Create A Condition For A DTS Task
Apr 11, 2007I simply want an email to go out if any records in a table exist, else no email. I have other steps completed in this DTS job but this is the last step. Any ideas?
ddave
ADVERTISEMENT
Please Help Create Trigger Condition On Update
Jun 24, 2008please help create trigger condition on update
IF EXISTS
(
SELECT *
FROM empList
WHERE (unit = 9)
)
begin
update [dbo].[empList]
set unit = CASE WHEN SELECT na,empID, unit
FROM empList
WHERE (empID IN (111, 222, 333, 555)) AND (unit = 9))
then '4' else t.fld1 end
i have an emmployee table
empid unit
------------------------------------------------------
1111 3
2222 9
3333 9
4444 2
5555 2
6666 1
7777 9
8888 2
9999 9
-----------------------------
i need help create trigger condition on update like this
ONLY ON
EMPID=2222,3333,7777,9999
WHAN ON UPDATE they have unit =9 THAN
I NEED THE trigger DO THIS
empid unit
------------------------------------------------------
1111 3
2222 4
3333 4
4444 2
5555 2
6666 1
7777 4
8888 2
9999 4
ONLY IF someone update EMPID=2222 OR 3333 OR 7777 OR 9999 and UNIT=9
THAN automatic change 9 TO 4
TNX for the help
Trying To Create A Proc That Will Insert Values Based On A Condition That Is Another Table
Feb 16, 2005Can someone give me a clue on this. I'm trying to insert values based off of values in another table.
I'm comparing wether two id's (non keys in the db) are the same in two fields (that is the where statement. Based on that I'm inserting into the Results table in the PledgeLastYr collumn a 'Y' (thats what I want to do -- to indicate that they have pledged over the last year).
Two questions
1. As this is set up right now I'm getting NULL values inserted into the PledgeLastYr collumn. I'm sure this is a stupid syntax problem that i'm overlooking but if someone can give me a hint that would be great.
2. How would I go about writing an If / Else statement in T-SQL so that I can have the Insert statement for both the Yes they have pledged and No they have not pledged all in one stored proc. I'm not to familar with the syntax of writing conditional statements within T-SQL as of yet, and if someone can give me some hints on how to do that it would be greatly appriciated.
Thanks in advance, bellow is the code that I have so far:
RB
Select Results.custID, Results.PledgeLastYr
From Results, PledgeInLastYear
Where Results.custID = PledgeInLastYear.constIDPledgeInLastYear
Insert Into Results(PledgeLastYr)
Values ('Y')
Reporting Services :: How To Create Multi-valued Parameter For Only One Specific Condition
Jul 21, 2015I have report where i should create a report which is multivalued parametr report,but here my condition is i want to see only one county name  in my output that is Ex: Asia Specific (CountryName),I dnt want to see the other Country names,So how should we create for this condition .
View 5 Replies View RelatedCan I Print The Results Of A Condition Based On The Condition?
Feb 9, 2006For example..
select * from mytable where MyNum = 7
If this brings back more than 1 row, I want to display a message that says,
Print 'There is more than one row returned'
Else (If only 1 row returned), I don't want to print anything.
Can I do this? Thx!
COndition Spli - Error Date Condition
Apr 19, 2007Dear friends,
I'm having a problem... maybe it's very simple, but with soo many work, right now I can't think well...
I need to filter rows in a dataflow...
I created a condition spli to that... maybe there is a better solution...
And the condition is: Datex != NULL(DT_DATE)
(Some DATE != NULL)
[Eliminar Datex NULL [17090]] Error: The expression "Datex != NULL(DT_DATE)" on "output "Case 1" (17123)" evaluated to NULL, but the "component "Eliminar Datex NULL" (17090)" requires a Boolean results. Modify the error row disposition on the output to treat this result as False (Ignore Failure) or to redirect this row to the error output (Redirect Row). The expression results must be Boolean for a Conditional Split. A NULL expression result is an error.
What is wrong??
Regards,
Pedro
Reporting Services :: SSRS IIF One Condition Or IIF Another Condition
Jun 22, 2015I am trying to write an visibility function to have message shown based on two different IIF conditions:
If behavior is to Add a customer ( if message =NAME ALREADY EXISTS, return " NAME ALREADY EXISTS",   otherwize return " NAME CREATED")If behavior is to Delete a customer (( if message =NAME DOES NOT EXIST, return "NAME DOES NOT EXIST",   otherwize return "NAME SUCCESSFULLY DELETED")
I tried the following which doesn't work:
=IIF((UCase(First(Fields!Message.Value, "DataSetName")) = "NAME ALREADY EXISTS"), "WARNING: NAME ALREADY EXIST", "NAMEÂ CREATED"),
IIF((UCase(First(Fields!Message.Value, "DataSetName")) = " NAME DOES NOT EXIST"), "WARNING: NAME DOES NOT EXIST", " NAME DELETED")
Cannot Create A Task With The Name .....
Aug 8, 2006I don't know if anyone is interested, but I was just struggling over an issue with a custom SSIS Control Flow Task and found that all referenced objects also have to be in the GAC to be able to create the custom object in the ssis designer. I guess that makes sense, but I searched all over for any reference to this error, and couldn't find anything. Hopes this sense for someone else!
View 2 Replies View RelatedTransact SQL :: How To Add Condition In Where Clause According To Another Condition
Oct 17, 2015I write a query to get some data as the following. but i need when a user check specified condition a query parameter change to specified condition :
create proc proc_ReservationDetails
(
@status nvarchar(50) = null
)
as
begin
select reservationId, reservationStatus, reservationDesc
[Code] .....
How To Create An FTP Task As A Scheduled Job?
Jun 13, 2002I need to use FTP task in DTS ( or any other way), but the problem is, the source file name is not constant. It changes every day with a date extension appended to the file name, like PO_2002_6_12_PM.zip. How do I create a task task to grab this file daily as a scheduled task? Any help is appreciated.
thanks.
Di.
Cannot Create A Custom Task
Apr 23, 2007I've gone through all the steps, and when I finally drag the custom task I've made into the control flow, I get the error
"Failed to create the task. ... Cannot create a task with the name "SSISExportToExcel.ExcelExport.ExcelExport, SSISExcelExport, ... Verify the name is correct"
Here's the beginning of my class... any help would be appreciated...
Namespace ExcelExport
<DtsTask(DisplayName:="Excel Export Task", _
Description:="Exports a SQL query results to an Excel Document")> _
Public Class ExcelExport
Inherits Task
....
Unable To Create A New Task Unless Use Wizard?
Dec 10, 2013I just started having an issue with maintenance tasks. When I click on one of my jobs to modify it I get the following error. Also I am unable to create a new task unless I use the wizard? Could not load file or assembly 'msddsp, Version=9.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified. (Microsoft.DataTransformationServices.Design)
Program Location:
at Microsoft.DataTransformationServices.Design.DtsComponentDiagram.CreateDdsView(Control parentControl)
at Microsoft.DataWarehouse.Controls.DdsDiagramHostControl.set_ComponentDiagram(ComponentDiagram value)
at Microsoft.DataTransformationServices.Design.DbMaintSequenceDesigner.get_DbMaintDiagramHost()
[code]....
Web Service Task Does Not Create Proper XML
Apr 12, 2007Hi all,
I have created a Web service and I want to call a single method from it to extract data. For this reason I use the SSIS "Web Service Task" . The problem is that the xml output file from the web service task does not look in the proper way. When I invoke my web service method in the browser the result looks like the following:
<?xml version="1.0" encoding="utf-8" ?>
- <ArrayOfBooking xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://tempuri.org/">
- <Booking>
<BookingDate>2007-04-12T15:19:01.6736072+03:00</BookingDate>
<FlightDate>2007-04-12T15:19:01.6736072+03:00</FlightDate>
</Booking>
- <Booking>
<BookingDate>2007-04-12T15:19:01.6736072+03:00</BookingDate>
<FlightDate>2007-04-12T15:19:01.6736072+03:00</FlightDate>
</Booking>
</ArrayOfBooking>
but when I use the web service task , the xml file produced, looks like the following:
<?xml version="1.0" encoding="utf-16"?>
<ArrayOfBooking xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" >
<Booking>
<BookingDate xmlns="http://tempuri.org/">2007-04-12T16:14:33.9210023+03:00</BookingDate>
<FlightDate xmlns="http://tempuri.org/">2007-04-12T16:14:33.9210023+03:00</FlightDate>
</Booking>
<Booking>
<BookingDate xmlns="http://tempuri.org/">2007-04-12T16:14:33.9210023+03:00</BookingDate>
<FlightDate xmlns="http://tempuri.org/">2007-04-12T16:14:33.9210023+03:00</FlightDate>
</Booking>
</ArrayOfBooking>
My problem is that I cannot create a xsd schema for the xml file output from the "web service task", and because of this I cannot insert the data in the xml file into the Database, because the xsd schema is reqired by the XML Source which I use in my DataFlow task for inserting the data.
Do you have any ideas how to solve this strange problem?
Regards,
pc
Variable To Create A Table In A SQL Task
Nov 6, 2007Hi
I need to create a Table using the SQL Task and a Variable as the Table Name
I am getting an Error: "Syntax error or access violation". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
The SQL Statement that I am using is
Create Table ? (ColumnA char(5) Null)
The ? is the Value of the Variables
Is there a way of doing this
RegardsQ
Task To Create And Drop Tables
Apr 12, 2006I have a package that i want to move between enviroments. Therefor i need to create a package that creates all my tables on the new server.
like
-- "if exists (select * from dbo.sysobjects where id = object_id(N'[table]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)
drop table [table]
GO"
The case is that i have around 30 tables, and my question is therefore
I know that you can create the drop and create script for one table at the time in the SQL Server Management Studio, but is there an easier way to do this
IDtsPipelineEnvironmentService Failed To Create Task.
Nov 2, 2007If I try to create open a .dtsx package I get the following error:
TITLE: Microsoft Visual Studio
------------------------------
Failed to create the task.
------------------------------
ADDITIONAL INFORMATION:
Could not load type 'Microsoft.SqlServer.Dts.Design.IDtsPipelineEnvironmentService' from assembly 'Microsoft.SqlServer.Dts.Design, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91'. (Microsoft.DataTransformationServices.Design)
------------------------------
BUTTONS:
OK
------------------------------
This also happens if I create a new SSIS project and try to add a data flow.
I have SQL 2005 Service pack 2 loaded and it's running on Windows Server 2003 with the latest service packs.
This was working a few weeks ago and then quit? Any ideas?
Create Directory With A File System Task
Sep 13, 2006Hi!
I'm having a bit of a problem implementing a File System Task to Create a directory and would appreciate some help if possible.
I want to create a date directory so I can move files to once they are imported successfully. The date portion for the directory comes from the import file whose name is variable and in the format of PerfLog_<yyyymmdd>.aud. So, in essence, if I am processing a file named Perflog_20060913.aud, when I am done processing it I want to create a directory c:myprog20060913 and move my processed file there.
Can anyone help me? Please.
Integration Services :: Script Task - Create Excel Using C#?
Jun 6, 2015I need to create excel workbook "SalesData.xlsx', which should have worksheet "POS". After creating excel file in specific location, script should be able to format cells as well.For instance, first two column type should be numbers. Here are the columns:
ColumnName : Type
Id : Number
AccountNumber : Number
Name: Text
Address: Text
Also, it checks for existing file . If it exist, then overwrite the file.
Create A Seperate Thread For A Winform In Script Task?
Nov 7, 2006In order to provide runtime, realtime, graphical feedback to ETL operators, I am planning to open a new winform when my packages start, and update the form via polling of events.
It is my understanding that this means I need to create a new thread for the winform from within the script task. Anyone done this via script task yet? Any reason why this couldn't work or shouldn't be done from the script task?
Would I be better off writing the winform app completely seperately and simply call it from an "execute process" task?
Thanks,
Ken
SSIS - Failed To Create The Task. (Microsoft Visual Studio)
Apr 9, 2008I have created one Custom Task in SSIS. Basically I have one solution and 2 class library project one for Task and one for UserInterface
when i try to drag new task from tool box it says following errror
===================================
Failed to create the task. (Microsoft Visual Studio)
===================================
The task editor of the type 'CustomErrorControl.CustomControlnew,CustomErrorControl,Version=1.0.0.0,Culture=Neutral,PublicKeyToken= 0c2b681d5171851e' is not installed correctly. (Microsoft.DataTransformationServices.Design)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.762&EvtSrc=Microsoft.DataTransformationServices.Design.SR&EvtID=TaskEditorNotProperlyInstalled&LinkId=20476
------------------------------
Program Location:
at Microsoft.DataTransformationServices.Design.DtrTaskDesigner.InitializeTaskUI()
at Microsoft.DataTransformationServices.Design.DtrTaskDesigner.OnNewTaskAdded()
at Microsoft.DataTransformationServices.Design.DtsBasePackageDesigner.CreateExecutable(String moniker, IDTSSequence container, String name)
CustomErrorControl is my name space and CustomControlNew is my class name.
does it TypeName should appear like what i have?
I have unstalled it and try to reinstall it. change the stong name key and they try again but somehow same error..
Please help..
Send Mail Task - Would Like To Create Custom Subject Line
May 23, 2007Hi,
I imagine this will be done through the use of expressions.
What I would like to do is this. When my package fails, it's set up to send an email using the Send Mail Task.
I would like to create a custom subject line that contains:
1.) Name of the package
2.) Name of the task that failed (if possible)
I am seriously wondering how I can do this.
Thanks much
Error When Using A Create Table Execute SQL Task Statement In Control Flow Prior To Using An OLE DB Destination Container...
May 18, 2008SSIS Newbie Question:
I have a simple Control Flow setup that checks to see if a particular table exists. If the table does not exists, the table is created in an alternate path, if it does exist, the table is truncated before moving to a file import Data Flow that uses an OLE DB Destination to output the imported data.
My problem is, that I get OLE DB package errors if the table the OLE DB Destination Container references does not exist when I load the package.
How can I over come this issue? I need to be able to dynamically create the table in an earlier step, then use that table to import data into in a later step in the workflow.
Is there a switch I can use to turn off checking in the OLE DB Destination Container so that it will allow me to hook up the table creation step?
Seems like this would be a common task...
Steps:
1. Execute SQL Task to see if the required table exists
2. Use expresions to test a variable to check the results of step 1
3. If table exists, truncate the table and reload it from file in Data Flow using OLE DB Destination
4. If table does not exist, 1st create it, then follow the normal Data Flow
Can someone help me with this?
Signed: Clueless with a deadline approaching...
Send Mail Task Problem Using A Combination Of ForEach Loop, Recordset Destination, Execute SQL Task And Script Task
Jun 21, 2007OK. I give up and need help. Hopefully it's something minor ...
I have a dataflow which returns email addresses to a recordset.
I pass this recordset into a ForEachLoop configuring the enumerator as (Foreach ADO Enumerator). I also map the email address as a variable with index 0.
I then have a Execute SQL task which receives this email address as a varchar variable (parameter 0) which I then use in my SQL command to limit the rows returned. I have commented out the where clause and returned all rows regardless of email address to try to troubleshoot this problem. In either event, I then use a resultset to store the query result of type object and result name 0.
I then pass this resultset into a script variable to start parsing the sql rows returned as type object. ( I assume this is the correct way to do this from other prior posts ...).
The script appears to throw an exception at the following line. I assume it's because I'm either not passing in the values properly or the query doesn't return anything. However, I am certain the query works as it executes just fine at the command prompt.
Try
ds = CType(Dts.Variables("VP_EMAIL_RESULTS_RS").Value, DataSet)
My intent is to email the query results to each email address with the following type of data by passing the parsed data from the script to a send mail task. Email works fine and sends out messages but the content is empty. I pass the parsed data as string values to the messagesource and define the messagesourcetype as a variable in the mail task.
part number leadtime
x 5
y 9
....
Does anyone have any idea what I might be doing wrong?
thanks
John
How To Script A &"create Alias&" Task
Jan 11, 2008Hi ppl
I'm building a simple SSIS that t reads data from a flat file and appends it to a table. The problem is that the file has no headers and it has a considerable amount of columns.
I need to make a column mapping between "column 1" in the file and the actual column name in the table.
To avoid doing it one by one, I was thinking on introducing a script in the data pipeline to change the aliases of the columns of the file.
The problem is the script designer is in VB and I'm not proficient with that.
Can any one tell me what is the VB statement to change the name of the column, or educate me on an alternative way to do it?
This was easy in sql2000 but I can't find a way to do it in sql2005
Many Thanks
JR
An Easy Way To Reference The Nth Row From A Table Meeting A Condition X, And The Mth Row From The Same Table Meeting Condition Y
May 10, 2006Hi
I am developing a scientific application (demographic forecasting) and have a situation where I need to update a variety of rows, say the ith, jth and kth row that meets a particular condition, say, x.
I also need to adjust rows, say mth and nth that meet condition , say y.
My current solution is laborious and has to be coded for each condition and has been set up below (If you select this entire piece of code it will create 2 databases, each with a table initialised to change the 2nd,4th,8th and 16th rows, with the first database ignoring the condition and with the second applying the change only to rows with 'type1=1' as the condition.)
This is an adequate solution, but if I want to change the second row meeting a second condition, say 'type1=2', I would need to have another WITH...SELECT...INNER JOIN...UPDATE and I'm sure this would be inefficient.
Would there possibly be a way to introduce a rank by type into the table, something like this added column which increments for each type:
ID
Int1
Type1
Ideal Rank by Type
1
1
1
1
2
1
1
2
3
2
1
3
4
3
1
4
5
5
1
5
6
8
2
1
7
13
1
6
8
21
1
7
9
34
1
8
10
55
2
2
11
89
1
9
12
144
1
10
13
233
1
11
14
377
1
12
15
610
1
13
16
987
2
3
17
1597
1
14
18
2584
1
15
19
4181
1
16
20
6765
1
17
The solution would then be a simple update based on an innerjoin reflecting the condition and rank by type...
I hope this posting is clear, albeit long.
Thanks in advance
Greg
PS The code:
USE
master
GO
CREATE DATABASE CertainRowsToChange
GO
USE CertainRowsToChange
GO
CREATE TABLE InitialisedValues
(
InitialisedValuesID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL
)
GO
CREATE PROCEDURE Initialise
AS
BEGIN
INSERT INTO InitialisedValues (Int1 )
SELECT 2
INSERT INTO InitialisedValues (Int1 )
SELECT 4
INSERT INTO InitialisedValues (Int1 )
SELECT 8
INSERT INTO InitialisedValues (Int1 )
SELECT 16
END
GO
EXEC Initialise
/*=======================================================*/
CREATE TABLE AllRows
(
AllRowsID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL
)
GO
CREATE TABLE RowsToChange
(
RowsToChangeID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL
)
GO
CREATE PROCEDURE InitialiseRowsToChange
AS
BEGIN
INSERT INTO RowsToChange (Int1 )
SELECT 2
INSERT INTO RowsToChange (Int1 )
SELECT 4
INSERT INTO RowsToChange (Int1 )
SELECT 8
INSERT INTO RowsToChange (Int1 )
SELECT 16
END
GO
EXEC InitialiseRowsToChange
GO
CREATE PROCEDURE PopulateAllRows
AS
BEGIN
INSERT INTO AllRows (Int1 )
SELECT 1
INSERT INTO AllRows (Int1 )
SELECT 1
INSERT INTO AllRows (Int1 )
SELECT 2
INSERT INTO AllRows (Int1 )
SELECT 3
INSERT INTO AllRows (Int1 )
SELECT 5
INSERT INTO AllRows (Int1 )
SELECT 8
INSERT INTO AllRows (Int1 )
SELECT 13
INSERT INTO AllRows (Int1 )
SELECT 21
INSERT INTO AllRows (Int1 )
SELECT 34
INSERT INTO AllRows (Int1 )
SELECT 55
INSERT INTO AllRows (Int1 )
SELECT 89
INSERT INTO AllRows (Int1 )
SELECT 144
INSERT INTO AllRows (Int1 )
SELECT 233
INSERT INTO AllRows (Int1 )
SELECT 377
INSERT INTO AllRows (Int1 )
SELECT 610
INSERT INTO AllRows (Int1 )
SELECT 987
INSERT INTO AllRows (Int1 )
SELECT 1597
INSERT INTO AllRows (Int1 )
SELECT 2584
INSERT INTO AllRows (Int1 )
SELECT 4181
INSERT INTO AllRows (Int1 )
SELECT 6765
END
GO
EXEC PopulateAllRows
GO
SELECT * FROM AllRows
GO
WITH Temp(OrigID)
AS
(
SELECT OrigID FROM
(SELECT Row_Number() OVER (ORDER BY AllRowsID Asc ) AS RowScore, AllRowsID AS OrigID, Int1 AS OrigValue FROM Allrows) AS FromTable
INNER JOIN
RowsToChange AS ToTable
ON FromTable.RowScore = ToTable.Int1
)
UPDATE AllRows
SET Int1=1000
FROM
Temp as InTable
JOIN Allrows as OutTable
ON Intable.OrigID = OutTable.AllRowsID
GO
SELECT * FROM AllRows
GO
USE
master
GO
CREATE DATABASE ComplexCertainRowsToChange
GO
USE ComplexCertainRowsToChange
GO
CREATE TABLE InitialisedValues
(
InitialisedValuesID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL
)
GO
CREATE PROCEDURE Initialise
AS
BEGIN
INSERT INTO InitialisedValues (Int1 )
SELECT 2
INSERT INTO InitialisedValues (Int1 )
SELECT 4
INSERT INTO InitialisedValues (Int1 )
SELECT 8
INSERT INTO InitialisedValues (Int1 )
SELECT 16
END
GO
EXEC Initialise
/*=======================================================*/
CREATE TABLE AllRows
(
AllRowsID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL,
Type1 int NOT NULL
)
GO
CREATE TABLE RowsToChange
(
RowsToChangeID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL,
Type1 int NOT NULL
)
GO
CREATE PROCEDURE InitialiseRowsToChange
AS
BEGIN
INSERT INTO RowsToChange (Int1,Type1 )
SELECT 2, 1
INSERT INTO RowsToChange (Int1,Type1 )
SELECT 4, 1
INSERT INTO RowsToChange (Int1,Type1 )
SELECT 8, 1
INSERT INTO RowsToChange (Int1,Type1 )
SELECT 16, 1
END
GO
EXEC InitialiseRowsToChange
GO
CREATE PROCEDURE PopulateAllRows
AS
BEGIN
INSERT INTO AllRows (Int1, Type1 )
SELECT 1, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 1, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 2, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 3, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 5, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 8, 2
INSERT INTO AllRows (Int1, Type1 )
SELECT 13, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 21, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 34, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 55, 2
INSERT INTO AllRows (Int1, Type1 )
SELECT 89, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 144, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 233, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 377, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 610, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 987, 2
INSERT INTO AllRows (Int1, Type1 )
SELECT 1597, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 2584, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 4181, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 6765, 1
END
GO
EXEC PopulateAllRows
GO
SELECT * FROM AllRows
GO
WITH Temp(OrigID)
AS
(
SELECT OrigID FROM
(SELECT Row_Number() OVER (ORDER BY AllRowsID Asc ) AS RowScore, AllRowsID AS OrigID, Int1 AS OrigValue FROM Allrows WHERE Type1=1) AS FromTable
INNER JOIN
RowsToChange AS ToTable
ON FromTable.RowScore = ToTable.Int1
)
UPDATE AllRows
SET Int1=1000
FROM
Temp as InTable
JOIN Allrows as OutTable
ON Intable.OrigID = OutTable.AllRowsID
GO
SELECT * FROM AllRows
GO
Integration Services :: Stored Procedure In Execute Task Fails But Task Does Not Fail
Jul 1, 2015I'm using SSIS in Visual Studio 2012. My Execute SQL Task calls a Stored Procedure where I have a TRY-CATCH. Last week there was a problem and the CATCH was executed and logged an error to my error table, but for some reason the Execute SQL Task didn't fail. Is there a setting to make the Execute SQL Task fail when an SP encounters a failure?
View 3 Replies View RelatedError: The Task With The Name Data Flow Task And The Creation Name DTS.Pipeline.1 Is Not Registered For Use On This Computer
May 4, 2006
Hi,
I am trying to create a simple BI Application for SSIS. In Visual Studio 2005 I just get a Data Flow Task from the toolbar and add it to the project. When I double click it I get the following error:
The task with the name "Data Flow Task" and the creation name "DTS.Pipeline.1" is not registered for use on this computer.
Then when I try to delete it it gives this other error:
Cannot remove the specified item because it was not found in the specified Collection.
I am creating this application in an administrator account in this computer, so I doubt the problem is related to permissions. I am running SQL Server 2005 and Visual Studio 2005 in WinXP Tablet PC Edition.
Any suggestions why this is happening and how to fix it?
SSIS Task Transfer SQL Server Objects Task And Default Constraints On Tables
Feb 21, 2008
I am using the "Transfer SQL Server Objects Task" to copy some tables from database A to database B including data.
The tables, primary key constraints, Foreign key, data and all transfers nicely except for "DEFAULT CONSTRAINTS" on the tables.
I have failed to find any option in the "Transfer SQL Server Objects Task" task to explicitly say "copy default constraints". So I guess logically it should happen automatically but it doesn't. I hope it is not a bug :-)
Any option anyone knows will help.
Thanks.
Compare Performance (Execute SQL Task Insert And Data Flow Task)
Mar 12, 2008
I am using SQL 2005 SSIS. I am joining several large tables and then the move result into another table in the same database.
I would like know which method is faster:
Use Execute SQL Task to insert the result set to the target table
Use the Data Flow Task to insert the result set to the target table. (Use OLE DB source to execute SQL command and then use the SQL destination)
Could you tell me why then other is slower?
Thanks.
Execute SQL Task – Output Parameter On Stored Procedure Causes Task To Fail.
Dec 2, 2005I have a SQL Task that calls a stored procedure and returns an output parameter. The task fails with error "Value does not fall within the expected range." The Stored Procedure is defined as follows: Create Procedure [dbo].[TestOutputParms] @InParm INT , @OutParm INT OUTPUT as Set @OutParm = @InParm + 5 The task uses an OLEDB connection and has a source type of Direct Input. The SQL Statement is Exec TestOutputParms 7, ? output The parameter mapping is: Variable Name Direction Data Type Parameter Name User::OutParm Output LONG @OutParm
View 7 Replies View RelatedWriting Full Result Set From Execute SQL Task Into A File Using Script Task
Mar 28, 2007In the Control flow tab, I have an Execute SQL Task that outputs full Result set into a variable of an object type. Now how can I write the contents of the Full Result Set into a text file using Script Task. I also want to format the following way while I output into a file:
Column Name 1 : Column Value
Column Name 2: Column Value and so on
I tried writing the contents of the Object Variable into a file, but the file had an output of single word: System.__ComObject.
Code for Writing the Full Result Set into a Text File
Dim RSsqloutput as String = Dts.Variables("objVariable").Value.ToString
Dim strVal as String = "File completed on " & Now() & vbCrLf & "------------------------------------------------------" & vbCrLf
oLogFile.WriteAllText("C:MyFile.txt", strValue)
oLogFile.WriteAllText("C:MyFile.txt", rsSQLOutput)
I went through this link that explains how to write XML Result Set into a File, But this doesn't help as it writes in XML format.
Would you please give me a hint of code how I can go upon.
SSIS (Integration Services) Transfer SQL Server Objects Task: This Task Can Not Participate In A Transaction
Feb 1, 2007In short, does the €œTransfer SQL Server Objects Task€? support distributed transactions?
In trying to use a €œTransfer SQL Server Objects Task€? in a container using a transaction on the container. The task is set to support the transaction. It is setup to copy table data from several tables from a non-domain server (sql server 2000) to a domain-based server (sql server 2005). I get an error stating, €œThis task can not participate in a transaction€?.
I am wondering if it means exactly what it says €“ this task in SSIS can€™t participate at all. Or does it mean that it won€™t in this scenario for some reason. I attempted a simple copy of data from mssql 2005 to mssql 2005 (same server) and the task still failed). MSDTC appears to be running properly on my machine and such (I can do a simple distributed transaction across linked server to the 2000 server in Query Analyzer (QA)). Also, MSDTC appears to be working on both servers with distributed transaction query tests in QA.
Here€™s the error info€¦
SSIS package "Development BusinessContacts and Products Migration.dtsx" starting.
Information: 0x4001100A at Copy BusinessContacts Data: Starting distributed transaction for this container.
Error: 0xC002F319 at Copy BusinessContacts database table data 1, Transfer SQL Server Objects Task: This task can not participate in a transaction.
Task failed: Copy BusinessContacts database table data 1
Information: 0x4001100C at Copy BusinessContacts database table data 1: Aborting the current distributed transaction.
Information: 0x4001100C at Copy BusinessContacts Data: Aborting the current distributed transaction.
SSIS package "Development BusinessContacts and Products Migration.dtsx" finished: Failure.
The program '[4700] Development BusinessContacts and Products Migration.dtsx: DTS' has exited with code 0 (0x0).
How To Fetch The Recrods From MS Access And Using It In Script Task Using Control Flow Tools(Execute SQL Task)
Jun 14, 2006Hi
I have an application like fetching records from the DataBase(MS Access 2000) and results i have to use in Script Task. At present i have used the record fetching query,connection string in Script itself. I would like to use in Independently. Is there any Tools like (Control Flow Tools like Execute SQL Task) are there to fetch the result set from Acccess and can use the fetching results in Script Task....
Thanks & Regards
Deepu M.I