Hi,
I have a temp table that I use to calculate prices from and I need to know how many of each row with the same serialnumber.
I figured I could add a column that contains that number. But how will I get it there?
UPDATE [_temp] T1
SET T1.SERIAL_COUNT = (SELECT COUNT(*) FROM [_temp] T2 WHERE T1.SERIAL = T2.SERIAL)
Doesn't work. Any ideas?
Is there a way to get a SQL Stored Procedure to count the number of rows returned and then store that total in a variable?
View 1 Replies View Relatedhi all
quick question
is there any way to set up a column that has the row count in it? i need this for a program i am developing and this would make it much easier to deal with. I know i can get a total count but when i run a count within a select statement i just get '1' for every row. thanks
tibor
T-SQL counting rows with a value:
My query is like this:
SELECT
Name,
A,
B,
C,
D
FROM
Table
ORDER BY
Name
The query result looks like this:
Name A B C D
Bert 2 0 0 0
Bert 3 6 0 1
Mark 0 0 1 0
Mark 0 8 8 0
Mark 5 6 3 0
I want my result to count the cells with a value and group them on name Like this:
Name A B C D
Bert 2 1 0 1
Mark 3 2 3 0
COUNT() gives back every row from a name.
SUM() adds up the values
I have tried many things with sub queries and combined functions, but up until now with no results.
How do I do this ?
select statement joining file1 to file2. File 1 may have 0, 1, or many corresponding rows in file2. I need to count the corresponding rows in table2. Table2 also has a Boolean column and I need to count the number of rows where it is true. So I need to count the total number of matching rows and the count of those that are set to true. This is an example of what I have so far. I had to add each column being selected into a Group by to make it work, but I do not know why. Is there some other way this should be set up.
SELECT c.CarId, c.CarName, c.CarColor, COUNT(t.TrailerId) as trailerCount, (add count of boolian, say t.TrailerFull is true)
FROM Car c
LEFT JOIN Trailer t on t.CarId = c.CarId
GROUP BY c.CarId, c.CarName, c.CarColor
is there a way to count the sort of a query and still get the values in the query
columns1, column2, column3 are the same for 5 rows so give the values of each column and then count =5
Hi,
I'm using SQL Server 7.0. My problem is that I'd like to count how many rows are in a group by. For example, here is my data:
Agent Branch
1 1
2 1
1 1
2 1
1 2
1 2
If I do this:
Select Agent, Branch
From Table1
Group By Agent, Branch
I get:
Agent Branch
1 1
2 1
1 2
What I need to do is count the records (3) in the group by. I've tried a few things but I can't seem to come up with the number of rows in a group by.
Can anyone help me?
Thanks in advance,
Darrin
i have a report with 1 group and items under the group.
i want to add a new field called Sl. no. at the group level which keeps the count on groups...by that i mean say if there are 10 groups i want the number from 1 to 10 appear against each group as
1 Grp1
2 Grp2
3 Grp3
.
.
.
10 Grp10
How can i achieve the above. I tried the rownumber but it returns the number of rows the group has. The levels i have is "table1" the main scope and "table1_Group1" the group scope which in the table1 scope.
Any help will be appreciated.
Is it posible on a query ordered by employee name, for exemple, that MSSQL gives me a position of which employee is contained on the recordset?
that's my query (simplified)
SELECT name, payment, category FROM employee_payments ORDER BY name
John, 1000, sallary
Peter, 1500, sallary
Peter, 500, other
Zeus, 1000, sallary
I want to add another field giving me the position of the employee on the recordset:
John, 1000, sallary, 1
Peter, 1500, sallary, 2
Peter, 500, other, 2
Zeus, 1000, sallary, 3
Is it posible?
hi,
i have a stored procedure SELECT UserName AS Visitor, COUNT(VisitID) AS TotalVisit
FROM UserVisits
WHERE (ProductID = @ProductID) AND (AnonimIP IS NULL)
GROUP BY UserName
UNION
SELECT AnonimIP AS Visitor, COUNT(VisitID) AS TotalVisit
FROM UserVisits AS UserVisits_1
WHERE (ProductID = @ProductID) AND (UserName IS NULL)
GROUP BY AnonimIP
this will return something like:
zuperboy90 - 4 visits
ANONIMOUS - 6 visits
85.104.103 - 2 visits etc
how can i count the rows returned in both selections (4+6+2 = 12) ?
thank you
Hi all,
Can anyone explain to me how to count number of rows per page? I need to calculate an index size, and I think the factor that contributes the most to my formula`s inaccuracies is the number of rows per page.
Thanks.
Venus Lee.
Hi,
I have two tables,
Table A(A_ID, Info)
Table B(B_ID, A_ID, Blah) where B.A_ID references A.A_ID
How can I detemine how many records in table B reference each unique A_ID in table A?
I've tried the following but it doesn't work:
Select A.A_ID, COUNT(B.A_ID) FROM A
JOIN B ON A.A_ID = B.A_ID
Hi
I have a stored procedure which deletes a number of rows from a number of different tables. How to i count/return the number of deleted rows in each table?
Here is my stored procedure if it helps:
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[usp_delete_entry]
@new_venue_id int
AS
BEGIN
DECLARE@new_customer_id int
SET @new_customer_id = (SELECT customer_id FROM VENUE WHERE venue_id = @new_venue_id)
DELETE FROM FEATURED WHERE venue_id = @new_venue_id
DELETE FROM FACILITIES WHERE venue_id = @new_venue_id
DELETE FROM SIC WHERE venue_id = @new_venue_id
DELETE FROM SUBSCRIPTION WHERE venue_id = @new_venue_id
DELETE FROM ADMIN WHERE venue_id = @new_venue_id
DELETE FROM VENUE WHERE venue_id = @new_venue_id
DELETE FROM CUSTOMER WHERE customer_id = @new_customer_id
END
thanks
I hate to ask such silly helps..but I'm missing something here..need help.
I have a table having columns for createddate and deleteddate. The data gets created and deleted periodically and I need to find out the number of created,deleted and remaining number of records on each day. This query works, but takes a lot of time...not sure if there is a more better way to do this.. Please help
SELECT
CAST(createddate AS DATETIME) AS createdDate,
Created,
Deleted,
Remaining
FROM(
SELECT
CONVERT(VARCHAR,createdon,102) AS CreatedDate,
COUNT(1) created,
(SELECT COUNT(1) FROM table ta2
WHERE CONVERT(VARCHAR,ta2.deletedon,102) =
CONVERT(VARCHAR,ta.createdon,102)) Deleted,
((SELECT COUNT(1) FROM table ta1
WHERE CONVERT(VARCHAR,ta1.createdon,102) <=
CONVERT(VARCHAR,ta.createdon,102)) -
(SELECT COUNT(1) FROM table ta1
WHERE CONVERT(VARCHAR,ta1.deletedon,102) <=
CONVERT(VARCHAR,ta.createdon,102))) Remaining
FROM table ta
WHERE CONVERT(VARCHAR,createdon,102) >= (GETDATE() - 90)
GROUP BY CONVERT(VARCHAR,createdon,102)
ORDER BY CONVERT(VARCHAR,createdon,102) DESC)
AS tmp
Hi, I have a table that for ease has this data in:R1, R2, R....z---------------------A | 12A | 22A | 30B | 0B | -1B | -3C | 100I want to generate a table for each distinct row in R1, gives a countof all the rows with data correspondingFor the above table I would getA | 3B | 3C | 1Im probably being stupid but cannot see this at the moment... pleasehelp.Thanks
View 3 Replies View Relatedhi,
I would like to create a user defined SQL function which returns the number of rows which meets certain condition, and the average value of one of the culomns. I cannot find a code example for it. Please help.
Thanks,
Dror.
hi, I am importing data daily to many tables, I want to keep track of the #of rows for each import process. I already have created a trigger as follow:
CREATE TRIGGER tr_bcp_log ON dbo.A
FOR INSERT
AS
declare @name varchar(30),
@row_count int
select @name=name , @row_count= @@rowcount
from inserted
insert into bcp_tracks (name,row_count)
values(@name,@row_count)
GO
The problem is that I am getting a row for each inserted row in table A.for instance if I have 500 rows in table A, I will get 500 rows in the log table like this
table_name,#of rows
A 1
A 1
A 1
etc up to 500 rows for table A
This is not what I want, I want to capture the num of rows for every bcp process , so in the log table I want to see the following :
table_name, #of rows
A 500
B 600
C 450
A 250
etc
Any help ?
thanks
Ali
Select statement joining file1 to file2. File 1 may have 0, 1, or many corresponding rows in file2. I need to count the corresponding rows in table2. Table2 also has a Boolean column and I need to count the number of rows where it is true. So I need to count the total number of matching rows and the count of those that are set to true. This is an example of what I have so far. I had to add each column being selected into a Group by to make it work, but I do not know why. Is there some other way this should be set up.
SELECT c.CarId, c.CarName, c.CarColor, COUNT(t.TrailerId) as trailerCount, (add count of boolian, say t.TrailerFull is true)
FROM Car c
LEFT JOIN Trailer t on t.CarId = c.CarId
GROUP BY c.CarId, c.CarName, c.CarColor
Hello,
Is there a way (perhaps a property) to capture the number of rows selected from a Flat File Data Flow Source without having to develop a script to loop through the rows and count them?
Thanks a lot,
Grace
Hi all,
I have the following function:
Code Block
create function udf_CountRows(@pTableName sysname)
returns int
as
begin
declare @ret int
select @ret = SUM(p.rows)
from sys.partitions p
inner join sys.objects o
on p.object_id = o.object_id
and o.[name] = 'Well'
return @ret
end
Can I trust sys.partitions to always return the correct value or does it suffer the same issue as sysindexes prior to SQL2005?
Thanks
Jamie
Hi,
I need to count and display the number of records which have GradeTitle="SHO". I'm only starting to use BI development studio and all attempts at using the built in aggregate functions have failed.
Also, the report I wish to create has a fixed number of columns and a fixed number of rows as the info being displayed is really only counting values in the DB. I tried using Table but multiple rows were created.
I'd appreciate if anyone could point me in the right direction, as searching this forum turned out to be pretty fruitless for me.
Thanks in advance,
John
When I have made a query with IDC, how can I make a counter in the .htx-file, which tells me if there was no query-results ?
View 2 Replies View RelatedHi,New to SQL. Got some questions about it.Suppose I have two tables. Each of them has a single column, named asc1. For table T1, I have:11133579For table T2, I have:1234513The exercise I want to do is to select the number of occurence in T1for those elements in T2. For above tables, I want to show:1 3 ( i.e. "1" is in T2 and shows 3 times in T1)2 0 (i.e. "2" is in T2 but doesn't show in T1)3 2 (i.e. "3" is in T2 and show 2 times in T1)It seems I can't figure out a good way to do this. Any help will beappreciated.Thanks
View 2 Replies View Related
I am working on writing a query to use with Reporting Services where I am pulling grades from a school grade book trying to see what students qualify for Honor Roll.
I have one Honor Roll done but am still working on the other. The qualifications I am trying to get is that a student has a gpa >3.0 and can have one C grade. I've got the 3.0 and the C's down but how to get the query to pull anyone having at the most one C. It doesn't matter whether it is C+, C, or C- but the student can't have more than a count of one.
Here is what I have
SELECT DISTINCT s.lastname+','+' '+s.firstname AS Student, s.studentnumber,e.grade,t.name AS Term,
gs.score, c.name AS Course, se.teacherdisplay
FROM GradingScore gs
INNER JOIN student s ON s.personid = gs.personid
INNER JOIN v_TermGpa tg ON tg.personid = s.personid
INNER JOIN enrollment e ON e.enrollmentid = s.enrollmentid AND e.calendarid = gs.calendarid
INNER JOIN scheduleStructure ss ON ss.calendarid = gs.calendarid
INNER JOIN Termschedule ts ON ts.structureid = ss.structureid
INNER JOIN Term t ON t.termscheduleid = ts.termscheduleid
INNER JOIN section se ON se.sectionid = gs.sectionid
INNER JOIN course c ON c.courseid = se.courseid
WHERE gs.calendarID = 20 AND t.name ='1st 6wk' AND tg.term1gpa >=3.0 AND s.enddate IS NULL
AND gs.score <='C-'
AND (select gs1.personid, gs1.score
from gradingscore gs1
inner join enrollment e1 on e1.personid = gs1.personid
Inner join schedulestructure ss1 on ss1.calendarid = e1.calendarid
Inner join termschedule ts1 on ts1.structureid = ss1.structureid
Inner join term t1 on t1.termscheduleid = ts1.termscheduleid
where gs1.score IN('C','C+','C-') and (count(score)= 0 or count(score) < 2))
ORDER BY s.[student]
I can get it to work all the way up to where the And (count(score) starts then there is something about the way the count is in there that I haven't figured out yet.
Thanks in Advance for any help or advice
Hi,
How do I count the total number of each row in a table? The table Company has a field called Group. How do I count the total amount of members in each group?
Thanks in advance!
Hi all,
I would like to have my SQL statement result to return an additional "column", automatically adding an "auto-increasing" number with it.
So if I for example select all Dates older than today's date, I would want something like this:
1
10/12/2006
2
10/18/2006
3
10/20/2006
4
10/22/2006
5
10/30/2006
Keep in mind that it's not my intention to fysically insert the "counting" column into the table, but rather do it "virtually".
Is this possible? And if yes, how ? :)
Thanks in advance
Nick
Sorry for all the code below. I am realizing that my DB design is bad but I already have 7 pages built around it that work fine...until now, so I would really like to not change the DB if possible. My table has 22 columns: iID which is the identity colum. Then there is iAsmtID which is the assessment ID. Lastly there are 20 colums- q1 through q20, each of which will have a 1, 2, or 3, depending on the radio buttons the user clicked. Nows my problem. I have to find a percent for the assessment. It works like this. 3s are NA so we are not worried about them now. I need to find the number of ones and the number of twos for each assessment ID. Then add those together and divide by the number of ones. How can I find the number of the ones and twos. I have below but its not working. Says there is incorrect syntax at the ',' which is a different color below. Any and all help appreciated.'Open connectionset conn=Server.CreateObject("ADODB.Connection")conn.open My_Connset rs = Server.CreateObject("ADODB.Recordset")str = "SELECT SUM((CASE WHEN q1=1 THEN 1 ELSE 0 END)+(CASE WHEN q2=1 THEN 1 ELSE 0 END)+(CASE WHEN q3=1 THEN 1 ELSE 0 END)+(CASE WHEN q4=1 THEN 1 ELSE 0 END)+(CASE WHEN q5=1 THEN 1 ELSE 0 END)+(CASE WHEN q6=1 THEN 1 ELSE 0 END)+(CASE WHEN q7=1 THEN 1 ELSE 0 END)+(CASE WHEN q8=1 THEN 1 ELSE 0 END)+(CASE WHEN q9=1 THEN 1 ELSE 0 END)+(CASE WHEN q10=1 THEN 1 ELSE 0 END)+(CASE WHEN q11=1 THEN 1 ELSE 0 END)+(CASE WHEN q12=1 THEN 1 ELSE 0 END)+(CASE WHEN q13=1 THEN 1 ELSE 0 END)+(CASE WHEN q14=1 THEN 1 ELSE 0 END)+(CASE WHEN q15=1 THEN 1 ELSE 0 END)+(CASE WHEN q16=1 THEN 1 ELSE 0 END)+(CASE WHEN q17=1 THEN 1 ELSE 0 END)+(CASE WHEN q18=1 THEN 1 ELSE 0 END)+(CASE WHEN q19=1 THEN 1 ELSE 0 END)+(CASE WHEN q20=1 THEN 1 ELSE 0 END) AS [color:#FF0000]CountOfOnes,SUM[/color]((CASE WHEN q1=2 THEN 1 ELSE 0 END)+(CASE WHEN q2=2 THEN 1 ELSE 0 END)+(CASE WHEN q3=2 THEN 1 ELSE 0 END)+(CASE WHEN q4=2 THEN 1 ELSE 0 END)+(CASE WHEN q5=2 THEN 1 ELSE 0 END)+(CASE WHEN q6=2 THEN 1 ELSE 0 END)+(CASE WHEN q7=2 THEN 1 ELSE 0 END)+(CASE WHEN q8=2 THEN 1 ELSE 0 END)+(CASE WHEN q9=2 THEN 1 ELSE 0 END)+(CASE WHEN q10=2 THEN 1 ELSE 0 END)+(CASE WHEN q11=2 THEN 1 ELSE 0 END)+(CASE WHEN q12=2 THEN 1 ELSE 0 END)+(CASE WHEN q13=2 THEN 1 ELSE 0 END)+(CASE WHEN q14=2 THEN 1 ELSE 0 END)+(CASE WHEN q15=2 THEN 1 ELSE 0 END)+(CASE WHEN q16=2 THEN 1 ELSE 0 END)+(CASE WHEN q17=2 THEN 1 ELSE 0 END)+(CASE WHEN q18=2 THEN 1 ELSE 0 END)+(CASE WHEN q19=2 THEN 1 ELSE 0 END)+(CASE WHEN q20=2 THEN 1 ELSE 0 END) AS CountOfTwos FROM ITCC_Test WHERE iAsmtID="&iAsmtIDresponse.Write(str)rs.open str, connif rs.eof = true then ' response.Write("<h2>No count done</h3>") response.End()else'Declare variables CountOfOnes = rs("CountOfOnes") CountOfTwos = rs("CountOfTwos")end ifrs.closeset rs = nothingconn.close'set conn = nothing
View 2 Replies View RelatedHi everyone,
another problem:
I'm trying to count the number of rows but it's not working. Here's my code:
SELECT 'TOTAL number of rows', count(*) --This counts 4! The total number of rows in [Activites]
FROM [Activities]
WHERE [Person ID] IN
(
SELECT DISTINCT [Person ID] --This brings back 2 rows (two specific people)
FROM [Activites]
)
As my comments say, I'm wanting to count the two rows but it's counting every row. Obviously I'm doing something wrong but I can't work it out.
Any help?
Andrew
Hi,
I'm trying to include the COUNT(*) value of a sub-query in the results of a parent query. My SQL code is:
SELECT appt.ref, (Case When noteCount > 0 Then 1 Else 0 End) AS notes FROM touchAppointments appt, (SELECT COUNT(*) as noteCount FROM touchNotes WHERE appointment=touchAppointments.ref) note WHERE appt.practitioner=1
This comes up with an error basically saying that 'touchAppointments' isn't valid in the subquery. How can I get this statement to work and return the number of notes that relate to the relevant appointment?
Cheers.
Hi,
How can I aggregate a top 5 count across two satellite tables?
e.g. Orders and downloads table each have multiple entries for the same customer ID I would like to count the orders and add them to the downloads count too e.g. 5 orders added to 10 downloads giving 15 as the total for this customer and get a total 'site activity' result which I would like to select the top 5 for.
Any help or pointers would be a great help!
Thanks.
Hi. I have a small problem that i just can't seem to figure out. I'm trying to generate a report for a case management system. The problem I am having is trying to exclude some of these results. Here is my query:
SELECT COUNT(DefendantCase.ProsAtty) AS CountOfProsAtty
FROM DefendantCase LEFT JOIN DefendantEventPros ON DefendantCase.VBKey=DefendantEventPros.VBKey
WHERE DefendantCase.StatusID=17 AND DefendantCase.ProsAtty=55
AND DefendantEventPros.EventDate BETWEEN DATEADD(DAY,-60,GETDATE()) AND GETDATE() AND DefendantEventPros.EventID=9
This query is trying to find the total amount of cases where the statusid=17, the prosatty=55, the date is between today and 60 days ago, and there is an eventid=9.
now, i'm not getting errors in the query itself; it's just that it's inflating the total number. If a case has more than one eventid=9, it will include that extra in the results. I do not want to include those in the results. Does anyone have any suggestions? Thanks!
hiya all,
I got a table that is represented as a B-Tree, it has a one to
many relation with its self
------------
| UserID |
------------
|FatherID|
------------
UserID = FatherID
it looks like this
o
/// \
ooo ooo
//\ ///\
oo ooo ooo
I want to get all the nodes that has 256 children and grand children and each node is limited to have 6 nodes under it.
any ideas ? the DB isn't filled with data yet so we can add more fields
to the table if it helps.
I could write a trigger that increments a counter in each node but it will be a recursive trigger so it can go from the child to its father and the father to its father upating them and so on.
regards
Ahm
I have a table that I want to use for reports that holds these datatypes
safe: Integer
unsafe: Integer
made_safe: Bit
unobserved: Bit
Which gets populated.
I want to count the values in each field but Bit fields seem to be awkward. This is my attempt
SELECT
SUM(safe)as TotalSafe,
SUM(unsafe)as TotalUnsafe,
COUNT(Case WHEN unobserved = 1 THEN 1 ELSE NULL END)as NotSeen,
COUNT(Case when made_safe = 1 THEN 1 ELSE NULL END) as TotalMadeSafe
FROM myTable
Any ideas please