Create A Table And Then Using It As OLE DB Destination Component
Apr 12, 2007
I want to do the following in a package:
Create a table at the beginning of a package (using a ExecuteSQLTask component) and then use the created table as a OLE DB destination component, later on the package.
Is this possible in SSIS?
The problem I run into is that I have to point the OLE DB destination component to a table and set up mappings, however as the table does not exist until the package is running, it does not seem to be possible.
I've looked at:
http://blogs.conchango.com/jamiethomson/archive/2006/11/19/SSIS_3A00_-Using-temporary-tables.aspx
Which is slightly similar to what I want, but the table I create would not be a temp tables, and I need to set up mappings and I don't see how this is possible.
Thanks
View 2 Replies
ADVERTISEMENT
Feb 17, 2007
HI,
I'm programmatically able to import data between tables when the Destination table already exists but when Detination table has to be created on the fly (Name will be provided), I'm not successful in doing so.
Basically the requirement is to dump the resultset from the source in to a temp table so that the temp (Destination) table matches the Source's Schema exactly.
Has anybody done that?
Any help in this regard is greatly appreciated.
Pavan
View 3 Replies
View Related
Aug 13, 2007
Hi all
I'm into a project which uses a lot of views for joining 2 or more tables. Using the MERGE component in SSIS will be a huge effort coz it only has 2 inputs and I gotta SORT the input too.
Isnt it possible to have a VIEW like component that joins more than 2 tables and DOESNT need sorting??
(I've thought about creating views in database engine but it breaks my data floe in SSIS and is'nt a practical solution)
View 4 Replies
View Related
May 18, 2008
SSIS Newbie Question:
I have a simple Control Flow setup that checks to see if a particular table exists. If the table does not exists, the table is created in an alternate path, if it does exist, the table is truncated before moving to a file import Data Flow that uses an OLE DB Destination to output the imported data.
My problem is, that I get OLE DB package errors if the table the OLE DB Destination Container references does not exist when I load the package.
How can I over come this issue? I need to be able to dynamically create the table in an earlier step, then use that table to import data into in a later step in the workflow.
Is there a switch I can use to turn off checking in the OLE DB Destination Container so that it will allow me to hook up the table creation step?
Seems like this would be a common task...
Steps:
1. Execute SQL Task to see if the required table exists
2. Use expresions to test a variable to check the results of step 1
3. If table exists, truncate the table and reload it from file in Data Flow using OLE DB Destination
4. If table does not exist, 1st create it, then follow the normal Data Flow
Can someone help me with this?
Signed: Clueless with a deadline approaching...
View 3 Replies
View Related
Feb 6, 2007
when loading the transformed data into OLE DB destination, there is no options to truncate destination table first. Have to insert a middle step to run script to truncate the destination table first.
I'm very confused. We even has the options of keeping or deleting the data in destination table in SQL2000 DTS package. Why we don't have this option in SQL2005??
View 6 Replies
View Related
Sep 24, 2007
I am creating and running a package programmatically. I have the source component set up fine, and the destination component seems good, but when the package is run, it gets the error message: "Excel destination failed validation and returned validation status "VS_NEEDSNEWMETADATA" ". This would lead me to believe that I need a ReinitializeMetaData() call, but I already have that (see below). How do I fix this? Thanks for your help.
' Create and configure an OLE DB destination.
Dim conDest As ConnectionManager = package.Connections.Add("Excel")
conDest.ConnectionString = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" & _
Dts.Variables("User::gsExcelFile").Value.ToString & ";Extended Properties=""Excel 8.0;HDR=YES"""
conDest.Name = "Excel File"
conDest.Description = "Excel File"
Dim destination As IDTSComponentMetaData90 = dataFlowTask.ComponentMetaDataCollection.New
destination.ComponentClassID = "DTSAdapter.ExcelDestination"
' Create the design-time instance of the destination.
Dim destDesignTime As CManagedComponentWrapper = destination.Instantiate
' The ProvideComponentProperties method creates a default input.
destDesignTime.ProvideComponentProperties()
destination.RuntimeConnectionCollection(0).ConnectionManagerID = conDest.ID
destination.RuntimeConnectionCollection(0).ConnectionManager = DtsConvert.ToConnectionManager90(conDest)
destDesignTime.SetComponentProperty("AccessMode", 0)
destDesignTime.SetComponentProperty("OpenRowset", Dts.Variables("User::gsSheetName").Value.ToString)
destDesignTime.AcquireConnections(Nothing)
destDesignTime.ReinitializeMetaData()
destDesignTime.ReleaseConnections()
' Create the path from source to destination.
Dim path As IDTSPath90 = dataFlowTask.PathCollection.New
path.AttachPathAndPropagateNotifications(source.OutputCollection(0), _
destination.InputCollection(0))
' Get the destination's default input and virtual input.
Dim input As IDTSInput90 = destination.InputCollection(0)
Dim vInput As IDTSVirtualInput90 = input.GetVirtualInput
' Iterate through the virtual input column collection.
For Each vColumn As IDTSVirtualInputColumn90 In vInput.VirtualInputColumnCollection
' Call the SetUsageType method of the destination
' to add each available virtual input column as an input column.
destDesignTime.SetUsageType(input.ID, vInput, vColumn.LineageID, DTSUsageType.UT_READONLY)
Next
View 8 Replies
View Related
Sep 21, 2007
Hello, I am trying to create a simple package programmatically. I am following the examples in the BOL, and from some advice here. I am getting stuck at creating an Excel Destination and setting its sheetname. Everything works fine, including setting the output Excel filename. I get a runtime exception when I try to set the sheetname via SetComponentProperty. Is there another way, or am I doing something wrong? Thanks for any info you may have.
' Create and configure an OLE DB destination.
Dim conDest As ConnectionManager = package.Connections.Add("Excel")
conDest.ConnectionString = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" & _
Dts.Variables("User::gsExcelFile").Value.ToString & ";Extended Properties=""Excel 8.0;HDR=YES"""
conDest.Name = "Excel File"
conDest.Description = "Excel File"
Dim destination As IDTSComponentMetaData90 = dataFlowTask.ComponentMetaDataCollection.New
destination.ComponentClassID = "DTSAdapter.ExcelDestination"
' Create the design-time instance of the destination.
Dim destDesignTime As CManagedComponentWrapper = destination.Instantiate
' The ProvideComponentProperties method creates a default input.
destDesignTime.ProvideComponentProperties()
destination.RuntimeConnectionCollection(0).ConnectionManager = DtsConvert.ToConnectionManager90(conDest)
destDesignTime.SetComponentProperty("AccessMode", 0)
'runtime Exception here
destDesignTime.SetComponentProperty("OpenRowSet", "functions")
View 3 Replies
View Related
Apr 24, 2008
I have an SSIS package that produces an Excel output file say File1
The Excel output file is created from a previous script task by copying a standard excel template to File1
after the copy, File1 has the disclaimer, legend etc... and a header row at row 10.
So data rows should only start at row 11.
I was googling and found that people who read Excel file using an Excel source component have been successful reading
from a range by the use of the OPENROWSET property. It is said to set this property to Sheet1$A5-B999
to start reading from row 5.
I tried to set the OPENROWSET property to be Sheet1$A11-B999 but am getting an error "Check that object exists"
(Sheet1 does exist) So I guess it is the range that has an improper syntax or something else is wrong.
Please advise. Thanks
View 1 Replies
View Related
Nov 8, 2006
I am writing a custom dataflow destination that writes data to a named pipe server running in an external process. At runtime, in PreExecute, I check to see if the pipe exists. If it does not exist I want to be able to fail the component and gracefully complete execution of my package.
Question is, how do I do this? If I make a call to ComponentMetaData.FireError() that will only create an OnError event and not actually stop the execution. So, how to I halt the execution of my component and return the error message?
Thanks,
~ Gary
View 2 Replies
View Related
Dec 10, 2007
Is there a default destination component used when a new data flow is created? The reason I ask is simply curiosity. I have an xml file with 2 pieces of data: item A and item B. A should simply get copied out of the file. B should undergo a quick transform. I set up an XML source such that two columns are mapped correctly to the XML source data of A and B. I set up my data transform task as well. So, if I leave those two components on the .dtsx page with no other components, then will there be a default data flow destination already created? ...OR, do you always have to have a destination component?
Thanks for the input. I am just curious.
View 4 Replies
View Related
Nov 17, 2006
Here is the situation. I have created a package that takes 50 columns from a comma delimited flat file. I then validate and clean the data. Next I add two columns that were not in the original source file. These two columns need to be in the 5th and 9th column position when the file is then re-written to a text file. How do i get those two columns to write out in the desired order? Any ideas?
K. Lyles
View 1 Replies
View Related
Feb 24, 2006
Hi there,
I am writing a Custom Destination component with a custom UI. The UI contains a combo box which contains the connection names of type €œFLATFILE€?. I also have provided a button which would create a new connection of type €œFLATFILE€? by making a call to CreateConnection method of IDtsConnectionService.
The combo box gets properly updated showing the connections of type €œFLATFILE€? but on clicking on the new Connection button the application hangs up.
Am I missing something or is there some other way to do it?
The function are the events handlers which are called by the UI.
void form_GetConnections(object sender, AvailableColumnsArgs args)
{
Debug.Assert(this.ServiceProvider != null, "Service Provider not valid.");
this.ClearErrors();
try
{
IDtsConnectionService connectionService = (IDtsConnectionService)this.ServiceProvider.GetService(typeof(IDtsConnectionService));
if (connectionService != null)
{
ArrayList temp_Connections =
connectionService.GetConnectionsOfType("FLATFILE");
args.AvailableColumns = new AvailableColumnElement[temp_Connections.Count];
for (int i = 0; i < temp_Connections.Count; i++)
{
ConnectionManager runtimeConnection = (ConnectionManager)temp_Connections;
args.AvailableColumns.AvailableColumn = new DataFlowElement(runtimeConnection.Name, runtimeConnection);
}
}
}
catch (Exception ex)
{
this.ReportErrors(ex);
}
}
void form_GetNewConnection(object sender, AvailableColumnsArgs args)
{
Debug.Assert(this.ServiceProvider != null, "Service Provider not valid.");
this.ClearErrors();
try
{
IDtsConnectionService connectionService = (IDtsConnectionService)this.ServiceProvider.GetService(typeof(IDtsConnectionService));
if (connectionService != null)
{
connectionService.CreateConnection("FLATFILE");
ArrayList temp_Connections =
connectionService.GetConnectionsOfType("FLATFILE");
args.AvailableColumns = new AvailableColumnElement[temp_Connections.Count];
for (int i = 0; i < temp_Connections.Count; i++)
{
ConnectionManager runtimeConnection = (ConnectionManager)temp_Connections;
args.AvailableColumns.AvailableColumn = new DataFlowElement(runtimeConnection.Name, runtimeConnection);
}
}
}
catch (Exception ex)
{
this.ReportErrors(ex);
}
}
Has anyone else run into this?
I am running
SQL 2005 9.0.1399 and VS 2005 8.0.50727.42 (RTM.50727.4200) on Windows Server 2003 Enterprise Edition SP1.
Any suggestions would be welcome.
The code sample is an extension to the RemoveDuplicates sample (Dec 2005) which comes along with the SQL Server.
TIA,
Robinson
View 5 Replies
View Related
Feb 12, 2008
Hi,
All the examples I've seen for creating custom data destinations (scripts or components) show that in the ProcessInput method you need to iterate through each record and execute a commit for each row. Here's a sample from http://forums.microsoft.com/msdn/showpost.aspx?siteid=1&postid=70469
Public Overrides Sub MyAddressInput_ProcessInputRow(ByVal Row As MyAddressInputBuffer)
With sqlCmd
.Parameters("@addressid").Value = Row.AddressID
.Parameters("@city").Value = Row.City
.ExecuteNonQuery()
End With
End Sub
This works for me but is extremely slow when processing lots of rows. Has anyone come across a better/faster example for committing rows to a database when creating a custom data destination component? I was thinking about using the ADO.NET batch update. Any thoughts on this or other approaches?
Thanks,
Mike Fulkerson
View 3 Replies
View Related
Mar 17, 2006
I wrote a custom destination component. Everything works fine, except there is a logging message that is displayed that I cannot get rid of or correct. Here is the end of the output of a package containing my component:
Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x0 at Data Flow Task, MyDestination: Inserted 40315 rows into C: empfile.txt
Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "MyDestination" (9)" wrote 0 rows.
SSIS package "Package.dtsx" finished: Success.
I inserted a custom information message that contains the correct number of rows written by the component. I would like to either get rid of the last message "... wrote 0 rows", or figure out what to set to put the correct number of rows into that message.
This message seems to happen in the Cleanup phase. It appears whether I override the Cleanup method of the Pipeline component and do nothing, or not. Any ideas?
public override void Cleanup()
{
ComponentMetaData.FireInformation(0, ComponentMetaData.Name,
"Inserted " + m_rowCount.ToString() + " rows into " + m_fileName,
"", 0, ref m_cancel);
base.Cleanup(); // or not
}
View 6 Replies
View Related
Jul 11, 2006
After much work and thanks to all of you who helped on this here is a code sample that can be adapted. From the dataflow task add an OLEDB source component, a row count component and finally a Script Destination Component.
On the Script Destination Component rename the Input node of the imports and outputs tree view to "ParsedInput"
The readonly User: variables that start with gs can be read in the PreExecute method
The readwrite User: variable giSuccessCount can only be used in the post execute task because it is populated by the Row Count Component which is the previous object in the Dataflow
The xml code is adapted from an idea in Donald Farmers book
enjoy
Dave
Now if someone can make a Script Source Component that can read a file with a header , data body and trailer that would b egreat!
' Microsoft SQL Server Integration Services user script component
' This is your new script component in Microsoft Visual Basic .NET
' ScriptMain is the entrypoint class for script components
Imports System
Imports System.Data
Imports System.Math
Imports System.IO
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
Imports System.Xml
Public Class ScriptMain
Inherits UserComponent
Dim sw As StreamWriter
'In addition to using the Imports System.Xml statement a reference must be added to the
'System.Xml assembly (Select Project-Add Reference from IDE)
Dim xWriter As XmlTextWriter
Dim OutputFileType As String '.csv or .xml
Public Overrides Sub PreExecute()
'Read Only variables
Dim gsPickUp As String = Me.Variables.gsPickUp 'D:ftprootOutAvid'
Dim gsPickUpFilename As String = Me.Variables.gsPickUpFilename '1_AVID_'
Dim gsPickUpFileExtn As String = Me.Variables.gsPickUpFileExtn '.csv'
Dim gsMemoText As String = Me.Variables.gsMemoText 'Memo Text : credit adjustment'
Dim gsStatementText As String = Me.Variables.gsStatementText 'Statment Text : credit adjustment'
Dim gsRunMode As String = Me.Variables.gsRunMode 'UPDATE'
Dim fileName As String = gsPickUp & "" & gsPickUpFilename
fileName = fileName & (Format(Now(), "yyMMdd").ToString)
'MsgBox(fileName)
OutputFileType = gsPickUpFileExtn
If OutputFileType = ".csv" Then
fileName = fileName & gsPickUpFileExtn
sw = New StreamWriter(fileName) 'connection to dest file
'Header records
sw.Write(gsRunMode)
sw.Write(Environment.NewLine) ' end of line
sw.Write(gsMemoText)
sw.Write(Environment.NewLine)
sw.Write(gsStatementText)
sw.Write(Environment.NewLine)
sw.Write(Environment.NewLine) 'Spacer
End If
If OutputFileType = ".xml" Then
fileName = fileName & gsPickUpFileExtn
'xWriter = New XmlTextWriter(Me.Connections.XMLConnection.ConnectionString, Nothing)
'xWriter.WriteStartDocument()
'xWriter.WriteComment("Customer file parsed using script")
'xWriter.WriteStartElement("x", "customer", "http://some.org/name")
'xWriter.WriteAttributeString("FileName", Me.Connections.XMLConnection.ConnectionString)
xWriter = New XmlTextWriter(fileName, Nothing)
xWriter.WriteStartDocument()
xWriter.WriteComment("Customer file parsed using script")
xWriter.WriteStartElement("x", "customer", "http://some.org/name")
xWriter.WriteAttributeString("FileName", fileName)
End If
End Sub
Public Overrides Sub ParsedInput_ProcessInputRow(ByVal Row As ParsedInputBuffer)
If OutputFileType = ".csv" Then
Dim delim As String = ","
sw.Write(Row.ProjectID.ToString + delim)
sw.Write(Row.TransactionRefNum.ToString + delim)
sw.Write(Row.CustomerNum.ToString + delim)
sw.Write(Row.AccountNum.ToString + delim)
sw.Write(Environment.NewLine) ' end of line
sw.Flush() 'send the stream to file
End If
If OutputFileType = ".xml" Then
xWriter.WriteStartElement("CUSTOMER")
xWriter.WriteStartElement("ProjectID")
xWriter.WriteString(Row.ProjectID.ToString)
xWriter.WriteEndElement()
xWriter.WriteStartElement("TransactionRefNum")
xWriter.WriteString(Row.TransactionRefNum.ToString)
xWriter.WriteEndElement()
xWriter.WriteStartElement("CustomerNum")
xWriter.WriteString(Row.CustomerNum.ToString)
xWriter.WriteEndElement()
xWriter.WriteStartElement("AccountNum")
xWriter.WriteString(Row.AccountNum.ToString)
xWriter.WriteEndElement()
End If
End Sub
Public Overrides Sub PostExecute()
If OutputFileType = ".csv" Then
'Create the trailer
sw.Write(Environment.NewLine) ' blank line
sw.Write("RECORD_COUNT: " & Me.Variables.giSuccessCount.ToString) 'ReadWrite Varible
sw.Write(Environment.NewLine)
sw.Flush() 'send the stream to file
'Close file
sw.Close()
End If
If OutputFileType = ".xml" Then
xWriter.WriteStartElement("RecordCount")
xWriter.WriteString(Me.Variables.giSuccessCount.ToString)
xWriter.WriteEndElement()
xWriter.WriteEndElement()
xWriter.WriteEndDocument()
xWriter.Close()
End If
End Sub
End Class
View 6 Replies
View Related
Mar 8, 2008
I have a data flow that consists of
OLE DB source which calls a stored proc that returns a result set
data conversion
Excel destination
I am in design mode in Business Intelligence studio. My excel destination (with an Excel Connection) shows no sheet name though I have an execute SQL task before the data flow to create the excel table called SHEET1. Needless to say, there are no output columns visible to do any mappings. I did go to the ExcelConnection to set the OpenRowset Property to SHEET1 but it seems to have no effect.
I can do the export in SQL Server Management studio and that works fine, but it is basic and does not meet my requirements. I have to customize the package to allow dynamic Excel filenames based on account names and have to split my result set into multiple excel sheets because excel 2003 has a max of 65536 rows per sheet. Also when I use the export wizard, I have the source as a table and eventually the source has to be a stored proc with input parms.
What am I missing or doing wrong? Thanks in advance
View 6 Replies
View Related
Mar 22, 2007
I'm trying to create a simple Data transfermation. I have a flat file that came of a unix server.. it's 177 bytes wide.. thought it was 175, but when I created the flat file connector, I could see some extra characters on the end.
My output is going to be an excel spreadsheet, I only want two columns from the input. I created an oledb jet 4.0 connection. and followed instructions from here :
http://aspalliance.com/889_Extracting_Data_from_a_Flat_File_with_SQL_Server_2005_Integration_Services
to create my datafow.
On my first attempt to dataflow, I ran into unicode errors and had to do this:
ran into a problem with unicode errors. went to the source for the flat file. for the output column in question changed to Unicode string [DT_WSTR].
When I run , here are the errors I get:
[OLE DB Destination [513]] Error: An OLE DB error has occurred. Error code: 0x80040E09. [DTS.Pipeline]
Error: The ProcessInput method on component "OLE DB Destination" (513) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0202009.
[GanchoFileSource [1]] Information: The total number of data rows processed for file "\ammia01dev04D$JCPcpmgancho_venta_20070321.sal" is 19036.
[GanchoFileSource [1]] Error: Setting the end of rowset for the buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: The PrimeOutput method on component "GanchoFileSource" (1) returned error code 0xC0209017. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
View 4 Replies
View Related
Oct 26, 2007
Hello,
I have a package that has a data lfow task. this task imports data from a db2 database (using the IBM Ole DB provider fro db2) and adds it to sql server database table. This package was created on the server. then though version control (using TFS source control) I check out the package on my local machine. and when I open the package I get the foll 3 errors.
Error 1 Validation error. Import Account Num from BMGP_BDR: DTS.Pipeline: The component metadata for "component "DataReader Source" (1113)" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
Error 2 Error loading BMAG Download Xref Tables - bmag.dtsx: Microsoft.SqlServer.Dts.Pipeline.ComponentVersionMismatchException: The version of component "DataReader Source" (1113) is not compatible with this version of the DataFlow. [[The version or pipeline version or both for the specified component is higher than the current version. This package was probably created on a new version of DTS or the component than is installed on the current PC.]] at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostCheckAndPerformUpgrade(IDTSManagedComponentWrapper90 wrapper, Int32 lPipelineVersion)
Error 3 Error loading BMAG Download Xref Tables - bmag.dtsx: The component metadata for "component "DataReader Source" (1113)" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
Please advice.
Thank you.
View 7 Replies
View Related
Jan 23, 2007
Hi,
I have a package which reads an Access file from a folder. My connection manager to this file is .NET providers for OledbMicrosoft Jet 4.0 OLE DB Provider.
Package works from my computer. But when I execute it on the server as a SQL Agent job, I get
The component metadata for "component "DataReader Source" (1) could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
I copied the mdb file to a folder on the server which my packages have no problem reading data from.
My packages run under the same domain account as defined in proxies.
Appreciate a help.
Gulden
View 4 Replies
View Related
Sep 11, 2007
Hi all:
I've have a data flow task where I'm importing data into a SQL Server table. All of the fields are mapped, and the source table does not have the uniqueidentifier column (and the destination table will have a uniqueidentifier column). How do I generate a uniqueidentifier for that column without specifiing a default value in the database design? Or is that the only way to do this?
Thanks...
View 5 Replies
View Related
Oct 8, 2007
Hi,
I need to dynamically create a script component (by code).
Is it possible?
Thanks ahead,
Eran
View 6 Replies
View Related
Nov 8, 2006
Hi,
I am trying to programmatically in C# create FlatFileSource and OleDB Destination?
I would like your help.... How about column mapping.
I would appreciate your reply.....
View 1 Replies
View Related
Feb 16, 2007
I am trying to create a text file from an SQL query on a SQL table. I would like the SSIS package to prompt for the file name and path. The text file is tab delimited and the text qualifier is a double quote.
Thanks,
Fred
View 9 Replies
View Related
Oct 14, 1999
HI
If I create an Active Script like this :
function Main()
Dim fso
Dim a
Set fso = CreateObject("Scripting.FileSystemObject")
Set a = fso.CreateTextFile("c:est.txt")
a.WriteLine("This is a test")
a.Close
end Function
I got an error
ErrorCOde: 0
ErrorSource : VBScriptENgineError
Error Description : ActiveX Component can't create object : CreateObject
The error is at line Set fso=CreateObject....
Any idea ?
THanks
View 1 Replies
View Related
Jun 5, 2007
hi all,
i am working on a small "Biztalk" engine, by creating dynamic ssis packages that change according to the client source file definition.
in order to create a row-number to each row in my input file, i am tryng to add the Konesans's Row Number component to the dynamic package by using SSIS API, but i get a lot of errors. the component is not created as a"rowNumber" component, but as a General Managed Component, though i use the ComponentClassID as the classID in the RowNumber component.
has anybody try to do this ?
is there any way to get the row number other then this way?
any ideas?
thank you!!! for all your help until now!!
View 1 Replies
View Related
Jun 6, 2007
Hello. I am attempting to add a distribution database to an instance of SQL Server on my local PC. I am using SQL 2005 Developer Edition. I am able to set the instance up as a distributor using the following command:
exec sp_adddistributor @distributor = N'computernameinstancename'
I use the following command to create the distribution database:
exec sp_adddistributiondb @database = N'distribution', @data_folder = N'C:Program FilesMicrosoft SQL ServerMSSQL.2MSSQLData',
@data_file_size = 4, @log_folder = N'C:Program FilesMicrosoft SQL ServerMSSQL.2MSSQLData',
I get the following error when executing that command:
Msg 14430, Level 16, State 1, Procedure sp_adddistributiondb, Line 214
Invalid destination path C:Program FilesMicrosoft SQL ServerMSSQL.2MSSQLData.
It's not due to permissions on that particular folder. I have tried using other folders, all with the same results. Also, I am an Administrator on the PC, so I have full permissions. I have tried running the SQL Server services as myself and Local System. Same results both times. Co-workers with apparently the same setup are able to create the distribution database without a problem.
Has anybody had this type of problem?
Thanks,
Evan
View 5 Replies
View Related
Feb 13, 2007
I have to generate flat files from SQL Server tables. Its a backup package for few tables which will be run daily. I want the names of the destination flat files to be automatically generated at run time.
I created an expression for the Flat file destination connection and appended the date and the time to the flat file name. For today my file name is 'table02-12-2007.txt'. for tomorrow it should be 'table02-13-2007'. When I evaluate the expression it shows the correct value.
But when i run the package, I receive an error indicating - Destination file is not found. Error is because the destination file is not present at runtime and I was hoping that the package will be create the file on the fly.
Is there any way to create the destination file at runtime? Or Am I missing a step?
Any help will be greatly appreciated.
Thanks
View 3 Replies
View Related
Jan 14, 2008
Wondering how this is handled by Multicast component. If multiple copies are created in the memory and the size of the dataset is large, this could cause some performance problems. Any thoughts? TIA
View 8 Replies
View Related
Mar 27, 2007
I have a select Script as follows:
SELECT c.ABC AS 'ABC'
, a.Qty AS 'Quantity_Recived'
, b.PC AS 'PC'
, b.PC AS 'PC'
, 'I' AS 'Flag'
FROM TNRInventory.dbo.tInventoryAlloc AS a
LEFT OUTER JOIN vwInventoryAllocMapping AS vwMap ON a.TNRAllocTypeID = vwMap.TNRInventoryAllocID
LEFT OUTER JOIN ABC.dbo.ZREFRESHTAB AS b ON a.DispenserID = b.Asset
LEFT OUTER JOIN ABC.dbo.TableJoinKey AS c ON a.TitleID = c.TITLE_ID
WHERE (vwMap.DataSourceID = 3) and vwMap.[DataSourceAllocName] = 'I'
group by c.SKU_NO , vwMap.[DataSourceAllocName],a.Qty , b.Profit_Center
order by c.SKU_NO,vwMap.[DataSourceAllocName]
GO
i have to send the result of aforesaid script in batch of 300 records per file (tab delimited text file)
now the file name must be dynamically created as each file will contain 300 records.
I have found some document related to same issue on this url
http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=1238184&SiteID=17
but still there is a catch.
Can any one guide/suggest me better way to do the aforesaid.
Thanks
View 8 Replies
View Related
Oct 25, 2007
Hi,
I have a data task with the following requirements:
1) Run query against database to retrieve rows
2) Add header and footer row to the result set. The footer row must contain a count of the records.
3) Write the rows to a fixed width file if there were any data rows
I have got to the point that I can create the file (using a set of tasks that includes derived columns, sorts, aggregation and merges). However the file is created regardless of whether there were data rows returned.
I can't check the row count before proceeding as this isn't set until the data task ends. And if I try to split them into separate data tasks (so that I can access this variable and perform conditional execution) it becomes harder to access the original rows.
Do you have any recommendations on the best way to achieve this?
It all seems to be very complex and I'm starting to feel that it would be easier to do this outside of SSIS...
Please help me to keep the faith!
For those interested this is a slightly simplified version of what I have so far (all within a single data task):
1.Run dummy sql to create header row 2.Run main SQL to retrieve rows
| |
| 3.Multicast
| | |
| | 4.Create footer row by doing sum() in aggregate task
| | |
| 5.Merge body and footer
| |
6. Merge header with body and footer
|
7. Create fixed width file
View 5 Replies
View Related
Aug 4, 2006
Hi all,
I am redirecting the critical lookup errors to the flat files. These flat files got created regardless if there are lookup errors or not.
Is there a better way to conditionally create them only when there are lookup errors?
Thanks.
View 1 Replies
View Related
Jul 31, 2007
Is there a better way to do this?
We've all seen this, where it uses an individual .write statement for each column.
Code Snippet
Public Overrides Sub AWCCogent_ProcessInputRow(ByVal Row As AWCCogentBuffer)
With textWriter
Dim item As Object
If Not Row.AddressID_IsNull Then
.Write(Row.AddressID)
End If
.Write(columnDelimiter)
If Not Row.City_IsNull Then
.Write(Row.City)
End If
.WriteLine()
End With
End Sub
But hard coding this seems not the smartest way. Especially since in my text file, there needs to be close to 100 columns. This could be a nightmare to update down the road. But I can't seem to find the object collection to loop through, like row.items which would seem to be logical.
There's gotta be a better way, right Microsoft?
View 4 Replies
View Related
Apr 17, 2006
I'm having a tad bit of trouble getting output from an asynchronous component that I've written and am looking for some insight.
This component takes in a name string passed from upstream and parses the name components into standardized output fields. I'm using an asynchronous component because if the name string contains two names ("Fred & Wilma Flintstone") I'm outputting one row for Fred and one for Wilma. I've gotten it to run and with debugging have observed what appeared to me to be proper execution, but zero rows are flowing out of it.
In my ProvideComponentProperties method, I add the three fields and there associated metadata to the OutputColumnCollection. Is this method where this should occur? It's before the PrimeOutput method, so I didn't know if I should be creating the output columns in ProcessInput (i.e., after the output buffer is provided by PrimeOutput.)
In ProcessInput, I'm using AddRow for each input row and another if it contains a second name, setting the value for each index using the buffer's SetString method, to no avail. I can observe it to this point, but then don't know what's in that output buffer (if I'm using the wrong buffer index value, etc)
Thanks.
View 3 Replies
View Related
