We have two domains in our organisation, both with transitive trust of one another.
In our main domain we have a report server which is available for all users across both domains to access and use. Most of the time there isn't a problem but I'm having a bit of an issue with users from our second domain accessing a linked report containing 13 subreports.
The main report is fine and all users can view this, however, all subreports show an error message to users in our second domain.
As a bit of an experiment I have even given one user Content Manager rights on the report server but this hasn't solved the problem. I have checked that permissions are correct on ther server, folders and data sources dozens of times and cannot find any reason why second domain users are having this problem.
If anyone has any suggestions on how to solve this I would be grateful for help.
I have client machine in one domain, say A domain , on which I have installed .net 2.0 without any problem. I have report server running in other domain (B domain) where I have deployed few models which will be used from domain A to create ad hoc reports by launching Report Builder. I can access other reports in domain B from A
But when I click on Report Builder ..it tries to connect to server in domain B but fails to connect and shows following log in a text pop up
I know, problem is because of cross domain communication but question is then how to fix it ? what changes I need to do for that in firewall, domain etc etc settings?
Here is the error, I have highlighted lines which might give some clue:
ERROR SUMMARY Below is a summary of the errors, details of these errors are listed later in the log. * Activation of http://192.168.1.197/ReportServer/ReportBuilder/ReportBuilder.application resulted in exception. Following failure messages were detected: + Downloading http://192.168.1.197/ReportServer/ReportBuilder/ReportBuilder.application did not succeed. + The remote server returned an error: (500) Internal Server Error.
COMPONENT STORE TRANSACTION FAILURE SUMMARY No transaction error was detected.
WARNINGS There were no warnings during this operation.
OPERATION PROGRESS STATUS * [12/19/2006 6:49:58 AM] : Activation of http://192.168.1.197/ReportServer/ReportBuilder/ReportBuilder.application has started.
ERROR DETAILS Following errors were detected during this operation. * [12/19/2006 6:50:14 AM] System.Deployment.Application.DeploymentDownloadException (Unknown subtype) - Downloading http://192.168.1.197/ReportServer/ReportBuilder/ReportBuilder.application did not succeed. - Source: System.Deployment - Stack trace: at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next) at System.Deployment.Application.SystemNetDownloader.DownloadAllFiles() at System.Deployment.Application.FileDownloader.Download(SubscriptionState subState) at System.Deployment.Application.DownloadManager.DownloadManifestAsRawFile(Uri& sourceUri, String targetPath, IDownloadNotification notification, DownloadOptions options, ServerInformation& serverInformation) at System.Deployment.Application.DownloadManager.DownloadDeploymentManifestDirectBypass(SubscriptionStore subStore, Uri& sourceUri, TempFile& tempFile, SubscriptionState& subState, IDownloadNotification notification, DownloadOptions options, ServerInformation& serverInformation) at System.Deployment.Application.DownloadManager.DownloadDeploymentManifestBypass(SubscriptionStore subStore, Uri& sourceUri, TempFile& tempFile, SubscriptionState& subState, IDownloadNotification notification, DownloadOptions options) at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut) at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state) --- Inner Exception --- System.Net.WebException - The remote server returned an error: (500) Internal Server Error. - Source: System - Stack trace: at System.Net.HttpWebRequest.GetResponse() at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
COMPONENT STORE TRANSACTION DETAILS No transaction information is available.
I have a base folder (Report Folder A) which has several reports. One of these is a report that is simply a subreport of one of the others in the folder (it uses different default parameters, which is why it's necessary).
I then created another folder (Report Folder B) for users who only have access to some of the data in the reports...so they have browser access to Folder B but not Folder A. All of the reports for the users work except for the one that contains the subreport. When I run the report with a subreport I get the message: "Error: Subreport could not be shown". I'm guessing this is because the users don't have access to the base report. Does anyone have an idea of how to work around this without giving the users access to the base report (in Folder A)?
I am trying to create a report with a sub report in Sql Server 2012 using Report Builder Version 3. Â I can run the subreport without any problems. Â I read where using a shared connection can cause this error so both the main report and the subreport use a connection that is embedded in my report. Â
For testing, I created the subreport without a parameter and added it to the main report. Â When I ran it that way, the report worked and sub report displayed the data. Â So I know it can read from the database.It seems to only give me this error when I am trying to tie the two reports together using a parameter. Â
-A "master domain" AD, a "sub domain" AD, a trust relationship between the two (sub trust master) -A sql server 2005 on a win server 2003 in "sub domain" AD -A linked server to "sub domain" AD -A linked server login using a "sub domain" admin acccount -A view to this linked server -A grant on masterDomain/Domain Users to the database -A grant on subDomain/Domain Users to the database -We want all connections done through "Windows Authentication" not "Database Authentication".
Queries on the view work fine using "sub domain" user accounts. Queries on the view fail using "master domain" user accounts (including master domain admin accounts)
"Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "ADsDSOObject" for linked server "ADSI" reported an error. The provider indicates that the user did not have the permission to perform the operation."
All connections are done through "Windows Authentication" not "Database Authentication".
Can we establish cross domain connectivity with "Windows Authentication" ?
Below are details of the implementation:
SELECT TOP (100) PERCENT * FROM OPENQUERY(ADSI, 'SELECT displayname, givenName, sn, cn (etc...) FROM ''LDAP://OU=PEOPLE,DC=subDomain,DC=com'' WHERE objectCategory = ''Person'' AND objectClass = ''user'' ')
In SQL Server Mngt Studio in Server Objects/Linked Servers/Providers/ ADSI properties security tab I have:
"connections will: <be made using this security context> Remote login:'subDomainAdminAccnt' With password: 'subDomainAdminAccntPassword'
Error: Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "ADsDSOObject" for linked server "ADSI" reported an error. The provider indicates that the user did not have the permission to perform the operation.
Msg 7320, Level 16, State 2, Line 1
Cannot execute the query "SELECT displayname, givenName, sn, cn
FROM 'LDAP://OU=PEOPLE,DC=subDomain,DC=com'
WHERE
objectCategory = 'Person'
AND objectClass = 'user'
" against OLE DB provider "ADsDSOObject" for linked server "ADSI".
How do I hide a subreport if the parent report row containing the subreport is a certain value? I am attempting to create a statement with ageing buckets. In the main body of the report I have to display payments and invoices. If the invoice row is blank, I need to hide the row containing the subreport.
I built SP's to create the Distributor/Publisher and Subscriber parts of Snapshot Replication. All run fine on 2 SQL2K installs on the SAME Domain.
BUT if I try to cross to another Domain (SQL2K as well) = NO JOY.
Error @ Subscriber doing a PULL: "Cannot connect to Distributor..."
Tried using sa, administrator, NEW Local user, etc. & continue getting the error. ALSO tried changing the Login of SQL & SQL Agent Services to the SAME Login on BOTH machines.
We are using SQL Server 2012 . We have configured the Database mail Services. Issue is, the mails are going to only inside the domain not going cross domain Email address like hotmail,gmail and etc. But from outlook client the mails are going to cross domain Emails. Same issue is in SSRS Email Services also. We have checked the SMTP Server, we could not figured it out.
Lets say I have a single instance SQL Server on a 2 node cluster with node names Server X and Server Y. These are part of Domain A.
SQL Agent Account runs under service account - DomainASQLAct.
Now I have Server Z which is a standalone SQL Instance on Domain B and there is no trust between domain A and B, not even one way trust.
Even though I dont have trust, I need to configure log shipping for the SQL Instance which is clustered under Domain A to a standalone box in Domain B.
Microsoft recommends Local Account(SQL Agent) to be used for Cross Domain Log Shipping. Also when there is no trust, MSFT recommends to use the same login name and password, however as my setup includes a cluster and cluster cannot have local account I'm not sure what will be the best strategy to follow here.
I have service broker working 100% with an initiator - forwarder - target, all in the same domain using windows authentication on the endpoints, for all instances' the sql server service run under the same domain account, which in turn is granted connect on the various endpoints. This all works 100%
However i have a scenario where the initiator will be in a different trusted domain.
I need to know if i am correct in thinking that the initiator sql server servcie account can run under DomainAsqlservice, the target instance sql server servcie can run under DomainBsqlservice, then on the forwarder i simply grant connect on the forwarder endpoint to both DomainAsqlservice and DomainBsqlservice.
I want to use Transaction(MS DTC) in SSIS package across domain. It's working fine if both the servers are in Corpnet microsoft domain but failing it one of the server at extranet microsoft domain. I did all the required settings for MS DTC service to run for distrubuted transaction and in SSIS package did the "TransactionOption" property for the container object to "Required" and for all inner tasks to "Supported". Is it possible or a Security voilation which won't allow to do through SSIS package.
Example: I have a database on Extranet server and a database at Corpnet Server.
Sql Job will pull the data from Extranet Database to Corpnet database through SSIS package and update back to Extranet database. Job will reside on Corpnet server.
SSIS package is failing with the error message: The AcquireConnection method call to the connection manager "<Connection Manager name>" failed with error code 0xC0202009.
Any special setting do we require for this. I did the following setting on both the servers:
Ø MS DTC should run on both the servers under €œNetwork Service€? Ø Set the following on both the servers(ExtranetCoptnet) to run on a Distributed Transaction: § Go to "Administrative Tools > Component Services" § On the left navigation tree, go to "Component Services > Computers § €œMy Computer" (you may need to double click and wait as some nodes need time to expand) § Right click on "My Computer", select "Properties" § Select "MSDTC" tab § Click "Security Configuration" § Make sure you check "Network DTC Access", "Allow Remote Client", "Allow Inbound/Outbound", "Enable TIP" § The service will restart
Note: If I will chage the Extranet server to Corpnet then it's working file for me.
Is there an issue with using domain IDs with linked servers in 2KSP3 ? For some reason I get login failures using domain ids across linked servers, but sql logins with the exact permissions work fine. ?????
I've successfully created a Linked Server that connects a local DB Engine with another DB Engine through an ip over an extranet. I am able to run simple Select statement queries on the Local DB Engine and get results from the linked server. However when attempting to perform more complex queries that join tables from the linked server with tables from the local DB server, I get the following error message after several minutes of execution:
OLE DB provider "SQLNCLI11" for linked server "<ip of Linked Server>" returned message "Protocol error in TDS stream". OLE DB provider "SQLNCLI11" for linked server "<ip of Linked Server>" returned message "Communication link failure".
Msg -1, Level 16, State 1, Line 0
Session Provider: Physical connection is not usable [xFFFFFFFF].
OLE DB provider "SQLNCLI11" for linked server "<ip of Linked Server>" returned message "Communication link failure".
Msg -1, Level 16, State 1, Line 0
Session Provider: Physical connection is not usable [xFFFFFFFF].
OLE DB provider "SQLNCLI11" for linked server "<ip of Linked Server>" returned message "Communication link failure".
Msg 10054, Level 16, State 1, Line 0
TCP Provider: An existing connection was forcibly closed by the remote host.
How I can resolve it. I've read on Distributed Transactions but I understand that it only applies to manipulation statements?
Both are SQL servers. Linked Server is SQL2008R2 if not mistaken. Local DB Engine is SQL2014.
I have done the following and a domain user would not access report created a login to the SQL server to the user (this SQL Server is where data source DB is)went to site setting in Report Manager and made this use a system userright clicked on report folder and made this user in the browser roleeven checked that in the report in question, the user is already in the browser role Still the user would not access the report! "User .......... does not have required permission" is the error message I am getting.Â
I am having a main report having two subreports, say M1,S1 and S2 respectively.
The issue is S2 normally tend to go beyond one page, for all pages except first page of the of the subreport I am getting the page header and footer blank,
Actually this is not loading the ReportItems that are used in main report but it shows text boxes containing strings for eg . "My Name" and date functions eg Today()
is it possible to have a kind of dynamic subreport in a main report.
Let me illustrate this with an example:
Next to my table i would like to have a window (subreport) that changes content whenever i click on a different value inside my table. In the subreport i would like to display detail information on specific cells in my table.
The report that I must create is related to the production order. Conceptually it can be seen as a tree. Where the root of the tree are the information Header of the production order. The principals children of the Root are the Operations and the Requirements to produce such order. For every Operation they are printed the Plants that are used and the Alternative Resources to effect the production.
There is a method to create a multilevel report? I think that is not for nothing logical to create a single table containing many heterogenous fields because it would have to repeat already numerous information at the changing of a field. I have created one datatable for every entity and I have tried to use subreport control, but evidently mistake in something. In order to obtain the wanted result (for example to print the Order production Head information if the report jump at new page) I have tried to combine the use of List control, Table control and Subreport control in file rdlc, but I have not found the just combination. Someone of you has already had to crare a multilevel report? Is possible to create a sub-subreport structure?
I have do that in VB.NET with ReportViewer local mode. I have posted the topic in this section because the problem of designe report is the same with local mode and remote mode.
What we've found is that when you have two reports where one navigates to the other, if you click on the second page of the second report, it takes you to the second page of the original report. If you navigate over to the subreport again and click for the second page, it works appropriately. This is definitely a no-go for production code and this may delay our ship date because I would think this is definitely undesirable.
Conditions:
ASP.NET Report Viewer using Remote Reports Report that links to another report Both reports return more than one page Reporting Services installed Steps to Reproduce:
Download the source code here.
Follow the directions (near the bottom of the post) to get the project set up.
Run it and click on a link in the first report to go to the second report.
Click the arrow for page 2 of the second report.
Notice how it takes you back to page 2 of the first report (this doesn't happen when you are in preview mode in the Reporting Services project and I don't believe it does this in a smart client application).
Click on a link in the first report to go back to the second report.
Click the arrow for page 2.
Notice how it takes you to page 2 of the second report.
Here is a link with source code and a more detailed explanation: http://geekswithblogs.net/robz/archive/2007/11/21/Reporting-Services-2005-BUG-Report-Linking-and-Paging---ASP.NET.aspx
So what I am looking for is both a workaround for now and if this is determined to be a bug, to be fixed in the next service pack.
I was wondering if anyone knew how to take a value from a subreport and compare it to a value iwthin the main report. We are trying to see if the value in the subreport is greater than the value returned in the main report. We want to make the value test red if it is greater than. I know how to compare these values if they were in the same report, but when it comes to subreports I am lost. Any ideas? Thanks in advance.
I have 2 reports where 1 is a subreport and the other one is a main report. Can i change or refer to a control(item) in the main report depending on the value of an item in the subreport, when the subreport is being run?
Is there anyway that i can access subreport field in main report? I just want it to be displayed. Thats it. I can not put subreport field in main report bcz it is based on the parameter passed by main report.
Here's my problem. I have a subreport that shows data and labels if data is returned. However, if no data is returned, the subreport doesn't show at all. I have a message on the subreport I would like to show if no data is returned, but the subreport won't show at all. Any ideas??
SUBREPORT (License info to the right) SHOULD PRINT TO RIGHT OF ADDRESS INFORMATION ON LEFT. LIKE THIS...
Name ABC-12345 Address line 1 DEF-12345 Address line 2 GH1-12345 City, State Zipcode
The data is from one table and looks like this. Both the main report and subreport use a shared data souce.
Name Address line 1 City State Zipcode License ------------- ------------------- ------------- --------- ---------- --------- Joe Schmoe 123 Maple Street Clearwater Florida 33777 ABC-12345 Joe Schmoe 123 Maple Street Clearwater Florida 33777 DEF-12345 Joe Schmoe 123 Maple Street Clearwater Florida 33777 GHI-12345
All lines are header lines. Subreport has been placed in top header line. IT IS PRINTING SIMILAR TO THIS BUT SHOULD PRINT AS FIRST STATED ABOVE...
Name ABC-12345 DEF-12345 GH1-12345 Address line 1 Address line 2 City, State Zipcode
ISSUE: I would like the subreport to PRINT ALONG WITH the address information to its left. In Crystal Report a subreport could "Underlay Following Sections" - a wonderful feature Microsoft maybe should have copied. Is there a way to duplicate "underlay" behavior in SQL Reporting ? Thanks.
UPDATE: Coworker found workaround. Can concatenate Name, Adress line 1, Address line 2, City, State and Zipcode into one field. Would still like to know a more straightforward way.
This is the part that I need help. I need to use an original value from the main report and a "return" value from the subreport. Main Report (Footer) Sum(FinalPayment) + SubReport.Sum(PaymentAdances)
Is it possible to pass a return value back to the main report from a subreport?
I have two subreports on one master report who's parameters @ReportDate would be set to the same date each time the report is run. When i run the master report i get an error for each report that tells me that one or more parameters required to run the report have not been specified. How do i pass the parameter i want to use in both reports from the master report through to the subreports.
I need to convert a Crystal report that contains three subreports. Each of these subreports uses a different stored procedure to obtain data. The main report uses data from these subreports to calculate averages in the footer etc.
How do i get the data contained in these subreports so i can use it in my main report?? Thanks in advance
