My database is marked suspect/offline in the enterprise manager. i am
using
sql server 2000.i have tried resetstatus,DBCC CheckDB, alter
database,sp_dboption and DBCC ALLOCDB ( 'dbname' ) but all to no
avail.i
have no backup of the database.
And i really need to get back this data.Please, can you give me a
detail
step by step method of how to overcome this problem.
i greatly anticipate your reply!!!
Thanks
Hi Everybody,
What type of 'Database Crash' can we expect in SQL Server 7.0.? and How do we rectify this ?.
Thanks in Advance.
Srinivasan
Hi All,
What are the steps of recovering SQL Server 2000 database after it crashes?
Is it documented somewhere?
Hi all
I Never come across the Database crashing situation.
1.How to finilised Database was crashed (If Database in "Suspend" mode we can call as Crashed).
2.What are the action we have to take to bring up Database(a part from restore Database from last know good backups)
Hi my name is Rodrigo and Im from Brasil, so, sorry about my english.
I have a problem using MSSQL 2000. Iīm using a client/server application, and sometimes (almost every day) the sql server start to use 100% of CPU and crash the system. I donīt know how and when but it hapens always. I never found a reason for it, but looking at the event viewer in windows 2000 i saw an error about www publishing (something like that). Maybe my sqlserver is trying to connect to internet to do something (i donīt know). Please if somebody can help me send me a mail. Thanks a lot.
Hi, I'm trying to install SQL Server 2000 Dev Edn. When I install client and server tools it will crash after I enter the administration password. But this only happens when I install it with server tools, its OK with just client tools. Thanks
View 8 Replies View RelatedHi,
My Sql server went down last night. Is there a way to find out what could have caused system to crash?
Is there any way to notify the DBA when sql services have stopped running?
Any hint/suggestion is highly appreciated..
Thanks..
Ann
Hello,
Recently my computer had a crash on which SQL Server was installed. And if that wasn't enough, the backup failed to. Now I've installed SQL Server again, but I have these *.mdf and *.ldf files, which contains my data and my tables etc. So my question is, how do I get this data into my newly installed SQL Server? Maybe it's quite simple, but I can't find it.
Im using SQL Server Enterprise version 7.0 on Win2k Advanced Server.
Many thanks in advance,
Stefan.
Hi,
My sql server stopped unexpectedly and restarted itself today, and I have no clue why. The NT Event Viewer provides this "insight":
The MSSQLService terminated unexpectedly.
The event id is 17052, which isn't documented in BOL. Does anyone have any explanation, and some suggestions on how to avoid this in the future?
thanks,
Jason
hello:
Does anyone have any input on why my SQL Server keeps crashing? I get the following errors:
Error : 17805, Severity: 18, State: 0
00/03/21 09:06:06.42 ods Invalid buffer received from client.
00/03/21 09:09:51.56 kernel SQL Server terminating due to 'stop' request from Service Control Manager
At other times, there were some STACK DUMP ERRORS.
We are on service pack 4 (I have been pushing to apply 5a)
Please help,
Thank you.
Hi Folks,
I got the following message in the error log when SQL Server 6.5 crashed.
''Stored function 'xp_runwebtask' in the library 'xpsqlweb.dll' generated access violation; SQL Server is terminating process 60''
Source:spid 60
Anyone know what this means ? If you think you know of have come across it before, please inform me.
Thanks
Alan
I need help. I am facing following problems since days
here you have the errors messages:
Mesg 18264 : DATABASE dumped with following info: Database Name:IITMSDB, Creation Date and Time:Feb 12, 99(23:00), Pages dumped:3898618, Current Sequence:36201 19370307, Sort Order:52, Striped:NO, Number of Dump Devices:1, device info:(VOLID=SS0001 NAME=iitmsdb_dump TYPE=DISK FILE=1)
Mesg 17562 : Checking space allocation for database 6
Mesg 18109 : Recovery dbid 10 ckpt (590112,18) oldest tran=(590112,0)
Error : 0, Severity: 19, State: 0
SQLDumpExceptionHandler: Process 49 generated access violation; SQL Server is terminating this process
Error : 0, Severity: 19, State: 0
SQLDumpExceptionHandler: Process 102 generated access violation; SQL Server is terminating this process
Mesg 17309 : The current contents of process' input buffer are '_cursoropen'.
Error : 925, Severity: 19, State: 1
Maximum number of used databases for each query has been exceeded. The maximum allowed is 8.
Thanks a lot. Bangaly
Hi.
I need urgent help :o/
My laptop crashed and I am not able to start any programs but I can reach the files.
How can I get a hold on by database tables???
Please help me.
BEST REGARDS
Badleif
Greetings,I had a hard-drive failure this week and lost my root drive, withoperating system and SQL Server 2000.Fortunately my data was on another volume and still exists.I know about sp_attach_db, but looking at BOL, it says that sp_attach_dbonly works with databases that were previously detached withsp_detach_db.How do I reattach my existing mdf and ldf files?-- RickP.S. I know that the dbs are not corrupt because when the hard drivefailed SQL Server was offline.
View 2 Replies View RelatedHidue to big problems (basically since a couple of month iis service crashseveral times a day) i need to format a web server (win2k, sp4, iis5.0)where all our sites are hosted .To avoid downtime i would like to transfer them all on the new server.Do i have to recreate every single web (with a lot of virtual folders ) orthere is an automatic (semiautomatic) way to migrate them all?Many thanks in advanceMarco
View 2 Replies View RelatedHi all, I have some trouble with SQLAgent...when I try to schedule a jobthat invokes a script (vbs, java, cmdshell,...), SQLAgent crashes at themoment of scheduled execution. If I try to execute it manually, all worksfine. This installation runs on a cluster Win2003 and the node initiate afailover if I don't delete the job and then restart Agent (I can't start theservice before deleting that job!!!). Event viewer logs something like:"LOG] Exception 5 caught at line 191 of file ..src
efreshr.c.SQLServerAgent initiating self-termination".I've already tried to debug the service but my dump did not help me.Any suggestion?Thankscamau
Hello,
From time to time, our production system crashes and reboots while running some data warehouse load packages. There is nothing in the logs; it just seems like the reset button is pushed. The situation occurs at different moments in the batch and not every night, but lets says once every two weeks or more frequent.
We are running Windows 2003 server and SQL Server 2005 SP1 incl. hotfixes.
Does anyone of you have this issue, or is this a hardware issue without any doubt? Could there be any chance it's in the SQL Server software?
Regards, Jeroen
Hi all,
I'm running on Windows Server 2000 datacenter with sp4 and SQL Server 2000 SP4 on 16 GB AWE and /PAE enabled. Apparently the SQL Server service stops intermittently.
Below is the error I got on the application log.
"SqlDumpExceptionHandler: Process 788 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process."
Below is a part of the SQLdump that was created.
=====================================================================
BugCheck Dump
=====================================================================
This file is generated by Microsoft SQL Server 8.00.2040
upon detection of fatal unexpected error. Please return this file,
the query or program that produced the bugcheck, the database and
the error log, and any other pertinent information with a Service Request.
Computer type is AT/AT COMPATIBLE.
Bios Version is Phoenix ROM BIOS PLUS Version 1.10 1.1.0
Phoenix ROM BIOS PLUS Version 1.10 1.1.0
Current time is 10:27:18 07/02/07.
4 Intel x86 level 6, 2992 Mhz processor(s).
Windows NT 5.0 Build 2195 CSD Service Pack 4.
Memory
MemoryLoad = 82%
Total Physical = 7903 MB
Available Physical = 1373 MB
Total Page File = 11795 MB
Available Page File = 5311 MB
Total Virtual = 2047 MB
Available Virtual = 296 MB
*Dump thread - spid = 72, PSS = 0x41d77260, EC = 0x41d77590
*
* User initiated stack dump. This is not a server exception dump.
*
*Stack Dump being sent to C:Program FilesMicrosoft SQL ServerMSSQLlogSQLDu
mp0001.txt
* *****************************************************************************
**
*
* BEGIN STACK DUMP:
* 07/02/07 10:27:18 spid 72
*
* ex_raise2: Exception raised, major=79, minor=87, severity=22
*
*
Regards,
Larry
Hi, i am not familiar with MSSQL so maybe it's not as difficult to you as it is to me - in brief:
SQL version: Microsoft SQL Server 7.00 - 7.00.699 (Intel X86)
Errorlog shows:
Starting up database 'CH2'.
Opening file E:CH2DATA1CH2DATA1.mdf.
Opening file E:CH2DATA2CH2DATA2.ndf.
Opening file E:CH2DATA3CH2DATA3.ndf.
File D:CH2LOG1CH2LOG1.ldf does not exist - unable to activate.
Enterprise Manager
Shows database CH2 (suspect)
Executing script:
sp_add_log_file_recover_suspect_db CH2, CH2LOG1, 'D:CH2LOG1CH2LOG1.ldf', 1000
Shows errormessage "The database 'CH2' does not exist."
How can i get a new logfile?
What if i created a new db 'CH2' and then replaced the data files?
What do i have to tell MSSQL to create a new logfile on startup?
All scenarios shown in Books On Line only seem to solve problems
if you do have a logfile and need more space.
Greetings from Switzerland /Lothar
Been trying to send this all week...
-----Original Message-----
From: Driggers, John
To: 'SQL Discussions'
Sent: 10/27/99 9:10 AM
Subject: FW: Weekly server hang
I also see the one below prior to another crash....going through tech
net now...but not seeing anything that reflects the messages below. The
results from searching on "Exception_Access_Violation" I'm not sure
apply in my case...also looks like I have at least two causes of crashes
(how can one interpret the below statements???)
Thanks, John
--------------------
99/10/24 10:38:00.06 spid10 EXCEPTION_ACCESS_VIOLATION raised,
attempting to create symptom dump
99/10/24 10:38:00.06 spid10 Initializing symptom dump and stack dump
facilities
99/10/24 10:38:02.61 spid10 ***BEGIN STACK TRACE***
99/10/24 10:38:02.61 spid10 0x00404CD9 in SQLSERVR.EXE,
rm_ods_handler() + 0x0329
99/10/24 10:38:02.64 spid10 0x00405571 in SQLSERVR.EXE, st_do_enlist()
+ 0x00C1
99/10/24 10:38:02.64 spid10 0x004071CA in SQLSERVR.EXE,
CDTCState::init() + 0x033A
99/10/24 10:38:02.65 spid10 0x005A70A3 in SQLSERVR.EXE,
lddb_fixdbosuid() + 0x0423
99/10/24 10:38:02.68 spid10 0x005A6CC2 in SQLSERVR.EXE,
lddb_fixdbosuid() + 0x0042
99/10/24 10:38:02.68 spid10 0x005963CB in SQLSERVR.EXE, textalloc() +
0x04CB
99/10/24 10:38:02.71 spid10 0x00463F4B in SQLSERVR.EXE, agghaving() +
0x004B
99/10/24 10:38:02.71 spid10 0x00409829 in SQLSERVR.EXE, opencheck() +
0x0089
99/10/24 10:38:02.71 spid10 0x00427B09 in SQLSERVR.EXE,
tbswritecheck() + 0x0969
99/10/24 10:38:02.71 spid10 0x00250FED in opends60.dll
99/10/24 10:38:02.71 spid10 0x0025055B in opends60.dll
99/10/24 10:38:02.71 spid10 0x002414D1 in opends60.dll
99/10/24 10:38:02.71 spid10 0x00241384 in opends60.dll
99/10/24 10:38:02.71 spid10 0x10219D84 in MSVCRT40.dll
99/10/24 10:38:02.71 spid10 0x77F04F3E in KERNEL32.dll
99/10/24 10:38:02.71 spid10 ***END STACK TRACE***
************************************************** **********************
*************
Cindy, nothing in the NT logs but found this in the SQL logs:
99/10/25 09:25:15.45 spid71 EXCEPTION_ACCESS_VIOLATION raised,
attempting to create symptom dump
99/10/25 09:25:15.45 spid71 Initializing symptom dump and stack dump
facilities
99/10/25 09:25:20.45 spid71 ***BEGIN STACK TRACE***
99/10/25 09:25:20.46 spid71 0x00404CD9 in SQLSERVR.EXE,
rm_ods_handler() + 0x0329
99/10/25 09:25:20.52 spid71 0x005725C1 in SQLSERVR.EXE, stuff() +
0x0241
99/10/25 09:25:20.54 spid71 0x0056D35F in SQLSERVR.EXE, ncrid_update()
+ 0x057F
99/10/25 09:25:20.57 spid71 0x0051DD35 in SQLSERVR.EXE, prRESOURCE() +
0x0055
99/10/25 09:25:20.57 spid71 0x00464C65 in SQLSERVR.EXE, genbuiltin() +
0x0445
99/10/25 09:25:20.59 spid71 0x00427B09 in SQLSERVR.EXE,
tbswritecheck() + 0x0969
99/10/25 09:25:20.62 spid71 0x00250FED in opends60.dll
99/10/25 09:25:20.62 spid71 0x0025055B in opends60.dll
99/10/25 09:25:20.62 spid71 0x002414D1 in opends60.dll
99/10/25 09:25:20.62 spid71 0x00241384 in opends60.dll
99/10/25 09:25:20.62 spid71 0x10219D84 in MSVCRT40.dll
99/10/25 09:25:20.62 spid71 0x77F04F3E in KERNEL32.dll
99/10/25 09:25:20.62 spid71 ***END STACK TRACE***
This proceeds my 'crashes', which it looks scary enough to do the trick!
Any idea what could be causing this exception?
Thanks, John
ps. someone else mentioned backup software - we use BackupExec and I
have a sched. task that dumps one of the databases to a network drive 2x
day. But these are running throughout the week...looking over the logs I
really don't see a correlation...(ie. these same processes run on days
that no crash occurs and successfully later in the day that the crashes
do occur (some hours earlier).
-----Original Message-----
From: Gross, Cindy [mailto:CindyGross@hmhs.com]
Sent: Monday, October 25, 1999 2:14 PM
To: SQL 6.5 Discussions
Subject: RE: Weekly server hang
Did you check the SQL Server errorlog (sometimes things are written here
that don't go to the event viewer) and the NT event viewer (application
and
system)?
You could try turning on SQL Trace to see if you can capture a "bad"
query
but depending on how SQL goes down it may not be captured.
If you are auditing successful logons you could take a look to see if
there
is any pattern in who logs in just before SQL restarts.
Any chance someone is actually stopping it on purpose? Or maybe a
program
that is stopping it (maybe a backup system trying to backup the device
files
instead of the dumps)?
Cindy Gross
SQL Server MCP
Texas Health Resources
http://members.tripod.com/cindygross/sqlsrvr.htm
> -----Original Message-----
> From:Driggers, John [SMTP:John_Driggers@spspay.com]
> Sent:Monday, October 25, 1999 12:26 PM
> To: SQL 6.5 Discussions
> Subject: Weekly server hang
>
> List-Unsubscribe: <mailto:leave-mssql-13928C@ls.swynk.com>
> List-Software: Lyris Server version 3.0
> List-Subscribe: <mailto:subscribe-mssql@ls.swynk.com>
> List-Owner: <mailto:owner-mssql@ls.swynk.com>
> X-URL: <http://www.swynk.com/sysapps/sql.asp>
> X-List-Host: swynk.com discussion lists <http://www.swynk.com>
> Reply-To: "SQL 6.5 Discussions" <mssql@ls.swynk.com>
> X-Message-Id: <06F417B00B8CD1119BA400008322DF6D03515E78@spsgex01>
> Sender: bounce-mssql-14964@ls.swynk.com
> Precedence: bulk
>
> This one is bugging the tar out of me. Running SQL 6.5 sp5a, NT4 sp4
on
> the
> server. Either on the weekend or Mon. mornings (happened all 3 days
this
> past week) the SQL service stops on the server. This is during low
usage
> times. The box is a DELL 4300 dual 450 w 512 RAM (250 dedicated to
SQL).
> All
> other services on the server are ok, except for SQL.
>
> I'm thinking maybe a bad query hitting the server (I've seen this
happen
> before) but the programmers claim there is nothing special about these
> time
> periods that something "unique" would be happening. After I restart
the
> server it may not happen until the next week (this past weekend being
an
> exception). I thought maybe I had a memory leak but running perf.
monitor
> before a crash once revealed 99+% data cache, available proced. crash,
low
> CPU usage, low swapping....anything else I could check?
>
> Maybe reinstalling the sp5a? Any suggestions on things to try would be
> most
> appreciated...
>
> Thanks, John
>
>
> ------
> FAQ: http://www.swynk.com/faq/sql/sqlserverfaq.asp
> Please post SQL Server 7.0 questions to the SQL 7 list
> http://ls.swynk.com for list server signup/maint options
> You are subscribed as cindygross@hmhs.com
> Archives: http://www.swynk.com/sitesearch/search.asp
> To unsubscribe send a blank email to leave-mssql-13928C@ls.swynk.com
------
FAQ: http://www.swynk.com/faq/sql/sqlserverfaq.asp
Please post SQL Server 7.0 questions to the SQL 7 list
http://ls.swynk.com for list server signup/maint options
You are subscribed as John_Driggers@spspay.com
Archives: http://www.swynk.com/sitesearch/search.asp
To unsubscribe send a blank email to leave-mssql-13928C@ls.swynk.com
Hi,
What is the simplest way to crash a sql server?
Somebody asked me that question, and I was unable to give the best answer. Please help me to find it.
Thanks!!
Joydeep
Hi all, I was wondering if you's could help me out.
We run sql optimization on 2 of our databases and when they run they cause our server to crash - system log reports: unexpected shutdown. When we take these jobs out of action the server does not crash.
I'm not sure if this could be a CPU or memory related issue or if its a SQL configuration issue?
Any comments/ideas would be great.
Thanks.
I am not sure if this is the right forum,
but a sql crash might cause data corruption ?!
Anyway I have tried this on 2 different sql2005 sp1 installations.
(Developer Edition)
And in both cases the last piece of code causes the sql server to stop cold (crash).
script originally posted here(afaik):
### link removed ###
####################
I removed the script
Didn't seem like a good idea to make this kind of thing public
####################
rockmoose
Hi All,Our SQL Server just crashed with the following messages:The Scheduler 5 appears to be hung. SPID 85, ECID 0, UMS Context 0x06C22478.Error: 17883, Severity: 1, State: 0We are running SP3 on cluster on a SAN.Any ideas?ThanksMichael
View 1 Replies View RelatedImporting DBase files I get to the screen titled "Select Source Tableand Views" And none appear in the list. (I can get the list displayedabout once in ten tries) From that screen anything causes a crash ofthe wizard and Enterprise Manager. This happens on my deveopmentinstallation of Enterprise Manager Version 8.0.Any Ideas/ PleaseJohn Cooper
View 1 Replies View RelatedOur SQL server keeps crashing with the following error. When it crashed it completely shut down the server. Could you please give me advice on how to stop this from happening again? I would like to thank in advance for your help.
A MS DTC component has encountered an internal error. The process is being terminated. Error Specifics: A non-MS DTC XA Library threw an exception in function olog
ntdll!KiFastSystemCallRet + 0x0
+ 0xd58c3c0
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Here is the information of our server
OS Name Microsoft(R) Windows(R) Server 2003, Standard Edition
Version 5.2.3790 Service Pack 1 Build 3790
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name SQL2387
System Manufacturer Dell Computer Corporation
System Model PowerEdge 2850
System Type X86-based PC
Processor x86 Family 15 Model 4 Stepping 3 GenuineIntel ~3790 Mhz
Processor x86 Family 15 Model 4 Stepping 3 GenuineIntel ~3790 Mhz
Processor x86 Family 15 Model 4 Stepping 3 GenuineIntel ~3790 Mhz
Processor x86 Family 15 Model 4 Stepping 3 GenuineIntel ~3790 Mhz
BIOS Version/Date Dell Computer Corporation A04, 9/22/2005
SMBIOS Version 2.3
Windows Directory C:WINDOWS
System Directory C:WINDOWSsystem32
Boot Device DeviceHarddiskDmVolumesSQL2387Dg0Volume1
Locale United States
Hardware Abstraction Layer Version = "5.2.3790.1830 (srv03_sp1_rtm.050324-1447)"
User Name Not Available
Time Zone Eastern Standard Time
Total Physical Memory 4,095.08 MB
Available Physical Memory 1.75 GB
Total Virtual Memory 1.83 GB
Available Virtual Memory 3.81 GB
Page File Space 2.00 GB
Page File C:pagefile.sys
I am using ReportViewer Control on my asp.net page. Report consists of three datasets with each having its own table. All thses three tables are vertcally and horizonatlly aligned and have same numbers of columns. Report looks like a homgeneous single report. Output of report is on three pages since there are many rows. Page 1 and 2 displayes rows from dataset1/table1(it has large amout of data compared to other two datasets) and last page has remaining rows from dataset1/table and and rows from dataset2/table2 and dataset3/table3. While on page 1 and 2 vertical scrollbar runs fine but on page 3 vertical scrollbar crashes as soon as one tries to scroll, with follwoing
errror message:Microsoft JScript runtime error: 'children.0.children.0.children.1.children' is null or not an object. Horizontal scrollbar runs ok without any problme. While in preview mode and after deploying and viewing on server it does not crash. It crashes only while viewing on webpage in asp.net application.
By setting FixedHeader property to false the crashing behaviour is stopped.
But now how to achieve FixedHeader without crashing is question.
Any help to solve this problem will be highly appricated and I would like to thank you in advance.
Thank you.
Bharat Gadhia
This is a new problem to me, I have been running SQL Server 2000 with VS 2003 and last summer upgraded to SQL Server 2005 with VS 2005 - (both evaluation copies) all was fine
I bought the full upgrade of VS 2005 and SQL server dev edition in Dec 2006 and recently I have started to get a total system fallover dreadful noise followed by black screen and reboot.
This happens only when I view the Table Data "Show Table Data" in "Server Explorer" in VS2005, viewing design is OK, stored prcredures OK
I suspect this is either a hardware impending failure or software conflict but I would like some pointers please
I am using XP Pro sp2 with 1GB ram, F Secure Internet security, the Database is hosted externaly
I've have a question regarding MsSql. The thing is that I use an ordinary login page, (.aspx) that checks if a person types in right username and password against an table in MsSql.But with every succesfull login atempt it creates one or two processes in MsSql and wont take it away. It just stays in status "Sleeping". (I can see this in enterprise manager/Microsoft Sql servers/sql server group/management/current activity/process info)Should MsSql leave this processes in sleeping mode, and why does it do that?I do close all my connection to the database in my login page. But the processes just keeps building up. Does MsSql "clean" it selves up after a period of time or what is going on?IÂīll be very happy if anyone knows something about this and could tell me something about it.Best regardsTombola
View 2 Replies View RelatedNT server 4.0 crahsed. And there was no emergency repair disk. So, I copied all MS SQL server7.0 data files. After that i created new partition, formatted and installed Nt Server and SQL server 7.0. But how can i restore my old data? Please tell me what to do now?
View 1 Replies View RelatedHi all,
I recently upgraded to SQL 6.5- sp5a. I run DBCC TEXTALL as part of my nightly maintenance. Our db is about 3 GB and is heavy on text
fields. Since the upgrade, DBCC TEXTALL hangs up the server until I reboot it. The last message in the error log is "Warning:
out of RA slots... comfigure more RA slots." (or something like that). This never happened before.
BOL says don't monkey with the RA slots per thread, so
I've been adjusting the number of RA worker threads. I raise it, bounce SQL SERVER, and try to run the DBCC TEXTALL again.
Same results. Eventually I got up to 10 RA worker threads, at which point I got an "IO buf_wait" error, which also hung up the server.
I've read that increasing RA worker threads will eventually run you out of buffer space, and it looks like that's what happened.
I'm beginning to think that the problem isn't really with isn't really with the number of RA worker threads I have configured,
but rather with something that sp5a changed. Or maybe DBCC TEXTALL is running into some sort of corruption it can't handle...
Or something...
So, I'm reading up on the relationship between buffer cache, RA, etc., but
the sad fact is that information on that low down level is hard to find, and I don't understand most of it anyway.
Any suggestions, reading recommendations, comments, or jeers would be highly appreciated.
Hi all,
One of the Sql server crashed and when the server restart, the Store Procs have locked icon. Can't modify or do anything with it, but the proc still run. What could have cause this, and how can I remove the lock icon?
thanks
Hello,I have some code that uses ODBC to retreive column informationfrom a SQL Server database. The call to ::SQLColumns succeeds.I then bind my C variables to the HSTMT handle. I then call::SQLFetch to get the next row. ::SQLFetch crashes with anaccess violation. I am unable to debugThe same code works without issue against a MySQL database.Has anyone ever encountered this crash?Is there a work-around anyone knows of?Thank you very much for your help.
View 1 Replies View Related