First of all, please let me prefix this by saying AAARRRRRGGGGGHH!!!
Troubleshooting an SSIS package is not even close to easy. The error messages are incredibly cryptic and are anything but useful. It is absurd that for most of the errors that I get, I find myself putting the error codes into Google to find out what they mean and how to address them. Since there is indeed an known exception, why not include a "descriptive" description of the error?
Okay, enough with the venting. Sorry about that...
What I really came here to ask is this, what in the world does this error message REALLY mean? I have found nothing useful on the Internet so far. The resulting forums and blogs with the error code do not apply to what I am doing.
Error: The attempt to send a row to SQL Server failed with error code 0x80004005.
It reminds me of the "opearation was successful the patient died" scenario.
Compare this to the SSIS Error message:
The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
I am trying to create a Union view with the following query:
SELECT TxType, AccNo, Stream FROM dbo.vw7_Existing_Member_History UNION SELECT TxType, AccNo, Stream FROM dbo.vw8_Deleted_Member_History
Here TxType is a short int, AccNo a nvarchar and stream is also nvarchar.
Stream containd values sch as "MCA", "MBA", "B.Ed." etc....
When I try to execute this query I get the following error: Error Message: Conversion failed when converting the nvarchar value 'B.Ed.' to data type int.
Removing Stream from both clauses of the query leads to uccessful execution. As I said, Stream is nvarchar, and nowhere am I trying to convert it into an int!!!!
hi all, I am developing an application in C# which creates SSIS package programatically.These packages perform various activities like transfering data from one server to another,extract data from table,transfering data from sql to msaccess etc.Here I am using the following code to get the description of the SSIS errorcode.
For example if the error code is 0xC0204018,the application shows its equivalent description as "The "%1!s!" has a precision that is not valid. The precision must be between %2!ld! and %3!ld! "
But the actual error message is "The Output column "fund" has a precision that is not valid. The precision must be between 1 and 18"
My question is how to show more descriptive error message..like how to replace "%1!s!" to the actual field.
This package which is a child package has been running successfully for quite some time now. All of a sudden we are getting these intermittant error messages. Does anyone have any ideas what to do or check for?
thanks
===========================
Error portion
Error: 0xC0047012 at CF-DFT Oracle Sales Fact, DTS.Pipeline: A buffer failed while allocating 100483760 bytes.
Error: 0xC02020C4 at CF-DFT Oracle Sales Fact, order line id [1]: The attempt to add a row to the Data Flow task buffer failed with error code 0x8007000E.
Error: 0xC0047011 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The system reports 30 percent memory load. There are 8587960320 bytes of physical memory with 5972680704 bytes free. There are 2147352576 bytes of virtual memory with 1324290048 bytes free. The paging file has 12673945600 bytes with 10005012480 bytes free.
Error: 0xC0047038 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The PrimeOutput method on component "order line id" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047056 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The Data Flow task failed to create a buffer to call PrimeOutput for output "Union All" (13359) on component "Union All Output 1" (13361). This error usually occurs due to an out-of-memory condition.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "SourceThread1" has exited with error code 0xC0047038.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread2" has exited with error code 0x8007000E.
Error: 0xC0047039 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread3" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047039 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread3" has exited with error code 0xC0047039.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread1" has exited with error code 0xC0047039.
Error: 0xC0047039 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0047039.
Information: 0x40016041 at SRW_ORACLE_SALES_FTBL: The package is attempting to configure from the XML file "D:SSISconfigurationCONFIG-STAGE1.dtsConfig".
Information: 0x40016040 at SRW_ORACLE_SALES_FTBL: The package is attempting to configure from SQL Server using the configuration string ""MSSQL-CONFIG";"[dbo].[SSIS_Configurations]";"System Configuration Settings";".
Information: 0x40016040 at SRW_ORACLE_SALES_FTBL: The package is attempting to configure from SQL Server using the configuration string ""MSSQL-CONFIG";"[dbo].[SRW_SSIS_Configurations]";"SRW Main Configurations";".
Information: 0x4004300A at CF-DFT Oracle Sales Fact, DTS.Pipeline: Validation phase is beginning.
Warning: 0x802092A7 at CF-DFT Oracle Sales Fact, TEMP OUTPUT [998]: Truncation may occur due to inserting data from data flow column "IC_ORDER" with a length of 240 to database column "IC_ORDER" with a length of 1.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "SERIAL_NUMBER" (2680) on output "Sort Output" (2453) and component "Sort 1" (2451) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "ORG_ID" (13377) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "CUST_TRX_TYPE_ID" (13428) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "Data Conversion 1.Copy of CUST_TRX_TYPE_ID" (13443) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "GL_ID_REV" (13449) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "Copy of GL_ID_REV" (13458) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Information: 0x4004300A at CF-DFT Oracle Sales Fact, DTS.Pipeline: Validation phase is beginning.
Warning: 0x802092A7 at CF-DFT Oracle Sales Fact, TEMP OUTPUT [998]: Truncation may occur due to inserting data from data flow column "IC_ORDER" with a length of 240 to database column "IC_ORDER" with a length of 1.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "SERIAL_NUMBER" (2680) on output "Sort Output" (2453) and component "Sort 1" (2451) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "ORG_ID" (13377) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "CUST_TRX_TYPE_ID" (13428) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "Data Conversion 1.Copy of CUST_TRX_TYPE_ID" (13443) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "GL_ID_REV" (13449) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "Copy of GL_ID_REV" (13458) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Information: 0x4004300A at CF-DFT Oracle Sales Fact, DTS.Pipeline: Validation phase is beginning.
Warning: 0x802092A7 at CF-DFT Oracle Sales Fact, TEMP OUTPUT [998]: Truncation may occur due to inserting data from data flow column "IC_ORDER" with a length of 240 to database column "IC_ORDER" with a length of 1.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "SERIAL_NUMBER" (2680) on output "Sort Output" (2453) and component "Sort 1" (2451) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "ORG_ID" (13377) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "CUST_TRX_TYPE_ID" (13428) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "Data Conversion 1.Copy of CUST_TRX_TYPE_ID" (13443) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "GL_ID_REV" (13449) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "Copy of GL_ID_REV" (13458) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Information: 0x40043006 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x400490F4 at CF-DFT Oracle Sales Fact, REV GL SEGS [307]: component "REV GL SEGS" (307) has cached 780 rows.
Information: 0x400490F4 at CF-DFT Oracle Sales Fact, get oper unit [813]: component "get oper unit" (813) has cached 12 rows.
Warning: 0x802090E4 at CF-DFT Oracle Sales Fact, get oper unit [813]: The Lookup transformation encountered duplicate reference key values when caching reference data. The Lookup transformation found duplicate key values when caching metadata in PreExecute. This error occurs in Full Cache mode only. Either remove the duplicate key values, or change the cache mode to PARTIAL or NO_CACHE.
Information: 0x400490F4 at CF-DFT Oracle Sales Fact, get header txn type for IC flag [13685]: component "get header txn type for IC flag" (13685) has cached 768 rows.
Information: 0x4004300C at CF-DFT Oracle Sales Fact, DTS.Pipeline: Execute phase is beginning.
Information: 0x4004800D at CF-DFT Oracle Sales Fact, DTS.Pipeline: The buffer manager failed a memory allocation call for 100484768 bytes, but was unable to swap out any buffers to relieve memory pressure. 83 buffers were considered and 83 were locked. Either not enough memory is available to the pipeline because not enough are installed, other processes were using it, or too many buffers are locked.
Error: 0xC0047012 at CF-DFT Oracle Sales Fact, DTS.Pipeline: A buffer failed while allocating 100484768 bytes.
Error: 0xC0047011 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The system reports 31 percent memory load. There are 8587960320 bytes of physical memory with 5869387776 bytes free. There are 2147352576 bytes of virtual memory with 1223802880 bytes free. The paging file has 12673945600 bytes with 9901600768 bytes free.
Information: 0x4004800D at CF-DFT Oracle Sales Fact, DTS.Pipeline: The buffer manager failed a memory allocation call for 100483760 bytes, but was unable to swap out any buffers to relieve memory pressure. 162 buffers were considered and 162 were locked. Either not enough memory is available to the pipeline because not enough are installed, other processes were using it, or too many buffers are locked.
Error: 0xC0047012 at CF-DFT Oracle Sales Fact, DTS.Pipeline: A buffer failed while allocating 100483760 bytes.
Error: 0xC02020C4 at CF-DFT Oracle Sales Fact, order line id [1]: The attempt to add a row to the Data Flow task buffer failed with error code 0x8007000E.
Error: 0xC0047011 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The system reports 30 percent memory load. There are 8587960320 bytes of physical memory with 5972680704 bytes free. There are 2147352576 bytes of virtual memory with 1324290048 bytes free. The paging file has 12673945600 bytes with 10005012480 bytes free.
Error: 0xC0047038 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The PrimeOutput method on component "order line id" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047056 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The Data Flow task failed to create a buffer to call PrimeOutput for output "Union All" (13359) on component "Union All Output 1" (13361). This error usually occurs due to an out-of-memory condition.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "SourceThread1" has exited with error code 0xC0047038.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread2" has exited with error code 0x8007000E.
Error: 0xC0047039 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread3" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047039 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread3" has exited with error code 0xC0047039.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread1" has exited with error code 0xC0047039.
Error: 0xC0047039 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0047039.
Information: 0x40043008 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x402090DF at CF-DFT Oracle Sales Fact, TEMP OUTPUT [998]: The final commit for the data insertion has started.
Information: 0x402090E0 at CF-DFT Oracle Sales Fact, TEMP OUTPUT [998]: The final commit for the data insertion has ended.
Information: 0x40043009 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at CF-DFT Oracle Sales Fact, DTS.Pipeline: "component "TEMP OUTPUT" (998)" wrote 0 rows.
Task failed: CF-DFT Oracle Sales Fact
Warning: 0x80019002 at SRW_ORACLE_SALES_FTBL: The Execution method succeeded, but the number of errors raised (15) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Task failed: CF-EPGT SRW_ORACLE_SALES_FTBL
Warning: 0x80019002 at CF-SQC Facts: The Execution method succeeded, but the number of errors raised (15) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Warning: 0x80019002 at SRW_MAIN: The Execution method succeeded, but the number of errors raised (15) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
My table uses the identity of +1, and starts at 1 for a primary key.
These are ticket numbers, and each time a new ticket is created a number is taken, currently at around 45.
When a ticket is opened and cancelled I decide to just set a status column for that ticket number to cancelled. Therefor a ticket remains in the database that offers no use (we don't want cancelled tickets cloggin.)
using an SSIS package to delete is pretty simple, just Delete from Table Where Status = 0 (or cancelled).
Then I will have some numebrs from the past I would like to recover.
For example, my ticketnums table could read that I am using tickets 1, 4, 7, 8, 9, 11.. etc
Tickets 2,3,5,6,10 are cancelled, can I recover these ticket numebrs?
I know that the query governor works off of estimated query plans, but the estimation is usually so far off from reality that it might as be generating a random number to determine whether a query should run.
Right now I have query governor set at 300. I've been able to run queries that take more than 10 minutes without any complaint from query governor.
What's really annoying though, is that it has also blocked queries that take less than a second to run. It blocked a query for having an estimated executing time of 338 seconds. When I set the limit up to 400, the query ran virtually instantly.
Is this just how query governor is suppose to work? Is there any way to make it work better?
I read a lot of posts in this forum, but none of them provide a solution.
Probably it is related to SP2 as many report, I have SP2 as well...
A funny situation: I have a report parameter @date, datatype datetime, so I can use the datepicker control.
But, even when not using this @date parameter in my dataset, I still get the error:
The value provided for the report parameter 'date' is not valid for its type. (rsReportParameterTypeMismatch)
Of course it has to do with regional settings and languages etc... But at my international client's site, workstations are in any regional setting and servers are in en-US, nothing I can do about that.
Come'on Microsoft, don't tell us this datePicker is only for the US market?
I am running SSIS package using command line. However I want to suppress the messages that come and I want to display my own messages. How can I do that?
For eg: I am using File System task to transfer a file from source to destination. How will i tell this to the user who is seeing this executed at the command line?
Hi, I am designing a simple SSIS package that tests database connectivity. To use the same connection for each database, I am changing the "InitialCatalog" property of the Connection Manager object to test each database in a server.
When the connection fails, I can capture a generic error message from the exception in a Try...Catch block, but it doesn't tell me why a connection attempt failed. I have tried Package Logging as well and that was actually less helpful.
I would have stopped there except the Output Window and Progress/Execution Results tabs BOTH show that the reason for the error was a login failure. I am trying to capture the message that appears in either of these windows as they are the most helpful.
Has anyone been able to programmatically capture these messages?
DB-Library Error 10007: General SQL Server error: Check messages fromthe SQLServer.CREATE PROCEDURE [dbo].[spu_Import_Export_Image](@srvr varchar(50),@db varchar(50),@usr varchar(15),@pwd varchar(50),@tbl varchar(50),@col varchar(50),@mod varchar(1),@imgpath1 varchar(1000),@pk varchar(50))ASBEGINdeclare @path varchar(50)declare @whr varchar(200)declare @fil varchar(100)declare @cmd varchar(1000)declare @imgpath varchar(800)declare @ext varchar(5)--declare @pk varchar(50)declare @KeyValue varchar(8000)declare @image varchar(50)--declare @imgpath1 varchar(1000)declare @imgpath2 varchar(1000)declare @sellist varchar(2000)set @path = 'c: extCopy.exe'select @sellist = 'DECLARE curKey CURSOR FOR SELECT ' + @pk +' FROM '+ @tbl + ' ORDER BY ' + @pkexec (@sellist)OPEN curKeyFETCH NEXT FROM curKey INTO @KeyValueWHILE (@@fetch_status = 0)BEGINset @whr = '"where '+ @pk +' = "' + @KeyValueset @fil = @imgpath1 + '' + @KeyValue --+ @extset @cmd = @path + ' /S ' + @srvr + ' /D ' + @db + ' /U ' + @usr+ ' /P ' + @pwd+ ' /T ' + @tbl + ' /C ' + @col + ' /W ' + @whr + '/F ' + @fil+ ' /' + @modexec Master..xp_cmdShell @cmdFETCH NEXT FROM curKey INTO @KeyValueENDCLOSE curKeyDEALLOCATE curKeyENDGOAbove srcipt runs fine with image data type in one table but when irun for some other table it gives me Error MessageTEXTCOPY Version 1.0DB-Library version 8.00.194SQL Server 'WSQL01' Message 170: Line 1: Incorrect syntax near '99'.(Concerning line 1)DB-Library Error 10007: General SQL Server error: Check messages fromthe SQLServer.ERROR: Could not use database 'test1'NULL-----------Aslo it only runs on server console if i run it from workstation uingsame files and tables it gives me an error again. Can anybody help meand reply me at Join Bytes! asap.thnx,dharmesh
I just started playing with sqlagent and am finding that viewing a specific message from an ssis step is cumbersome when other entries are also in the log. Exporting seems only able to export all history entries. Viewing right in the log viewer leads to a series of boundary expansions and right scrolls that dont seem convenient for quick identification of a problem in a medium sized ssis message. Right clicking on the message in the viewer seems like it is preparing the message for possible copy but it seems to end there. I'm already familiar with the different levels of verbosity available in the command line. Dont see anything useful on the web.
Is there a user friendly way to copy the contents of a specific message for perhaps pasting to notepad , so that problem identification is facilitated? Is there a not so user friendly way available, one taht doest involve 1st exporting the entire log?
I am writing a tracking system. There is a table in the Sql Server 2000 database that contains a column for the user's ntid, the page they visited, the date of the last visit, a column each to track hits for the current year and a previous year column (basically for archiveing and reporting purposes), and 12 columns for hits per month (obviously, one per column). To record a hit, my unit determined we would only track one hit per day, so basically, there are 3 possible outcomes I needed to account for : 1) A user had never hit the page before, so I need to record the user's ID, the page they hit for the first time (since it won't exist yet), increment the year counter for that user on that page, and then determine what month column counter should be incremented as well. 2) A user had hit the page before, but not on this same day, so I need to update the row for that user on that page, changing the last visit field to reflect the current date, and icnrementing the appropriate counters. 3) A user had hit the page already on the same day, so basically, nothing should be changed whatsoever. No action should be taken. I wrote a stored procedure to attempt to accomplish that logic, and though it's probably not very pretty, I was surprised at how few errors I got on my first Syntax check. Here's the stored procedure : CREATE PROCEDURE sp_hitMe@ntid varchar(10),@page varchar(50),@thisHit datetimeASSET NOCOUNT ON DECLARE @tempDate datetimeDECLARE @yearCount intDECLARE @monthCount intDECLARE @inMonth varchar(20)DECLARE @monthColumn varchar(10)SET @inMonth = DATENAME(mm, @thisHit)SET @monthColumn = CASE WHEN @inMonth = 'January' THEN 'hitsInJan' WHEN @inMonth = 'February' THEN 'hitsInFeb' WHEN @inMonth = 'March' THEN 'hitsInMar' WHEN @inMonth = 'April' THEN 'hitsInApr' WHEN @inMonth = 'May' THEN 'hitsInMay' WHEN @inMonth = 'June' THEN 'hitsInJun' WHEN @inMonth = 'July' THEN 'hitsInJul' WHEN @inMonth = 'August' THEN 'hitsInAug' WHEN @inMonth = 'September' THEN 'hitsInSep' WHEN @inMonth = 'October' THEN 'hitsInOct' WHEN @inMonth = 'November' THEN 'hitsInNov' WHEN @inMonth = 'December' THEN 'hitsInDec' END DECLARE @insString varchar(500)DECLARE @updString varchar(500)SET @insString = 'INSERT INTO tblTracking (ntid, page, lastVisit, hitsThisYear, ' + @monthColumn + ') VALUES (' + @ntid + ', ' + @page + ', ' + @thisHit + ', 1, 1)' if exists(select * from tblTracking where ntid = @ntid and @page = page) begin if exists(select * from tblTracking where lastVisit = @thisHit) begin -- DO NOTHING! end else begin DECLARE @theColumn varchar (100) SET @theColumn = 'SELECT ' + @monthColumn + ' FROM tblTracking WHERE ntid = @ntid AND @page = page' SET @yearCount = (SELECT hitsThisYear FROM tblTracking WHERE ntid = @ntid AND @page = page) + 1 SET @monthCount = (Exec @theColumn) SET @monthCount = @monthCount + 1 SET @updString = 'UPDATE tblTracking SET lastVisit = ' + @thisHit + ', hitsThisYear = ' + @yearCount + ', ' + @monthColumn + ' = ' + @monthCount + ' WHERE ntid = @ntid AND @page = page' Exec @updString end endelse begin Exec @insString endGO And to my surprise, the only 3 errors I got were : Server: Msg 156, Level 15, State 1, Procedure sp_hitMe, Line 39Incorrect syntax near the keyword 'end'.Server: Msg 156, Level 15, State 1, Procedure sp_hitMe, Line 45Incorrect syntax near the keyword 'Exec'.Server: Msg 156, Level 15, State 1, Procedure sp_hitMe, Line 50Incorrect syntax near the keyword 'end'. However, these are of course so vague as to be useless to me. What's wrong with the procedure? What have I missed?
Hello,I'd like to know if I use DTS. If I use it immediately, I can see the errorin the dialog box, instead, if I use it with scheduling, where Can I checkthe error ?ThanksSaimon(Florence)
Greetings I'm learning SSIS and BIDS. I have extreme difficulty making sense of the error messages that come out.
First of all, what do the numbers mean? Each column, error, etc. is assigned a number that obviously means something yet I cannot relate them to anything. For example: The output column Name (713) on output Test (15) and Component (15) -- My table doesn't have 713 columns in it...
Then there are the error codes that obviously contain something useful. For example:
DTS Error: Microsoft.SqlServer.Dts.Runtime.TaskHost/QueueFuzzyName [33]SIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "OLE DB Destination Input" (46)" failed because error code 0xC020907D occurred, and the error row disposition on "input "OLE DB Destination Input" (46)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
Where would I look up: DTS_E_INDUCEDTRANSFORMFAILUREONERROR and 0xC020907D? I understand that it tried to convert a value in something numbered 46 (no idea what that is) and the conversion failed. But that's it. How do I transmogrify 46 to something I can look at. I'm a little fuzzy on what a Destination Input is. Isn't an output a destination?
Or this one:
Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors" Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
I have absolutely no idea what this means except that many things happened, one of them failed, I have an error of some sort and it's error code is 0x80040E21. It must be important, it's in there twice, but what does it mean?
I'm thinking that in the help somewhere all these error messages are listed and I can look them up, but I can't seem to find it anywhere. Am I supposed to be converting them to decimal first?
Any advice from you experts would be much appreciated.
I'm using SqlBulkCopy. Does anyone know how I can output what row (its column names) are throwing a duplicate primary key message when I bulkCopy.WriteToServer(datatable1)?Thanks
Have this dynamic sql statement that I'm working on. It works fine outside the execute (running the query by iteself) and prints fine but when I execute it, I get errors. Spacing is good. Here is the SQL statement. set @sql = 'insert into #participantInfo (strfirstname,strlastname,strindividualfk,strusername,dtelastlogin,blninactive,fk_intrightid,imgPhoto, stre_mail,strmiddleinitial,straddress1,straddress2,strcity,fk_intlocationid,strpostalcode,strhomephone,strbusinessphone,strmiscinfo1, strmiscinfo2,strsecretquestion,dteDateOfBirth,intgender,strsecretanswer) select p.strfirstname,p.strlastname,p.strindividualfk,l.strusername,l.dtelastlogin,p.blninactive,r.fk_intrightid,p.imgPhoto, p.stre_mail,p.strmiddleinitial,p.straddress1,p.straddress2,p.strcity,p.fk_intlocationid,p.strpostalcode,p.strhomephone,p.strbusinessphone, p.strmiscinfo1,p.strmiscinfo2,l.strsecretquestion,p.dteDateOfBirth,p.intgender,l.strsecretanswer from tblparticipants p inner join tblparticipantrights r on p.strindividualfk = r.strindividualfk inner join tblparticipantlogin l on p.strindividualfk = l.strindividualfk where p.fk_strsubgroupid = ''' + @strsubgroupid + '''' exec (@sql) Error messages are: Server: Msg 208, Level 16, State 1, Line 1Invalid object name 'tblparticipants'.Server: Msg 208, Level 16, State 1, Line 1Invalid object name 'tblparticipantrights'.Server: Msg 208, Level 16, State 1, Line 1Invalid object name 'tblparticipantlogin'. Anyone see what may be the cause? thanks ^_^
So far I have not been able to figure out how to get more info regarding the sql server errors. For example, I get this error from sql server query analyzer (this just an example):
----------- Server: Msg 128, Level 15, State 1, Line 5 The name 'does' is not permitted in this context. Only constants, expressions, or variables allowed here. Column names are not permitted. -----------
Is there a way to find more information regarding this error, or like Oracle has MeataLink, where you can search, if someone else already got this error and how it got resolved?
Or how you folks go about resolving errors you get? Is it based on trail and error, or experience (like already encountered this type before) etc.?
I was wondering if anybody knows where to get a complete list of SQL Server error messages. I am writing a stored procedure that scans SQL Server Logs for errors and if there are errors in the logs, I get paged.
How can I avoid certain messages from SQL Server being recorded into the Event viewer ? For example, every time I truncate the transaction log with 'Backup log with truncate_only', It is being recorded into the Event viewer as an Error. But, I know that it is not an error. How can I avoid this ?
I have a SS2K5 stored procedure that executes 2 others stored procedures sp_zero1 and sp_zero2 sp_zero1 and sp_zero2 do the same thing ... raises an Divide by zero error I need to (print / select into a database) both error messages using just one try catch block instead of 2 blocks like in the next example:
-- THIS IS THE WORKING CODE THAT I DONT WANT BEGIN TRY exec sp_zero1 END TRY BEGIN CATCH PRINT ERROR_MESSAGE() PRINT ERROR_PROCEDURE() END CATCH BEGIN TRY exec sp_zero2 END TRY BEGIN CATCH print ERROR_MESSAGE() print ERROR_PROCEDURE() END CATCH
if I try the next code
--THIS IS THE NON WORKING CODE BEGIN TRY exec sp_zero1 exec sp_zero2 END TRY BEGIN CATCH print ERROR_MESSAGE() print ERROR_PROCEDURE() END CATCH
only the first error message is printed and the execution is stopped
This is a generic example ... in reality I have a stored procedure that executes tens and hundreds of other stored procedures ... so thats the reason I need just one block of try catch instead of hundreds of blocks
My understanding is that in a stored procedure (or any code for thatmatter) if an error occurs you can detect it by checking @@errorvariable and raise your own error with raiserror statement.The problem is that the original error is not suppressed. For exampleI received the following output from a stored procedure from the sameerror:Server: Msg 547, Level 16, State 1, Procedure spUpdateSecurityMaster,Line 49INSERT statement conflicted with COLUMN FOREIGN KEY constraint'FK_SM_mm_Exchange_Exchanges'. The conflict occurred in database'Trading', table 'Exchanges', column 'IsoCode'.Server: Msg 50000, Level 14, State 1, ProcedurespUpdateSecurityMaster, Line 57Unable to insert into "SM_mm_Exchange" tableThe statement has been terminated.So why should we bother to use raiseerror if the orginal error isgoing to be given to the client anyways? The end result is two errormessages.
Hi everybody,I need to trap error messages in my stored procedures and log them. I canuse @@ERROR global variable to get the error code and look it up insysmessages table to get the description. Then using xp_logevent I log theerror.The problem is this description needs to be formatted. For example if I tryto insert NULL into a column which is not nullable, I'll get error #515. Thedescription of error #515 in sysmessages is:Cannot insert the value NULL into column '%.*ls', table '%.*ls'; columndoes not allow nulls. %ls fails.Is there a way to get the formatted message? What is the best approach totrap errors, filter them, add some additional information to the message andsend it to server's event logger?TIA,Shervin
Hi everyone,How do I get the error message?I have a very long sproc that needs to be done in one transaction. Ihave an error happening somewhere in the middle, but with a low enoughseverity it doesn't terminate the procedure. To make sure I don'tmiss any errors, I am storing @@error after every statement:If @Error<=@@error Set @Error=@@errorthat way at the end I can say if @error<>0 rollback trans.How do I get the error message? I have the number, and what I getfrom sysmessages has the wildcards in it %d and so on.Also , I can't use Xact_Abort, the web user permissions don't allowit.Or better yet is there a better way to do this? Sql has@@total_errors - since the server was started, how about since thetransaction or the sproc was started.Thanks a tonPachydermitis
[OLE DB Destination [255]] Error: The "input "OLE DB Destination Input" (268)" failed because error code 0xC020907B occurred, and the error row disposition on "input "OLE DB Destination Input" (268)" specifies failure on error. An error occurred on the specified object of the specified component.
I've condensed the useful information in the statement down to the following:
"An error occured."
I'd like to also provide a plain english paraphrase.
An error occured somewhere to something. This means that something somewhere didn't work right. The cause of the thing not working right is an error of some sort. We'd like to provide you with the following piece of diagnostic information: we know that an error occured somewhere to something because the error row disposition tells us this. We hope that helps. Thank you, and have a nice day.
Now, could anyone translate this into Klingon? I think it would be easier to understand and just as useful.