I am looking to create a new view by combining two tables, but i would like to create a new column in the view that identifies what table the data came from. For example I have a Table A and Table B, using a union i combined the two table but i want a new column titled Source which could be populated by A or B.
This is my code so far:
Create View Table_AB As
Select *From Table_A
Union All
Select*From Table_B
I’m receiving the following message when attempting to run the SQL statement below.
Error report:
SQL Command: force view "UIP_SOC"."SEG_VIEW_EWO_2"
Failed: Warning: execution completed with warning
-----------------------
CREATE OR REPLACE FORCE VIEW "UIP_SOC"."SEG_VIEW_EWO_2" ("CODE", "NAME", "EWO4", "EWO6") AS
SELECT DISTINCT code, name
FROM
(
SELECT seg_value AS code, seg_desc AS name, SUBSTR(seg_value,5,4) AS EWO4, SUBSTR(seg_value,5,6) AS EWO6
FROM UIP_SEGMENT_VALUES
WHERE seg_name = 'EWO' AND seg_value IN (SELECT ewo FROM stage_budget_v)
UNION
SELECT CODE,NAME FROM SEG_VIEW_PARENTS WHERE SEG_NAME = 'EWO' AND NOT (CODE IS NULL)
);
----------------
Referenced View Columns:
"SEG_VIEW_PARENTS" ("SEG_NAME", "CODE", "NAME")
Referenced Table Columns:"UIP_SEGMENT_VALUES"
"SEG_NAME" VARCHAR2(20 BYTE) NOT NULL ENABLE,
"SEG_VALUE" VARCHAR2(20 BYTE) NOT NULL ENABLE,
"SEG_DESC" VARCHAR2(200 BYTE),
"SEG_TYPE" VARCHAR2(20 BYTE),
"SEG_COMPANY" VARCHAR2(20 BYTE)
I attempted to create a view in SQL Server 2000 that Unions twoqueries. The first part of the query gets data from the local server,the second part gets info from a linked server. (The query works finein Query Analyzer.)I received this error when I tried to save the query:ODBC error: [Microsoft][ODBC SQL Server Driver] The operation couldnot be performed because the OLE DB provider 'SQLOLEDB' was unable tobegin a distributed transaction.[Microsft][ODBC SQL Server Driver][SQL Server][OLE/DB providerreturned message: New transaction cannot enlist in the specifiedtransaction coordinator.]After a little reading I discovered the "Database limitation":"A view can be created on a table only in the database the viewcreator is accessing".That's my problem... is there a simple solution or alternative tocreating a view?Thanks,Matt
View 2 Replies View RelatedI've got a view that creates a parent child relationship, this view isused in Analysis Services to create a dimension in a datastore. Thisquery tends to deadlock after about 10 days of running smoothly. Onlyway to fix it is to reboot the box, I can recycle the services for aquick fix but that usually only works for the next 1-2 times I call theview.This view is used to create a breakdown of the bill-to locations fromContinent-Global Region-Country-Sub Region-State/Province- City-ZipCodeYes, I know that sounds crazy, but it was a requirement.So why would I get a deadlock on a SELECT Query? Is there a way to setthe Isolation level to Repeatable Read for a view?Here is the view code:CREATE View dbo.vwBillToas-- US ZipCodeSelect 'Parent'=z.City+' ('+ ISNULL(RTRIM(z.State_shrt), '0') +cast(IsNull(z.US_Region_wk,0) as varchar) + ')',z.Zipcode_WK as 'Child',z.ZipCode_WK as 'Child_ID'Fromdbo.DIM_POSTAL_CODES_US zinnerjoin dbo.FACT_SALES fonz.ZipCode_WK=f.Bill_ToWherez.US_Region_wk IS NOT NULLGroupby z.City,z.ZipCode_WK,US_Region_wk, z.State_shrtUnion--CitySelect 'Parent'=z.State_Long+' ('+cast(IsNull(z.US_Region_wk,0) asvarchar)+')',z.City as 'Child',z.City + ' ('+ ISNULL(RTRIM(z.State_shrt), '0') +cast(IsNull(z.US_Region_wk,0) as varchar) + ')' as 'Child_ID'Fromdbo.DIM_POSTAL_CODES_US zWherez.US_Region_wk IS NOT NULLGroupby z.State_Long,z.City,z.State_shrt,z.US_Region_wkUnion-- Canada ZipCodeSelect 'Parent'=z.City+ ' ('+ ISNULL(RTRIM(z.province_shrt), '0') +')',z.Zipcode_WK as 'Child',z.Zipcode_WK as 'Child_ID'Fromdbo.DIM_POSTAL_CODES_CAN zinnerjoin dbo.FACT_SALES fonz.ZipCode_WK=f.Bill_ToGroupby z.Province_Long,z.ZipCode_WK, z.City, z.province_shrtUnion--CitySelect 'Parent'=z.Province_Long,z.City as 'Child',z.City+ ' ('+ ISNULL(RTRIM(z.province_shrt), '0') + ')' as'Child_ID'Fromdbo.DIM_POSTAL_CODES_CAN zinnerjoin dbo.FACT_SALES fonz.ZipCode_WK=f.Bill_ToGroupby z.Province_Long,z.ZipCode_WK, z.City, z.province_shrtUnion-- Canada ProvinceSelect 'CANADA',Province_Long,Province_LongFromdbo.DIM_POSTAL_CODES_CANGroupby Province_LongUnion-- CountrySelect t.Region_NK,c.Country_Name,c.Country_NameFromdbo.DIM_COUNTRY cInnerJoin dbo.DIM_WORLD_REGION tOnc.Region_WK=t.Region_WKWherec.Country_Name Is Not NullGroup by t.Region_NK, c.Country_NameUnion-- SubRegionSelect c.Country_Name,sr.US_Region_Name,sr.US_Region_NameFromdbo.DIM_US_REGION srInnerJoin dbo.DIM_COUNTRY cOnsr.Country_wk=c.Country_WKGroupby c.Country_Name, sr.US_Region_NameUnion--RegionSelect sr.US_Region_Name,c.State_Long,c.State_Long+' ('+cast(c.US_Region_wk as varchar)+')'Fromdbo.DIM_US_REGION srInnerJoin dbo.DIM_POSTAL_CODES_US cOnsr.US_Region_WK=c.US_Region_WKGroupby sr.US_Region_Name, c.State_Long,c.US_Region_wkUnion-- ContinentSelect Null,Region_NK,Region_NK[color=blue]>From dbo.DIM_WORLD_REGION[/color]WhereRegion_NK Is Not Null
View 1 Replies View RelatedI am looking to create a constraint on a table that allows multiplenulls but all non-nulls must be unique.I found the following scripthttp://www.windowsitpro.com/Files/0.../Listing_01.txtthat works fine, but the following lineCREATE UNIQUE CLUSTERED INDEX idx1 ON v_multinulls(a)appears to use indexed views. I have run this on a version of SQLStandard edition and this line works fine. I was of the understandingthat you could only create indexed views on SQL Enterprise Edition?
View 3 Replies View RelatedHi guys 'n gals,
I created a query, which makes use of a temp table, and I need the results to be displayed in a View. Unfortunately, Views do not support temp tables, as far as I know, so I put my code in a stored procedure, with the hope I could call it from a View....
I tried:
CREATE VIEW [qryMyView]
AS
EXEC pr_MyProc
and unfortunately, it does not let this run.
Anybody able to help me out please?
Cheers!
I have 3 tables I want to use in a view. Table A has field 1,2,3,4,5and table B has field 1,2,3,4,5. I want to do a union on these. (I havedone so successfully if I stop here) I also want to join table C whichhas field 1,6,7,8,9. I would like to join on field 1 and bring in theother fields. I can join table C to A or B. I can union table A and Bbut I do not know how to both union A and B then join C. Can someoneplease help me? Thanks in advance.
View 7 Replies View RelatedHi,
I have a view V1 created as a plain UNION from 2 tables:
SELECT * FROM T1
UNION
SELECT * FROM T2
If I create another view V2 just filtering V1 through a WHERE clause (e.g. SELECT * FROM V1 WHERE x < y) I don't get any rows returned.
However, if I write the SELECT clause within each branch of the former UNION, I correctly get all the rows.
Is this a known bug of SQL Server 2000? If yes, is there a SP fixing it?
thx,
smiley61
I have a view that is using UNION ALL to combine common fields of two tables, this is my statement:
SELECT ID, STATUS, ACTIVE_STATUS, NS_PARENT_CHANGE_NUM, NS_REP, NS_CHANGE_NUM, NS_CHANGE_IDENTIFER
FROM dbo.CT_FRAME_T
UNION ALL
SELECT ID, STATUS, ACTIVE_STATUS, NS_PARENT_CHANGE_NUM, NS_REP, NS_CHANGE_NUM, NS_CHANGE_IDENTIFER
FROM dbo.CT_ATM_T
This works fine, but I would also like some fields that do not match to appear in the view. It is OK if the value is null for the rows of data from the other table that doesn't have the columns.
The other columns are called DLCI from CT_FRAME_T and then VPI, VCI from CT_ATM_T.
My view would then return ID, STATUS, ACTIVE_STATUS, NS_PARENT_CHANGE_NUM, NS_REP, NS_CHANGE_NUM, NS_CHANGE_IDENTIFER, DLCI (where applicable), VPI and VCI (where applicable). Is this possible?
HI, Guys:
I've some AT_DATE tables (eg: AT_20080401, AT_20080402, ...) in SQLServer DB, and these AT_XX table have same columns. but table count could be variant, so I have to query sysobjects to get all of these tables. like this:
select name from sysobject where name like 'AT_%'
Now I try to create a view AT which is the union of all these AT_XX tables, such as:
Code Snippet
Create View AT as
select * from AT_20080401
union
select * from AT_20080402
union ...
but since I'm not sure how many tables there, it would be impossible to write SQL as above.
though I could get this union result via stored-procedure, view couldn't be created on the resultset of a procedure.
Create View AT as
select * from AT_createView() <-- AT_createView must be a function, not procedure
I've checked msdn, there is Multi-statement table-valued function, but this function type seems to create one temporary table, I don't want to involve much of insert operation because there could be more than 1million records totally in these AT_XX tables.
So is there any way to achived my goal?
any reference would be appreciated, thanks !
I have a performance issue with one of the views when I join the view with a temp table
I have 2 Views - View1 and View2.
There is a third view - view_UNION where the
view_UNION =
SELECT * FROM View1
UNION ALL
SELECT * FROM View2
If I have a query like -
Select view_UNION.* FROM
view_UNION INNER JOIN #TMP ON #TMP.ID = view_UNION.ID
the execution is too slow.
But if I execute the views separately, I get good performance.
How to improve the performance of the view_Union
Anyone see a way to trick the optimizer into not scanning all tables involved in the view?
-- create two test tables
create table dbo.test1
(testID int, TestName varchar(10))
create table dbo.test2
(testID int, TestName varchar(10))
-- populate
declare @i int
set @i = 1000
while @i > 0
begin
insert into dbo.test1
select @i, '1.' + cast(@i as varchar(5))
set @i = @i - 1
end
insert into dbo.test2
select 1, '2.1' union all
select 2, '2.2'
go
-- create view
create view dbo.vw_Test
as
select1 as QueryID,
TestName
fromdbo.Test1
union all
select2 as QueryID,
TestName
fromdbo.Test2;
go
-- this works as i want, only scans table dbo.Test2
select *
fromdbo.vw_Test
whereQueryId = 2
-- joining to a table triggers scan of both tables in view:
declare @table table (QueryID int)
insert into @table
select 2;
selectvt.TestName
fromdbo.vw_Test vt
join@table t on
vt.QueryID = t.QueryID
Using the showplan I can see why the optimizer ends up scanning all tables, but maybe there is a way to force it to use the QueryID param evaluation earlier in the filtering.
Nathan Skerl
I want to create a raw SQL resultset for outputting to Excel with some artificial headers transposed over the top of the 2nd part of the Union's column names. The first part of the Union will be the Headers. Like this, the space to the left of the topmost columns is preferably empty ....
COL 1    COL2     COL3      COL4 etc.                        BEH                            BIG       BPL etc.
*************************************Â Â INTAKTÂ Â Â Â Â Â DEFEKTÂ Â Â Â Â Â Â INTAKT DEFEKTÂ Â Â Â Â Â Â Â Â INTAKT
*************************************Â Â Â Â Â Â BÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â EÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â BÂ Â Â Â Â Â Â Â EÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â B
I just want the text above as a 3 line header and there won't be any values obviously. Then the 2nd query will be joined to the above with a Union all. The 2nd query has all the same column names as what will be given in the first set above. What is the SQL Syntax for doing so? Do I have to use a from clause?
i have a table which has 2 columns 1 'report' 2 'part'
now in my 'report' cloumn i have # with 6 digits ex. '111111' and 'part' has '1, 2, 3, 4,..to 50'
i want to create a view that will put them together in format like this:
1111110001
1111110002
1111110003 .. and on
it needs to be in 10 digits.
is there anyway i can create a View or may be a column in the table which can create the #'s in this format.
What are some possible purposes of creating a view and how can it be used to reinforce data security. What description of circumstances can be used for a view to save re-programming?
View 1 Replies View RelatedHi All,
I have a sql command with temporary tables, but whenever I am trying to create a view with temporary tables
I am getting an error as below:
"Views or functions are not allowed on temporary tables. Table names that begin with ‘#’ denote temporary tables."
Please anybody let me know is it possible to create a view with temporary tables in SQL Server 2005.If not, then is their any way how I can create a view with temporary tables.
Thank You
Hi All,
I have a sql command with temporary tables, but whenever I am trying to create a view with temporary tables
I am getting an error as below:
"Views or functions are not allowed on temporary tables. Table names that begin with ‘#’ denote temporary tables."
Please anybody let me know is it possible to create a view with temporary tables in SQL Server 2005.If not, then is their any way how I can create a view with temporary tables.
Thank You
I need to create a view that scores a research assessment. So I havequestions 1 through 10, but the problem is that Q3 and Q5-10 have to berecoded so that if the response is 3, it becomes 0, 2=1, 1=2 and 0=3.So this is what I have. I keep getting an error message that there is"incorrect syntax near the keyword THEN". I don't know which "THEN" itis referring to (or all of them)?? HELP! I am new to this.CREATE VIEW name ASSELECT ID, DATE, TOTAL=Q1+Q2+CASE WHEN (Q3=0 THEN 3 WHEN Q3=1 THEN 2 WHEN Q3=2 THEN 1 WHEN Q3=3 THEN0)+Q4+CASE WHEN (Q5=0 THEN 3 WHEN Q5=1 THEN 2 WHEN Q5=2 THEN 1 WHEN Q5=3 THEN0)+CASE WHEN (Q6=0 THEN 3 WHEN Q6=1 THEN 2 WHEN Q6=2 THEN 1 WHEN Q6=3 THEN0)+CASE WHEN (Q7=0 THEN 3 WHEN Q7=1 THEN 2 WHEN Q7=2 THEN 1 WHEN Q7=3 THEN0)+CASE WHEN (Q8=0 THEN 3 WHEN Q8=1 THEN 2 WHEN Q8=2 THEN 1 WHEN Q8=3 THEN0)+CASE WHEN (Q9=0 THEN 3 WHEN Q9=1 THEN 2 WHEN Q9=2 THEN 1 WHEN Q9=3 THEN0)+CASE WHEN (Q10=0 THEN 3 WHEN Q10=1 THEN 2 WHEN Q10=2 THEN 1 WHEN Q10=3THEN 0) ENDFROM tablename
View 2 Replies View Related
Hi All,
I have a sql command with temporary tables, but whenever I am trying to create a view with temporary tables
I am getting an error as below:
"Views or functions are not allowed on temporary tables. Table names that begin with €˜#€™ denote temporary tables."
Please anybody let me know is it possible to create a view with temporary tables in SQL Server 2005.If not, then is their any way how I can create a view with temporary tables.
Thank You
I currently have a website with a page that displays the flags/ keys of the entire roster of guilded characters. Some more background is that I run a website for my Everquest guild, users can log in , create characters , and update their flags / keys.
There are 4 associated tables that are used in displaying the flags.
the Characters , Flags, Expansion, and Char_Flags tables. The char_flags table consists of 2 foreign keys and a bit field for enabled / disabled.
Char_flags = char_fk, flag_fk, enabled (bit)
The select statement I'm currently using to get information is as follows.
SELECT Expansion.ExpansionName, Flags.Flag_Name, Characters.Char_Name, char_flags.enabled FROM char_flags INNER JOIN Flags ON char_flags.Flag_FK = Flags.Flag_PK INNER JOIN Expansion ON Flags.Expansion_FK = Expansion.ExpansionPK INNER JOIN Characters ON char_flags.Char_FK = Characters.Char_PK WHERE (Expansion.ExpansionPK = @expansion)
That displays the information in a format like
Expansion Name, FlagName, CharacterName, Enabled. And there are usually 10 -15 flags per expansion so this lists the expansion 10 times, each flag name, then the character name 10-15 times, and wether or not the flag is enabled.
I would like to display the information a little differently and I'm not sure how to. I would like to display the inormation like this
Flag Name 1 Flag Name 2, Flag name 3, Flag Name 4, etc...
Char 1 X X X
Char2 X X X
Char 3 X X X X
Char 4
Char 5
etc
where the characters make up the first column, the flag names make up the first row(headers) and wether or not the flag is enabled is in the column under the corresponding flag.
This way the name of the flag, and the character name are only displayed one time instead of the flags and character names being repeated over and over.
If anyone can help me on how to display the data I would appreciate it. Here is a link to the page to show how it looks now if it helps www.shattereddestinies.net/flagstest.aspx
Thanks
Brad Fortner
I have a query on one of my pages that is just too large to keep in the page, so I need to reference a stored view in sql. I'm kind of new to this, so I'm having trouble getting the syntax right. The query is just a simple select statement using the results of several textboxes as parameters. I know how to do the query inside an asp.net page, but when I move it to sql, I don't know how to reference the textbox value i.e. @textbox. Here's what I have so far:
USE [Maindb]
GO
CREATE VIEW [tblMain_view] (@textbox nvarchar(30)) ????
AS SELECT dbo.tblMain.Field1, ....
FROM dbo.tblMain
WHERE dbo.tblMain.Field1 = @textbox and ....
First of all, I know that where I declare @textbox is wrong, so where is the right place to declare it? Also, how do I reference the view from the webpage and do I still use:
cmd.SelectCommand.Parameters.Add . . .
in the page to establish the value. Anyone know a good tutorial on this. All the ones I've found were either in C# or didn't really apply. I need to know how to do this in VB. Thanks
Hi I have two SQL server 2000 machine in my corporateHow to create a SQL View if the database table is located on another SQL server?Example :I am currently working at SQL Server "S01", but need to create a sql view to table customer on "Marketing" database located on SQL Server "S02"if the table is reside on the same machine then it's simple for me, but this customer table is not located on "S01" but located on different machine "S02"how to do this? any tutorial?thanks a lotYonscun
View 2 Replies View RelatedHi guys,
I am trying to create a view through SP
as follows, but I am getting as error as Invalid syntax near view.
Please let me know where I am doing wrong.
Thanks,Rau
CREATE PROCEDURE PurgeReport
@intJob as int
AS
if @intjob=1
begin
CREATE VIEW Purge AS SELECT Btch_id AS Batch_ID, DLN, Process,End_DLN, Job,
Tcode
FROM Batch_HDR
end
Hi
I want to know if we can create indexes on Views in SQL 7.0. If yes, then how
Thanks
alsi
Hi
Need help in writing a query. I have a table contains details about an item. Each item belongs to a group. Items have different status. If any one of the item in a group is not "Completed", then the itemgroup is in state incomplete. if all the item under the group is completed then the item group itself is completed. Now I need to create a view with itemgroup and itemstatus.
Suppose I have five records
item itemgroup status
1 1 complete
2 1 Xyz
3 2 complete
4 2 complete
5 2 complete
my view should be
itemgroup status
1 incomplete
2 complete
All the Statuses are not predefined...they get added as and when required........
Right now I am using a function. But dont want to use it for performance reasons. Would appriciate any help.
Thanks
I'm using SQL Server 2008 to solve the following exercise.
I have three Tables:
Table CUSTOMER with columns: CustomerID,Company,ContactName,Phone
Table ORDER with columns: OrderID,OrderDate,ShippedDate,ShipperID,Freight,CustomerID
Table Shipper with columns:ShipperID,Company,Phone
I need to Create a view listing the shipper and the number of unshipped orders. I have been trying to use joins or possibly subqueries, but I'm not getting a correct result for a ShipperID with NO unshipped orders.My view should looks like: ShipperID, Company, Phone, UnshippedOrders
Hi im trying to create a view that creates another column for a table and then adds the value but i cant get it could sum1 help
Create View BONUS_PAYOUTS As
Alter Table Employee
Add EMP_BONUS Decimal(6,2)
Update Employee
Set EMP_BONUS = EMP_PCT / 500000
Select Employee.EMP_LNAME, Employee.EMP_FNAME, Employee.EMP_PCT, Position.POS_TITLE, Employee.EMP_BONUS
From Employee
Inner Join Position On Employee.POS_ID = Position.POS_ID
i tried running the statement :
(1)
create view qcostcentre
as
select * from dbo.costcentre.dtblcostcentre
>ERR: Msg 208, Level 16, State 1, Procedure qcostcentre, Line 4
Invalid object name 'dbo.costcentre.dtblcostcentre'.
(2)
create view qcostcentre
as
select * from costcentre.pcusers.dbo.dtblcostcentre
>ERR: Msg 7202, Level 11, State 2, Procedure qcostcentre, Line 4
Could not find server 'costcentre' in sys.servers. Verify that the correct server name was specified. If necessary, execute the stored procedure sp_addlinkedserver to add the server to sys.servers.
note: pcusers is a user of 2 database (costcentre & datamaster) with dbo_datareader owned & role schema .
I am trying to create an indexed view, on a date from a date dimension table...I am new to SQL, and I am at a loss of ideas on this one. Any help would be greatly appreciated!
Here is the Error I am given
"Msg 4513, Level 16, State 2, Procedure VEW_F_MZT_ORDER_HEADER_DAY, Line 3
Cannot schema bind view 'JJWHSE.VEW_F_MZT_ORDER_HEADER_DAY'. 'JJWHSE.VEW_F_INVC_SHIP_TO' is not schema bound.
Msg 1939, Level 16, State 1, Line 1
Cannot create index on view 'VEW_F_MZT_ORDER_HEADER' because the view is not schema bound."
Here is my code..
CREATE VIEW [JJWHSE].[VEW_F_MZT_ORDER_HEADER_DAY] WITH SCHEMABINDING
AS
SELECT TEW_D_DT.DT_KEY AS DATE_KEY,
VEW_F_MZT_ORDER_HEADER.LOCATION_KEY AS LOC_KEY,
TEW_D_LOC.LOC_DESC AS LOC_DESC ,
TEW_D_LOC.RGN_DESC AS REGION_DESC,
TEW_D_LOC.DISTRICT_DESC AS DISTRICT_DESC,
ISNULL(SUM(VEW_F_INVC_PAY_EXT.PRORATED_NET_PRICE),0) AS CONCIERGE_FLASH,
COUNT_BIG(*) AS COUNT
FROM
JJWHSE.VEW_F_INVC_SHIP_TO VEW_F_INVC_SHIP_TO
INNER JOIN
JJWHSE.VEW_F_INVC_PAY_EXT VEW_F_INVC_PAY_EXT
ON
VEW_F_INVC_SHIP_TO.DATE_KEY = VEW_F_INVC_PAY_EXT.DATE_KEY
AND VEW_F_INVC_SHIP_TO.ORDER_NUMBER = VEW_F_INVC_PAY_EXT.ORDER_NUMBER
AND VEW_F_INVC_SHIP_TO.INVOICE_NUMBER = VEW_F_INVC_PAY_EXT.INVOICE_NUMBER
AND VEW_F_INVC_SHIP_TO.SHIP_TO_NUMBER = VEW_F_INVC_PAY_EXT.SHIP_TO_NUMBER
INNER JOIN
JJWHSE.VEW_F_INVC_DTL VEW_F_INVC_DTL
ON
VEW_F_INVC_DTL.DATE_KEY = VEW_F_INVC_SHIP_TO.DATE_KEY
AND VEW_F_INVC_DTL.ORDER_NUMBER = VEW_F_INVC_SHIP_TO.ORDER_NUMBER
AND VEW_F_INVC_DTL.INVOICE_NUMBER = VEW_F_INVC_SHIP_TO.INVOICE_NUMBER
AND VEW_F_INVC_DTL.SHIP_TO_NUMBER = VEW_F_INVC_SHIP_TO.SHIP_TO_NUMBER
AND VEW_F_INVC_DTL.LINE_NUMBER = VEW_F_INVC_PAY_EXT.LINE_NUMBER
AND VEW_F_INVC_DTL.SEQUENCE_NUMBER = VEW_F_INVC_PAY_EXT.SEQUENCE_NUMBER
AND VEW_F_INVC_DTL.NON_INVENTORY = 'N'
AND VEW_F_INVC_DTL.GIFT_CARD = 'N'
INNER JOIN
JJWHSE.VEW_F_MZT_ORDER_HEADER VEW_F_MZT_ORDER_HEADER
ON
VEW_F_INVC_DTL.ORDER_NUMBER = VEW_F_MZT_ORDER_HEADER.ORDER_NUMBER
AND VEW_F_MZT_ORDER_HEADER.ACTIVE_FLAG = 1
INNER JOIN
JJWHSE.TEW_D_DT TEW_D_DT
ON
VEW_F_INVC_DTL.DATE_KEY = TEW_D_DT.DT_KEY
INNER JOIN
JJWHSE.TEW_D_LOC TEW_D_LOC
ON
VEW_F_MZT_ORDER_HEADER.LOCATION_KEY = TEW_D_LOC.LOC_KEY
WHERE VEW_F_INVC_SHIP_TO.CHANNEL = 'I'
GROUP BY TEW_D_DT.DT_KEY , VEW_F_MZT_ORDER_HEADER.LOCATION_KEY , TEW_D_LOC.LOC_DESC ,
TEW_D_LOC.RGN_DESC , TEW_D_LOC.DISTRICT_DESC
GO
CREATE UNIQUE CLUSTERED INDEX IX_VEW_F_MZT_ORDER_HEADE_DAY ON JJWHSE.VEW_F_MZT_ORDER_HEADER ( DATE_KEY )
Hi all. I'm new to SQL Server and I've run into a tough problem. I currently have a SQL Server database with 54 US states/territories tables. I'm working on creating a view so that I can view all the states data in a single table-like structure. I've mapped all the columns from all the different tables to their new names and made sure that all the new attributes match. When I use the Management Express tool to open the view, it executes but fails because for some reason it's chosen to map a field called 'id' into an int, rather than a varchar. Is there a way to force the view to treat the 'id' as a varchar and not an int? I can't see a way to change its type through the GUI tools.
View 7 Replies View Related
Hi folks!!
I have been working on a view and now I want to create a table which has not only similar columns and datatypes but also same data as I have fetched in the view.
How can I do that? Do I have to use a cursor or there is a simpler way to do it?
Please advice me here..
Can I use
Create table <tablename> as ( Select * from <viewname>) ?????
Thanks in advance for reading this.
Tanya
Hello,I am having an error when using the CREATE VIEW statement and trying to execute it from an ASP.net page. I get an error that says something along the lines of 'dbo' schema does not exist or you do not have permissions to access it. I have checked and the user has been granted every permission I can think of (including setting it to the DB owner), but it does not work. I am able to execute all the Select, Update, Insert statements that I wish to, and when I copy the statement into the SQL 2005 Management studio query menu it works perfectly, it just gives the error message from the ASP.net page.Here is an example (or as close as I can remember at this point) of some code I tried:myCommand.Connection = myConnectionmyCommand.Open()myCommand.CommandText = "Create View TestView as Select 1, 2"myCommand.ExecuteNonQuery()myCommand.Close() Any help would be appreciated.Thanks,StuporMan
View 7 Replies View RelatedI am still confounded with how to create a VIEW involving multiple DATATABLES in a DATASET. Could someone point out a MSDN page where I can see this working and how I go about doing this? Let me re-iterate - I want to create a VIEW that uses JOIN type statements that involves multiple DATATABLES in my loaded DATASET.
View 1 Replies View Related