I installed SQLServer 2005 Standard Edition and tried to created a
stored procedure in VB. From START/PROGRAMS/MICROSOFT VISUAL STUDIO
2005, I created a blank solution. What type of project shall I create
for creating a stored procedure in VB ?
I tried to install SQL Server again in case I left back some parts, but
I got a message that all parts were installed.
Hi,I created a VB SQL CRL Stored procedure for calculating a value. Valueis returned as belowUsing sConn4 As New SqlConnection("context connection=true")sConn4.Open()scmd = New SqlCommand("SELECT " & var_max, sConn4)sdrd = scmd.ExecuteReader()SqlContext.Pipe.Send(sdrd)End UsingWhen calling this stored procedure from a TSQL stored procedure forusing the value for further processing the value returned to myvariable is 0. The correct value should be 56. In results tab I get thecorrect result, but how can I assign it to my variable @max ?DECLARE @max1 intDECLARE @max intEXEC @max1 = [dbo].[VBSTP_calculate_MAX_no]@vsp_table_name = N'[dbo].[Message]',@vsp_table_key = N'message_no',@vsp_WHERE = N''print @max1 -- value here is 0SET @max = (SELECT @max1)Thanks a lot.
View 1 Replies View RelatedI was hoping to instantiate a channelfactory from a clr stored proc in order to send messages to a wcf endpoint but VS 2005 wont allow refs to anything other than what it calls "SQL Server" targets. Is calling a wcf endpoint from clr sp's possible? I've alreay read the article on serialization under ss2005 but dont believe it has the answer to this particular piece of the puzzle.
View 4 Replies View RelatedI have a very small project written in VB.Net 2005 using the SQL Server 2005 SSiS DTSx package.
I took a SQL Server 2000 dts package and using the SQL Server 3005 legacy tools migrated it so I could still use the package withing SQL 2005 until I can build one using BI/SSIS.
Anyway,I added the reference Microsoft.SqlServer.ManagedDTS so I could then use the Microsoft.SqlServer.Dts.Runtime so I can execute the commands:
Dim oApp As New Application
Dim oPkg As New Package
oPkg = oApp.LoadPackage(g_DTSx_Directory & "AOC copy Generic1 CSV to AOC_verify_file_1.dtsx", Nothing)
Dim oResults As DTSExecResult
oResults = oPkg.Execute
Ok. That works fine. Executes without a hitch. So now I try and create a setup project for this and I use the setup wizard.
During the creation of the setup project I get a message that states:
The following files may have dependencies that cannot be determined automatically. Please confirm that all dependencies have been added to the project.
C:windowssystem32msxml6.dll
OK. The dll is part of the reference I mentioned above and I have no idea what other dependencies it may have.
How do I find this out?
Has anyone else created a project like this and experenced the same?
I am on a clean build running WinXP Pro with SP2 - VS2005 with SP1 and the SQL Server 2005 tools.
I'm trying to create a CLR stored procedure and went ahead and created a Database Project. But when I click on New Item... it doesn't contain "Stored Procedure" as an item, just script items. How do I add this template? At first I was thinking well maybe it knows my SQL Server doesn't have CLR turned on, so I went ahead and turned that on but still doesn't show up. Any ideas?
Thanks,
Craig
Hi all How can create trigger in sql server project in VB.NET 2.0 ?thanks in advance
View 1 Replies View RelatedIs it possible to force a build to fail when a stored procedure in a project calls another stored procedure with one or more required parameters missing. E.g.:
Â
CREATE PROCEDURE [App].[ServiceUser_Save]
@userID int-- Param #0
,@serviceuserID int-- Param #1
,@version int-- Param #2 etc...
And then in a separate stored procedure we have the following
CREATE PROCEDURE [Admin].[CreateMiscellaneousData]
@customerIDint,
@serviceIDint,
@fullURL nvarchar(255),
@apiUserPwd nvarchar(255)
AS
BEGIN
...
EXEC@return_value = [App].[ServiceUser_Save]
@userID = 1,
@serviceuserID = 0, etc...
Note there is no value passed for the @Version parameter.
What I want is the build to fail because of the missing parameter on the call to ServiceUser_Save in the Create_MiscellaneousData stored procedure.
How can I achieve this?
forumid questid answerid answer replyby replyon 1 1 1 xxxx aaa 01/01/08(mm/dd/yy) 1 1 2 yyyy bbb 01/02/08 2 1 1 zzzz ccc 01/02/08 1 1 3 hhhh bbb 01/04/08 2 1 2 uuuu vvv 01/04/08 1 2 1 tttt ooo 01/05/08suppose i give forumid value=1 i want following answer recent reply and no.of replies forumid questid answerid no.of.reply answer replyby replyon 1 1 3 3 hhhh bbb 01/04/08 1 2 1 1 ttt ooo 01/05/08
View 14 Replies View RelatedHi!
I have a problem. I would like to create a stored procedure from a script file. I must use inparameters as well. I'm using ms Access 2000.
Please help me!
Mike.
Hi
I am sql server 2005.
how to create rdl using stored procedure which uses parameter
Thank you.
Is there a way to create a stored procedure that accepts a column name and returns the name of the tables that have that column name?
View 2 Replies View RelatedI have to create a stored procedure that accepts a column name and returns the name of the tables that have that column name. I'm not sure how to get it to accept the column name. Here's what I have so far:
create proc spTheNameOfTheProcedure
as
select table_name from information_schema.columns
where column_name = XXXXXX
no sure what to put where I have XXXXX
Say i had a system table in that table i had dbo.user then format (dd,mm,yyyy) after that i had dbo.user_backup_ 10_12_2007,dbo.user_backup_ 10_13_2007,dbo.user_backup_ 10_14_2007,dbo.user_backup_ 10_15_2007,dbo.user_backup_ 10_16_2007
If i use the SQL command
SELECT * FROM paychexdb.dbo.sysobjects
WHERE name like 'users_backup_%' AND xtype = 'U'
AND name not in( SELECT Top 3 name FROM paychexdb.dbo.sysobjects
WHERE name like 'users_backup_%' AND xtype = 'U'
ORDER BY Name DESC)
results would be 10_12_2007,10_13_2007.
So i want to put those results in a backup file and keep top 3 which is 10_14,10_15,10_16. I want to create a store procedure that i can execute and do that for all my tables. this stored proc (sp) should first backup the table if it doesn't exist and then delete all but the most recent 3
I am trying to write a stored procedure that generates a PDF file for example my PDF file will look something like this (there should be spaces between the columns):
First Name Last Name Address
Mike Mik Jr 141552 South
Charlie D 1422141
Lets say my table name whichthat has all these data is called dbo.TestTable
I spent so much time in google and I have not found one simple good example. Can you help me please
Thanks in advance for your help
Is it possible to drop and then create a view from a stored procedure? Like the way you can drop and create a temp table.
I want to create a view of the fields in a table something like: But I cannot include the field names, they may be changed by an admin user.
If exists view 'custom_fields"
drop view 'custom_fields'
Create view custom_fields
Select * From tblCustomFields
And make this a view in the db named custom_fields.
And I want to call it from a button click in my UI.
I need to use a stored procedure that will create a table. The table name must be passed to the stored procedure.
This is what I have so far, but it does not allow me to run it.
alter procedure dbo.createNewBUtable
(
@BU as varchar(50)
)
as
set nocount on;
create table @BU
(
BUid varchar(50) primary key,
BUinfo varchar(50)
)
Hi
Let me start by saying that SQL is
not my strong suit so please bear with me.
Here's my situation
I'm building a property portfolio system with db structure as follows
tblProperty (The master table - linked 1 to many via propertyID)
tblValuations (columns valuationID, propertyID, currentValue, valuationDate)
For each property in tblProperty the valuations table can hold multiple valuation entries.
I need to have a summary that shows the number of properties a user has
listed and crucially I need to be able to find the latest
valuation for each property & add them together to retrieve the
total value of a users portfolio
I'm totally stumped with this so any help/advice would be gratefully received
Lee
I just want to Know how to create an Array in a stored procedure. Please can you give the syntax and any Example.
View 1 Replies View RelatedHi!
How do I grant rights to an user for creating stored procedures (using T-SQL)?
Thanks,
Fabio
When I use comands insert and update with VB5 and ODBC, one temporary stored procedure is created in database tempdb to each command executed.
These stored procedures are deleted only when the connection is closed.
My program use comands insert and update inside a loop, and a lot of temporary stored procedure are generated and full the database tempdb. When it occur, others systems are afecteds.
My questions:
Why it occur ?
Wich have created this stored procedure ?
How to avoid it occur ?
The versions are:
SQL Server 6.5
Visual Basic 5.0
SQL Server ODBC Driver 2.65.0240
I have no right to connect to my hosting company using MS SQL2000 client.
And I have to use stored procedure, can any body tell me is it possible to
create stored procedure ( I need is complex one with loops of if loops).
If possible please list the syntax.
I tried to create a stored procedure but instead of opening up to a new stored procedure it displays an exist stored procedure. I erased the code and typed in my code now i received this error message.
MS SQL-DMO (ODBC SQLState:42000)
Error 2729: Procedure ‘spUpdate_date_time’ group number 1 already exists
in the database. Choose another procedure name
Does anyone know how I can fix this?
Your help is appreciated
I am trying to create a database within a stored procedure, so that the database name is generated each time. Please review the attached code, as sql seems to error out on '@dname'
select @iStatus = 0
select @dbname = 'offline' + '_' + convert(char(6),getdate(),112)
create database @dbname
on
( name = @dbname + 'data',
filename = 'F:MSSQLData' + @dbname + 'data.mdf',
size = 10mb,
filegrowth = 10% )
log on
( name = @dbname + 'log',
filename = 'F:MSSQLData' + @dbname + 'log.ldf',
size = 5mb,
filegrowth = 10% )
select @iStatus = @@error
if @iStatus = 0
print 'Part 1: Database offline_' + @dbname + 'has been created successfully'
else
print 'Part 1: Database Offline_' + @dbname + 'failed to create, status ' + convert(varchar(10), @iStatus)
end
yesterday i was trying to create Stored procedure but it fails i don't know why
CREATE proc GetBooksbyBorrowerID @Borrower_id INT
AS
BEGIN
SELECT A.BORROWER_ID ,a.ISBN, b.book_Title,b.LANGUAGE, CONVERT(VARCHAR,a.borrowed_from_date,103)"Borrowed On(dd/mm/yyyy)" FROM borrower_details a, book_mst b
WHERE a.borrower_id=@Borrower_id
AND a.ISBN = b.ISBN
END
GO
EXEC SP_Task1 10001
A simple one (not for me)
MS SQL Server 2005
Which permissions do I need to have (as a User) to create a Stored Procedure
Which other entity's properties do I need to change in order to create a Stored Procedure
Thanks
Experts
I am trying to create a view or Stored Procedure between different table
Table1 consist of the follwing Fields:
Ref_No: String hold the reference number, Unique
Details: String
Table2:
MasterRefNum : String, not Unique
SubscriberRefNum : String, not Unique
What I am trying to do is that when the user enter a refernece number the system should return back
1- the details where Ref_No = the required refernece number
2- get all the SubscriberRefNum from Table2 where MasterRefNum = the required refernece number and from the Table1 get the details for those SubscriberRefNum numbers
Any advice?
hi,
Im am wandering if it is possible to create two views in two different tables from within the same stored proc:ex
create proc myProc
as
use [myDb1]
go
create view myV1
as
select * from mytable
go
use [myDb2]
go
create view myV2
as
select * from mytable
go
go
---
of course the go's are not allowed in a sproc, the create statement must be the first of a query batch and a vew can not have the databaase name preapended like when creating a table plus one can not use the "use" word in a proc, I tried using exec to bypass the "first statement in a batch" and go restrictions but have not been able to overcome the "use [myDb]" restriction, is there a way to solve this problem?
thank you
Hi there,
Does anyone know any possible way of creating a dbf file from within a stored procedure?
Any guidence, articles, examples, topics to revice would be a great help.
Thanks guys
Butterfly82
Yes it looks like a stupid question
but when i right click stored procedures
and click new stored procedure, it gives me a
QRY analyzer style window and all i can do is save
the qry as a regular .qry file ?
Is there a stored procedure installed by sql server 2000 that I cancall and just pass in the name of a new database and have it createthe database for me? If not, how do I do it in sql? Thanks.
View 3 Replies View RelatedHi
I am sql server 2005.
how to create rdl using stored procedure which uses parameter
Thank you.
Hi All
I have a SP that i create tables and other objects on another database.
Creating table work well.
declare @s nvarchar(2000)
set @s = 'use db01'
set @s = @s + 'CREATE TABLE ABC (recid int)
exec (@s)
------------------------------------------------------------------------
But if i try to create a schema it gives error :
'CREATE SCHEMA' must be the first statement in a query batch.
declare @s nvarchar(2000)
set @s = 'use db01'
set @s = @s + 'CREATE SCHEMA AAA
exec (@s)
How can i solve it?
Thanks.
Using sql server reporting services, I want to create a report against a stored proc which has input parameters to the stored proc. Thanks!
View 5 Replies View Related