Creating VirtualDeviceSet For Remote SQL Server 2005 Failed.
Mar 13, 2007
Hi, all!
I am writing the VDI application to allow backup/restore MS SQL Server 2005. I would want to backup/restore remote servers as well as local. I have local instance of MS SQL 2005 and remote. Local instance has MSSQL2005_ZORG instance name, remote uses default (so it supposed to be MSSQLSERVER).
While connection to those server via SQL Server Management studio i see local server as "ZORGMSSQL2005_ZORG" and remote as "VM2000SRVZ2".
When i try to create VIrtualDeviceSet via CreateEx i pass "MSSQL2005_ZORG" as lpInstanceName parameter and all works fine. But I could't create same device set for remote 'MSSQLSERVER' instance. I passed any combination for that, such as "VM2000SRVZ2MSSQLSERVER", "MSSQLSERVER", "VM2000SRVZ2", "\VM2000SRVZ2MSSQLSERVER" and so on. No luck always get VD_E_INSTANCE_NAME (0x80770007).
Any idea?
--Thanks
View 1 Replies
ADVERTISEMENT
Aug 30, 2006
When I create a new odbc connection to a SQL server 2005 Db I get a failure telling me dat de SQL server does not allow remote connections.
How can I allow the server to allow this.
Any help appreciated
regards
View 1 Replies
View Related
Sep 19, 2007
Hi all,
In my office computer network system (LAN), my Windows XP Pro PC has SQL Server Express and VB 2005 Express installed and I was granted to have the Administrator priviledge to access SQL Server Express. I tried to create a SQLCLR project in my terminal PC.
1) I tried to set up a remote connection to SQL Server Express in the following way: SQL Server EXpress => SQL Server Surface Area Configuration. In the Surface Area Configuration for Service and Connection - local, I clicked on Remote Connection of Database Engine, SQLEXPRESS and I had a "dot" on "Local and remote connections" and "Using TCP/IP only". Then I clicked on "Apply" and "OK" buttons. Then I went to restart my database engine in SQL Server Management. When I went to check SQL Server 2005 Surface Area Configuration, I saw the arrow is pointing to "Service", not to "Remote Connections"!!!??? Is it right/normal? Please comment on this matter and tell me how I can have "Remote Connecton" on after I selected it.
2) After I restarted the database engine (I guess!!), I executed the following project code (copied from a book) in my VB 2005 Express:
//////////////--Form9.vb---/////////////////
mports System.Data.SqlClient
Imports System.Data
Public Class Form9
Dim cnn1 As New SqlConnection
Private Sub Form5_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
'Compute top-level project folder and use it as a prefix for
'the primary data file
Dim int1 As Integer = InStr(My.Application.Info.DirectoryPath, "bin")
Dim strPath As String = Microsoft.VisualBasic.Left(My.Application.Info.DirectoryPath, int1 - 1)
Dim pdbfph As String = strPath & "northwnd.mdf"
Dim cst As String = "Data Source=.sqlexpress;" & _
"Integrated Security=SSPI;" & _
"AttachDBFileName=" & pdbfph
cnn1.ConnectionString = cst
End Sub
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
'Create a command to create a table
Dim cmd1 As New SqlCommand
cmd1.CommandText = "CREATE TABLE FromExcel (" & _
"FirstName nvarchar(15), " & _
"LastName nvarchar(20), " & _
"PersonID int Not Null)"
cmd1.Connection = cnn1
'Invoke the command
Try
cnn1.Open()
cmd1.ExecuteNonQuery()
MessageBox.Show("Command succeeded.", "Outcome", _
MessageBoxButtons.OK, MessageBoxIcon.Information)
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
End Sub
Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
'Create a command to drop a table
Dim cmd1 As New SqlCommand
cmd1.CommandText = "DROP TABLE FromExcel"
cmd1.Connection = cnn1
'Invoke the command
Try
cnn1.Open()
cmd1.ExecuteNonQuery()
MessageBox.Show("Command succeeded.", "Outcome", _
MessageBoxButtons.OK, MessageBoxIcon.Information)
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
End Sub
Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click
'Declare FromExcel Data Table and RowForExcel DataRow
Dim FromExcel As New DataTable
Dim RowForExcel As DataRow
FromExcel.Columns.Add("FirstName", GetType(SqlTypes.SqlString))
FromExcel.Columns.Add("LastName", GetType(SqlTypes.SqlString))
FromExcel.Columns.Add("PersonID", GetType(SqlTypes.SqlInt32))
'Create TextFieldParser for CSV file from spreadsheet
Dim crd1 As Microsoft.VisualBasic.FileIO.TextFieldParser
Dim strPath As String = _
Microsoft.VisualBasic.Left( _
My.Application.Info.DirectoryPath, _
InStr(My.Application.Info.DirectoryPath, "bin") - 1)
crd1 = My.Computer.FileSystem.OpenTextFieldParser _
(My.Computer.FileSystem.CombinePath(strPath, "Book1.csv"))
crd1.TextFieldType = Microsoft.VisualBasic.FileIO.FieldType.Delimited
crd1.Delimiters = New String() {","}
'Loop through rows of CSV file and populate
'RowForExcel DataRow for adding to FromExcel
'Rows collection
Dim currentRow As String()
Do Until crd1.EndOfData
Try
currentRow = crd1.ReadFields()
Dim currentField As String
Dim int1 As Integer = 1
RowForExcel = FromExcel.NewRow
For Each currentField In currentRow
Select Case int1
Case 1
RowForExcel("FirstName") = currentField
Case 2
RowForExcel("LastName") = currentField
Case 3
RowForExcel("PersonID") = CInt(currentField)
End Select
int1 += 1
Next
int1 = 1
FromExcel.Rows.Add(RowForExcel)
RowForExcel = FromExcel.NewRow
Catch ex As Microsoft.VisualBasic.FileIO.MalformedLineException
MsgBox("Line " & ex.Message & _
"is not valid and will be skipped.")
End Try
Loop
'Invoke the WriteToServer method fo the sqc1 SqlBulkCopy
'object to populate FromExcel table in the database with
'the FromExcel DataTable in the project
Try
cnn1.Open()
Using sqc1 As SqlBulkCopy = New SqlBulkCopy(cnn1)
sqc1.DestinationTableName = "dbo.FromExcel"
sqc1.WriteToServer(FromExcel)
End Using
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
'Read the FromExcel table and display results in
'a message box
Dim strQuery As String = "SELECT * " & _
"FROM dbo.FromExcel "
Dim str1 As String = ""
Dim cmd1 As New SqlCommand(strQuery, cnn1)
cnn1.Open()
Dim rdr1 As SqlDataReader
rdr1 = cmd1.ExecuteReader()
Try
While rdr1.Read()
str1 += rdr1.GetString(0) & ", " & _
rdr1.GetString(1) & ", " & _
rdr1.GetSqlInt32(2).ToString & ControlChars.CrLf
End While
Finally
rdr1.Close()
cnn1.Close()
End Try
MessageBox.Show(str1, "FromExcel")
End Sub
End Class
//////////////////////////////////////////////////////////////////////////////
I got the following error messages:
SecurityException was unhandled
Request for the permission of type 'System. Security. Permissions.FileIOPermission,mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'failed that is pointing to the code statement "Dim int1 As Integer = InStr (My.Application.Info.DirectoryPath, "bin")."
Troubleshooting tips:
Store application data in isolated storage.
When deploying an Office solution, check to make sure you have fulfilled all necessary requirments.
Use a certificate to obtain the required permission(s).
If an assembly implementing the custom security references other assemblies, add the referenced assemblies to the full trust assembly list.
Get general help for the exception.
I am a new Microsoft VS.NET Express user to do the SQL Server 2005 Express and VB 2005 Express programming by using the example of a tutorial book. Please help and tell me what is wrong in my SQLCLR sep-up and project coding and how to correct the problems.
Many Thanks in advance,
Scott Chang
View 3 Replies
View Related
Oct 18, 2007
for past few days this is making me mad. i have enables tcp/ip connections, have tried diffrent domain logins,enabled mixed mode but still when i try to connect remotely to SQL Server 2005 it give me which is as follows
general network error - check your network documentation
ConnectionOpen (PreLoginHandshake())
kindly help me
View 3 Replies
View Related
Feb 9, 2006
I followed the steps outlined in a blog I found to setup SS2005 express for remote connections. Everything appeared to go smooth until I actually tried to logon ;)
I have Sql Server 2005 Express installed on my WinXP PRO machine at home (no domain). I have opened the ports on the firewall, etc.
When I try and login from the SQLCMD command line tool I get a Login Failed error. Here is the connection string that I'm trying to use:
SQLCMD -S **.***.**.*SQLEXPRESS -U Steve -P MyPassword
The error:
Login failed for user 'Steve'.
When I use Management Studio Express on the same machine running Sql Server, it shows the User name: NEVERSTILLSteve
'NEVERSTILL' is the name of my computer.
If I try and use that same username with a remote connection I get the same error.
I have googled for the error and msg code, but nothing fitting my situation is coming up.
Anyone have any ideas for me?
View 1 Replies
View Related
Jun 7, 2008
i have a function
Create Function ReturnAmountB(@CMID int) Returns Decimal
as
BEGIN
declare @Return decimal
select @Return =sum(PD_PaymentAmount) from Payment_Details where
PD_IsRefund=1 and PD_PaymentType=0 and PD_CMID=@CMID
return @Return
END
when i run this on server(remote) this error shows...
Incorrect syntex near 'Function'
Must declare the variable '@CMID'
A RETURN statement with a return value cannot be used in this context
i am not able to understand why this error shows...
Any solution!!!
spandey
View 6 Replies
View Related
Mar 26, 2007
hello,
im trying to create an ODBC data source from a SQL SERVER 2005 database located in a remoted pc.
Client----------->PC1 : win 2000 sp4, not sql server
Remote server--->PC2 : win 2000 sp4, sql server 2005 express
From the Command Prompt, im typing "ping PC2" successfully.
After, in the ODBC datasource administrator-->System DNS tab, i choose "sql server" as a new data source , and in the server box , i'm typing PC2/SQLEXPRESS.
In the next steps, im typing the user-passwords.
The error :
connection failed
...
[microsoft][odbc sql server driver][named pipes]ConnectionOpen(CreateFile()).
Connection failed:
SQLState: '08001'
..
Client unable to establish connection
What goes wrong?
I follow the same steps locally, and everything is OK.
Sorry for my bad english:cool:
View 2 Replies
View Related
Jul 18, 2006
Dear all,
I now have 2 server, say serverA and serverB. ServerA has a SQL server and I am using a command in the SQL server to access the serverB. The command is:
declare @command varchar(500)
set @command = 'mkdir ' + '"\serverBabckevin_wong123"
exit'
exec master.dbo.XYRunProc
'cmd.exe',
'c:',
@command
where abc is a shared folder in serverB which can be accessed by serverA. However the output of this execution is "c:> mkdir "\serverBabckevin_wong123" Access is denied". It is possible to do this in command prompt. Does anyone know what's the problem of this?
Thank you very much!!
Kevin
View 1 Replies
View Related
Feb 13, 2006
Hi,
i created a SSIS package to import data to a remote sql server, using the following connection string:
"Data Source=My-SQL;User ID=PortalUser;Password=Password;Initial Catalog=TestOMIWarehouse;Provider=SQLNCLI.1;Auto Translate=True;";
and got an error "Login failed".
When i give PortalUser a sysadmin server role, it works. But i don't want to give PortalUser a sysadmin role. Any suggestions? Is sysadmin role required to access a remote server using Sql server authentication?
thanks! Any help would be appreciated.
alea
View 4 Replies
View Related
Jun 20, 2011
I can't access SQL Server 2008 R2 remotely on Windows 2008
1. TCP/IP Enabled for SQL Server Network Configuration Protocols, SQL Native Client 10.0 configuration clients, and SQL Native Client 10.0 configuration clients(32 bit)
2. Firewall disabled to make sure its not interferring with things.
I noticed the SQL Server Agent is Stopped. Not sure if this is the issue. When I try and turn this from disabled to Automatic or Manual, I get this error:
Remote procedure call failed (0x800706be)
It shouldn't be this difficult.
View 23 Replies
View Related
Mar 1, 2008
Hopefully there's an easy answer for this. I'm totally new to SQL server and I'm trying to upsize an Access database. Whether I use the upsizing wizard or try to create a data source through the ODBC Data Source Administrator, I get a connection failed error. It tells me the server does not exist or my login is incorrect. I'm using NT authentication to connect to the server on my local drive. I just installed the whole 2005 express edition and the only thing that came up during the install was that I didn't have IIS installed. I didn't see how that would be relevant, so I went ahead with the install.
Shouldn't this work with the default setup? I've searched around trying different "solutions" although I doubt they were specifically related to this very basic problem. I tried giving my login every right I could find through in the database engine properties in the server management studio, which connects fine itself with just my network login name and no password. What am I missing?
View 3 Replies
View Related
May 12, 2006
command in principal server
ALTER DATABASE database name
SET PARTNER = 'TCP://<mirror_server_name>:5022'
return:
Msg 1413, Level 16, State 1, Line 1
Communications to the remote server instance 'TCP://<mirror_server_neme>:5022' failed before database mirroring was fully started. The ALTER DATABASE command failed. Retry the command when the remote database is started.
This problem is only in production database any testing database include adventureworks mirroring sucessfuly. Why is problem:?
size? database > 9GB
slow HW? Principal database Intel D 3Ghz,4GB RAM, 4x 15k RPM HDD RAID 5 / Mirror database 2x Xeon 3Ghz,4GB RAM,6x HDD 10k RPM RAID 10
Slow LAN? both servers connect 1Gb/s
please help me
THX
View 17 Replies
View Related
Jul 25, 2007
Hello, How are you?
I have a problem when I try to create a new connection with Microsoft SQL Server 2005 Compact Edition from Visual Studio 2005 IDE. When I€™m going to choose the data source, the SQL Server 2005 Compact Edition provider doesn€™t appear in the list. I installed the SQL Server 2005 Compact Edition from this page http://www.microsoft.com/downloads/details.aspx?FamilyId=%2085E0C3CE-3FA1-453A-8CE9-AF6CA20946C3&displaylang=en. In the additional information says by installing SQLServerCE31-EN.msi installs the provider (System.Data.SqlServerCe.dll) in the GAC (global assembly cache) and registers the OLEDB provider (sqlceoledb30.dll). So, I don€™t understand why couldn€™t I create a new connection with Microsoft SQL Server 2005 Compact Edition from Visual Studio 2005 IDE?
I appreciate your help€¦
View 6 Replies
View Related
May 30, 2008
Just installed SQL Server 2005 and tested my old VS 2005 ASPnet websites, which were connected toSQL Server 2000 databases before. All my websites were created for local HTTP applications, coded with a connection string with User ID and Password. The SQL Server 2000 was configured as mixed authentication (i.e. with User ID and Password). These websites worked very well with SQL Server 2000 database server.Testing my old VS 2005 websites with SQL Server 2005 database, showed a 'Login failed for a User ''.' error msgalthough the 'Test Connection' on VS 2005 design showed a perfect query for e.g. a GridView control. I have assured that the UserID/Password were correct for Management Studio Security object'slogin and Database Security's user. The server instance was configured with mixed authentication mode. One thing I am not sure of is, when clicking the Management Studio icon, a Connection dialog showed up, asking for a Windows or MIxed authentication? I just stayed with the Windows authentication. What does the authenticationmode have anything to do with the VS 2005 website connection? Should I change to mixed authetnication mode?TIA,Jeffrey
View 3 Replies
View Related
Apr 17, 2007
Hi,all BI experts here,
Thank you very much for your kind attention.
I am having a problem with connecting to SQL Server 2005 database from Office Business Scorecard Manager 2005 (the connection string i am using is: provider=SQLOLEDB;Data source=server_name; Initial catalog=database_name). But the connection failed. Would please any experts here shed me any light on what is the problem and how to fix it then? As there is no any forum for Office Business Scrorecard manager 2005. Therefore I post my thread here as it is related to the connection to SQL Server 2005 database engine, thought here is the best place for this question.
Thank you very in advance for your kind advices and help. And I am looking forward to hearing from you soon.
With best regards,
Yours sincerely,
View 6 Replies
View Related
Aug 15, 2007
Running [dbo].[insertlogin] ( @log = hiten, @pas = hiten ).A .NET Framework error occurred during execution of user-defined routine or aggregate "insertlogin": System.Data.SqlClient.SqlException: Must declare the scalar variable "@Log".System.Data.SqlClient.SqlException: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnectionSmi.EventSink.ProcessMessagesAndThrow(Boolean ignoreNonFatalMessages) at Microsoft.SqlServer.Server.SmiEventSink_Default.ProcessMessagesAndThrow(Boolean ignoreNonFatalMessages) at System.Data.SqlClient.SqlCommand.RunExecuteNonQuerySmi(Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at SqlServerProject1.StoredProcedures.insertlogin(SqlString log, SqlString pas).No rows affected.(0 row(s) returned)@RETURN_VALUE = Finished running [dbo].[insertlogin]. ***************************************************************all i am trying to do is : creating a SP in VS using managed code and then trying to execute it. But every time i get the above error. If you can tell me how to edit connection string in this that would be very helpful. At present i am using : Using conn As New SqlConnection("context connection=true") I tried to do "" ALTER ASSEMBLY SqlServerProject1 WITH PERMISSION_SET=EXTERNAL_ACCESS""but i get this error "" Msg 10327, Level 14, State 1, Line 1ALTER ASSEMBLY for assembly 'SqlServerProject1' failed because assembly 'SqlServerProject1' is not authorized for PERMISSION_SET = EXTERNAL_ACCESS. The assembly is authorized when either of the following is true: the database owner (DBO) has EXTERNAL ACCESS ASSEMBLY permission and the database has the TRUSTWORTHY database property on; or the assembly is signed with a certificate or an asymmetric key that has a corresponding login with EXTERNAL ACCESS ASSEMBLY permission. If you have restored or attached this database, make sure the database owner is mapped to the correct login on this server. If not, use sp_changedbowner to fix the problem.""" *********************************************************************Plz help
View 13 Replies
View Related
Aug 23, 2006
Fellow Devs,
I have an instance of SQL Server Express 2005 running on another box and I have Remote Connections enabled over both TCP/IP and Named Pipes, but on my other box I keep getting the error that the server does not accept Remote Connections.
Any ideas why this might be happening? Is there some other configuration?
View 25 Replies
View Related
Jan 22, 2008
My site works fine in VWD2008 express, but I get this error when I try to use it on my live website.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
According to this article: http://support.microsoft.com/kb/914277 I am supposed to:
1.
Click Start, point to Programs, point to Microsoft SQL Server 2005, point to Configuration Tools, and then click SQL Server Surface Area Configuration.
Ok, there is no such program in this folder. The only thing in there is "SQL Server Error and Usage Reporting"...
The other thing I am greatly concerned with is this: All is want is for my webpages to be able to access my database for user authentication. I DO NOT want to grant the internet rights to remote connect to my database.
View 4 Replies
View Related
Apr 15, 2006
Hi!
I have this problem:
When I try to open database table under database explorer in VWD 2005
EE, it says that it failed to attempt connection due to user instance
and the connection will be closed.
When I try to right click on my database's file name under database
explorer and click connection to set the connection setting and click
on "Test Connection", it says the same thing.
This happen sometime, but after I restart my computer, I am able to access my database file again.
Anybody have any idea what's going on?
thanks !
View 1 Replies
View Related
Aug 17, 2007
I had made an application which is using SQL Expresss.When I deploy that application on a server where only .Net Framework 2.0 is installed then it gives an error of remote connection.Does that need some prerequisite for SqlExpress or the reason of error is something else.
View 3 Replies
View Related
Feb 15, 2008
I am trying to connect to remote sql server 2005, I am using the Full Name of SERVER (computername.domain) and on server , Local and Remote connections are checked under Surface area configuration settings.
i am getting this error:
....... under the default settings SQL Server deos not allow remote connections.
Should I choose TCP/IP and named pipes option????
Thanks,
Fahim.
View 4 Replies
View Related
Jun 22, 2007
I am trying to read the databases attached to the Sql Server 2005.... my code works fine for Sql Server 2000 but when i try it with Sql Server 2005 it gives me error that "Under Current Settings SQL Server 2005 does not allow remote connections".
Can anybody tell me where to change these settings... i tried my best to find it but :(....
View 1 Replies
View Related
Sep 3, 2007
Hello,
I have SQL Server 2005 express loaded on my webserver and I have loaded
SQL server studio manager on another terminal. When I try to
connect to the SQL Server it tells me that i can't and because the SQL
server does not allow remote connections. How do I fix that?
View 2 Replies
View Related
Sep 8, 2007
got the following error in my site. am using visual studio 2005 vb.net sql server 2005. my webhost (philhost.net) said that they support mssql server 2005. please help
Server Error in '/' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:
Line 16: Dim myConnection As New SqlConnection(strConnString)Line 17: Line 18: myConnection.Open()Line 19: Line 20: Dim myTrans=myConnection.BeginTransaction()Source File: E:inetpubvhosts\httpdocsDefault.aspx.vb Line: 18 Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +685966 System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +109 System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +383 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 _Default.Button1_Click(Object sender, EventArgs e) in E:inetpubvhostshttpdocsDefault.aspx.vb:18 System.Web.UI.WebControls.Button.OnClick(EventArgs e) +105 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +107 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +174 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
View 11 Replies
View Related
Jun 26, 2007
Hello Friends:
My problem relates to backing up my MS SQL 2005 database which is sitting on a shared server at a hosting company.
OVERVIEW:
- Hosting company is using MS SQL 2005
- I am using the SQL Server Management Studio that comes with SQL Server 2005 Standard (NOT Express), which is installed on MY PC.
- So, I am connecting to the SQL server over the internet
WHAT I WANT TO ACHIEVE:
- I would like to backup the data sitting on the Hosting company's MS SQL Server. I only have one database on this SQL Server. There are of course 100s of other databases on the same server which belong to other customers of the hosting company.
- I want to bring the backup to MY PC, from the SQL Server.
- As far as I can tell the following options within SQL Server Management Studio may be of help to me. I do not know which one I should use or which one is best or what is the proper method. 1) Select Backup option from the Tasks menu (but it only shows me drives/devices on the Hosting SQL Server, not my PC, so I can’t backup to my PC) 2) Export Data (it does not work, showing errors ‘…not a trusted connection…’ I have no clue what a trusted connection is. 3) Copy Database (which is supposed to copy the remote database on the Hosting company SQL server, to my local SQL Server running on my PC). I go through the wizard, on the last screen it just hangs i.e. shows- not responding)
MY QUESTION TO THE COMMUNITY:
How do I backup the database sitting on the hosting company SQL server? I of course need to bring the backup to my PC.
View 5 Replies
View Related
Feb 6, 2007
Snehalata writes "i have one database at sql server 2000 and i have one database at sql server 2005. now i have added linked server to sql server 2005. i wish to access database located at sql server 2000 from sql server 2005 by creating a view in database located at sql server 2005. but when i access database located at sql server 2000 from sql server 2005 i get error message
OLE DB provider "SQLNCLI" for linked server "OLDPARTNER" returned message "Login timeout expired".
OLE DB provider "SQLNCLI" for linked server "OLDPARTNER" returned message "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.".
wat should be done?
its urgent"
View 1 Replies
View Related
Aug 29, 2007
I have a software to connect the SQL Server as DB, and it is ok to connect to the SQL Server 2000 on the remote server in our firm, but got errors when doing the connection to the SQL Server 2005. the error messages are:
Error #1:
ADO Error #-2147467259
Description SQL Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF].
Source Microsoft SQL Native Client
Error #2:
ADO Error ##-2147467259
Description An error has occurred while establishing a connection to the server. When connection to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
Source Microsoft SQL Native Client
Error #3:
ADO Error ##-2147467259
Description Login timeout expired
Source Microsoft SQL Native Client
I'm using SQL Server 2005 version 9.00.1399.00, not the Express version. Should I update the SQL Server 2005 Network Configuration in SQL Server Configuation Manager? But I don't know what should be set to "Enable" or Disabled". Is any other place need be configured?
Thanks.
View 1 Replies
View Related
Jun 27, 2006
I am new to SQL Server and need to understand how to run DTS packages (SSIS) in SQL 2005 from a remote server? In other words run them from another server from where the database is installed.
I am looking for any links on the subject, guidance on how to set this up and how to use it.
Regards,
Lee
View 4 Replies
View Related
Jun 17, 2007
I have set up a SQL Server 2005 to use for testing before moving to another production server. The server works fine when I connect to it with a program on the same computer but not when accessed remotely.
I have set it to to allow remote connections and use TCP IP only and have opened TCP port 1433 on the Windows XP firewall and am using the Teredo service on Port UDP 3544 Also the Server Browser service is running. The server is connected directly to the internet on a static IP (eg. 67.156.18.167) I have set the server to Windows authentication.
When I try to connect to the database from a data grid in Visual Studio on another computer it fails.
I am pretty surethat the problem is that I am not giving the correct information when asked to fill in the information for the data source to find the server as I am new to remote connections in SQL Server.
Thanks for any insight
View 13 Replies
View Related
Jan 25, 2008
I have an application developed by VB.NET 2005, and I need to install the Data base on a server to allow the clients access the data base from thier own computers, i need to allow all the functions on that data base (Insert, Update, and Delete).
I tried to do it by installing the SQL Server on a computer named (PC1) and the application on a computer named (PC2), and they are connected to the same subnet, I need to know what are the properties that I should do on the SQL Server in order to be visible through PC1 to make the connection string? And does the authintication mode affect the process?? whether it is Windows authintication or SQL Server Authintication??
Note: I am using SQL Server 2005 Developer Edition.
Thanking you in advance..
Mak
View 7 Replies
View Related
Feb 13, 2007
I am an application developer with an existing system developer in SQL Server 2005 Express and Visual Studio 2005.
I have installed the system I wrote at a physician's office, and it is working fine on a local computer utilizing XP operating system.
There is a requirement to allow other terminals to connect to this XP terminal to execute the application, so I am exploring possibilities for connecting remotely from the other computers in the physician's office.
I am running Virtual Machine for my client computer.
I modified SQL Server 2005 on my main computer. I enabled both TCP/IP and Named pipes in the SQL Server Surface Area Configuration utility. I also set SQL Server Browser to start automatically.
The local application is successfully connecting with the following connectionstring: Data Source=localhostsqlexpress;Initial Catalog=MedicalDB;Persist Security Info=True;User ID=sa;Password=thepassword
I realize that I would have to substitute the server name for localhost before I could connect from the application, but I wanted to first "connect" to the database from my second machine successfully before I began trying to connect from my application. I can Ping the pc that is running sql server express, I am able to "telnet" my pc that is running SQL Server Express.
Both my computers are in the same workgroup and there is no domain.
There are no aliases in my configuration, and there is no encryption on the server.
Ther error message I recieve is:
Cannot connect to DDD
An error has occurred while attempting connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under default settings SQL Server does not allow remote connections. (providor: Named Pipes Providor, Error: 40 Could not open a conneciton to Sql Server) (Microsofi SQL Server, Error: 1326)
View 1 Replies
View Related
Feb 23, 2006
This has probably been answered before, but...
I have a local SQL Server 2005 instance running, and I would like to have another user on my network connect to this instance. However, when he tries to connect, he always receives the same error message:
"An error has occured while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error 28: - Server doesnt' support requested protocol)"
So, I checked the properties for the server, and under the connections tab the allow remote connection box is checked.
Any clue where to look next?
View 7 Replies
View Related
Oct 11, 2006
Hello ,
The problem is that we are having Problem while making the remote Connection to the Sql Server 2005
Basically We are having a problem connecting to SQL2005 through a package remotely. when we try to connect to a remote data base, we get the following error
[Connection manager "CRA LRRS Development DB"] Error: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Login timeout expired". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "SQL Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF]. ".
Although by running the configuration manager on the Remote DataBase System we have enable the Remote Connections through name and IP both but still it cant access it.
Please tell us the possible consequences and provide us the feedback.
I will be really obliged if any of you can provide us the feedback on it as soon as possible.
Thanking You,
Yours Sincerely,
Saima Salim
View 1 Replies
View Related
