Hi friends,
I'd like to know if there's any way I can make a package that runs a script in SQL 2005 Standard Edition?
I'm also wondering if there's a way to write a script to access database to a different server.. specifically SQL 2005 Standard.
I appreciate all of your answers.
thanks
Mike
Hi All,
I am in the process of moving from a 32-bit SQL Server 2005 Enterprise (9.0.3054) to a 64-bit SQL Server 2005 Enterprise (9.0.3054 with 4 CPUs and 8GB of memory on Win 2003 SP2) and the process has been very frustrating to say the least. I am having a problem with packages that I created on my 64-bit SQL Server. I am importing a few tables from the 32-SQL Server into the 64-bit SQL Server using the Task --> Import to create the package.
Sometimes when I am creating a package I get the following error in a message box:
SQL Server Import and Export Wizard
The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered. The wizard cannot continue and it will terminate.
Additional information: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (System.Windows.Forms)
Other times when I run a package that has run successfully before I get the following error:
Faulting application dtexecui.exe, version 9.0.3042.0, stamp 45cd726d, faulting module unknown, version 0.0.0.0, stamp 00000000, debug? 0, fault address 0x025d23f0.
Other times I get this error message:
.NET Runtime version 2.0.50727.1433 - Fatal Execution Engine Error (79FFEE24) (80131506)
And still other times
The package appears to hang when running. By this I mean that the Package Execution Progress shows progress up to a point then it just stops. (The package takes about 17 seconds to run normally) CPU usage is at 1% and the package cannot be stopped.
I have deleted and re-created the package several times and I have also re-installed the service pack on the SQL Server (9.0.3054) but that did not help.
Does anyone have any other suggestions to try?
Thanks.
Hi,
I am new to SSIS. I followed the direction of the tutorial Creating Simple ETL Tutorial package in BooksOnline. I have tried more than five times and have done exactly as suggested in the tutorial but it does not work.
The URL is:
http://msdn2.microsoft.com/en-us/library/ms169917.aspx
I get these warnings and finally fails:
1)[Lookup [30]] Error: Row yielded no match during lookup.
2) [Lookup [30]] Error: The "component "Lookup" (30)" failed because error code 0xC020901E occurred, and the error row disposition on "output "Lookup Output" (32)" specifies failure on error. An error occurred on the specified object of the specified component.
3) [DTS.Pipeline] Error: The ProcessInput method on component "Lookup" (30) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
4) [DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0209029.
Can someone help me with this tutorial error? or Am I doing something wrong.
Thank you,
I had just installed SQL 2005 dev on my laptop and got an error message when I tried to create a package using the BI IDE. I received the same error using VS2005 IDE. But the project was created regardless without any packages. When I tried to create a new package in the project, I received the same error again, but with an option to view the error details.
Following is the text of the error details:
TITLE: Microsoft Visual Studio
------------------------------
Error creating package
------------------------------
ADDITIONAL INFORMATION:
Failed to save package file "C:Documents and SettingsmyoungbloodLocal SettingsTemp mpD4B.tmp" with error 0x80040154 "Class not registered".
------------------------------
Failed to save package file "C:Documents and SettingsmyoungbloodLocal SettingsTemp mpD4B.tmp" with error 0x80040154 "Class not registered".
------------------------------
BUTTONS:
OK
------------------------------
I found a similar post that suggested that they try the following:
regsvr32 msxml3.dll
regsvr32 msxml4.dll
regsvr32 msxml6.dll
But msxml6.dll could not be found.
I did get a copy of this file from a coworker, and after copying it and registering it, I was able to add a package to the project.
My concern now is what is the likelyhood of this being the only file missing from the installation.
I'm wondering if I should reinstall, or (if it exists) do a repair on the installation.
Thanks.
Marshall
Hi all,
I want to import a text file into SQL DB by programmatically creating the DTS Package in SQL 7.0 Using Visual Basic 6.0.
I need some good example regarding above subject.
Please Help!
Ajay
I have a small question relating to the creation of DTS Packages. I have to create a DTS Package with the following conditions -
- The accounting department gets a text file every month, they also want the same text file in Excel format. Which they will send it to a third party.
- I want to be able to create a scheduled report based upon this information.
- Also setting a schedule on the day when this will take place.
I know how to create a DTS Package, however I am a little new. So any help will be greatly appreciated. Let me know if you need more info.
Nishi
I've created a DTS package and now I need to distribute it todifferent servers.I've been looking for a way to automatically/programatically create aDTS package, but have not found anything definite.From the DTS package itself, I see where I can save the dts package asa structured file, with the name XXXXX.dts. Once I have that DTSfile, how dow I turn it back into a dts package in Enterprise manager?I don't want to have to manually create the package for 300+servers...Thanks,Jennifer
View 1 Replies View RelatedHi
I have a Win2K SP1 server running SQL 7. Whenever I try to create a DTS package, I get a box headed "DTS CoCreateInstance" with "Error in the DLL" as the box text. I have tried removing and re-installing SQL 7 and have also applied SQL SP 1,2 & 3. There are no errors in the event log, just the popup error outlined above.
Has anyone seen this error, and is there a fix?
Thanks
Simon Thomas
CommArc Consulting Ltd
Hi,
Is there a SQL call or some other way "scripted" way to create a database in SQL 7.0? We have an application that runs on a client's local database and we want them to be able to run a package that creates the database (as opposed to an administrator logging onto their database and doing it manually through the wizard). There are commands to detach and attach databases(i.e. move them) but not to create them.
Thanks in advance...
Ryan
I'm totally new to SQL Server, so any help would be appreciated. I want to create a DTS Package, but I'm not really sure where to start. I've read a few tutorials online, but the "New project" menu of the Evaluation Version of SQL Server 2005 does not look the same as the tutorials, and does not include "DTS"
Should I try SQL Server 2000 instead, or am I just missing something in 2005?
Hi,I want to create a DTS package programatically (preferably inC#.net),which will copy all my tables from a oracle database to mysql-server database.Can anybody help me doing this???ThanksPatnayak
View 2 Replies View RelatedHI All,
can any body give steps to import data from one sqldb to another through ssis package, i was comfotable with dts but ssis is a lil bit confusing.....
thnx
regards
Can anyone give a newbie a general script for creating an SSIS page to import data nightly from an Access database to sql 2005. They are not on the same server. The Access database us 366,968 kb and grows everyday from input from web content. It has 5 tables and 100's of queries, which is how it is updated.
Please give me a starting point, do not understand the info in books on line.
Thank you
Dee
Hi,
I have a created a DTS packges which is reading data from sql server table, manipulate this data as required and then create a text file with that data. I created the text file using FileSystemObject. I was writing one field at a time to the text file.
I need to same thing but instead of creating text file, I need to create a excel file with each column from database going to separate column in excel sheet. I tried to do this with FileSystemObject, but it was wrting all the columns from database to one cell in excel sheet. How can I fix this problem?
Thanks!
Following is what I would like to do, so I can keep updating my central SQL Server database with latest updates from the field. I like to use SSIS 2005 to create a package that could do this. Any help to get me started would be appreciated. I need some help soon, pls give me something to get started. APpreciate it. Thanks.
Open connection and read client location table on the local SQL Server database called PODO
For each location id in the table do the following:
Store locationid/clientid in a variable called CLLOC_ID
Construct file name with mdb extension and store in a variable MDB_FILE
Establish connection to the data import folder
Search for that MDB_FILE in the folder on the file system
If there is a file where match = true then do this:
1) Open the access database
2) Read and import the data from the customer experience table
3) Write that data to the SQL Server tables where location = CLLOC_ID
4) Exit process
IF there is no match, exit process
Keep looping until all the client ids/loc ids are read from the SQL Server client location table.
MA
Hi guys,
I was intended to write a program that will create a SSIS package which will import data from a CSV file to the SQL server 2005. But I did not find any good example for this into the internet. I found some example which exports data from SQL server 2005 to CSV files. And following those examples I have tried to write my own. But I am facing some problem with that. What I am doing here is creating two connection manager objects, one for Flat file and another for OLEDB. And create a data flow task that has two data flow component, one for reading source and another for writing to destination. While debugging I can see that after invoking the ReinitializedMetaData() for the flat file source data flow component, there is not output column found. Why it is not fetching the output columns from the CSV file? And after that when it invokes the ReinitializedMetaData() for the destination data flow component it simply throws exception.
Can any body help me to get around this problem? Even can anyone give me any link where I can find some useful article to accomplish this goal?
I am giving my code here too.
I will appreciate any kind of suggestion on this.
Code snippet:
public void CreatePackage()
{
string executeSqlTask = typeof(ExecuteSQLTask).AssemblyQualifiedName;
Package pkg = new Package();
pkg.PackageType = DTSPackageType.DTSDesigner90;
ConnectionManager oledbConnectionManager = CreateOLEDBConnection(pkg);
ConnectionManager flatfileConnectionManager =
CreateFileConnection(pkg);
// creating the SQL Task for table creation
Executable sqlTaskExecutable = pkg.Executables.Add(executeSqlTask);
ExecuteSQLTask execSqlTask = (sqlTaskExecutable as Microsoft.SqlServer.Dts.Runtime.TaskHost).InnerObject as ExecuteSQLTask;
execSqlTask.Connection = oledbConnectionManager.Name;
execSqlTask.SqlStatementSource =
"CREATE TABLE [MYDATABASE].[dbo].[MYTABLE] ([NAME] NVARCHAR(50),[AGE] NVARCHAR(50),[GENDER] NVARCHAR(50)) GO";
// creating the Data flow task
Executable dataFlowExecutable = pkg.Executables.Add("DTS.Pipeline.1");
TaskHost pipeLineTaskHost = (TaskHost)dataFlowExecutable;
MainPipe dataFlowTask = (MainPipe)pipeLineTaskHost.InnerObject;
// Put a precedence constraint between the tasks.
PrecedenceConstraint pcTasks = pkg.PrecedenceConstraints.Add(sqlTaskExecutable, dataFlowExecutable);
pcTasks.Value = DTSExecResult.Success;
pcTasks.EvalOp = DTSPrecedenceEvalOp.Constraint;
// Now adding the data flow components
IDTSComponentMetaData90 sourceDataFlowComponent = dataFlowTask.ComponentMetaDataCollection.New();
sourceDataFlowComponent.Name = "Source Data from Flat file";
// Here is the component class id for flat file source data
sourceDataFlowComponent.ComponentClassID = "{90C7770B-DE7C-435E-880E-E718C92C0573}";
CManagedComponentWrapper managedInstance = sourceDataFlowComponent.Instantiate();
managedInstance.ProvideComponentProperties();
sourceDataFlowComponent.
RuntimeConnectionCollection[0].ConnectionManagerID = flatfileConnectionManager.ID;
sourceDataFlowComponent.
RuntimeConnectionCollection[0].ConnectionManager = DtsConvert.ToConnectionManager90(flatfileConnectionManager);
managedInstance.AcquireConnections(null);
managedInstance.ReinitializeMetaData();
managedInstance.ReleaseConnections();
// Get the destination's default input and virtual input.
IDTSOutput90 output = sourceDataFlowComponent.OutputCollection[0];
// Here I dont find any columns at all..why??
// Now adding the data flow components
IDTSComponentMetaData90 destinationDataFlowComponent = dataFlowTask.ComponentMetaDataCollection.New();
destinationDataFlowComponent.Name =
"Destination Oledb compoenent";
// Here is the component class id for Oledvb data
destinationDataFlowComponent.ComponentClassID = "{E2568105-9550-4F71-A638-B7FE42E66922}";
CManagedComponentWrapper managedOleInstance = destinationDataFlowComponent.Instantiate();
managedOleInstance.ProvideComponentProperties();
destinationDataFlowComponent.
RuntimeConnectionCollection[0].ConnectionManagerID = oledbConnectionManager.ID;
destinationDataFlowComponent.
RuntimeConnectionCollection[0].ConnectionManager = DtsConvert.ToConnectionManager90(oledbConnectionManager);
// Set the custom properties.
managedOleInstance.SetComponentProperty("AccessMode", 2);
managedOleInstance.SetComponentProperty("OpenRowset", "[MYDATABASE].[dbo].[MYTABLE]");
managedOleInstance.AcquireConnections(null);
managedOleInstance.ReinitializeMetaData(); // Throws exception
managedOleInstance.ReleaseConnections();
// Create the path.
IDTSPath90 path = dataFlowTask.PathCollection.New(); path.AttachPathAndPropagateNotifications(sourceDataFlowComponent.OutputCollection[0],
destinationDataFlowComponent.InputCollection[0]);
// Get the destination's default input and virtual input.
IDTSInput90 input = destinationDataFlowComponent.InputCollection[0];
IDTSVirtualInput90 vInput = input.GetVirtualInput();
// Iterate through the virtual input column collection.
foreach (IDTSVirtualInputColumn90 vColumn in vInput.VirtualInputColumnCollection)
{
managedOleInstance.SetUsageType(
input.ID, vInput, vColumn.LineageID, DTSUsageType.UT_READONLY);
}
DTSExecResult res = pkg.Execute();
}
public ConnectionManager CreateOLEDBConnection(Package p)
{
ConnectionManager ConMgr;
ConMgr = p.Connections.Add("OLEDB");
ConMgr.ConnectionString =
"Data Source=VSTS;Initial Catalog=MYDATABASE;Provider=SQLNCLI;Integrated Security=SSPI;Auto Translate=false;";
ConMgr.Name = "SSIS Connection Manager for Oledb";
ConMgr.Description = "OLE DB connection to the Test database.";
return ConMgr;
}
public ConnectionManager CreateFileConnection(Package p)
{
ConnectionManager connMgr;
connMgr = p.Connections.Add("FLATFILE");
connMgr.ConnectionString = @"D:MyCSVFile.csv";
connMgr.Name = "SSIS Connection Manager for Files";
connMgr.Description = "Flat File connection";
connMgr.Properties["Format"].SetValue(connMgr, "Delimited");
connMgr.Properties["HeaderRowDelimiter"].SetValue(connMgr, Environment.NewLine);
return connMgr;
}
And my CSV files is as follows
NAME, AGE, GENDER
Jon,52,MALE
Linda, 26, FEMALE
Thats all. Thanks.
Hi,
I'm trying to create a SSIS package. I have used OLEDBSource adapter to get the source table's data and transferring the data to an OLEDBDestination adapter. I tried but I'm facing the problem in mapping the metadata contents.
My code:
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
static void Main(string[] args)
{
// Create a new package
Package package = new Package();
package.Name = "OLE DB Transfer";
// Add a Data Flow task
TaskHost taskHost = package.Executables.Add("DTS.Pipeline") as TaskHost;
taskHost.Name = "Transfer Table";
IDTSPipeline90 pipeline = taskHost.InnerObject as MainPipe;
// Get the pipeline's component metadata collection
IDTSComponentMetaDataCollection90 componentMetadataCollection = pipeline.ComponentMetaDataCollection;
// Add a new component metadata object to the data flow
IDTSComponentMetaData90 oledbSourceMetadata = componentMetadataCollection.New();
// Associate the component metadata object with the OLE DB Source Adapter
oledbSourceMetadata.ComponentClassID = "DTSAdapter.OLEDBSource";
// Instantiate the OLE DB Source adapter
IDTSDesigntimeComponent90 oledbSourceComponent = oledbSourceMetadata.Instantiate();
// Ask the component to set up its component metadata object
oledbSourceComponent.ProvideComponentProperties();
// Add an OLE DB connection manager
ConnectionManager connectionManagerSource = package.Connections.Add("OLEDB");
connectionManagerSource.Name = "OLEDBSource";
// Set the connection string
connectionManagerSource.ConnectionString = "provider=sqlncli;server=HSCHBSCGN25008;integrated security=sspi;database=Muthu_SSIS_Testing";
// Set the connection manager as the OLE DB Source adapter's runtime connection
IDTSRuntimeConnection90 runtimeConnectionSource = oledbSourceMetadata.RuntimeConnectionCollection["OleDbConnection"];
runtimeConnectionSource.ConnectionManagerID = connectionManagerSource.ID;
// Tell the OLE DB Source adapter to use the SQL Command access mode.
oledbSourceComponent.SetComponentProperty("AccessMode", 2);
// Set up the SQL command
oledbSourceComponent.SetComponentProperty("SqlCommand", "select * from EmployeeTable");
// Set up the connection manager object
runtimeConnectionSource.ConnectionManager = DtsConvert.ToConnectionManager90(connectionManagerSource);
// Establish the database connection
oledbSourceComponent.AcquireConnections(null);
// Set up the column metadata
oledbSourceComponent.ReinitializeMetaData();
// Release the database connection
oledbSourceComponent.ReleaseConnections();
// Release the connection manager
runtimeConnectionSource.ReleaseConnectionManager();
// Add a new component metadata object to the data flow
IDTSComponentMetaData90 oledbDestinationMetadata = componentMetadataCollection.New();
//Associate the component metadata object with the OLE DB Destination Adapter
oledbDestinationMetadata.ComponentClassID = "DTSAdapter.OLEDBDestination";
// Instantiate the OLE DB Destination adapter
IDTSDesigntimeComponent90 oledbDestinationComponent = oledbDestinationMetadata.Instantiate();
// Ask the component to set up its component metadata object
oledbDestinationComponent.ProvideComponentProperties();
// Add an OLE DB connection manager
ConnectionManager connectionManagerDestination = package.Connections.Add("OLEDB");
connectionManagerDestination.Name = "OLEDBDestination";
// Set the connection string
connectionManagerDestination.ConnectionString = "provider=sqlncli;server=HSCHBSCGN25008;integrated security=sspi;database=Muthu_SSIS_Testing";
// Set the connection manager as the OLE DB Destination adapter's runtime connection
IDTSRuntimeConnection90 runtimeConnectionDestination = oledbDestinationMetadata.RuntimeConnectionCollection["OleDbConnection"];
runtimeConnectionDestination.ConnectionManagerID = connectionManagerDestination.ID;
// Tell the OLE DB Destination adapter to use the SQL Command access mode.
oledbDestinationComponent.SetComponentProperty("AccessMode", 2);
// Set up the SQL command
oledbDestinationComponent.SetComponentProperty("SqlCommand", "select from EmplTable");
// Set up the connection manager object
runtimeConnectionDestination.ConnectionManager = DtsConvert.ToConnectionManager90(connectionManagerDestination);
// Get the standard output of the OLE DB Source adapter
IDTSOutput90 oledbSourceOutput = oledbSourceMetadata.OutputCollection["OLE DB Source Output"];
// Get the input of the OLE DB Destination adapter
IDTSInput90 oledbDestinationInput = oledbDestinationMetadata.InputCollection["OLE DB Destination Input"];
// Create a new path object
IDTSPath90 path = pipeline.PathCollection.New();
// Connect the source and destination adapters
path.AttachPathAndPropagateNotifications(oledbSourceOutput, oledbDestinationInput);
IDTSInput90 input = oledbDestinationInput;
IDTSVirtualInput90 vInput = input.GetVirtualInput();
foreach (IDTSVirtualInputColumn90 vColumn in vInput.VirtualInputColumnCollection)
{
// Call the SetUsageType method of the destination
// to add each available virtual input column as an input column.
oledbDestinationComponent.SetUsageType(
input.ID, vInput, vColumn.LineageID, DTSUsageType.UT_READONLY);
}
foreach (IDTSInputColumn90 col in oledbDestinationInput.InputColumnCollection)
{
IDTSExternalMetadataColumn90 exCol = oledbDestinationInput.ExternalMetadataColumnCollection[col.Name];
oledbDestinationComponent.MapInputColumn(oledbDestinationInput.ID, col.ID, exCol.ID);
}
Console.WriteLine("done");
Console.ReadKey();
// Save the package
//Application application = new Application();
//application.SaveToXml(@"c:OLEDBTransfer.dtsx", package, null);
}
While debugging, I'm getting exception (ELEMENTNOTFOUND) at this line
IDTSExternalMetadataColumn90 exCol = oledbDestinationInput.ExternalMetadataColumnCollection[col.Name];
because metadata have no appropriate column to map with the destination component.
Any one help me to resolve this issue.
Regards,
kris
hi !
I am creating a directory folder inside the package. At first attempt while running the package it creates without any errors but when i run it second time it throws up warning message : Directory already exists. but the package succeeds.
When i try running it from another server through command line it fails. saying that Device it not Ready.
What is the proble here !!!!!!! Any help please
Jas
Hi
I am trying to build a package that is comprised of 100+ dtsx packages but cannot seem to get it to work. I have created a new connection where the connectionmanagertype = file and the file path is equal to the folder in which my dtsx files are located. I (location = fileSystem). No matter what I do I get an access denied error that shows the folder location but no package. I manually typed the name of the package in the PackageName property and have pasted in the PackageID in the appropriate property as well but I don't see anything in the PackageNameReadOnly. I have read the MSDN information but I don't see a step by step way to build a package of packages against which I can compare. Can anyone set me straight?
Thanks.
Robin
I have a ssis package in the DW environment. How can I run this package in the production environment by creating the job and run remotely.
View 7 Replies View RelatedI'm very new to ssis, so I hope I don't sound too ignorant. I was told there might be a way to create User interfaces for ssis projects. ie, I am trying to create an import package that will let a user import an excel file to a sql table. What I would like to have is some sort of web interface that lets the user select the source file and destination table.
The more I search for a way to do this the more it seems impossible without knowing a ton about coding. If anyoen can help I'd appreciate it.
I would like to create an event handler that would catch any errors that result from a sys.<table> not existing. The package is designed to run on both SQL Server 2000 and SQL Server 2005 and when I query sys.<tables> there is an error when the query is run on SQL Server 2000. I just need a good starting point...I would like something that when the server isn't 2005 it just skips the server and doesn't fail the package and doesn't get counted towards the max error count. Thanks for any help.
-Kyle
Below is C# code used to create a FuzzyLookup SSIS package programmatically. It does 95% of what I need it to. The only thing missing that I cannot figure out is how to take a Fuzzy Lookup Input column (OLE DB Output Column) and make it "pass through" the fuzzy lookup component to the OLE DB Destination. In the example below, that means I need the QuarantinedEmployeeId to make it into the destination.
Look in the "Test Dependencies" region below to get instructions and scripts used to set assembly references, create the sample tables used for this example, and insert test data.
Can anyone help me get past this last hurdle? You will see at the end of my Fuzzy Lookup region a bunch of commented out code that I've used to try to accomplish this last problem.
Code Block
using Microsoft.SqlServer.Dts.Runtime;
using Microsoft.SqlServer.Dts.Pipeline.Wrapper;
namespace CreateSsisPackage
{
public class TestFuzzyLookup
{
public static void Test()
{
#region Test Dependencies
// Assembly references:
// Microsoft.SqlServer.DTSPipelineWrap
// Microsoft.SQLServer.DTSRuntimeWrap
// Microsoft.SQLServer.ManagedDTS
// First create a database called TestFuzzyLookup
// Next, create tables:
//SET ANSI_NULLS ON
//GO
//SET QUOTED_IDENTIFIER ON
//GO
//CREATE TABLE [dbo].[EmployeeMatch](
// [RecordId] [int] IDENTITY(1,1) NOT NULL,
// [EmployeeId] [int] NOT NULL,
// [QuarantinedEmployeeId] [int] NOT NULL,
// [_Similarity] [real] NOT NULL,
// [_Confidence] [real] NOT NULL,
// CONSTRAINT [PK_EmployeeMatch] PRIMARY KEY CLUSTERED
//(
// [RecordId] ASC
//)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]
//) ON [PRIMARY]
//GO
//SET ANSI_NULLS ON
//GO
//SET QUOTED_IDENTIFIER ON
//GO
//CREATE TABLE [dbo].[QuarantinedEmployee](
// [QuarantinedEmployeeId] [int] IDENTITY(1,1) NOT NULL,
// [QuarantinedEmployeeName] [varchar](50) NOT NULL,
// CONSTRAINT [PK_QuarantinedEmployee] PRIMARY KEY CLUSTERED
//(
// [QuarantinedEmployeeId] ASC
//)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]
//) ON [PRIMARY]
//GO
//SET ANSI_NULLS ON
//GO
//SET QUOTED_IDENTIFIER ON
//GO
//CREATE TABLE [dbo].[Employee](
// [EmployeeId] [int] IDENTITY(1,1) NOT NULL,
// [EmployeeName] [varchar](50) NOT NULL,
// CONSTRAINT [PK_Employee] PRIMARY KEY CLUSTERED
//(
// [EmployeeId] ASC
//)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]
//) ON [PRIMARY]
// Next, insert test data
//insert into employee values ('John Doe')
//insert into employee values ('Jane Smith')
//insert into employee values ('Ryan Johnson')
//insert into quarantinedemployee values ('John Dole')
#endregion Test Dependencies
#region Create Package
// Create a new package
Package package = new Package();
package.Name = "FuzzyLookupTest";
// Add a Data Flow task
TaskHost taskHost = package.Executables.Add("DTS.Pipeline") as TaskHost;
taskHost.Name = "Fuzzy Lookup";
IDTSPipeline90 pipeline = taskHost.InnerObject as MainPipe;
// Get the pipeline's component metadata collection
IDTSComponentMetaDataCollection90 componentMetadataCollection = pipeline.ComponentMetaDataCollection;
#endregion Create Package
#region Source
// Add a new component metadata object to the data flow
IDTSComponentMetaData90 oledbSourceMetadata = componentMetadataCollection.New();
// Associate the component metadata object with the OLE DB Source Adapter
oledbSourceMetadata.ComponentClassID = "DTSAdapter.OLEDBSource";
// Instantiate the OLE DB Source adapter
IDTSDesigntimeComponent90 oledbSourceComponent = oledbSourceMetadata.Instantiate();
// Ask the component to set up its component metadata object
oledbSourceComponent.ProvideComponentProperties();
// Add an OLE DB connection manager
ConnectionManager connectionManagerSource = package.Connections.Add("OLEDB");
connectionManagerSource.Name = "OLEDBSource";
// Set the connection string
connectionManagerSource.ConnectionString = "Data Source=localhost;Initial Catalog=TestFuzzyLookup;Provider=SQLNCLI.1;Integrated Security=SSPI;Auto Translate=False;";
// Set the connection manager as the OLE DB Source adapter's runtime connection
IDTSRuntimeConnection90 runtimeConnectionSource = oledbSourceMetadata.RuntimeConnectionCollection["OleDbConnection"];
runtimeConnectionSource.ConnectionManagerID = connectionManagerSource.ID;
// Tell the OLE DB Source adapter to use the source table
oledbSourceComponent.SetComponentProperty("OpenRowset", "QuarantinedEmployee");
oledbSourceComponent.SetComponentProperty("AccessMode", 0);
// Set up the connection manager object
runtimeConnectionSource.ConnectionManager = DtsConvert.ToConnectionManager90(connectionManagerSource);
// Establish the database connection
oledbSourceComponent.AcquireConnections(null);
// Set up the column metadata
oledbSourceComponent.ReinitializeMetaData();
// Release the database connection
oledbSourceComponent.ReleaseConnections();
// Release the connection manager
runtimeConnectionSource.ReleaseConnectionManager();
#endregion Source
#region Fuzzy Lookup
// Add a new component metadata object to the data flow
IDTSComponentMetaData90 fuzzyLookupMetadata = componentMetadataCollection.New();
// Associate the component metadata object with the Fuzzy Lookup object
fuzzyLookupMetadata.ComponentClassID = "DTSTransform.BestMatch.1";
// Instantiate
IDTSDesigntimeComponent90 fuzzyLookupComponent = fuzzyLookupMetadata.Instantiate();
// Ask the component to set up its component metadata object
fuzzyLookupComponent.ProvideComponentProperties();
// Add an OLE DB connection manager
ConnectionManager connectionManagerFuzzy = package.Connections.Add("OLEDB");
connectionManagerFuzzy.Name = "OLEDBFuzzy";
// Set the connection string
connectionManagerFuzzy.ConnectionString = "Data Source=localhost;Initial Catalog=TestFuzzyLookup;Provider=SQLNCLI.1;Integrated Security=SSPI;Auto Translate=False;";
// Set the connection manager as the fuzzy lookup component's runtime connection
IDTSRuntimeConnection90 runtimeConnectionFuzzy = fuzzyLookupMetadata.RuntimeConnectionCollection["OleDbConnection"];
runtimeConnectionFuzzy.ConnectionManagerID = connectionManagerFuzzy.ID;
// Set up the connection manager object
runtimeConnectionFuzzy.ConnectionManager = DtsConvert.ToConnectionManager90(connectionManagerFuzzy);
// Establish the database connection
fuzzyLookupComponent.AcquireConnections(null);
// Set up the external metadata column
fuzzyLookupComponent.ReinitializeMetaData();
// Release the database connection
fuzzyLookupComponent.ReleaseConnections();
// Release the connection manager
runtimeConnectionFuzzy.ReleaseConnectionManager();
// Get the standard output of the OLE DB Source adapter
IDTSOutput90 oledbSourceOutput = oledbSourceMetadata.OutputCollection["OLE DB Source Output"];
// Get the input of the Fuzzy Lookup component
IDTSInput90 fuzzyInput = fuzzyLookupMetadata.InputCollection["Fuzzy Lookup Input"];
// Create a new path object
IDTSPath90 path = pipeline.PathCollection.New();
// Connect the source to Fuzzy Lookup
path.AttachPathAndPropagateNotifications(oledbSourceOutput, fuzzyInput);
// Get the output column collection for the OLE DB Source adapter
IDTSOutputColumnCollection90 oledbSourceOutputColumns = oledbSourceOutput.OutputColumnCollection;
// Get the external metadata column collection for the fuzzy lookup component
IDTSExternalMetadataColumnCollection90 externalMetadataColumns = fuzzyInput.ExternalMetadataColumnCollection;
// Get the virtual input for the fuzzy lookup component
IDTSVirtualInput90 virtualInput = fuzzyInput.GetVirtualInput();
// Loop through output columns and relate columns that will be fuzzy matched on
foreach (IDTSOutputColumn90 outputColumn in oledbSourceOutputColumns)
{
IDTSInputColumn90 col = fuzzyLookupComponent.SetUsageType(fuzzyInput.ID, virtualInput, outputColumn.LineageID, DTSUsageType.UT_READONLY);
if (outputColumn.Name == "QuarantinedEmployeeName")
{
// column name is one of the columns we'll match with
fuzzyLookupComponent.SetInputColumnProperty(fuzzyInput.ID, col.ID, "JoinToReferenceColumn", "EmployeeName");
fuzzyLookupComponent.SetInputColumnProperty(fuzzyInput.ID, col.ID, "MinSimilarity", 0.6m);
// set to be fuzzy match (not exact match)
fuzzyLookupComponent.SetInputColumnProperty(fuzzyInput.ID, col.ID, "JoinType", 2);
}
}
fuzzyLookupComponent.SetComponentProperty("MatchIndexOptions", 1);
fuzzyLookupComponent.SetComponentProperty("MaxOutputMatchesPerInput", 100);
fuzzyLookupComponent.SetComponentProperty("ReferenceTableName", "Employee");
fuzzyLookupComponent.SetComponentProperty("WarmCaches", true);
fuzzyLookupComponent.SetComponentProperty("MinSimilarity", 0.6);
IDTSOutput90 fuzzyLookupOutput = fuzzyLookupMetadata.OutputCollection["Fuzzy Lookup Output"];
// add output columns that will simply pass through from the reference table (Employee)
IDTSOutputColumn90 outCol = fuzzyLookupComponent.InsertOutputColumnAt(fuzzyLookupOutput.ID, 0, "EmployeeId", "");
outCol.SetDataTypeProperties(Microsoft.SqlServer.Dts.Runtime.Wrapper.DataType.DT_I4, 0, 0, 0, 0);
fuzzyLookupComponent.SetOutputColumnProperty(fuzzyLookupOutput.ID, outCol.ID, "CopyFromReferenceColumn", "EmployeeId");
// add output columns that will simply pass through from the oledb source (QuarantinedEmployeeId)
//IDTSOutput90 sourceOutputCollection = oledbSourceMetadata.OutputCollection["OLE DB Source Output"];
//IDTSOutputColumnCollection90 sourceOutputCols = sourceOutputCollection.OutputColumnCollection;
//foreach (IDTSOutputColumn90 outputColumn in sourceOutputCols)
//{
// if (outputColumn.Name == "QuarantinedEmployeeId")
// {
// IDTSOutputColumn90 col = fuzzyLookupComponent.InsertOutputColumnAt(fuzzyLookupOutput.ID, 0, outputColumn.Name, "");
// col.SetDataTypeProperties(
// outputColumn.DataType, outputColumn.Length, outputColumn.Precision, outputColumn.Scale, outputColumn.CodePage);
// //fuzzyLookupComponent.SetOutputColumnProperty(
// // fuzzyLookupOutput.ID, col.ID, "SourceInputColumnLineageId", outputColumn.LineageID);
// }
//}
// add output columns that will simply pass through from the oledb source (QuarantinedEmployeeId)
//IDTSInput90 fuzzyInputCollection = fuzzyLookupMetadata.InputCollection["Fuzzy Lookup Input"];
//IDTSInputColumnCollection90 fuzzyInputCols = fuzzyInputCollection.InputColumnCollection;
//foreach (IDTSInputColumn90 inputColumn in fuzzyInputCols)
//{
// if (inputColumn.Name == "QuarantinedEmployeeId")
// {
// IDTSOutputColumn90 col = fuzzyLookupComponent.InsertOutputColumnAt(fuzzyLookupOutput.ID, 0, inputColumn.Name, "");
// col.SetDataTypeProperties(
// inputColumn.DataType, inputColumn.Length, inputColumn.Precision, inputColumn.Scale, inputColumn.CodePage);
// fuzzyLookupComponent.SetOutputColumnProperty(
// fuzzyLookupOutput.ID, col.ID, "SourceInputColumnLineageId", inputColumn.LineageID);
// }
//}
#endregion Fuzzy Lookup
#region Destination
// Add a new component metadata object to the data flow
IDTSComponentMetaData90 oledbDestinationMetadata = componentMetadataCollection.New();
// Associate the component metadata object with the OLE DB Destination Adapter
oledbDestinationMetadata.ComponentClassID = "DTSAdapter.OLEDBDestination";
// Instantiate the OLE DB Destination adapter
IDTSDesigntimeComponent90 oledbDestinationComponent = oledbDestinationMetadata.Instantiate();
// Ask the component to set up its component metadata object
oledbDestinationComponent.ProvideComponentProperties();
// Add an OLE DB connection manager
ConnectionManager connectionManagerDestination = package.Connections.Add("OLEDB");
connectionManagerDestination.Name = "OLEDBDestination";
// Set the connection string
connectionManagerDestination.ConnectionString = "Data Source=localhost;Initial Catalog=TestFuzzyLookup;Provider=SQLNCLI.1;Integrated Security=SSPI;Auto Translate=False;";
// Set the connection manager as the OLE DBDestination adapter's runtime connection
IDTSRuntimeConnection90 runtimeConnectionDestination = oledbDestinationMetadata.RuntimeConnectionCollection["OleDbConnection"];
runtimeConnectionDestination.ConnectionManagerID = connectionManagerDestination.ID;
// Tell the OLE DB Destination adapter to use the destination table
oledbDestinationComponent.SetComponentProperty("OpenRowset", "EmployeeMatch");
oledbDestinationComponent.SetComponentProperty("AccessMode", 0);
// Set up the connection manager object
runtimeConnectionDestination.ConnectionManager = DtsConvert.ToConnectionManager90(connectionManagerDestination);
// Establish the database connection
oledbDestinationComponent.AcquireConnections(null);
// Set up the external metadata column
oledbDestinationComponent.ReinitializeMetaData();
// Release the database connection
oledbDestinationComponent.ReleaseConnections();
// Release the connection manager
runtimeConnectionDestination.ReleaseConnectionManager();
// Get the standard output of the fuzzy lookup componenet
IDTSOutput90 fuzzyLookupOutputCollection = fuzzyLookupMetadata.OutputCollection["Fuzzy Lookup Output"];
// Get the input of the OLE DB Destination adapter
IDTSInput90 oledbDestinationInput = oledbDestinationMetadata.InputCollection["OLE DB Destination Input"];
// Create a new path object
IDTSPath90 ssisPath = pipeline.PathCollection.New();
// Connect the source and destination adapters
ssisPath.AttachPathAndPropagateNotifications(fuzzyLookupOutputCollection, oledbDestinationInput);
// Get the output column collection for the OLE DB Source adapter
IDTSOutputColumnCollection90 fuzzyLookupOutputColumns = fuzzyLookupOutputCollection.OutputColumnCollection;
// Get the external metadata column collection for the OLE DB Destination adapter
IDTSExternalMetadataColumnCollection90 externalMetadataCols = oledbDestinationInput.ExternalMetadataColumnCollection;
// Get the virtual input for the OLE DB Destination adapter.
IDTSVirtualInput90 vInput = oledbDestinationInput.GetVirtualInput();
// Loop through our output columns
foreach (IDTSOutputColumn90 outputColumn in fuzzyLookupOutputColumns)
{
// Add a new input column
IDTSInputColumn90 inputColumn = oledbDestinationComponent.SetUsageType(oledbDestinationInput.ID,
vInput, outputColumn.LineageID, DTSUsageType.UT_READONLY);
// Get the external metadata column from the OLE DB Destination
// using the output column's name
IDTSExternalMetadataColumn90 externalMetadataColumn = externalMetadataCols[outputColumn.Name];
// Map the new input column to its corresponding external metadata column.
oledbDestinationComponent.MapInputColumn(oledbDestinationInput.ID, inputColumn.ID, externalMetadataColumn.ID);
}
#endregion Destination
// Save the package
Application application = new Application();
application.SaveToXml(@"c:TempTestFuzzyLookup.dtsx", package, null);
}
}
}
I need to run a make-table query against an Access database out of an SSIS package. I tried to do this with an OLE DB Command Task but it fails to create the table even though the task execution comes back successful. Any thoughts???
View 1 Replies View RelatedHow to Deploy SQL server Database to another PC, How to create apackage that craetes Database as well as ODBC driver for accessing dataat enduser PC, using .Net VB
View 2 Replies View RelatedHi,
I want to create a local temporary table in execute sql task and and want to use the same in Data flow task as source table.
I follow the following steps to achieve this:
01. Created a new SSIS package
02. Create a connection string to "(local)/." server, "tempdb" database
03. Set the "RetainSameConnection" property value to "TRUE"
04. Set the "DelayValidation" to "TRUE", where ever I found this property
04. In Control Flow I added to items
a. Execute SQL Task
b. Data Flow Task
05. For "Execute SQL task" I set the connection to "tempdb"
06. I written the following query
Create table #transfer_CompaniesToProcess_tbl
(
companyID int not null
)
GO
07. In Data Flow task I added "OLE DB Source" and "OLE DB Destination"
08. In "OLE DB Source" I changed the "Data access mode:" to "SQL command"
09. In "SQL command text:" I entered "select * from #transfer_CompaniesToProcess_tbl"
10. When I clicked on the "OK" button; I ended with following error:
TITLE: Microsoft Visual Studio
------------------------------
Error at Data Flow Task [OLE DB Source [1]]: An OLE DB error has occurred. Error code: 0x80040E14.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Statement(s) could not be prepared.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Invalid object name '#transfer_CompaniesToProcess_tbl'.".
------------------------------
ADDITIONAL INFORMATION:
Exception from HRESULT: 0xC0202009 (Microsoft.SqlServer.DTSPipelineWrap)
------------------------------
BUTTONS:
OK
------------------------------
I gone through the following article and it seems I missed some thing.
http://blogs.conchango.com/jamiethomson/archive/2006/11/19/SSIS_3A00_-Using-temporary-tables.aspx
Can any one have any idea where I am doing wrong?
Thanks
Sreekanth
Trying to figure out the best method of reading in a number of flat files, all with different number of columns and data types and outputting them to a database.
Here's the problem: They are EBCDIC encoded and some of the columns are packed decimal. I've set up one package that takes the flat file, unpacks the decimal (Using UnpackDecimal component) and then sending the rest through a second component to go from EBCDIC -> ASCII.
What I need is a way to do this for every flat file based on the schema for that flat file. One current solution is to write a script/app to create the .dtsx XML file and then execute that for each flat file. It appears like this may be possible, but I haven't gotten far enough to know for sure. So my questions are this:
1) Is there an easier way to do this (ie somehow feed the schema to the package and use it to dynamically set up the column makers and determine which columns get fed to the unpack decimal component.
2) If there isn't a better way, will dynamically creating the .dtsx XML file based on the necessary input/output columns for each flat file work? If so, what is a good source of information on this (information about how the .dtsx XML file is set up, what needs to be changed/what doesn't, etc).
Thanks,
Travis
In the tutorial Creating a Basic Package Using a Wizard > Lesson 1: Creating the Basic Package >
says to use the following sql statement on the query page:
SELECT * FROM [Customers$] WHERE NumberCarsOwned > 0
When I paste the query in I get the message :
This SQL statement is not a query.
Does anyone have any suggestions? The input and output are set up correctly and I have the sample excel file Customers.xls.
I am new to all this, is there some setting I need to change for the tutorial to work or..?
FYI I have installed Sql 2005, Sp1.
how to create package upsert industry and want to do update and insert operations from database.
View 4 Replies View RelatedHi,
We are building an application with
a database that contains Jobs. These Jobs have properties like Name, Code etc.
and some custom properties, definable by the application admin. For bulk import
of Jobs, we want to allow the import of an Excel sheet with the columns Name,
Code and a variable amount of columns. If the header names of these columns in
the Excel sheet match the name of a custom property in the system we want to add
the value of that cell into the database as property
value.
In our Data Flow of our Import
Package in SSIS we added an Excel Source that points to a test excel sheet with
the Name and Code columns and €“ for this example - 3 custom property columns
(Area, Department, Job Family). When we configure the Excel Source in the Excel
Source Editor, we have the option to select the Columns from the Available
External Columns table. But here lays the problem, we do not know at design
time, what custom property columns to expect. We DO expect the Name and Code
columns, but the rest is uncertain at design-time.
That raises the question: Is there
some way to select all of any incoming columns (something like a SELECT * in
T-SQL)? This looks like a big problem since it would mean that the .DTSX XML that is
being generated at design-time would need to be updated at run-time to reflect
the variability of the columns that might be encountered while reading the excel
sheet.
Then, we thought, we could add a Script
Component to our data flow that passes some kind of DataSet (or DataReader) in
which we can walk through the columns ourselves? But then still, we miss the
option to include ANY of the columns while reading an Excel sheet (or any other
datasource by the looks of it)
We are aware of the option of
optional columns in combination with the RaggedRight option, but it seems that
we would have to put all of the columns of a row in just one column and then
extract all the columns later with Derived Columns. But then, since the source
import file is being prepared by an application admin, we want don€™t want to
burden him with this horrendous task of putting everything in one
column.
We would like to have some way of
iterating through all the columns, either in a Script Component or maybe with a
Pivot/Unpivot mechanism.
Does anyone have any suggestions? Are there other options we should have considered?
Hi All,
I have created fact tables and dimension tables in datawarehouse database, and i created a olap cube from those tables.
I want to run SSIS Package which populates these fact and dimension tables from datasources.
Thanks in advance,
Archana
Hi everyone,
There is a small problem encountered while creating a package in sql
server 2005.
Actually i am using a flat file which has 820 rows and 2 columns which
are seperated by line feed(for ROW) and tab(for COLUMN).after
importing i found that ther are only 800 rows imported into the table.
Ather verifying the input file i found out that there are some null
values in the second column so there is no line feed for those
values.
Can anyone please help me how to give multiple delimiters for the same
input flat file.
Hi
I have a problem i receive the following error message when i try to add an new step into a SQL Server Agent job :
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
Additional information:
An exception occured while executing a Transact-SQL statement or batch.
(Microsoft.SqlServer.ConnectionInfo)
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction.(Microsoft SQL Server, Error: 3930)
This error pops up right after i change the type of the step to "SQL Server Intergration Services Package"
I have made the following configurations:
The user group (windows group) that the user belongs has the following roles in msdb :
db_dtsadmin
db_dtsltuser
db_dtsoperator
SQLAgentOperatorRole
SQLAgentReaderRole
SQLAgentUserRole
i have made a proxy to sql server agent which has the following subsystems :
"SQL Server Integration Services Provider" the proxy is tied to the same login which has those SQLagent and dts roles in msdb database.
Im using windows authentication and the user that logs into the sql server is in the same group that i have set all of the rights.
Ps. Clearly im missing some role or right somewhere because as soon as i give the group sysadmin role then all the users in that group can create SSIS steps in the agent.
Ps. Ps. I have been living under the impression that i dont have to give sysadmin rights to people that create ssis packages and schedule then with the agent.