Crystal Report Parameter Issue
Jun 14, 2007
Hello,
There is probably a really simple solution to this problem... but, here it is..
I am working on CR Designer v11 and have a report that uses a stored procedure. Originally, when the report was created, this stored procedure had one parameter. Since then, however, I have added an additional parameter to the SP in SQL. After doing so, I opened the report, in report designer, and manually added the new parameter to the parameter list. I then realized that I did not need to do this. The Verify Database function should auto populate the parameter list for me. So, I then deleted the parameter(that I had created manually) and performed the Verify Database. But now the parameter does not auto populate in the parameter list.
By deleting the parameter (that I had created manually), did I cause the designer to ignore this second parameter in the actual SP? How can I get the designer to auto populate the parameter list with this new parameter?
View 1 Replies
ADVERTISEMENT
May 28, 2007
i want to create bar chart dynamically. how to pass the x axis values and y axis values in crystal report in runtime.
View 1 Replies
View Related
Jul 20, 2005
I would like to pass an unique identifier (UserID) to a Crystal Reportfrom a SQL stored procedure. I found an article from Business Objectsabout this issue, but I couldn't get my head around it's hard codedexample.Does anyone have an example of this? Would I need to also create aparameter in my Crystal Report?Help appreciated.Steve*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies
View Related
Aug 10, 2007
I've created an app that connects to a SQLCE database. I need to create Crystal Reports that connect to the database. There is no ODBC driver for SQLCE. How can I do this?
Thanks,
Kathy
View 9 Replies
View Related
Jan 12, 2007
I am a Web developer. I am new to VB 6.0 and Crystal Report. I havejoined an organisation where there is an application running(developedin VB6 and crystal report 7). I have to modify one report. In twocolumns I have to make minor changes i.e put and = operator. I amencountering following problem:1. When I open the report using Seagate crystal report for rational /32 bit crystal Report Designer there are three columns which are goingout side the visible area and I am not able to scroll up to them. Iincreased the page margin (left / right) and made it to zero and zerobut still I am not able to see those columns. Please guide.2. Please suggest any good web site for learning Crystal Report 7Thanks n RegardsDeepak Sinha
View 2 Replies
View Related
Apr 26, 2002
Hi,
I am trying to run the crystal report from asp.
its says SQL Server connection failed. But i could connect SQL server using the same DSN. Any idea???
Set crp = Server.CreateObject("Crystal.CRPE.Application")
iReturn = crp.LogOnServer("p2sodbc.dll", "DSNNAME","USERID","PASSWORD")
Set oRep = crp.OpenReport("C:inetpubwwwrootpdftestest.rpt")
oRep.Preview
Set crp = nothing
Thanks
Ilango
View 1 Replies
View Related
Jan 12, 2004
Does Crystal Report 8.5 work OK with SQL Server 2K ?
Anyone encoutered problems for with this couple of programs ?
View 3 Replies
View Related
Sep 27, 2007
How can I convert a crystal report to a pdf format.ASP.net is not loaded in my machine.pls help me...
View 3 Replies
View Related
Feb 25, 2008
I have a report that feeds the data from SQL 2000 and its giving me this error:
Failed to retreive data from the database.
Details: ADO Error Code: 0x80004005
Source: Microsoft OLE DB Provider for SQL Server
Description: [DBNETLIB][ Connection Open (Connect ()).] SQL Server does not exist or access denied.
SQL State:08001
Native Error: 17 [Database Vendor Code: 17]
I test the database and its ok, we update both Crystal and SQL and nothing happend. We test communication from PC to server and everything looks OK. We check ODBC Settings and looks fine...
Thanks in advance
View 2 Replies
View Related
Mar 4, 2001
we have data base in ms access and reports in crystal reports 5 recently we converted our data base to sql sever 7
and reports to crystal reports 8. when i opend directly in cystal reports and given data base connecting through oledb
i am getting reports but from the application it is in vb6 the report window is poping up and latter a error msg saying un able to open sql server
when i checked up the connection it is ok help me
anil
View 2 Replies
View Related
Dec 8, 2005
I'm using Crystal 9 with SQL Server database. I have a report that was working fine for the first 8 months. As soon as I add another month, the report fails. I've tried different setting in my indexes with different variations of periods. The minute I have over 8 periods included, the report fails. No errors, just no data. I don't even have a clue where to look for possible answers on the Internet.
Can any one help or direct me to some resources??
Thanks,
Debbie
View 4 Replies
View Related
Mar 21, 2006
and if so does anyone know where I can find some code examples?thanks
View 1 Replies
View Related
Feb 14, 2008
HI,
I have a windows .net program that creates and displays crystal reports. I was able to download all
the .dlls a needed such as the CrystalDecisions, etc.., however, when i ran my program it tells methat I cannot run these .dlls outside of managed code. Where do I need to put these .dlls and how do I make my application work?
THanks
View 4 Replies
View Related
Oct 19, 2007
Hi all,
need help to convert Sum(a, b) i found in Crystal Report to SSRS.
a = the dataset that i want to subtotal
b = the group
thanks!
Addin
View 1 Replies
View Related
Apr 21, 2008
Is it possible to include a text/string as suffix(append to the end of textbox) to an report parameter prompt string ? Something like this
Enter Date: [ Textbox ] format:mm/dd/yyyy
Enter Age:[Textbox ] e.g 50
I need to include text like the one that I have highlighted in blue. Could someone help me out?
View 7 Replies
View Related
Mar 15, 2004
I'm working on a stored procedure to populate a Crystal report. My company insists that we put the report parameters in the stored procedure instead of in Crystal...so that the SQL server (rather than the desktop)does the work of restricting the data. Is there anything I can do on the SQL side(possibly User Defined Data Type) to get Crystal to prompt me for a date WITHOUT the time? I started with this:
CREATE proc uspReportData @BeginDate datetime, @EndDate datetime
When Crstal prompts me for the parameters, I can type the date or use the calendar to pick a date, but I AM FORCED to enter a time. I know I could choose to ignore the time in the stored procedure, but the users don't want to see the time section of the parameter. Apparently SQL doesn't have a plain "date" parameter without a time.
I've also considered this:
CREATE proc uspReportData @BeginDate char(10), @EndDate char(10)
However if I do it this way, I can't seem to find a way to make sure a valid date is entered when Crystal prompts the user for the dates.
If using char(10) turns out to be the best method, is there a way I can pre-populate the Crystal prompts like this:
@BeginDate = 1st day of the current month
@EndDate = the current system date
Crystal seems to allow hard coded default values, but I can't find a way to do calculated default values.
I'm open to suggestions.
Thanks,
Mike
View 10 Replies
View Related
Aug 7, 2007
I've tried to find this documented on the Internet and found Crystal Reports User's Guid online documentation (582 pages of it!) It looks like it will be helpful for my other questions, but what I'm trying to do right now is call a stored procedure from my crystal report. So in Field Explorer under Database Fields my stored procedure is there with the three columns it selects. How do I put these three columns on my report? I try dragging them to Section 3 details and they're there but when I preview the report all I get are the headers, not the records. Is there something else I need to do? It requires an input parameter which I am not getting prompted for - maybe that is my problem, without an input parameter it can't successfully run the stored procedure, so how do I make it prompt me?
Thanks for helping me with my first Crystal Report!
View 2 Replies
View Related
Jun 29, 2007
Hi guys
i am developing a Performance Management System for my organisation and reports are quite complex. so i thought to create a CLR stored procedure and then use this in Crystal Report.
The problem I am facing is that the CLR stored procedures I create using Visual Studio 2005 are not visible from Crystal Reports XI come with Visual Studio 2005. I can create stored procedures using standard transact sql and these are visible, but the CLR stored procedures are not.
I Simply create a CLR store procedure in Visual Basic and debug it. This CLR procedure then appeares under stored procedure node in SQL Server 2005.
I've noticed when I browse the stored procedures in my SQL Management Studio that the image of the stored procedure has a padlock shown in the icon, as if they are locked?
Do I have to explicitly enable a security attribute on CLR stored procedures to make them visible?
any help would be highly appretiated.
best regards
Ali
View 2 Replies
View Related
Apr 23, 2008
Can I create reports with Crystal Reports and Deploy them in SSRS?
Thanks in advance,
saied
View 1 Replies
View Related
May 20, 2015
In a report called ICD_PrivateHospital, I have designed to show output to two table from two store procedures. 1st store proc: usp_RPT_Private and 2nd store proc: usp_RPT_Private2.
I have created both the store procs and it is executing successfully. I also have designed the Crystal Report in Visual Studio 2008.
I have added both the store procs in the crystal report with no error. I only wants to show top 20 records. It is running successfully when I add the fields and parameters from the first store procedure. But when I add the 2nd store procedures fields into the report, duplication occurs for both the results in store proc 1 and store proc 2. How to solve this issue?
View 5 Replies
View Related
Jun 12, 2007
hey i m startint in reporting services 9 and i find it so interesting but kinda slow, which is faster reporting services 9 or crystal report 11?
best regards
Joseph
View 6 Replies
View Related
Sep 17, 2007
Converting Crystal Report formula to SSRS
I've got a formula written in Crystal Reports that I'm trying to re-do in SSRS 2005. I've just been using Crystal Reports for so long, I've got a mental road-block today.
Here is the formula in Crystal Reports:
IF {V_VIEW.FIELD1} IN ["AAA", "BBB", "CCC", "DDD",
"EEE", "FFF"]
THEN ({V_VIEW.FIELD2}&"*")
ELSE ({V_VIEW.FIELD2})
(It concatonates an asterisk to the end of FIELD2 if FIELD1 contains on of the values in the list.)
In SSRS I'd like to cause an entire row to be bold if FIELD1 contains one of the values in the list.
So in SSRS I'm putting an expression into the FontWeight properties of the TableRow and trying for something (which doesn't work yet) like:
=iif (Fields!FIELD1.Value IN ("AAA", "BBB", "CCC", "DDD", "EEE", "FFF"), "BOLD", "NORMAL")
(SSRS doesn't like the "IN" in the above statement.)
Can anyone offer a suggestion on how to write this for SSRS?
Thanks!
-ErikR
------UPDATE------
2007-SEPT-17
Ok. I found a workable solution. Does anyone have a better suggestion than the following? The below works but it seems it could be done more simply... Any suggestions?
=iif (Fields!FIELD1.Value = "AAA","Bold",
iif(Fields!FIELD1.Value = "BBB","Bold",
iif(Fields!FIELD1.Value = "CCC","Bold",
iif(Fields!FIELD1.Value = "DDD","Bold",
iif(Fields!FIELD1.Value = "EEE","Bold",
iif(Fields!FIELD1.Value = "FFF","Bold",
iif(Fields!FIELD1.Value = "GGG","Bold",
iif(Fields!FIELD1.Value = "HHH","Bold",
iif(Fields!FIELD1.Value = "III","Bold",
iif(Fields!FIELD1.Value = "JJJ","Bold",
iif(Fields!FIELD1.Value = "KKK","Bold",
iif(Fields!FIELD1.Value = "LLL","Bold",
iif(Fields!FIELD1.Value = "MMM","Bold",
iif(Fields!FIELD1.Value = "NNN","Bold",
iif(Fields!FIELD1.Value = "OOO","Bold",
iif(Fields!FIELD1.Value = "PPP","Bold",
"Normal"))))))))))))))))
View 2 Replies
View Related
Oct 11, 2005
Hi,
I am using SQL server 2000, Crystal Reports 8.5. I dont see any problem with accessing thro' VB Coding(ADODB).
Crystal Report connection thro ODBC also working fine.
But when i try to connect to database thro "More data sources" -> SQL server , i was thrown out with an error "Unable to connect to SQL server servernam"
I have uninstalled & Reinstalled both SQL server and Crystal Report. Still not working.
I have been struggling with this problem for quite a long time.
Can any one give me the solution for this ??
Regards
SRagghu
View 1 Replies
View Related
Apr 10, 2007
I am migrating my reports from crystal 8 to reporting services 2005 but before this my client wants answers of following question.Can anybody provide me answer or link related to mentioned question...
1 -Will there be any performance improvement when the same Report (considering big data) is being run with Sql-Server reporting services compared to the one with Crystal report engine?
2- Is it possible to make the labels which are part of Top Palette like €œ1 of 1€?, €œFind€?, €œNext€?, €œSelect a format€?, €˜Export€? according to the Account language?
3- Can both Versions of Reporting Tools (SQL-Reporting service and Crystal Report) run on the same machine?
4- What are the limitations of this Tools like whether there are any additional load on Database Server because of the involvement of Reporting services which are installed on DB Server.
5- Whether there are additional (to Crystal Report) types of Graph formats, Export file types available?
6- How is the licensing done for SQL-Server Report services?
Please provide me the answers ASAP.
View 4 Replies
View Related
Apr 2, 2008
hi there,
I have a crystal report that calls a stored procedure from SQL Server 2000. The only parameter I have is @A
the SP is:
--------------
CREATE PROCEDURE Final
@A INT
AS
Declare @SQL VARCHAR(2000)
SET @SQL = 'SELECT * FROM Schools where Areano = @A'
EXEC(@SQL)
GO
-------------
From the standard report creation wizard, i choose the data (SP). and select the SP, then i got window to enter a parameter values for @A, and i check ( Set to Null value), then press OK, the following error occured
Must Declare the variable @A
Please help me!
Best Regards
View 5 Replies
View Related
Jan 9, 2007
Request is to have a Requirement number from the requirement form generate a report in Reporting Services with the requirement number as a filter.
I can set up the parameter - how does the value get there? Should I be asking this question in the Visual C# group?
Thanks!
Terry B
View 1 Replies
View Related
May 6, 2015
i have recently ported an old asp.net web application using crystal reports 9 from windows server 2003 to windows server 2008 . the crystal reports smoothly at first but one of the reports stopped working when the admin changed his password now the report is showing error. Failed to open a rowset
View 3 Replies
View Related
Feb 24, 2015
My sa account can not see the tables in the db. but can connect to the server
View 2 Replies
View Related
Jul 30, 2015
I know select * into ##tmp1 should work but I get a database connection error.
View 9 Replies
View Related
Dec 18, 2007
We are using Crystal Report Services XI to generate reports from SQL Server 2000 database running on server within the same domain (LAN).
for some reason, SQL Server is rejecting the Credentials that is provided to CR Services, the user has right to that database. When We run the report manual, it works fine, but when we run Automatic on schedule , it fails.
The Authentication mode is set to Mixed.
The Startup Service accoutn is set to "This Account"
Any idea, why would this failure on User is encoutered.
Thanks,
View 1 Replies
View Related
Sep 19, 2006
I am receving this error: Failed to open the connection: [Database Vendor Code: 17 ], from .Net 2003/C# to Crystal Report XI with SQL Server 2000 has backend database.
Is there a security permission that has been overlooked?
Here is the code I use to access CR XI
ConnectionInfo connectionInfo = new ConnectionInfo();
TableLogOnInfo tableLogOnInfo;
Database DB;
'CrystalDecisions.CrystalReports.Engine.Table' table;
Tables tables;
//Log in
connectionInfo.ServerName = "ServerName";
connectionInfo.DatabaseName = "Database Namet";
connectionInfo.UserID = "userid";
connectionInfo.Password = "password";
//Get Table inf from report
DB = reportDocument..Database;
tables = DB.Tables;
//Looping through all the tables in CR and apply connection info
for(int i = 0; i < tables.Count; i++)
{
table = tables[ i ];
tableLogOnInfo = table.LogOnInfo;
tableLogOnInfo.ConnectionInfo = connectionInfo;
table.ApplyLogOnInfo(tableLogOnInfo);
}
CrystalReportViewer.ReportSource = ReportDocument.ReportSource;
CrystalReportViewer.Visible = true;
Any advise would be helpful.
Thank you
View 6 Replies
View Related
Feb 19, 2007
Hello,
since a couple of days I'm fighting with RS 2005 and the Stored Procedure.
I have to display the result of a parameterized query and I created a SP that based in the parameter does something:
SET ANSI_NULLS ON
SET QUOTED_IDENTIFIER ON
CREATE PROCEDURE [schema].[spCreateReportTest]
@Name nvarchar(20)= ''
AS
BEGIN
declare @slqSelectQuery nvarchar(MAX);
SET NOCOUNT ON
set @slqSelectQuery = N'SELECT field1,field2,field3 from table'
if (@Name <> '')
begin
set @slqSelectQuery = @slqSelectQuery + ' where field2=''' + @Name + ''''
end
EXEC sp_executesql @slqSelectQuery
end
Inside my business Intelligence Project I created:
-the shared data source with the connection String
- a data set :
CommandType = Stored Procedure
Query String = schema.spCreateReportTest
When I run the Query by mean of the "!" icon, the parameter is Prompted and based on the value I provide the proper result set is displayed.
Now I move to "Layout" and my undertanding is that I have to create a report Paramater which values is passed to the SP's parameter...
So inside"Layout" tab, I added the parameter: Name
allow blank value is checked and is non-queried
the problem is that when I move to Preview -> I set the value into the parameter field automatically created but when I click on "View Report" nothing has been generated!!
What is wrong? What I forgot??
Thankx for any help!
Marina B.
View 3 Replies
View Related
Jul 2, 2007
I had thought that this was possible but I can't seem to figure out the syntax. Essentially I have a report where one of the parameters is populated by a stored procedure.
Right now this is easily accomplished by using "exec <storedprocname>" as the query string for the report parameter. However I am not clear if it is possible to now incorporate User!UserID as parameter to the stored procedure. Is it? Thanks
View 1 Replies
View Related
