Hello, folks.
I wonder whether I can create a table based on the script in SQL Analyzer.
If this is possible, can you folks tell me how to do it.
Thanks in advance.
Hyunhyo Jun
GIS Research Group
University of Colorado
Hi,
If I want to automatically insert a record which has default value in a table,
how can I create the trigger?
Banti writes "IF i create temporary table by using #table and ##table then what is the difference. i found no difference.
pls reply.
first:
create table ##temp
(
name varchar(25),
roll int
)
insert into ##temp values('banti',1)
select * from ##temp
second:
create table #temp
(
name varchar(25),
roll int
)
insert into #temp values('banti',1)
select * from #temp
both works fine , then what is the difference
waiting for ur reply
Banti"
Using SQL against a DB2 table the 'with' key word is used todynamically create a temporary table with an SQL statement that isretained for the duration of that SQL statement.What is the equivalent to the SQL 'with' using TSQL? If there is notone, what is the TSQL solution to creating a temporary table that isassociated with an SQL statement? Examples would be appreciated.Thank you!!
View 11 Replies View RelatedI am trying to create a table that holds info about a user; with the usual columns for firstName, lastName, etc.... no problem creating the table or it's columns, but how can I "restrict" the values of my State column in the 'users' table so that it only accepts values from the 'states' table?
View 2 Replies View RelatedHello all:
Is it possible to creates fields of the table dynamically?. I have this situation in my project. This is just a small sample. I have row of length 140. I don't wan't to declare all this fields manually using the create table command.
The description of table is as, in this table all the field are of type varchar only, there are like 140 columns.
create dummy emp (
field1 VARCHAR(100), field2 varchar(200), field3 VARCHAR(100).... )
Table: Dummy
================================================== ==
field1 field2 field3..........
Empid Empname empaage1 sam 23...........
2 rai 22............
.
.
.
n raj 45.............
================================================== ==
Now I want to create another table as "EMP" , with proper data type
fields too..
create table emp (
empid int, empname varchar(100), empage int....)
The table should look like as:
Table: EMP
================================================== ==
Empid Empname empaage............
1 sam 23...............
2 rai 22................
.
.
.
n raj 45.................
================================================== ==
I want to do this dynamically.....
Some how I need to extract those field from table[dummy]; the first row acts as a column header for the table[Emp] and the subsequent row acts as a record for the table[Emp]
A small rough snippet of the code will be appreciated....
Waiting for replies........
saby
I am using a Stored procedure in which I am creating a table and dropping that table at the end of execution. This SP is calling every 10 second (but no concurrent access) from my application. Is there any issue using the drop table command in the SP? will it create any memory fragmentation issue in SQL server?
View 7 Replies View RelatedI am attempting to create a stored procedure that will launch at report runtime to summarize data in a table into a table that will reflect period data using an array type field. I know how to execute one line but I am not sure how to run the script so that it not only summarizes the data below but also creates and drops the table.
Any help would be greatly appreciated.
Current Table
Project | Task | Category | Fiscal Year | Fiscal Month | Total Hours
---------------------------------------------------------------------------------------------------------
Proj 1 | Task 1 | Cat 1 | 2007 | 01 | 40
Proj 1 | Task 1 | Cat 2 | 2007 | 02 | 20
Proj 1 | Task 1 | Cat 3 | 2007 | 03 | 35
Proj 1 | Task 1 | Cat 1 | 2008 | 01 | 40
Proj 1 | Task 1 | Cat 2 | 2008 | 02 | 40
Proj 1 | Task 1 | Cat 3 | 2008 | 03 | 40
Proposed Table
Project | Task | Category | Fiscal Month 01 | Fiscal Month 02 | Fiscal Month 03 | Fiscal Year
---------------------------------------------------------------------------------------------------------------------------------------------------
Proj 1 | Task 1 | Cat 1 | 40 | 0 | 0 | 2007
Proj 1 | Task 1 | Cat 2 | 0 | 20 | 0 | 2007Proj 1 | Task 1 | Cat 3 | 0 | 0 | 35 | 2007
Proj 1 | Task 1 | Cat 1 | 40 | 0 | 0 | 2008
Proj 1 | Task 1 | Cat 2 | 0 | 40 | 0 | 2008
Proj 1 | Task 1 | Cat 3 | 0 | 0 | 40 | 2008
Thanks,
Mike Misera
Hi All,
I have a situation with a table that was created for a transactional
system with a 3 columns key. The table is similar to the following:
countrystatecitydescription
11221City A from country 1 and state 12
11321City A from country 1 and state 13
21422City B from country 2 and state 14
21522City B from country 2 and state 15
Now I'm trying to create a dts package that would allow me to build a
city dimension table with unique codes (keys) for each city. What kind of
transformation should I use to translate the old codes (based on the
country-state-city key) into the new ones and preserving the data
integrity?
Thanks,
Ignacio
Hi,
I m new to this forum with a Query
Create table <table name1 > as select * from <table name2>
this works for oracle. do anybody knows its alternative in sqlserver 2000
thanx. :)
I'm trying to create programmatically a table in my db on sql server 2005.1. I created a string "CREATE TABLE ....." and then tried to execute it using my ADO. That didn't work, so I copied the string into a query in sql server and got the message "CREATE TABLE sql is not supported". Why's that? 2. I created a stored procedure in my db that will get the "CREATE TABLE...." string and execute it. I thought it would look something like this: parameter @createString varchar(MAX) BEGIN BEGIN EXEC @createString or @createString END END Both these options didn't work.How can I make it work properly?Thanks.
View 3 Replies View RelatedI need a module to help me create a SQLServer database table. Is there a module that allows users to specify parameters in the creation of a SQLserver table?
View 1 Replies View RelatedDoes anyone know if it is possible to create a tmp table in RAM without pinning it and how to do it? I already knew that SQL has a stored procedure allows pinning a table in RAM.
Thank you for any input.
Hi
I am trying to create a table in sql server 2000 and seem to be getting an error
the code that i am using is as folows:
CREATE TABLE Invoice
(
InvoiceID INT IDENTITY PRIMARY KEY NOT NULL Auto_Increment,
Invoice_no VARCHAR(50),
RefText VARCHAR(50),
CustomerDetails text,
)
I want to be able to have the invoiceid as the primary key that auto increments...
After creating the table id like to import a csv file with only the following data
Invoice_no, RefText, CustomerDetails
is it possible to do this as i want the id to automatically be generated to be unique
thanks
vijay writes "how can i creat a new table as i have in my database"
View 2 Replies View RelatedHow do you create a new table from a SELECT statement of another tableusing MS SQL Server. This is part of a distributed database topic foruniversity. Unfortunately I can only seem to get the new table createdin Oracle and not MS.
View 4 Replies View RelatedI need to create tables from a C# code. I made a stored procedure hoping that I will pass a table name as a parameter: @tabName. The procedure executed in SqlServer All Right but when I called it from C# code it created not the table I put in as a parameter but table "tabName." Otherwise everything else was perfect: coumns, etc.
Here is my stored procedure.
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[CreateTableTick]
@tabName varchar(24) = 0
AS
BEGIN
SET NOCOUNT ON;
CREATE TABLE tabName
(
bid float NULL,
ask float NULL,
last float NULL,
volume float NULL,
dateTimed datetime NULL
)
END
What went wrong?
Thank you.
My program is to create temporary table. To avoid creating the same name table, I have to create it dynamically with this code. Random rand = new Random(); string num = "Temp"+rand.Next(100).ToString(); sql = "CREATE TABLE '"+num+"' ( , , , )"; When it is exeucuted, the error message tell it has error near Temp23(num). Is it possible to create table with this way?
View 1 Replies View RelatedHi All,I will like to create a table from two tables this (explained below) way using a stored procedure. Basically i want the stored procedure to return me the third table but i dont know how to do it.Table ATopicID Topic ----------------------------- 1 Sometopic 12 Some topic 23 Some topic 34 Some topic 4 Table BRateID Rate TopicID---------------------------------------1 5 12 5 13 5 24 4 25 4 36 3 5 Table CTopicID Topic Rate--------------------------------------------1 Some topic1 52 Some topic 2 5 3 Some topic 3 5Basically i have a table that stores topics associated with a particular subject. Those topics are stored in table A above. My users can just read the messages associated with the topic and rate that message. The rating is then stored in table B.Now i will like my users to search for topics with a particular word or sentence in table A and the topics that are returned have a rating they specify. My procedure takes the word or sentence to search in table A and and the rating which will be used in table B. I will like to construct another table that has this newly searched results and return it using a stored procedure or anything simple. I dont know how to do this because i have very little knowledge in stored procedures or sql..... Any help(Code) will be greatly appreciated...
View 11 Replies View RelatedHello there,
I'm going to, by my site, to create the aspnet membership thing.. (you know you can run aspnet_regsql.exe and then its create a lot of tables)But I'm stuck with a table with two primary keys? How the **** is that possible?I got this code to create table:'aspnet_UsersInRolesnonqueryCommand.CommandText = "CREATE TABLE aspnet_UsersInRoles (UserId uniqueidentifier NOT NULL PRIMARY KEY, RoleId uniqueidentifier NOT NULL PRIMARY KEY)"Console.WriteLine(nonqueryCommand.CommandText)Session("Tables") = Session("Tables") + "Number of Rows Affected with table aspnet_UsersInRoles is: " + nonqueryCommand.ExecuteNonQuery().ToString + "<br />"
But you ain't allowed to have two primary keys,How do you then create this table?:
Hope for help, and as you probably already has notice is I'm absolutely not expert to this :D
Ps. Tehre shouldn't already be a code for this in vb?
Hi SQ Gurus,
Please help me with this issue that I am facing. I want to create a table programatically but want to pass its name as a variable. I would like to do something as follows:
CREATE PROCEDURE BS_Create
(@Name nvarchar(25))
AS
CREATE TABLE [dbo].[@Name](
[ID] [int] IDENTITY (1, 1) NOT NULL ,
[Prod_Name] [nvarchar] (75) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL
) ON [PRIMARY]
GO
The table name is passed in as a parameter. No matter what I pass as a parameter, the table name is '@Name', which is not what I want. Instead, if the variable contains the value 'Product', I would like to see a table with the name 'Product' to be created.
How can I solve this problem.
Any help is appreciated!
Krish Chandra
I have made a database device and a database with SQL Server.
After, I have created some tables and I have made inserts, deletes,
updates, select, etc.
I have 23 tables in my database. Now I'm trying to create a new one,
but I can't. I have this error:
"Unable to allocate new page for database 'ODDO'. There are no more
pages available or valid allocation pages.
Space can be created by droping objetcs, extending the database, or
dumping the log with no_log"
I'm not an expert in SQL Server. Can anybodt help me?
What I have to do?. What is a page?. How can I extend my database?
Thank you very much.
Hi all,
i m using sql server2005 CTP...i created a database called TEL and in that database i created a user(in security) as
USE [TEL]
GO
/****** Object: User [COLL_DB] Script Date: 09/27/2005 15:38:51 ******/
GO
CREATE USER [COLL_DB] FOR LOGIN [loginName] WITH DEFAULT_SCHEMA=[COLL_DB]
Now,when i m trying to create a table in the database TEL as
CREATE TABLE [COLL_DB].abc (c numeric)
commit;
it gives me error saying
The specified schema name "COLL_DB" either does not exist or you do not have permission to use it.
Now,can someone tell me...what i have to do to fix this error?????????
thanks...
I am having trouble creating my last table for a project.
I have a table named "Payment".
I have a composite key (ebay_ID & Cellphone_ID).
Would eBay_ID & cellphone_id also be foreign keys since they are the PK of their own table?
I also have an entity called "CC#" and "payment_amt".
For example there is a buyer who purchased 3 diff items, so the ebay_id would be the same and so would the cc#.
Hi
How can i Create a table with variable name
eg
suppose variable x=tab1
I want the table created to be tab1 if x=tab2 then table created shd be tab2.. so how can this be dynamically done(creation of tables as well as stored procs)
i tried : create table @x .. it doesnt seem to work
please help
regards
Hi again,
I want to create a blank table with the same column names as another but with no rows i.e. it is empty. Does anyone know how to do the last part?
I have so far
create table newtest as select * from shared.test ..... (empty bit here?)
Any good advanced sql tutorial urls would be good to.
Thanks in advance :)
Hallo,
I have a table with 3 columns:
table tbl_user_class
===============
user_id (int) PK
class_id (varchar(20)) PK
class_value(varchar(100))
values are like so:
user_id class_id class_value
======================
1 firstname Rogier
1 lastname Doekes
2 firstname Mary
3 lastname Smith
.....
I would like to create result set in the following format
user_id firstname lastname
====================
1 Rogier Doekes
2 Mary Smith
......
How do I accomplish this? I tried using CASE WHEN statements but the best I could come up with was this:
1 Rogier null
1 null Doekes
2 Mary null
2 null Smith
when I did the following t-SQL statement:
select userID,
CASE WHEN classID = 'firstname' THEN classvalue END as 'firstname',
CASE WHEN classID = 'lastname' THEN classvalue END as 'lastname'
FROM tbl_user_class
Thanks for any help,
-Rogier Doekes
I want to create this table:
create table new_price (
new_price_item_id VARCHAR(25),
new_price_item_lst_lnd_cost NUMERIC(7,2),
new_price_item_prc_2 NUMERIC(7,2) NOTNULL)
values (
"000001010045""$127.05""$329.99"
"000001031565""$147.38""$379.99"
"000001050014""$117.61""$299.99"
"000001050023""$274.45""$679.99"
"000001050035""$296.30""$749.99")
Is this the proper SYNTAX to insert multiple rows of values or is there something I missed to differentiate between each row of values?
Brooks C. Davis
IT AdministratorLogistics Manager SFTF LLC dba Ashley Furniture Homestores
DELL POWEREDGE 2850 Dual Core Xeon x3 = 1xDB 1xSQL 1xTS | DELL POWEREDGE 2950 Quad Core Xeon = 1xTS | SERVER 2003 | MS SQL 2005 | PERVASIVE EMBEDDED V.9
Greetings all,
I want to be able to generate a table on the fly. I know I can use dynamic sql to do this but my brains have forzen this afternoon so any help would be much appreciated.
I have the first query that returns one column with three rows. The contents of the these three rows will form the new columns in the dynamically generated table. How can I do this?
Thanks.
I am having problems creating a table in my first database.
When I script:
CREATE TABLE ship (mmsi INT, time INT, longitude INT, latitude INT, cog INT, sog INT, heading INT, navsat INT, imo INT, name CHAR, callsign VARCHAR, type INT, a INT, b INT, c INT, d INT, draught INT, dest CHAR, eta INT); I am returned with an error 1064 with regads to the attributes from "Typ" onwards.
From what I can see this should work.
I have a table right now, that gives when an event was done in a date time (eg. Event done Jan 1, 2014, event 2 done Jan 2, 2014).
What is a feasible way to make a second table to join on this date time which provides the type of worker (eg. part time, full time, volumteer, etc) without making a table with every day, hour and minute as a separate row?
For example, a test was done on Jan 1, 2014 at 1pm, in table A. I was thinking my second table would list every date and time and fill in what type of worker was on at that minute/time. Then I would left outer join with my first table, so the end result would be Event A was done Jan 1, 1pm, therefore it was a: Volunteer worker. Event B was done Jan 1, 2pm, therefore it was a : Full time worker.
But I realize that it is not feasible to write a table with every date/time available to accommodate all the different types of shifts.
I have created new columns fields in a table using EManager. However, I am wondering Which command do we use to create columns through the analyser??? Is it the same like the "Insert into"?
View 3 Replies View RelatedHi,
I need to create a new table in our database.
This table is not linked into the existing schema in anyway, so i'm not sure if I need a primary key or not.
either way, coudl anyone tell me how to create a primary key ni the CREATE TABLE statement.
I have tried searching but cannot find the answer.
many thanks,
Matt