Could somebody tell me how do we create a .NET Stored Procedure in Sql Server 2005 Express Edition and deploy and debug it against the database from Visual Studio 2005 or Visual Web Developer? Can some one also let me know which approach is faster among .NET stored procedure or T-SQL stored procedure?
Regards...
Shashi Kumar Nagulakonda.
How many Stored Procedure can I add to a database in SQL SERVER 2005 Express edition?
I remember that only 32 Stored Procedure can be added to a database in SQL SERVER 2005 Express edition,but now I can add over 32 Stored Procedure to a database from SQL Server Management Studio Express CTP! How many Stored Procedure can I add to a database in SQL SERVER 2005 Express edition?
I have in the past created stored procedures using SQL Server 2000. It was easy to do. Now I am using SQL Server 2005 and the whole process is different and confusing to me. I performed the following steps to create a stored procedure:
1.) In SQL Server management studio, I wen to the folder named "Stored Procedures"2.) I right clicked on this folder and selected "New Stored Procedure..."3.) A generic sql server stored procedure is created for me.4.) I modify the stored procedure and now want to save it?
Now where do I go from here? How should I properly save this new stored procedure and where should I save it?I noticed that a generic name is assigned such as SQLQuery13.sql, but I want to name it something else.
I actually saved the new stored procedure but I can't see it listed under the "Stored Procedures" folder. I even tried doing a refresh.
Hello..
I've installed Visual Basic 2005 express edition & tried to connect to SQL Server 2005 express edition. I noticed that VB2005 Express Edition doesn't have any OLEDB provider for SQL Server. The only OLEDB Provider is for M.Access. Is this correct? if so, what should i do if i want to connect SQL Server 2005 express edition with VB2005 express edition by using OLEDB connection type?
I really appreciate any respond from you guys.. Thank's and waiting for the good news..
Best regards,
VITRELLE
I have:
A server computer running SQL Server 2005 Enterprise Edition.
A industrial computer running SQL Server 2005 Express Edition.
And now also a Psion WorkAboutPro with CE 5 that should run SQL Server Compact Edition.
The industrial computer syncs its data with the server, basically saying "this has happened".
Now I want the Psion to sync with the industrial computer, but this sync must two-way.
I have tried to find a guide or something that can tell me "do this to sync" but the information i have found is sketchy at best.
If someone could point me in the right direction of a guide or something else it would be much appreciated.
Regards,
Björn
Hello,
I have been unable to create a replication from an SQL Server 2005 standard edition database to remote SQL Server 2005 Express Edition. The remote express edition is on a Virtual Private Server we are leasing from a hosting company. The name of the remote DB is similar to vs572.si-vs572.com. I can connect to this with SQL server authentication through Management Studio and also with SSIS. But, I have been unable to create a push subscription (I have tried a test push subscription with the same publication to a local SQL Express server here in our office and this works fine).
Here is the error message: SQL Server Replication requires the actual server name to make a connection to the server. Connections through server alias, IP address, or any other alternate name are not supported. Specify the actual server name, 'VS572SQLEXPRESS'.
The hosting company had originally installed a shared SQL server which would not support replication. They then installed SQL Express edition and I was hoping this would allow us to run a replication.
I tried to connect to VS572SQLEXPRESS with out any luck. I check the remote connections, made sure replication was installed, etc., but no luck.
Any help would be greatly appreciated!
Thank you,
Albert
I installed Visual Web Developer on my laptop running on Windows XP Professional (SP2). With this SQL server express edition too got installed. Then I installed SQL server management studio express to manage the databases
I used “windows authentication� to login the SQL server for the first time. Then I found sa password is already there. I was never given the opportunity to set this sa password during the installation. I tired to change it to my own password but I found that it’s not accepting any changes.
Then I tired to create a SQL server account and try to login. I was not allowed. Then through MSDN I got to know that Express Edition does not support mixed mode authentication by default but I have to select that during the installation. But the problem is I was never given the opportunity to select this authentication mode during the install ion.
I tired changing the registry values ( set LoginMode to ‘2�) as instructed in the MSDN to allowe mixed mode. Even after that still I’m not allowed to create sql server accounts with my own passwords. I’m allowed to create accounts but it doesn’t allow me to set the password; every time I check it had replace the password I set to some unknown password which I cannot see due to masking.
Can anyone offer me some advice to understand what’s happening?
Hello!M a newbie.. I just want to know, that wots the difference b/w SQL Server Standard Edition and Express Edition.?And can I use Visual Studio 2005 (Professional Edition) with SQL Server Express Edition.?
View 1 Replies View RelatedHi all,
I have 2 sets of sql code in my SQL Server Management Stidio Express (SSMSE):
(1) /////--spTopSixAnalytes.sql--///
USE ssmsExpressDB
GO
CREATE Procedure [dbo].[spTopSixAnalytes]
AS
SET ROWCOUNT 6
SELECT Labtests.Result AS TopSixAnalytes, LabTests.Unit, LabTests.AnalyteName
FROM LabTests
ORDER BY LabTests.Result DESC
GO
(2) /////--spTopSixAnalytesEXEC.sql--//////////////
USE ssmsExpressDB
GO
EXEC spTopSixAnalytes
GO
I executed them and got the following results in SSMSE:
TopSixAnalytes Unit AnalyteName
1 222.10 ug/Kg Acetone
2 220.30 ug/Kg Acetone
3 211.90 ug/Kg Acetone
4 140.30 ug/L Acetone
5 120.70 ug/L Acetone
6 90.70 ug/L Acetone
/////////////////////////////////////////////////////////////////////////////////////////////
Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming:
//////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
sqlDataAdapter.SelectCommand.Command.Type = CommandType.StoredProcedure
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class
///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors:
Error #1: Type 'SqlConnection' is not defined (in Form1.vb)
Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb)
Error #3: Array bounds cannot appear in type specifiers (in Form1.vb)
Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance,
Scott Chang
More Information for you to know:
I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly.
I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
I am currently downloading the mega-sized files for SQL Server 2005 Express Edition and was wondering if I was going to be able to install it onto my workstation alongside the SQL Server 2005 Developer Edition? Was hoping someone could advise. I did browse for an answer, but have not come across it yet. I know I'll find out once my download is complete, but that could be awhile :)
Thanks,
-Neil
Hello, How are you?
I have a problem when I try to create a new connection with Microsoft SQL Server 2005 Compact Edition from Visual Studio 2005 IDE. When I€™m going to choose the data source, the SQL Server 2005 Compact Edition provider doesn€™t appear in the list. I installed the SQL Server 2005 Compact Edition from this page http://www.microsoft.com/downloads/details.aspx?FamilyId=%2085E0C3CE-3FA1-453A-8CE9-AF6CA20946C3&displaylang=en. In the additional information says by installing SQLServerCE31-EN.msi installs the provider (System.Data.SqlServerCe.dll) in the GAC (global assembly cache) and registers the OLEDB provider (sqlceoledb30.dll). So, I don€™t understand why couldn€™t I create a new connection with Microsoft SQL Server 2005 Compact Edition from Visual Studio 2005 IDE?
I appreciate your help€¦
If i have been using sql server 2005 express for developing my application and i decide to upgrade to sql server 2005 express with advanced services while still working on the same application, what will happen to my application's database. Can i be able to continue with my work with out any major regrets.
View 1 Replies View RelatedI am looking for a reporting software to create reports (Invoices, Receipts) for PocketPC 2003 using Visual Studio 2005 and SQL Server 2005 Mobile Edition.
Any recommendations will be appreciated.
Thanks, Alla
OK I think I am missing something here. I have installed the newly released SQL Compact Edition, Server Tools, and Tools for VS SP1. According to the documentation you can do the following to create a SQL Compact Edition DB:
Creating a SQL Server Compact Edition database on the server
In SQL Server Management Studio, open Object Explorer.
In Object Explorer, click Connect, and then choose SQL Server Compact Edition.
In the Connect to Server dialog box, select <New Database€¦> from the Database file drop-down list.
In the Create New SQL Server Compact Edition Database dialog box, type a file path and file name for the new database file. You can optionally select the default sort order and choose whether you want to encrypt or password-protect the database. If you choose to encrypt or password-protect the database, type a password, and then click OK.
Click Connect to connect to the new SQL Server Compact Edition database. The database is now displayed in Object Explorer.
I see no reference to or any option to create or connect to a SQL Server Compact Edition database in SQL Mgmt Studio. I had SQL 2005 Mobile installed previously and this still shows as an option. What I am missing here? Is SQL Mobile now SQL Compact Editon?
Thanks in advance,
Jack
Hello Everybody
I want to create SQL server 2005 mobile database on desktop programmatically with some inital data for my application and load it into device. We can create database only in VS2005 server explorer or SQL server 2005 application.
Anybody having this solution for this prob.
Regards
Chikuu
Hello,
I am trying to "import" a .dbf into SQL Server Compact Edition, but I cannot find a way to do so. Can someone tell me how this is done?
Hi,
I'm getting an error while trying to install SQL Server Express 2005 Express Edition. I'm attaching the log of the installation process here. Please throw some light on the same.
Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (3) The system cannot find the path specified.
.
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='203'>
Doing Action: Do_sqlShutDownRANUInstance
PerfTime Start: Do_sqlShutDownRANUInstance : Sat Mar 08 21:39:12 2008
<Func Name='Do_sqlShutDownRANUInstance'>
Service SQLEXPRESS with parameters '' is being started at Sat Mar 08 21:39:12 2008
Unable to start service (3)
Error Code: 0x80070003 (3)
Windows Error Text: The system cannot find the path specified.
Source File Name: sqlsetuplibservice.cpp
Compiler Timestamp: Wed Jun 14 16:29:04 2006
Function Name: sqls:ervice:tart
Source Line Number: 316
---- Context -----------------------------------------------
Setting status of unmanaged components and removing unmanaged resources
Error Code: 3
MSI (s) (D0!64) [21:39:17:257]: Product: Microsoft SQL Server 2005 -- Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (3) The system cannot find the path specified.
.
Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (3) The system cannot find the path specified.
.
Hi,
web searches give no end of how extended stored procedures can only be written in C++ ( or maybe vb also) .
And that extended stored procedures should be abandonded in favour of CLR framework procedures.
And how most articles explain how to convert ESPs to CLR procedures!!!!!
But I need to pass a non-discript block of binary data, extract pieces of data identified by its offset into the block, data type inferred by offset; into data to be written to the SQL database. These offsets are determinede by mapping (C UNION) to C typedef structures.
This cannot be done by managed code, therefore cannot be done by C++ CLR.
It is also ill suited for C# .
Sounds like a job for C++ extended stored procedure.
But how does one create and deploy an ESP with Visual Studio 2005? All wizards seem to insist on CLR.
Help!?
Boyd
Hi all,
I have installed SQL server 2005 express edition with SQL server Management studio express (SSMSE).
I have installed also SQLce and I would know how I can manage sql compact edition databases (.ldf) with sql SSMSE, if it is possible!
I would be grateful if you could explain it trought a detailed guide (I am a beginner user of sql server tools) or trought a link to useful sites.
I'm Looking forward for your reply and still trying...
Alessandro
Hi all,
In my office computer network system (LAN), my Windows XP Pro PC has SQL Server Express and VB 2005 Express installed and I was granted to have the Administrator priviledge to access SQL Server Express. I tried to create a SQLCLR project in my terminal PC.
1) I tried to set up a remote connection to SQL Server Express in the following way: SQL Server EXpress => SQL Server Surface Area Configuration. In the Surface Area Configuration for Service and Connection - local, I clicked on Remote Connection of Database Engine, SQLEXPRESS and I had a "dot" on "Local and remote connections" and "Using TCP/IP only". Then I clicked on "Apply" and "OK" buttons. Then I went to restart my database engine in SQL Server Management. When I went to check SQL Server 2005 Surface Area Configuration, I saw the arrow is pointing to "Service", not to "Remote Connections"!!!??? Is it right/normal? Please comment on this matter and tell me how I can have "Remote Connecton" on after I selected it.
2) After I restarted the database engine (I guess!!), I executed the following project code (copied from a book) in my VB 2005 Express:
//////////////--Form9.vb---/////////////////
mports System.Data.SqlClient
Imports System.Data
Public Class Form9
Dim cnn1 As New SqlConnection
Private Sub Form5_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
'Compute top-level project folder and use it as a prefix for
'the primary data file
Dim int1 As Integer = InStr(My.Application.Info.DirectoryPath, "bin")
Dim strPath As String = Microsoft.VisualBasic.Left(My.Application.Info.DirectoryPath, int1 - 1)
Dim pdbfph As String = strPath & "northwnd.mdf"
Dim cst As String = "Data Source=.sqlexpress;" & _
"Integrated Security=SSPI;" & _
"AttachDBFileName=" & pdbfph
cnn1.ConnectionString = cst
End Sub
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
'Create a command to create a table
Dim cmd1 As New SqlCommand
cmd1.CommandText = "CREATE TABLE FromExcel (" & _
"FirstName nvarchar(15), " & _
"LastName nvarchar(20), " & _
"PersonID int Not Null)"
cmd1.Connection = cnn1
'Invoke the command
Try
cnn1.Open()
cmd1.ExecuteNonQuery()
MessageBox.Show("Command succeeded.", "Outcome", _
MessageBoxButtons.OK, MessageBoxIcon.Information)
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
End Sub
Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
'Create a command to drop a table
Dim cmd1 As New SqlCommand
cmd1.CommandText = "DROP TABLE FromExcel"
cmd1.Connection = cnn1
'Invoke the command
Try
cnn1.Open()
cmd1.ExecuteNonQuery()
MessageBox.Show("Command succeeded.", "Outcome", _
MessageBoxButtons.OK, MessageBoxIcon.Information)
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
End Sub
Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click
'Declare FromExcel Data Table and RowForExcel DataRow
Dim FromExcel As New DataTable
Dim RowForExcel As DataRow
FromExcel.Columns.Add("FirstName", GetType(SqlTypes.SqlString))
FromExcel.Columns.Add("LastName", GetType(SqlTypes.SqlString))
FromExcel.Columns.Add("PersonID", GetType(SqlTypes.SqlInt32))
'Create TextFieldParser for CSV file from spreadsheet
Dim crd1 As Microsoft.VisualBasic.FileIO.TextFieldParser
Dim strPath As String = _
Microsoft.VisualBasic.Left( _
My.Application.Info.DirectoryPath, _
InStr(My.Application.Info.DirectoryPath, "bin") - 1)
crd1 = My.Computer.FileSystem.OpenTextFieldParser _
(My.Computer.FileSystem.CombinePath(strPath, "Book1.csv"))
crd1.TextFieldType = Microsoft.VisualBasic.FileIO.FieldType.Delimited
crd1.Delimiters = New String() {","}
'Loop through rows of CSV file and populate
'RowForExcel DataRow for adding to FromExcel
'Rows collection
Dim currentRow As String()
Do Until crd1.EndOfData
Try
currentRow = crd1.ReadFields()
Dim currentField As String
Dim int1 As Integer = 1
RowForExcel = FromExcel.NewRow
For Each currentField In currentRow
Select Case int1
Case 1
RowForExcel("FirstName") = currentField
Case 2
RowForExcel("LastName") = currentField
Case 3
RowForExcel("PersonID") = CInt(currentField)
End Select
int1 += 1
Next
int1 = 1
FromExcel.Rows.Add(RowForExcel)
RowForExcel = FromExcel.NewRow
Catch ex As Microsoft.VisualBasic.FileIO.MalformedLineException
MsgBox("Line " & ex.Message & _
"is not valid and will be skipped.")
End Try
Loop
'Invoke the WriteToServer method fo the sqc1 SqlBulkCopy
'object to populate FromExcel table in the database with
'the FromExcel DataTable in the project
Try
cnn1.Open()
Using sqc1 As SqlBulkCopy = New SqlBulkCopy(cnn1)
sqc1.DestinationTableName = "dbo.FromExcel"
sqc1.WriteToServer(FromExcel)
End Using
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
'Read the FromExcel table and display results in
'a message box
Dim strQuery As String = "SELECT * " & _
"FROM dbo.FromExcel "
Dim str1 As String = ""
Dim cmd1 As New SqlCommand(strQuery, cnn1)
cnn1.Open()
Dim rdr1 As SqlDataReader
rdr1 = cmd1.ExecuteReader()
Try
While rdr1.Read()
str1 += rdr1.GetString(0) & ", " & _
rdr1.GetString(1) & ", " & _
rdr1.GetSqlInt32(2).ToString & ControlChars.CrLf
End While
Finally
rdr1.Close()
cnn1.Close()
End Try
MessageBox.Show(str1, "FromExcel")
End Sub
End Class
//////////////////////////////////////////////////////////////////////////////
I got the following error messages:
SecurityException was unhandled
Request for the permission of type 'System. Security. Permissions.FileIOPermission,mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'failed that is pointing to the code statement "Dim int1 As Integer = InStr (My.Application.Info.DirectoryPath, "bin")."
Troubleshooting tips:
Store application data in isolated storage.
When deploying an Office solution, check to make sure you have fulfilled all necessary requirments.
Use a certificate to obtain the required permission(s).
If an assembly implementing the custom security references other assemblies, add the referenced assemblies to the full trust assembly list.
Get general help for the exception.
I am a new Microsoft VS.NET Express user to do the SQL Server 2005 Express and VB 2005 Express programming by using the example of a tutorial book. Please help and tell me what is wrong in my SQLCLR sep-up and project coding and how to correct the problems.
Many Thanks in advance,
Scott Chang
(1) I have already installed of SQL Server 2005 Developer Edition first.
(1) Can I install visual studio 2008 without the 2005 express edition of SQL server? Will be any problems because I don't have express edition of SQL server? Do I need to install the express edition of SQL server as well?
(3) How to use SQL Server 2005 Developer Edition instance on visual studio 2008?
Hi there,
Anyone know how I can replace (or download) the sqlexpr32.exe bootstrap package with the advanced services SP2 edition of SQL 2005 express ?
Pieter
I had SQL Server Express Edition installed. I then uninstalled both it and Visual C#. I then installed SQL Server 2005 Developer's Edition and reinstalled Visual C# -- both on the same machine. I can connect to SQL Server 2005 using SQL Server Management Studio. However, Visual C# is a different story. When I try to add a new Data Connection, it defaults the data source to .SQLEXPRESS, which is no longer on my machine. I can select .MSSQLSERVER, but when I click on either OK or Test Connection, I time out with an error message -- error 25 - Connection string is not valid. The connection string that is shown at the bottom of the Advanced dialog box is -- Data Source=.MSSQLSERVER;AttachDbFilename=E:InventoryDataInventory_Data.MDF;Integrated Security=True;Connect Timeout=30;User Instance=True
View 12 Replies View RelatedHI, My computer keeps trying to download SQL Server 2005 Express Edition SP2 and fails with the error code 0x2B22. It is a new computer running with Windows XP Pro.
I have spent hours searching the forums and the internet, but I can't find anything to help, or I don't understand the solutions or whether they relate to my computer. I don't know how to find out why the update is failing either.
Please can someone help!!
Thank you!
if i upgrade from sql server 2005 expressto sql server 2005 enterprise can i do it ?
am i need to uninstall 2005 express before ?
Hello
I am a newbie to this list and hope this gets posted. Sent one out yesterday which never saw the light of day!
In my installation here, I have the security database ASPNETDB.mdb and to keep things independent and robust, I created another database MYDATADB.mdb.
Now, I have a requirement to maintain a custom USERS table in MYDATADB. To meet this requirement, I tried creating an ON INSERT trigger on the ASPNET_USERS table.
However, when I say 'INSERT INTO MYDATADB.dbo.USERS ......', within the trigger body, I get an error saying 'Invalid object'. It seems that MYDATADB is not visible from ASPNETDB. Could there be any other reason for this error?
Are these two databases similar to separate servers? Do I have to create a server group or something -- or a data link of some sort? Please advise and thanks!
Fouwaaz
I am building an application using sql server express. The .mdf file is located in my appdata directory and connection string is stored in the web.config. Here is an the connection string
<add name="blogConnectionString" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|log.mdf;Integrated Security=True;User Instance=True"
providerName="System.Data.SqlClient" />
The application runs great locally on my personal computer debugging with Visual Studio 2005 but when i put it on our dev server i get the following error. I would use full blown Sql 2005 but our client doesnt have it. I thought if you had sql 2005 installed on the server you didnt have to install the express edition. Any insight?
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Is SQL Server 2005 Express Edition, compatable with Visual Basic 2008 Express Edition ?
View 1 Replies View Relatedhi
Currently have SQL Server 2005 Express Edition installed. Wanted to install reporting services, but wouldn't let me re no IIS as I only have Windows XP Home Edition.
My question is therefore: Is there any way of installing IIS to allow me to install Reporting Services for SQL Server 2005 Express Edition
Many thanks
Tim
Leicester, UK
I am trying to install SQL Server 2005 Express Edition onto my PC on the D: drive, it seems it wants to connect to the C:Program FilesMicrosoft SQL Server directory but I want to change it to D:Program FilesMicrosoft SQL Server
I change the template.ini file in the source folder to reflect the following (I tried both with and without quotes)
INSTALLSQLDIR="D:Program FilesMicrosoft SQL Server"
When I run setup it still gives me the error on the C: drive, can someone please show me how to point this setup.exe file to install on the D: drive.
Thanks.
Hi
I have installed SQL Server 2005 Ex.Ed. sp1. To upgrade to SP2, I have first to uninstall my SQL Server and then reinstall???
Isn't there a patch for SP2, that I don't have to uninstall?
If I try to install "SQLEXPR32_DEU.EXE" anyway, I receive the following message:
TITEL: Microsoft SQL Server-Setup
------------------------------
Keines der ausgewählten Features kann installiert oder aktualisiert werden. Das Setup kann nicht fortgesetzt werden, da am Computer keine effektiven Änderungen vorgenommen werden. Um den Vorgang fortzusetzen, klicken Sie auf 'Zurück', und wählen Sie dann zu installierende Features aus. Klicken Sie auf 'Abbrechen', um das SQL Server-Setup zu beenden.
Hilfe erhalten Sie durch Klicken auf: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=setup.rll&EvtID=SQLSetup90&EvtType=28108
Translation:
No selected features could be installed or updated. Setup can't be continued, because no effective changes on computer can't be made. To continue the process click 'back'....
Thanks for any help in advance.
Mike
This is a question about the movie collection starter So here it is:
I am running Vista RC1 (Build 5600) and vb express 2005
I downloaded and install SQL Server Express 2005 Edition SP2 - Since SQL Server Express 2005 Edition SP1 does not work with Vista
But when I try to run the collection app or if I try to download and install the Amazon version I get the following error message:
There was a problem loading data: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be cause by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
I need any advice you can give me to solve this problem, how to change the default settings, because I do not know where to start.
Thanks
I have Visual Web Developer 2005 Express edition and I wanted to install SQL Server 2005 Express edition.From this page, I have downloaded and installed 'Microsoft SQL
Server 2005 Express Edition' and 'Microsoft SQL
Server 2005 Express Edition with Advanced Services http://msdn.microsoft.com/vstudio/express/sql/download/After the installation, how should I access the SQL Server 2005 Express edition?Because the only thing listed in 'Start > All Programs > SQL Server 2005' is 'Configuration Tools'I was hoping that when I install SQL Server 2005 express edition, I would get all the menu that I get by installing SQL Server 2000.So after installing SQL Server 2005 Express edition, what should I be expection? Thanks