstName, (SELECT SUM(t.Amount) FROM Transactions t WHERE t.UserID = @UserID) FROM Users u WHERE u.RecID = @UserID
SELECT * FROM @TempTable GO
So if I execute this amount entering a single ID, it returns a single row for that user:
UserID UserName TotalAmt -------------------------- 1 Doe, John 100.00
What I would like to do is create another stored procedure which calls this one for every user returned in a query, thus returning the same data for several users:
UserID UserName TotalAmt -------------------------- 1 Doe, John 100.00 2 Smith, Bob 123.45 3 Blow, Joe 150.55
Is there a way to re-use a stored procedure within another, based on the results of a query?
I am trying to put together a Stored Procedure that runs other SP's based on a records found condition. Sometimes my update table either by deleting duplicates or for other reasons is empty. Running a SP to update records on a table is not needed.
IF EXISTS (SELECT TOP 1 * FROM Work_Tables.dbo.Trace_Return_Updates WHERE TR_RecType = 'CT1') BEGIN EXEC IMB_Trace_Data.dbo.Update_CT1_Trace_Data END
IF EXISTS (SELECT TOP 1 * FROM Work_Tables.dbo.Trace_Return_Updates WHERE TR_RecType = 'CT2') BEGIN EXEC IMB_Trace_Data.dbo.Update_CT2_Trace_Data END
IF EXISTS (SELECT TOP 1 * FROM Work_Tables.dbo.Trace_Return_Updates WHERE TR_RecType = 'FULF') BEGIN EXEC IMB_Trace_Data.dbo.Update_FULF_Trace_Data END
I have a stored procedure named mySP that looks basically like this:Select Field1, Field2From tblMyTableWhere Field 3 = 'xyz'What I do is to populate an Access form:DoCmd.Openform "frmMyFormName"Forms!myFormName.RecordSource = "mySP"What I want to do in VBA is to open frmContinuous(a datasheet form) ifmySP returns more than one record or open frmDetail if mySP returnsonly one record.I'm stumped as to how to accomplish this, without running mySP twice:once to count it and once to use it as a recordsource.Thanks,lq
ALTER PROCEDURE [dbo].[SelectQueryAddressPostCodeSearchOnly]
(
@postcode nvarchar(50)
)
AS
SET NOCOUNT ON;
SELECT
Cust_Address.Cust_Address_ID,
Cust_Address.Cust_Address_1,
Cust_Address.Cust_Address_2,
Cust_Address.Cust_Address_Post_Code,
Cust_Address.Cust_Post_Town,
Post_Town.Post_Town_ID,
Post_Town.Post_Town_Name,
Post_Town.Post_Town_Priority
FROM Cust_Address
INNER JOIN Post_Town ON Cust_Address.Cust_Post_Town = Post_Town.Post_Town_ID
WHERE Cust_Address.Cust_Post_Town LIKE @postcode
The value for @postcode being passed for testing is "%SA%". I would expect this to return all records which have "SA" in the Post Code field. In the test database I am using there are several (Mainly SA43 0EZ). However the SP in fact returns no matching records at all.
Am I not understanding something here, or is there something to do with space in post code field that is causing a problem ? I have other SPs that are behaving just fine.
I am using SQL Server 2005 std edition SP2 on a Windows 2003 server. I have created a simple stored procedure that deletes all records from two tables:
BEGIN
SET NOCOUNT ON
DELETE FROM dbo.table1
DELETE FROM dbo.table2
END
Executing the procedure generates the message "The stored procedure executed successfully but did not return records." which produces an error condition when run from an Access 2007 VB module using the DoCMD function:
On Error GoTo ErrorExit DoCmd.SetWarnings False DoCmd.OpenStoredProcedure "dbo.myStoredProcedure"
When the above VB code is run (it's part of an Access 2007 adp project connected to the SQL Server database) it takes the error exit and returns the "... did not return records." message. How can I avoid this?? Thanks, Paul
In my ASP page, when I select an option from the drop down list, it has to get the records from the database stored procedure. There are around 60,000 records to be fetched. It throws an exception when I select this option. I think the application times out due to the large number of records. Could some tell me how to limit the number of rows to be returned to avoid this problem. Thanks. Query SELECT @SQLTier1Select = 'SELECT * FROM dbo.UDV_Tier1Accounts WHERE CUSTOMER IN (SELECT CUSTOMERNUMBER FROM dbo.UDF_GetUsersCustomers(' + CAST(@UserID AS VARCHAR(4)) + '))' + @Criteria + ' AND (number IN (SELECT DISTINCT ph1.number FROM Collect2000.dbo.payhistory ph1 LEFT JOIN Collect2000.dbo.payhistory ph2 ON ph1.UID = ph2.ReverseOfUID WHERE (((ph1.batchtype = ''PU'') OR (ph1.batchtype = ''PC'')) AND ph2.ReverseOfUID IS NULL)) OR code IN (SELECT DISTINCT StatusID FROM tbl_APR_Statuses WHERE SearchCategoryPaidPaymentsT1 = 1))'
I have a web app that calculates tax filing status and then stores data about the person.
Facts The insert is done through a stored procedure. All the sites that this program is being used are connecting through a VPN so this is not an external site. The duplicate records are coming from multiple sites (I am capturing there IP address). I am getting a duplicate about 3 or 4 times a day out of maybe 300 record inserts.
Any help would be greatly appreciated.
There are many sqlcmdInsert.Parameters("@item").Value =
Hi, and thanks in advance. I have VWD 2005 Express and SQL 2005 Express running. I have a SqlDastasource wired to the stored procedure. When I only include one Control parameter I get results from my Stored procedure, when I inclube both Control Parameters I get no results. I manually remove the second control parameter from the sqldatasource by deleting... <asp:ControlParameter ControlID="ddlSClosed" DefaultValue="" Name="SClosed" PropertyName="SelectedValue" Type="String" /> I have one Radio Group and one dropdownlist box that supplies the parameters. The dropdownlist parameter is Null or "" when the page is first loaded. Below is my SQLDatasource and Stored procedure. I am new to Stored Procedures, so be gentle. Any help would be appreciated!
ALTER PROCEDURE [dbo].[spDisplayServiceOrders] ( @SDate_Entered SmallDateTime, @SClosed nvarchar(50)= NULL ) AS If @SClosed IS NULL BEGIN
SELECT Service_Orders.SStore_Assigned_Number, Store_Info.Store_Other, Service_Orders.PO_Number, Service_Orders.SWorkType, Service_Orders.Service_Order_Number, Service_Orders.SDate_Entered, Service_Orders.SContact, Service_Orders.SClosed FROM Service_Orders INNER JOIN Store_Info ON Service_Orders.Store_ID = Store_Info.Store_ID and SDate_Entered >= @SDate_Entered Order by SDate_Entered DESC END ELSE BEGIN
SELECT Service_Orders.SStore_Assigned_Number, Store_Info.Store_Other, Service_Orders.PO_Number, Service_Orders.SWorkType, Service_Orders.Service_Order_Number, Service_Orders.SDate_Entered, Service_Orders.SContact, Service_Orders.SClosed FROM Service_Orders INNER JOIN Store_Info ON Service_Orders.Store_ID = Store_Info.Store_ID and SDate_Entered >= @SDate_Entered and SClosed = @SClosed Order by SDate_Entered DESC
Hi everyone, I have created a stored procedure in sql server with parameters for my c# application. Wanted to know is there anyway to set the default value for @searchpostcode to select all the records? Right now it brings the records based on the postcode specified .(I have dropdownlist in my c# application that passes the parameters for postcode) My stored procedure: CREATE PROCEDURE sp_accepting_practice (@searchpostcode as nvarchar(100)) AS SELECT dbo.tbdentists.Title, dbo.tbdentists.FirstName, dbo.tbdentists.Surname, dbo.tbpractices.PracticeName, dbo.tbpractices.PracticeAddress1, dbo.tbpractices.PracticeAddress2, dbo.tbpractices.Town, dbo.tbpractices.Postcode, dbo.tbpractices.Phone, dbo.tbdentistspractices.ListNo, dbo.tbtreatment.treatmentNatureFROM dbo.tbdentists INNER JOIN dbo.tbdentistspractices ON dbo.tbdentists.DentistId = dbo.tbdentistspractices.DentistId INNER JOIN dbo.tbpractices ON dbo.tbdentistspractices.PracticeId = dbo.tbpractices.PracticeId AND dbo.tbdentistspractices.PracticeId = dbo.tbpractices.PracticeId INNER JOIN dbo.tbtreatment ON dbo.tbdentistspractices.TreatmentId = dbo.tbtreatment.treatmentIdWHERE dbo.tbpractices.Postcode LIKE '%' + @searchpostcode + '%'ORDER BY dbo.tbpractices.PracticeId EXECUTE sp_accepting_practice G4GO I greatly appreciate your help. Thanks in Advance Regards Shini
