i am trying to create a pull subscription to my publication using T-SQL. The pull subcription is created successfully but the problem is that data is not merged correctly. I mean when i run the agent ( despite of having data in subscription / publication ) the data is not merged and i get "No Data Needed To Be Merged" message.
I want to use window script program to execute a pull subscription installed on SQL 2005 express edition. Because it free for downloand. is there a script that can call an existing pull subscription execution.
i have one publisher with one pull subscription. when i make any change in publisher, that change is propegated to subscriber, but when i make any change in subscription, the change is not reflected. i have tried a lot of options but no one worked. please help me.
When doing a pull subscription where the schema is also replicated, the snapshot fails with the message " The process could not create the file [machine name]D$MSSQL7ReplDataunc[Publisher Name]DateTable Name.sch
There is an OS Error Code of 5 saying Acces is denied.
The file mentioned above is created, so perhaps it fails trying to create a file for the next table.
I have a problem creating a pull merge subscription on a server that's outside of our firewall. All standard ports are blocked so MS UNC connections are not possible which SQL 2000 uses by default when creating a subscription. Equally FTP is out = insecure.
I found a procedure to that said create the snapshot of the publication, create a backup of the published database, restore that backup to the remote server as a subscription db and then sync using merge. Didn't work, failed (several times).
Can anyone enlighten me as to what I'm doing wrong or indeed if I'm doing anything correctly!
I can create a remote desktop (Term Server) connection to the remote and another back to the publisher (from the subscriber's desktop) and both connections are using SSH tunnels. SQL Server uses a non standard port to communicate over the firewall. The remote server sits behind another firewall/router with port redirection to it's private address. Each server has the other registered and there are no comms problems and indeed there are other replicated dbs between them.
Both servers are win 2003 and the remote (subscriber) is R2 version, both with SQL 2000 Server Std patched up to SP3. (if this has any bearing on the solution which I presume there is)
Many thanks for listening and I hope a few of you can answer as well
Can anyone help with how to recreate a pull subscription replication job after I had to recreate the msdb database when it was marked as suspect. I still have the subscription but cannot seem to recreate a pull replication job
As I understand replication in Sql2K the only difference in push or pull subscriptions is where the agent runs. If I wanted changes in the publisher to be sent to the subscribers immediately after the change then I thought push would be better. But, if I am equally interested in changes made at the subscriber then what should I use? Or does the agent monitor both the publisher and subscriber at the same time?
I have setup a pull subscription on the subscriber for transactional replication. The distribution job continues to run, but doesn't do anything because it says: The initial snapshot for publication 'man4' is not yet available.
How can I tell if the snapshot is running, and can I see the snapshot where it was created?
I am trying to enable a replication process between a SQL 2005 server and sqlexpress instances and i run into the following problem.
On the publisher a subscription (sp_addmergesubscription) is added for each 'machine' that participates in the replication. Is there a way to get around this?
Because when we distribute the installation we dont know all the machine names. I have made the publication accesible for anynymous access. But when the replication script is installed on the client ,the Error message that the subscription does not exists appears.
The only difference between the instal script for the client is that we do not add a sp_addmergesubscription on the server. Is it possible to let SQL server make an subscription when the client connects for the first time?
To summarize my question: Is there a way to enable the replication with only running a script on the client and not on the server?
If i need to explain it more in detail , just let me know and ill try
Say we need to replicate between 2 databases using transactional replication
So we create a publication on the first server and initialse the publication agent so that it takes a snapshot and starts the log reader to capture the transactions being keyed into it.
Then say we create a pull subscription from the second database but lets say we assume we already have the data from thepublication database already in it so no need to app,ly a snapshot over it, when the pull subscription starts we assume that only transactions in the log reader that occured AFTER the pull subscription was started would be applied. Is this correct?
Then say we need to stop the pull subscription for a short period then start it again (let say so that we can take a back up of the subscriber database and restore the database somewhere else and replication set up between these 2 with no chance of data being althered before the restore had finished) can someone confirm when we start the pull subscription again all the transactions that occurred during the stopped period will be applied when it is started again OR will it be the case that only the transactions since the pull subscription was restarted will be applied
I am using RMO to synchronize an updateable transactional pull subscription from Sql Express SP2 to Sql Server 2005 64-bit Standard Edition. The data propogates from the server to the client, but changed data on the client does not replicate to the server. Any ideas?
I've a merge rep running with 4 subscribers for a while. Now I wanted to add another subscriber and when I open the publisher in the pull subscription assistant dialog, there are no publications in it. (even not if i switch to "allow anonymous sub") But every- thing seems to be alright wirh the publication itself! It even doesn't work to select the publication in a pull subs. from an other db on the same server! Any ideas?
Can push and pull subscriptions be configured on the publisher/distributer server?
We have server A running SQL Server 2000 configured as Publisher/Distributor and also a Push subscription (transactional replication) to Server B configured as Subscriber.
The idea was to have Server B as backup server if Server A goes down. Users will continue to update data in server B till server A is up.
Once server A is up, I want to synchronise the up-to-minuit date from Server B to Server A in the form of Transactional replication configured as "Pull Subscription" from Server A.
I tried to use REPLMERG utility for Web synchronization and got the following error message in log file:
2007-03-23 14:35:10.484 The subscription to publication 'X' could not be verified. Ensure that all Merge Agent command line parameters are specified correctly and that the subscription is correctly configured. If the Publisher no longer has information about this subscription, drop and recreate the subscription.
The case description is as the following:
REPLMERG utility command line:
"C:Program FilesMicrosoft SQL Server90COMREPLMERG.EXE" -ExchangeType 3 -Publication X -
I've been having an error when downloading the snapshot agent from our Publisher.
The articles selected are all the tables and all the stored procedures.
The Subscription is created programmatically and so is the synchronization. When trying to synchronize for the first time and when the subscriber tries to download the snapshot I have the following error:
Error messages: The schema script 'Distrito_2.sch' could not be propagated to the subscriber. (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147201001) Get help: http://help/MSSQL_REPL-2147201001 The process could not read file 'GESZifuncAFRODITE$SILVITEST_GESZIF_GESZIF20070621182845Distrito_2.sch' due to OS error 3. (Source: MSSQL_REPL, Error number: MSSQL_REPL20143) Get help: http://help/MSSQL_REPL20143 The system cannot find the path specified. (Source: MSSQL_REPL, Error number: MSSQL_REPL3) Get help: http://help/MSSQL_REPL3
The snapshot folder is at c:GESZifSnapshotFolder and the unc is \AfroditeSnapshot.
I'm getting a little desperate with this because we really need to propagate the schema changes around the subscribers.
We have setup transactional replication between 2 databases on SQL Server 2000 SP3a (~70GB), using a concurrent snapshot (to prevent locking out of the live database) to initilaise the data and a pull subscription from the second database.
From analysing the msdistribution_history table in the distribution database on the subscriber it appears that the snapshot is being applied in a continuous loop to the subscriber database. Viewing the comments column in the msdistribution_history table we can see the following sequence of events occuring
Initialising Applied script 'snapshot.pre' Then it applies all the schema files .sch Then it applies all the index files .idx The it bulk copies the data in (bcp) Then it creates the Primary Keys Then it applies all the trigger files .trg Then it applies all the referential integrity files .dri
These all complete successfully but then the process kicks off again immediately after reapplying the snapshot. We are unaware of any settings that may be causing this.
Any help on what maybe causing this would be much appreciated.
I can't see what is going on, this is the situation:
I call the Pull method, specify the table to be affected, the query to be used, the connection string to the remote SQL server, the tracking options (On) and the Error table. The pull method executes with no errors however, no table is ever created. I don't know why, here's what I have done so far:
I read the SQL BOOKS ONLINE help on preparing RDA, I set up the IIS virtual directory for anonymous access and on the connection string I send in the user name and password for the SQL server, I went into the SQL Server and grated access to the user name to the database that I am going to access and I made the user a db_owner.
So, according to SQL BOOKS ONLINE I have everything right however, it won't populate, so right now I am open to suggestions on how to get this to work, heres the code: ------------------------------------------------------------------------------------------------------------------ string rdaOleDbConnectString = "Provider=SQLOLEDB;Data Source=<Server>;Initial Catalog=<DB>; User Id=<User>;Password=<Password>"; (it's not exactly like this, but in it has the proper values) string connectionString = "Data Source="\Program Files\client\db\MobileDB.sdf"";
SqlCeRemoteDataAccess rda = new SqlCeRemoteDataAccess("http://10.1.1.206/mobile/sqlcesa30.dll", connectionString);
IList _tableNames = new ArrayList(); IList _queries = new ArrayList();
############ Code that prepares tables and queries ############
I have a client who is getting an error when they try to create a report subscription. The error is as follows:
An unexpected error occurred: A subscription delivery error has occurred. ---> A subscription delivery error has occurred. ---> One of the extension parameters is not valid for the following reason: The account you are using does not have administrator priviledges. A subscription cannot be created for [email address].
The thing I find strange is that the client was able to create a shared schedule with no problems, so I don't see how they don't have administrator privileges. The shared schedules and subscriptions are created programmatically through a web application if that is of any importance.
I am wondering if there is some sample code out there that shows how to create a subscription for a report on reporting services via a win app or if anyone has a better suggestion. We are wanting to have a report that resides on reporting services server be sent to a client via email subscription, but do not want the client to goto the actual website that host reporting services. Thanks in advance.
I am trying to publish / subscribe a database onto SQL Server Mobile and when I run the following code that was, for the most part, generated by the SQL Server Management Studio Subscription Wizard,
I am trying to create a merge publication in sql server 2005 and a merge subscription in sql server 2005 mobile through transact sql using sql server query analyzer.
I am succeeded in creating the publication but not subscription.
I am using sp_addmergepublication and sp_addmergesubscription.
sp_addmergepublication is working fine.
But the problem is in creating sp_addmergesubscription.
Can anyone please guide me how to create subscription to sql server 2005 mobile database using transact sql.
I am having a HUGE issue with SSRS, I am running SQL 2005 on Win 2003 server, the SQL uses SQL and windows permissions.
I have a datasource which stores it credentials securely on the server but for some reason when i try to subscribe to the report it errors saying
"Subscriptions cannot be created because the credentials used to run the report are not stored, or if a linked server the link is no longer valid."
Beats me but the credentials are stored, I am connecting using a user account which can run the report fine (This is proven).
I have SP1 installed, and have literally tried every last option in the book.
N.B i have read all the existing post about this and i seem to have a different issue, I am not using any paraeters in the report i am trying to test and i dont use anything like USR!USERID
When I try and create a subscription in SQL Server Mobile to a published SQL Server 2005 database, I get the following problem error during the data synchronization process: Failure to connect to SQL Server with provided connection information. SQL Server does not exist, access is denied because the IIS user is not a valid user on the SQL Server, or the password is incorrect. HRESULT 0x80004005 (29061)
Using SS2005, I am trying to create a Data-Driven Subscription to query off a value. I have the value in my stored procedure like:
Procedure dbo.sp_ReportMaster @myid int=null
When I run the report in the Reporting Services, it prompts for myid, which is fine. I then deployed the report to the Reports Manager and tried to create a Data-Driven Subscription. Where it says specify a command, I put in exec sp_ReportMaster. I put in the pertinent information, then it says, "The 'ReportMaster' has no parameters," even though I have the parameter in my stored procedure and I put myid as a parameter in my report in Reporting Services.
I don't know why it shows parameters in Reporting Services when I run the report from there, but when I try to create the subscription, it shows that I don't have any parameters.
We have this sporadic problem where when we go in to save an edit on a SSRS report subscription, it gives us a duplicate job number error. When I look at the Jobs in the Agent, there are duplicates, so I need to manually delete both duplicate jobs, then the subscription save will work. If we delete just 1 of the jobs, the issue seems to clear for a while, but then reoccurs. This has happened to us on multiple reports, but not consistently. The subscriptions look fine.
I'm developing a Windows Mobile application, which is using RDA Pull for retrieving data from SQL Server 2005 database to PDA. Please, see the example:
Code Snippet
using (SqlCeEngine engine = new SqlCeEngine(connStr))
the sqlcesa30.dll cannot connect to SQL Server database.
In the sqlcesa30.log then I found following line:
Code Snippet
2007/04/17 10:43:31 Thread=1EE30 RSCB=16 Command=PULL Hr=80040E4D Login failed for user 'test'. 18456
The user 'test' is member of db_owner, db_datareader and public roles for the Demo database and in SQL Server Management Studio I'm able to login to the Demo database with using the 'test' users credentials and I'm able to run the select command on 'mytable'.
So, what's wrong? Why the sqlcesa30.dll process cannot login to the Demo database, and from another application with using the SAME connection string it works?
It seems to me that if a scheduled SSRS report subscription fails ( Status Message - An error has occurred during report processing) , that I actually need to delete the subscription and reconfigure it from scratch. The scheduled job doesn't try to run again automatically (say the next Monday on a weekly Monday schedule).
Is there a way to "reset" a failed subscription without have to recreate the entire subscription?
