Creating A Form With Reporting Services

Sep 19, 2007



Hi,
I'm trying to create a form with reporting services. Basically I am trying to draw this form using lines that has 2 columns down the page. The problem I have is the fields can grow on either side of the page, so the lines will not line up. I have tried putting this in a list box and then text boxes inside of these, but this will not work. I have not been able to get just the line to work because it doesn't grow with the list either. Has anyone else been able to design a form like this? Any ideas/suggestions would be greatly appreciated!Thanks SQLNewbie1000

View 10 Replies


ADVERTISEMENT

Creating Subscriptions In Reporting Services

Mar 26, 2008



Hi

I am trying to create new subscription on on of my reports. but some reason when I right click on the subscription the create new subscription is disabled. I have same permissions on the other reports also but it is anabled. Is there any thing do I need to do to create new subscription. The data source on that report is shared.Please some body let me know. Thank you!

View 4 Replies View Related

Re-creating, The IIS Part Of Reporting Services 2005

Mar 14, 2007

Hi, i have a problem, i had an ASPX (ASP 2.0, VS2005) application installed on a 2003 server´s IIS, the application uses SQL server and reporting services, and it was installed and running smooth on the same server, a software provider came one day and for some reason uninstalled and then reinstalled my IIS instalation , the thing is that my reporting server stoped working because the reporting services Virtual Directories and Application Pools are gone, is there any way to recreate this part or is there a way to create it manualy, i tryed to uninstall reporting services in oreder to reinstall it but it doesn´t uninstall because it can not find the IIS entrys , please i need a solution for my problem, any help will be highly apreciated.

Amilkar Reyna

View 1 Replies View Related

Reporting Services :: Creating Cells Dynamically

Nov 2, 2015

i have a ssrs report in which i have creating rows with heading of months name from jan to dec i.e. jan|feb|mar|apr|....i have a parameter start date.i want when i enter start date from march supoose i enter date 03/22/2015 then display months from mar to dec.

View 5 Replies View Related

Reporting Services :: Creating Tabbed Report In SSRS

Mar 20, 2014

I am trying to create SSRS report with tabs. Something like this

Tab 1
Tab2
Tab 3
Tab4
Tab5

The end user will input a value which will be passed to all the DataSets (my case each Tab will display some information from a DataSet). So when the user clicks on Tab1, it will display relevant information form DataSet1 and when the user clicks Tab2, it will hide the Tab1 information and should display the Tab2 information from DataSet2.I am able to achieve the following:

1. Making the tab clickable
2. Navigating from one tab to another (dispalying relevant information for each Tab) - Using Go to BookMark or Go to Report Option in the Action Property

But I am not able to hide the inactive tab report data. I am building reports and deploying it in SharePoint 2010.

View 10 Replies View Related

Reporting Services :: Creating A Filter For Report Item

Aug 18, 2015

I am new to report builder. I have created a report with a calculated cell that returns a true or false value based on a true or false value from another column (from a dataset field). I want to create a filter for the calculated field (which is a ReportItem), that will only show cells that are True.

I have tried several ways to add this filter, but each time, I get an error message saying that filter or sorting cannot be created for ReportItems.

View 5 Replies View Related

Reporting Services :: SSRS Subscription Creating Duplicate Job

Jan 4, 2012

We have this sporadic problem where when we go in to save an edit on a SSRS report subscription, it gives us a duplicate job number error.  When I look at the Jobs in the Agent, there are duplicates, so I need to manually delete both duplicate jobs, then the subscription save will work.  If we delete just 1 of the jobs, the issue seems to clear for a while, but then reoccurs.  This has happened to us on multiple reports, but not consistently.  The subscriptions look fine.

View 7 Replies View Related

Reporting Services :: Creating A Child Column Group In A Table?

Nov 9, 2015

I have the following column values (which represent the hours in a day) - 

I want to be able to create a "child group" which would create 15 minute interval values under each hour, like - 

0   15   30    45    60 

So these would repeat under, each "hour" column value.

How can I do this ?

View 7 Replies View Related

Reporting Services :: Creating Datasource As ODBC With AS / 400 For SSRS Report

May 22, 2015

Data Source of the report is AS/400 and I need to create a report in visual studio 2013 with ODBC Connection type and deploy report onto share point 2013. How to create report, data source and deploy on share point.

My problem is how we will create ODBC connection with AS/400 and connect report with AS/400.

View 2 Replies View Related

Reporting Services Install Not Creating Virtual Directories In Default Web Site

Jan 29, 2008

Hi,

I have uninstalled and reinstalled several times and I can't get Reporting Services to create the virtual directories in Default Web Site, instead it creates a new web site called Report Server with the virtual directories under that, this Report Server website points to C:Program FilesMicrosoft SQL ServerInetPubwwwroot. Any ideas as to why this happens? My Default Web Site is called Default Website from the initial IIS install , I am on XP Pro SP 2 with IIS 5.1.
This is an issue for me since I don't want to have on another site that doesn't have the aspnet mapings.

I am dumbfounded and can't figure out what to do to make it not do that with the default configuration option checked during install. Should I uninstall and reinstall again and not use the default configuration?

Regards,

Chris

View 3 Replies View Related

Creating Simple Report Using Reporting Services SP2 And SharePoint 2007 Integration

Feb 1, 2007

I've been running around in circles all afternoon trying to create one simple report using Reporting Services (with latest SP2 installed) and SharePoint 2007. To the best of my knowledge, I have everything configured correctly:

When I access http://<server>/ReportServer, I see the server name of my SharePoint site.
When I click on the name of my SharePoint site, it shows me the directory structure I have created within my SharePoint Site
When I drill down in the directory, I can ultimately see the forms I created in my forms library (created via InfoPath 2007).

The next step is to create one simple report from the data in one of these forms libraries and a report on all the items within a form library. I'm stuck at the first step of creating a report, namely what to enter as the Data Source and the connection string. With a SQL database this isn't an issue.

How does one create a data source that will allow reporting over SharePoint content with the setup described above? And, if you have information that is found in the SQL Books Online, please be kind and post links so others know where to find this information.

View 5 Replies View Related

Reporting Services :: Creating Color Combination Logic For Matrix Report

May 7, 2015

I have created a matrix report having  "Probability"  in Row and "Impact" in Column  and "Risk ID" in Data Part .

Now the problem which I am facing is I need to fill matrix with different color value based on combination of Probability and Impact.

I am able to write the expression in "Fill" area of "Risk_ID" text box but the problem is only those text box gets colored which are having Risk-Id value in it like shown below.I want all text box to be colored even if no Risk_Id is there in any text box.

I am trying writing the correct logic so that all text box gets colored even if there is no Risk _Id in it.

View 6 Replies View Related

Creating A Database From A Form.

Feb 9, 2007

I've made a form and now all I want to do is save everything in the form into a new database file but I don't know how. I'm using Visual Web Developer 2005. Somehow I'm guessing that I have to set something somewhere so when the submit button is hit, it knows to save it to a database file which doesn't exist yet so it would have to create it. It should be easy but I can't figure it out.

View 1 Replies View Related

Creating SSRS In Form

Sep 22, 2007

hello there,

i am making a form in SSRS and display user details. the form uses only textbox to fill the data.but when i preview the form i just see the data for the first user.i dont see other users.what is the problem.please help

cheers
zolf

View 4 Replies View Related

Creating A View Form A Sequel Query

Apr 18, 2008

I've written a Union query that joins 16 different tables. I need to somehow make this into a permanent view so that i can query directly from excel to extract specific data - i guess i can set up excel to pull straight from this view then ?

I'm used to running excel VB code to SQL via Access (linking access up) but want to cut out the middleman now.

Any ideas ?

An example of the Union Query i have built is below :


SELECT[Vendor No_],[Posting Date],[Purchase (LCY)],[Buy-from Vendor No_],[External Document No_],[IC Partner Code]

FROM [NAV402].[dbo].[TESTCO Sweden$Vendor Ledger Entry]

WHERE[Posting Date]>='20070701' AND [Vendor No_] LIKE 'ZX%'

UNION

SELECT[Vendor No_],[Posting Date],[Purchase (LCY)],[Buy-from Vendor No_],[External Document No_],[IC Partner Code]

FROM [NAV402].[dbo].[TESTCO Taiwan$Vendor Ledger Entry]

WHERE[Posting Date]>='20070701' AND [Vendor No_] LIKE 'ZX%'

UNION

SELECT[Vendor No_],[Posting Date],[Purchase (LCY)],[Buy-from Vendor No_],[External Document No_],[IC Partner Code]

FROM [NAV402].[dbo].[TESTCO US$Vendor Ledger Entry]

WHERE[Posting Date]>='20070701' AND [Vendor No_] LIKE 'ZX%';


Thanks for any help you can give me.

PID

View 3 Replies View Related

Creating A Form With A Drop Down List Of The Foreign Key Values

Jun 19, 2002

I have the following tables in an SQL Server database.

Contact
=======
NameID
TitleID
Name

JobTitle
========
TitleID
Title

I'm trying to make a form to add entries to the Contact table that lets me associate a job title to a name by choosing it from a drop down list. I have been able to make it so I get a drop down list of TitleID but I need the Title field displayed. I haven't been able to do it. Does anyone have any tips on how to do this?

View 1 Replies View Related

Regarding Form Controls In Reporting Sql

Aug 8, 2007

I am doing 350 controls as in a form like in reporting service . Due to so many controls the reporting sql server after deployment the preview and report must be slow. and i will checked the data transmission in stored procedure from sql server it will be faster.I am having doubt in controls in form will be slower.


Is there any suggestions without decrement the controls and to be report will be faster.

View 1 Replies View Related

Modeling Registration Form And Reporting Help

Feb 24, 2007

I'm trying to determine the best approach to model tables for a registration form that will be used temporarily and then taken offline once the event is over. I'd like to either model the tables so that they were reusable for other registration forms or perhaps use another method to store the data, maybe using XML or some other method if that is possible?? I'm not sure.

Different registration forms would have different input fields thereby requiring different table structures. It seems inefficient to create tables that will only be used temporarily and then no longer used. So, I would need to remember to delete the tables after they have been used or they would just take up space.

The basic requirement for this registration form is to allow the user to fill out the required fields, submit, get a registration reciept confirming their registration and allow the administrators for the event to pull the data weekly or daily into an excel spreadsheet.

I can create a flat table and a stored procedure that inserts the data. I can also write the dts package that exports the data to an excel file, which would require my intervention. I'd like to have something more automatic without my intervention.

Any suggestions would be appreciated. I'm not sure the best approach for this. Is using tables the best way to go even if the tables aren't re-usable? Requiring my attention to delete afterwards.

What are the options to generate the excel reports without my intervention?

Thanks in advance for any help.

View 1 Replies View Related

Reporting Service Using Form Authentication

Mar 26, 2008

Does Report manager in Reporting Services 2005 support form Authentication?If so where can i go to enable it?

Thank you
Kenalex

View 1 Replies View Related

Migrate From 32bit 2000 Reporting Services To 2005 64bit Reporting Services

Mar 22, 2008



Hello,

I am trying to migrate my reports from SQL server 2000 reporting services 32bit to 2005 64bit. I am following the migration steps that MS specified.
Restored my Reportserver and ReportserverTempDB databases
Then I was using the configure Report services to upgrade these databases but I always end up getting the follwoing exception when I run the upgrade on the "Database Setup" configuration for 'ReportServerTempDB' database
System.Data.SqlClient.SqlException: Could not locate entry in sysdatabases for database 'ReportServerTempDBTempDB'. No entry found with that name. Make sure that the name is entered correctly.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Common.DBUtils.ApplyScript(String connectionString, String script)
at ReportServicesConfigUI.SqlClientTools.SqlTools.ApplyScript(String connectionString, String script)

It's driving me crazy, why is it looking for 'ReportServerTempDBTempDB' in the catalog instead of 'ReportServerTempDB'?
Is it possible to migrate from 32bit to 64bit?

Any help is appreciated

View 1 Replies View Related

Reporting Against SharePoint List Or InfoPath Form(s)?

Dec 19, 2006

Hello,

Anyone have any solid solutions for using Reporting Services 2005 to report against a SharePoint List and/or InfoPath Forms Document Library?

This seems to be a popular one for reporting against the SharePoint List, but it looks like there are some issues with it, such as getting it to work with Subscriptions...

http://www.teuntostring.net/blog/2005/09/reporting-over-sharepoint-lists-with.html

TIA!!

View 1 Replies View Related

Compatibility Of SQL Express Reporting Services With SQL 2000 Reporting Services

Dec 6, 2006

I'm attempting to obtain a cost effective solution for my existing customers to develop reports on their SQL 2000 Server installations using their Reporting Services 2000. With products like Visual Basic.NET 2003 becoming almost impossible to obtain, I have at least one customer who is running into a dead end.

One option possibly is the SQL Express with Advanced Services download, which has Reporting Services. My questions are as follows:

Can the report designer component of SQL Express Reporting Services be configured to connect to an external database (which would happen to be a SQL 2000 database) to establish its datasets?
Does the resultant designed report end up in an RDL file? If the customer published this report via the Reporting Services 2000 Report Manager, would the report be able to run?

Sorry for asking a question like this that I could probably answer on my own, but my customer needed this answer yesterday. I have scoured the web and microsoft sites - and posted a question on the official SQL Reporting Services cateogy ... in an attempt to answer the basic question of how to design reports for Reporting Services 2000 in the absence of Visual Basic.NET 2003 (or other .NET 2003 tools) with no success.

Thanks to anyone who can help.

-- Mark

View 1 Replies View Related

Accessing Report Services Using Form Authentication Against Active Directory

Nov 21, 2007

I hope someone can help.

I'm working on a web project that will display the reports in an iframe to the user. When I was using windows security It worked perfectly.

Now my boss wants me to use form based authentication instead that can authenticate against our current Active Directory. This is working perfectly and does authenticate correctly. The only problem is that when I load a report in the iframe http://myserver/reportserver/myreport-blah reporting services prompts the user to enter in windows credentials. Is there anyway to pass my form credentials to the report server so that the user doesn't have to log in again.

Both the report server and the web app are on the same server BUT in different virtual directories.

PS: I tried using the reportviewer control but it does not display things correctly. For example, I have use a multi select dropdown on the reports and it messes up the drop down when the user only has 1 selection (hiding the selection). If the user has more than one selection the drop down uses scroll bars. I would use the reportviewer control if it displayed exactly like it does when using alternate URL method.

Any help would be MUCH appreciated!

Thanks!

View 5 Replies View Related

Integration Services :: Import Data Form One Table To Another Server

May 27, 2015

import data form one table to another.Both table have different schema.Lets say

1. Employee(Empid, ename,address,designation,Joindate,DOB).
2.Person(name,address,DOB)

I need to import person table data into Employee table.

Note :

1 empid is auto increment
2. If Person.DOB is not present insert null into employee.DOB
3.JoinDate should be initialized with current date. 

Currently I am using

1.OLE DB Source
2.Data Conversion
3.OLE DB Destination.

View 11 Replies View Related

Reporting Services :: Localization Data In Reporting Services?

Jul 27, 2015

I work in a big project and we will begin in using reporting services as the base technique for reports and I will be responsible for this part. but I have a problem I will discuss in the following:

Currently: We use currently devexpress reports and we have 2 languages(Arabic and English). the data in tables saved in two ways (Arabic and English). when the end user change the language of the web site the report data language changed when run it.

Example:

we have table with (ID, NAME_AR, NAME_EN, JobTitle_AR, JobTitle_EN). designed report will display(ID, NAME_EN, JobTitle_EN) . but the end user change the language of the system the report will

dispaly(ID, NAME_AR, JobTitle_AR) 

Hint:this done pragmatically

how to do this in reporting services.

View 7 Replies View Related

One Form To Update Different SQL Tables Based Upon Form Selection

Apr 16, 2008

Hello,
My company Intranet has a form that agents can use to post their comments about the company to upper management, but our customer service department would like to modify the form so that the agent has to pick from a comment type.
The dropdown options on the form will be as follows:
ComplimentsComplaintsGeneral CommentsSuggestions
Each dropdown option has a designated table in a SQL DB.Using postback on the same page, I need to change which fields of the form are visible based upon which dropdown selection the user chooses, and I need the fields to then be inserted into the table that corresponds with the dropdown selection item.
For example: If the Compliments dropdown selection is picked, I need a text box to show for the user's location, the name of the customer, account number, and the message box. Once the submit button is clicked, the characters in these boxes need to be inserted into the Compliments table using its data adapter.
However, if the user selects Suggestions, the name of the customer and the account number should not be visible, since these fields do not exist and when the submit button is pressed, the Suggestions table should be updated.
If you need more information, I will provide whatever is needed.
As always, thanks for everyone's assistance.
Chris

View 3 Replies View Related

To Access Reporting Sevices (Report Manager, Reporting Web Services), Does One Has To Be An Admin On The Machine

Mar 12, 2007

Hi There,

Our DBA has installed reporting services on a server and now in order to access the report manager, one has to be an Admin on that Server. I am guessing that there is a mistake in the configuration of Reporting Services. Usually it should allow anybody who was added to the roles in the properties section of the Report Manager, right? I have also added the users to the DB..

Also I am using Windows Authentication to access Report Catalog items (Reporting Services is installed on Server2) from a web Application(deployed on Server1) and displaying the report using report viewer. For some reason, server1 has to be in an Admin role on Server2 to access the report catalog/report. This is kinda strange for me as I don't want everybody to be an Admin on Server2. Can anybody please point in the right direction?

Thanks.

View 3 Replies View Related

Reporting Services :: JIT Debugging Error When Reporting Configuration Manager Is Opened

Sep 11, 2015

We have installed SQL Server 2005 with reporting services.When tried to open getting errors as below: how to avoid such errors See the end of this message for details on invoking  just-in-time (JIT) debugging instead of this dialog box.

ReportServicesConfigUI.WMIProvider.WMIProviderException: A WMI error has occurred and no additional error information is available. ---> System.Runtime.InteropServices.COMException (0x8000000A)
  at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
 
[code]...

View 4 Replies View Related

Reporting Services Menu Does Not Appear When Install Reporting Service Add-in For SharePoint

May 14, 2008

Hi all,

I have some problem about reporting service add-in.

After I install reporting service add-in for SharePoint, reporting service menu does not appear in Application Management Tab in SharePoint Central Administration.

I try to uninstall and re-install again, it remain not work.

How can I solve this problem?

Thank you very much.

View 4 Replies View Related

Reporting Services :: Get Report Toolbar Using SOAP API In SSRS Reporting?

Nov 3, 2015

Is there any way to get the report toolbar using SOAP Api  in SSRS reporting.

View 6 Replies View Related

Reporting Services :: Real Time Reporting In SSRS?

Jun 19, 2015

We've got a requirement to build the real time report. user can browse report at any point of time and need to see the latest data(stock market) in the report.

I've few options down...

1. Directly point to OLTP database as source and write stored procedure to show result set.

2. Replicate the database and write the SP's to reports. To avoid pointing directly to OLTP db.

3. To build the datawarehouse with dim & facts to show it in reports. I prefer this as a standard method, but this would have some latency depending on trasaction load which will differ from the requirement.

View 3 Replies View Related

Reporting Services ReportServer DB Reporting - 3rd Party Tool ?

Jan 15, 2007

HI There

We are required to gather certain information regarding reporting services.

Which reports were requested, by whom , how long did they run for, what parameters were passed etc etc.

I see that the system tables do provide some of this information, is there a 3rd party tool or something we can use to gather all this type of information for us?

This is for reporting services 2000 and 2005.

Thanx

View 1 Replies View Related

How To Make The SSMSE To Return Whole Records Without Any Close Query Form And Re-create Query Form Operation?

Dec 25, 2007

Hi,
I got a problem.
I installed Microsoft SQL Server Management Studio Express 2005 version.
And I created a Compact database.
I created an connection in SSMSE to connect the database and opened a query form.
then, i run the following sql:

Select * from Table1

It returned 3 records to me.
After that, I used program to insert record into this table.
Then i ran this sql again, it still show me 3 records.
I closed the query form, and re-created a new query form, then run the sql, it returned 4 records to me.

Why? It's very strange and difficult to operate, right?
Is there anyone know how to make the SSMSE to return whole records without any close query form and re-create query form operation?

Thanks a lot!

And Merry X'max!!!

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved