Hi
I wonder if it is possible to create a dataset in code and then feed it to a Reporting Svcs (RS) report and have it rendered on the data from this dataset.
My collegues does this with Crystal and it would break my heart if I cant do this with (RS)...
I have tried to find a solution but so far, no luck.
Anyone have any ideas?
/F
Hello all!
I have a question. I have report that have defined dataset. Can I somehow get access to data in this dataset from this report in Code section?
I need to write function that will return value from one field based on 45 parameters (they are values from 4 fields in this datset), like:
dataset fields:
RYear, RMonth, AYear, AMonth, CAtegory, Amount.
I need to get Amount based on RYear, RMonth, AYear, AMonth, Category values that I need to pass as parameters to functions.
Thank you
Hello,
We are trying to convert our Crystal XI reports to SQL Reporting Services 2005. Our crystal reports get their data from ADO datasets which are populated through code at run time. Is it possible to do this in SQL Reporting Services?
The only options for a dataset seem to be query and stored procedure. When i have a blank dataset it throws an error. When i try to link my dataset to code, it throws an error.
Thanks for your help!
We have built an analytics solution in Analysis Services with the following setup:
1) FactTable = Customer transactions
2) DimCustomerClassificationTable = For a customer over a trailing twelve month period, we have pre-calculated a series of segmentations such as their revenue segment at a Worldwide Level, Region Level, SubRegion Level, or Country Level, their product classification (e.g., what are they mainly buying) at a Worldwide Level, Region Level, SubRegion Level, or Country Level etc. For each combination of a customer and country over a trailing twelve month period, we have one dimension table record that has their segmentation classifications at each geography level.
3) DimTime = Allows a user to select a trailing twelve month time period
4) DimSalesLocation = the hierarchy of sales organization locations (Worldwide, Region, SubRegion, Country) credited with the sale to the customer
Ideally, we would like to create calculated members on the DimCustomerClassification dimension that would assume the value of the correct segmentation field based on a user's selection (e.g., if they has selected a country, we would have one calculated member called Revenue Segment that assumes the value of Revenue Segment Country, if they selected a SubRegion, it would assume the value of Revenue Segment SubRegion, etc.), but we are not sure if this is possible.
If this isn't possible, what would be the best approach to address this?
Thanks in advance for your help!
I've got a SQL Reporting Server 2000 SP2 report that takes 3 parameters. FromDT, ToDT, and LocationCD. The first two parameters are free form text fields that expect a date. The last one is a drop down box. For some reason, when I'm viewing the report through the standard reports folder on the report server I have to click the "View Report" button two times to get the report to render. Clicking it just once, doesn't seem to do anything. The report is a line graph.
There are default values in the FromDT and ToDT parameter fields.
Anyone have any ideas what would be causing the need for the second click?
Hello All,
I have a report which throwing this error:
Cannot read the next data row for the data set ALERTSBYSERVERS. (rsErrorReadingNextDataRow) Get Online Help
Arithmetic overflow error converting expression to data type datetime
This report can be viewed on the Visual Studio, but is not rendering it on the Reporting console. Any ideas??
Mannu.
Is there any way to display this information in the report?
Thanks
Hi,
Can anybody tell me if it's possible to set a report to render directly to PDF please. I've found stuff on how to do it via a url but that's not how we want to do it.
Thanks in advance
Steve
I've got a complex report with many subreports that is running on a reporting services 2005 machine with sp2 installed. The report was working well, producing a 2800 page report in under 10 minutes. I made a change to an expression in a table's column header and one change to the detail and the report stopped working. It would just hang for hours with no messages in the logs.
I tried to simplify what the report server had to do by removing the sum's to the database side's stored proc but that didn't work. I finally managed to get the report to work by removing a totals section to a subreport. I've also had the same hanging condition occur when I merged some columns in the table. I also found a workaround for this problem.
Is anyone else finding problems like this? They don't seem to be code related.
Is there a limit to how complex a report can be in reporting services or the PDF rendering part of the process?
Thanks for any info
Hi,
Why is taking so long to open/create/render the reports for the first time? Is there any configuration to change this? I don€™t think this behavior is related to Report Execution or cache! I think there is something else going on! Thanks.
I seem to be unable to pass parameters from a VB .Net application to Reporting Services.
Before I added the parameters to the query, I got all the rows back. So I know the application is basically working. Now that I have added the parameters, I get nothing.
I thought the SetExecutionParameters function would help, but my syntax is wrong and it fails.
I would appreciate any hint as to what step I am missing.
Report setup:
Parameters
Name Value
@Report =Parameters!Report.Value
@Corp =Parameters!Corp.Value
@Dept =Parameters!Dept.Value
Query conditions
WHERE Report = 'BudgetVarianceSummary'
AND PeriodEnd = CONVERT(DateTime,CONVERT(char,GETDATE()- DATEPART(day,GETDATE()),112))
AND Report = @Report
AND Corp = @Corp
AND Dept = @Dept
VB Code snippet:
Dim reportPath As String = "/FinancialReports/BudgetVarianceSummary"
Dim format As String = "PDF"
' Prepare report parameter.
Dim parameters(3) As ParameterValue
parameters(0) = New ParameterValue()
parameters(0).Name = "Report"
parameters(0).Value = "BudgetVarianceSummary"
parameters(1) = New ParameterValue()
parameters(1).Name = "Corp"
parameters(1).Value = "10"
parameters(2) = New ParameterValue()
parameters(2).Name = "Dept"
parameters(2).Value = "7255"
Dim execInfo As New ExecutionInfo
Dim execHeader As New ExecutionHeader()
Dim SessionId As String
Dim extension As String = ""
rs.ExecutionHeaderValue = execHeader
execInfo = rs.LoadReport(reportPath, historyID)
'This line of code fails
'rs.SetExecutionParameters(parameters, "en-us")
result = rs.Render(format, devInfo, extension, encoding, mimeType, warnings, streamIDs)
I am trying to redo an app that I built to gen reoprts from the command line in a specified format using RS 2000 to use RS 2005. However, I am having a problem using rs.exe to render a report. It looks like the rs.Render method no longer exists. It also looks like you can no longer get to these methods from the rs.exe environment.
Is it still possible to render reports using rs.exe? If so, can somebody please provide an example?
Thank you in advance.
We have written a C# program in which we want to execute a SQL Report and return the report as a PDF
When we execute our code we get a message that System.Web.Services.Protocols.SoapException: The item '/production/Sudhir' cannot be found. --->
What Is syntax for ReportExecutionService.render(string report)
How do we define the string report?
ReportService.ReportingService rs = new ReportService.ReportingService();
rs.Credentials = System.Net.CredentialCache.DefaultCredentials;
Byte[] result;
string encoding;
string mimetype;
//ParameterCollection[] parametersUsed = null;
ParameterValue[] parametersUsed = null;
Warning[] warnings = null;
string[] streamids;
result = rs.Render("/production/Sudhir", "PDF", null, null, null, null, null, out encoding, out mimetype, out parametersUsed, out warnings, out streamids);
//System.Web.Services.h Response.ClearContent();
Response.AppendHeader("content-length", result.Length.ToString());
Response.ContentType = "application/pdf";
Response.BinaryWrite(result);
Response.Flush();
Response.Close();
Hi All,
I have 2 reports that report on baiscally the same thing, just group differently.
Report 1 groups summary phone call stats by Department, Day, and Hour - which are all drop down options.
This means that the department summary stats are shown when the reports are rendered and can be expanded to see daily stats ... the daily stats can then be expanded to see the hourly stats.
Kinda Like:
-------------------------
-Department 1
-10/1/2007
12:00 AM
1:00 AM
+10/2/2007
+Department 2
-------------------------
Report 2 shows the same summary stats by department and extension - which is also a drop down option.
This means that the department summary stats are shown when the reports are rendered and can be expanded to see summary stats for each extension.
Kinda Like:
-------------------------
-Department 1
Ext 2005
Ext 2008
+Department 2
-------------------------
The queries for these reports run from the Management Studio in about 10 seconds each with the Report 1 query returning about 800 rows for the month of October 2007 and the Report 2 query returning about 30 rows for the same date range.
When the reports are rendered, Report 1 (with 800 rows) is rendered in about 20 seconds, while Report 2 (with only 30 rows) takes about 5 minutes to render.
The reports themselves are very similar, with the only difference being the grouping. It is weird that the report that returns the samller Dataset is actually taking longer to render.
One thing I did try was running the queries from the Data tab of the .rdl files (in visual studio) and the query for Report 2 took about 4 minutes to return data, while (as I mentioned above) it ran in about 10 seconds in Management Studio.
Has anyone else run into this?
Any suggestions?
Thanks in advance!
-Matt
Hi,
I want to display a varbinary field in the reports. the field contains value "<B> example </B>. When viewed in report viewer, it displays the value as such.
How to render it as html output?
thanks.
I know I can display the time that the report was generated, but can I display how LONG it took for the report to complete?
From when the first query was executed to the time all the data was returned and/or the time it took for the report to be rendered back to the end user?
Thanks!
Hi,
I am trying to export a report into a format whiich I will then allow the user to make some final editions to prior to printing. Apparently LocalReport>Render does not support word format, however is supports others, what is the best format for me to export a report out into in order to then allow the user to edit it prior to printing, Ideally I would have just liked to lauch ms word and allow the user to edit the report if disired prior ro printing, but if I first export to .mhtml it seems to mess the column widths of the report up when opened in word..
Thanks,
Hi,
We have a solution where we from a Windows application (using the report viewer control SP1) display some reports. Some of the reports uses a custom report item to display some graphics. This works fine on a lot of different installations, but now (for some reason) we have a problem at one customer.
We get strange GDI and transport errors when rendering these reports:
"Unable to read data from the transport connection: The connection was closed."
or
"Remote GDI stream version: 10.0.1. Expected version 10.0.1. Offset and length were out of bounds for the array or count is greater than the number of elements from the index to the end of the source collection."
These report work fine when you run them in the browser, but they never work in the report viewer control...
Please provide some help.
Kind Regards
Sune
Is it possible to to render direct to PDF when viewing the report url?
View 7 Replies View RelatedI have set up a test subscription that sends an email that includes both the report and the url link to the report. However, the report does not render when user clicks on url link in subscription email. The parameter toolbar sorta appears at top of page but buttons are not showing correcty. I saw similiar issue posted in another forum but no one had resolved yet. We all noticed that the subscription email uses /reportserver folder instead of /Reports folder.
The report does appear fine in the email so I believe the problem is the URL.
Can anyone tell me how to resolve?
Thanks,
Tammy
The URL from Report Manager is
http://dss0vw037.svr.us.jpmchase.net/Reports/Pages/Report.aspx?ItemPath=%2fIOC+Metrics%2fDCS+Emergency+Contact+List
The URL in subscription email
http://dss0vw037.svr.us.jpmchase.net/reportserver?%2fIOC+Metrics%2fDCS+Emergency+Contact+List&rs%3aParameterLanguage=en-US
Hello;
There is any way to put a name to each sheet when using Render Format to Excel file?
Thanks
Luis
I am wondering if anyone knows how to change the sheet names in Excel when exporting a report from Reporting Services 2005. In other words, I have a report with approximately 5 page breaks built in. When I render the report to Excel, it creates the 5 sheets as I expect, but it names them "Sheet1", "Sheet2", "Sheet3" etc... Is there a way to specify the name of the sheets? I am currently using a different table in my report for each sheet, but I am open to structuring this differently if needed.
View 9 Replies View RelatedHi,
I have an application wherein I need to generate a single report(possibly in PDF format) which contains more than one report. Iam using SSRS 2005. In my application Iam using report server url to render reports. The below is URL for rendering single report.
http://servername/ReportServer/Pages/ReportViewer.aspx?reportname&rs%3aCommand=Render&rs%3aFormat=HTML4.0&rc%3aToolbar=true
Is it possible to render multiple reports into a single report ?
Can anyone help me in this regard ?
Thanks,
S V Ramakrishna
Hi,
I am sure there is a thread about that one but I cannot find it.
I have a server which does not include the correct link with the subsciptions.
I create a subscription and ask to include the link to the reporet, I get the report with the machine name instead of the DNS name.
i.e. i get
The report is accessible at the following address:
http://atlanta/reportserver/...
instead of http://reporting.onsemi.com/reports/....
I tried to edit rswebapplication.config like that
<ReportServerUrl>reporting.onsemi.com</ReportServerUrl>
and rsreportserver.config like that
<DefaultHostName>onsemi.com</DefaultHostName>
but still cannot get the correct URL in the subscription.
Any idea?
Thanks,
Philippe
I have searched many forums and found some cases of people also reporting slower rendering in RS than in Management Studio / Query Analyzer. However, none of the other solution suggestions seem to make a difference for me.
I'm a VS/VB developer and have got multiple reports built -- all using stored procedures on the backend -- that all take many times longer to run than if executed via Management Studio (SSMS). My simplest proc takes a couple of parameters (no defaults included) and does a simple select against one table with a few joins. Nothing complicated. It runs in 8 secs for 6867 rows via SSMS. Through RS (running locally through Visual Studio 2005 at this point) it takes around 25-28 secs. Yet, when I'm in the report on the DATA tab (not the PREVIEW tab) the run takes the expected 8 secs ?!?!
All reports are behaving this way.
I am not using cursors.
I have no default values on parameters.
I have added the "WITH RECOMPILE" to the proc statement.
I have "SET NOCOUNT ON" as the first line of the proc.
I hate to say this, but I even connected the proc to Crystal Reports to see how it behaved. It ran in the expected 8 secs.
I've seen some mention by someone that perhaps this is a known issue of RS that it reads the proc twice. Any truth to this?
Also a couple posts have traced and demonstrated that the report is generating significantly more data "reads" via RS than through SSMS.
We're a shop that is considering a switch from Crystal to RS, but we do everything through stored procedures. I need to clear up this issue before I can go forward recommending a switch. I'm including a copy of a typical proc below for review... What am I missing? What's the deal here with RS?
IF OBJECT_ID('dbo.rpt_InactiveAccounts') IS NOT NULL
DROP PROCEDURE dbo.rpt_InactiveAccounts
GO
CREATE PROCEDURE dbo.rpt_InactiveAccounts
(@pRunDate datetime
,@pSalesperson varchar(5000)
,@pIncludeOpen char(1)
)
WITH RECOMPILE
AS
SET NOCOUNT ON
SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED
-- CREATE/SETUP TEMP TABLE FOR USE IN PARSING MULTI-VALUED STRING INPUTS
DECLARE @NumberPivot TABLE (NumberID INT PRIMARY KEY)
DECLARE @intLoopCounter INT
SELECT @intLoopCounter =0
WHILE @intLoopCounter <=4999 BEGIN
INSERT INTO @NumberPivot
VALUES (@intLoopCounter)
SELECT @intLoopCounter = @intLoopCounter +1
END
-- CREATE TEMP TABLES TO HOLD PARSED VALUES FROM MULTI-VALUE STRING INPUT PARAMETERS
DECLARE @SalespersonTable TABLE
(tmpSalesperson varchar(30))
-- PARSE OUT @pSALESPERSON PARAMETER AND STORE VALUES IN TEMP TABLE
INSERT INTO @SalespersonTable
SELECT SUBSTRING(',' + @pSalesperson + ',', NumberID + 1,
CHARINDEX(',', ',' + @pSalesperson + ',', NumberID + 1) - NumberID -1)
FROM @NumberPivot
WHERE NumberID <= LEN(',' + @pSalesperson + ',') - 1
AND SUBSTRING(',' + @pSalesperson + ',', NumberID, 1) = ','
SELECT DISTINCT
CASE
WHEN s.Name IS NULL THEN '<< OPEN >>'
ELSE s.Name
END As SalespersonName
,c.ClassId
,c.CustId
,c.Name
,c.Addr1
,c.Addr2
,c.Addr3
,c.City
,State
,CASE
WHEN Len(c.Zip) = 9 And CharIndex(' ', c.Zip, 0) = 0 THEN Left(c.Zip, 5) + '-' + Right(c.Zip, 4)
ELSE c.Zip
END As Zip
,ac1.descr As Terms
,ac2.descr As Status
FROM
ACTCustomer c (NOLOCK)
LEFT OUTER JOIN CustSales cs ON c.CustId = cs.CustId
LEFT OUTER JOIN ACTSalesperson s ON cs.SlsId = s.SalesId
INNER JOIN @SalespersonTable st ON s.Name = st.tmpSalesperson OR (s.Name IS NULL AND @pIncludeOpen = 'Y')
INNER JOIN ACTCode ac1 ON ac1.Code = c.Terms And ac1.FieldId = 'CustTerms'
INNER JOIN ACTCode ac2 ON ac2.Code = c.Status And ac2.FieldId = 'Status'
WHERE
c.LastInvcDate <= @pRunDate
And c.ClassId <> 'TR'
ORDER BY
SalespersonName, Name, CustId
Hi Everyone i wonder if there anyone know
what is "Render report with most recent data" and execution SnapShot and the different between them
and also it will be great of someone provide me with blog or a link that describe these 2 properties
Thanx
Maylo
Hi there,
Is there a way to programmatically save a RS results into Excel format using the render method ?
I had read about that capability but I can't seem to find any sample code on how to do it. Is this a parameter that you have to set in the render method ?
Any suggestion or tips are much appreciated !
Thanks !
I know that SSRS default rendering formats is HTML. is there anyway we can change this behaviour to render in XM format for specific reports.
View 5 Replies View Related
Hi all,
Currently, I am using the SSRS 2005 and try to toggle the report columns similar to Excel's column grouping function. Users can expand "+" / collapse "-" the columns in the render excel report. It works fine when I excute the tabular report in the web yet the toggle function is missing when I render the report to an Excel report. I am not sure the toggle function will only work for the row items or both as the excel report can keep the toggle function for the row items. Please help.
Hi
I really need your help. I’ve got a table with 4 columns – username (a string of text), dateTime (a date and time), duration (time in minutes), roomID (URL). I really need some help with writing up some code behind to check if a user has permission to continue. I’ve got the first bit, but I need help with collecting the data and testing it:
SqlConnection conn = new SqlConnection(Global.ConnectionString); SqlCommand cmd = new SqlCommand("select * from tblActiveSession where Username=@Username", conn);
SqlParameter paraUsername = cmd.Parameters.Add("@Username", SqlDbType.NVarChar); paraUsername.Value = this.txtUsername.Text;
try { conn.Open()
This is where I need the help. What I need is to test each row against the following:
If now() is within the allowed time frame – greater than dateTime, but less than dateTime + duration, then break the loop and redirect to roomID.
I really hope this makes sence, and I’m greatful for any help.
Many thanksRichard
Is there any better way to debug a query encased in IIF statements thanto find bugs at runtime? I have an especially ugly CommandText for oneof my datasets, and debugging it when there is an error is nearlyimpossible. I realize that it's much cleaner when you have straightSQL, but otherwise the tool doesn't seem to be very user-friendly.Thanks,Mike
View 1 Replies View RelatedI am converting a crystal report to ssrs 2005.
I would like to know what the best method of handling a rather large record selection task.
Here is the crystal version.
if {?WhseRegion} = 'Western' then {R_ShippingLog;1.InvUnitSite} in ['LA','AL','DA','DB','OA','PO','SE','TH','TN']
else if {?WhseRegion} = 'Eastern' then {R_ShippingLog;1.InvUnitSite} in ['AD','BE','CH','CI','EL','FL','IL','JL','KC','KS','MA','MI','MK','NE','NJ','NO','PA','SA','STL']
else {R_ShippingLog;1.InvUnitSite} in ['LA','AL','DA','DB','OA','PO','SE','TH','TN','AD','BE','CH','CI','EL','FL','IL','JL','KC','KS','MA','MI','MK','NE','NJ','NO','PA','SA','STL']
What I trying to figure out is how to incorporate the above in the dataset filter area on the datagrid.
any ideas?
I get the following error when generating a report. I use the "render" method in an asp.net page. I have also seen Timeout errors, which is the second error listed below.
Configuration
db-SQL Server 2000 on clustered windows 2003 server SP1, 5.5 GB RAM
SSRS 2005 and IIS 6.0 on 2nd windows 2003 server SP1, 3.75 GB RAM
generating SSRS Report using asp.net
Error is on large amounts of data, main source table has 11.2 Million records. The stored procedure returns
507,387 rows in approx. 25 minutes.
No problem with smaller amounts of data using the same source of 11.2 million records, but returning
much less.
Error 1: (from try/catch on render method)
System.Web.Services.Protocols.SoapException: An error has occurred during report processing. ---> An error has occurred during report processing. ---> An error has occurred during report processing. ---> The Group expression used in grouping €˜territory€™ references a data set field which contains an error: System.InvalidOperationException: Invalid attempt to MetaData when reader is closed. at System.Data.SqlClient.SqlDataReader.get_MetaData() at System.Data.SqlClient.SqlDataReader.GetValue(Int32 i) at Microsoft.ReportingServices.DataExtensions.DataReaderWrapper.GetValue(Int32 fieldIndex) at Microsoft.ReportingServices.DataExtensions.MappingDataReader.GetFieldValue(Int32 aliasIndex) at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) at rptsvc.ReportingService.Render(String Report, String Format, String HistoryID, String DeviceInfo, ParameterValue[] Parameters, DataSourceCredentials[] Credentials, String ShowHideToggle, String& Encoding, String& MimeType, ParameterValue[]& ParametersUsed, Warning[]& Warnings, String[]& StreamIds) in c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Filesswisherreports842e8e9d5ff5a831App_WebReferences.no0lpcgz.0.cs:line 1706 at ar_sum_aging.btnGenRpt_Click(Object sender, EventArgs e) in U:Visual Studio 2005ProjectsSwisherReportsar_sum_aging.aspx.vb:line 32
Error 2: (from ReportServer error log)
w3wp!processing!1!9/25/2006-18:32:53:: e ERROR: An exception has occurred in data source 'ar_sp'. Details: System.OutOfMemoryException: Exception of type 'System.OutOfMemoryException' was thrown.
at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RuntimeDataSetNode.GetNextDetailRow()
at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RuntimeReportDataSetNode.FirstPassGetNextDetailRow()
at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RuntimeDataSetNode.FirstPass()
at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RuntimeDataSetNode.FirstPassProcess(Boolean& closeConnWhenFinish)
at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RuntimeReportDataSetNode.Process()
at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RuntimeDataSetNode.ProcessConcurrent(Object threadSet)
w3wp!processing!1!9/25/2006-18:32:53:: i INFO: Merge abort handler called for ID=-1. Aborting data sources ...
w3wp!processing!1!9/25/2006-18:32:53:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing., ;
Info: Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing. ---> System.OutOfMemoryException: Exception of type 'System.OutOfMemoryException' was thrown.
at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RuntimeDataSetNode.GetNextDetailRow()
at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RuntimeReportDataSetNode.FirstPassGetNextDetailRow()
at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RuntimeDataSetNode.FirstPass()
at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RuntimeDataSetNode.FirstPassProcess(Boolean& closeConnWhenFinish)
at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RuntimeReportDataSetNode.Process()
at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RuntimeDataSetNode.ProcessConcurrent(Object threadSet)
--- End of inner exception stack trace ---
w3wp!processing!1!9/25/2006-18:32:53:: w WARN: Data source 'AR': Report processing has been aborted.
w3wp!processing!1!9/25/2006-18:32:53:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing., ;
Info: Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing. ---> System.OutOfMemoryException: Exception of type 'System.OutOfMemoryException' was thrown.
at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RuntimeDataSetNode.GetNextDetailRow()
at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RuntimeReportDataSetNode.FirstPassGetNextDetailRow()
at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RuntimeDataSetNode.FirstPass()
at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RuntimeDataSetNode.FirstPassProcess(Boolean& closeConnWhenFinish)
at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RuntimeReportDataSetNode.Process()
at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RuntimeDataSetNode.ProcessConcurrent(Object threadSet)
--- End of inner exception stack trace ---
w3wp!library!1!09/25/2006-18:32:58:: e ERROR: Found System.OutOfMemoryException exception: Microsoft.ReportingServices.Diagnostics.Utilities.RSException: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing. ---> System.OutOfMemoryException: Exception of type 'System.OutOfMemoryException' was thrown.
w3wp!library!1!09/25/2006-18:32:58:: e ERROR: Terminating worker process