Cursor On A Temp Table
May 18, 2007
Hi all,
I have a task of rewriting all the old procs which were build on cursors, the management does want me to remove the cursor completely since that would mean rewriting everthing.. they want to use a temp table and run a cursor on the temp table. Since there are many cursors in each proc. Any suggestions on to go about it. I am against the use of cursor any everywhere in it , even if it calls for rewriting the whole db again.
I did some tests on running the old proc and the semi new proc , which runs a cursor from the temp table for the cursor query. And it even bad than the cursor only. what does this mean? Is it really a very bad idea to run cursor on a temp table?
Necessity is the mother of all inventions!
View 4 Replies
ADVERTISEMENT
Sep 16, 2004
I just want to know which one is more efficient cursor or temp table for looping through a record set?
I am basically looking for better performance and server utilization.
View 6 Replies
View Related
Aug 2, 2006
Hi Chaps,
I want to write a stored procedure in which I will update the all calendar week values (stored in a table). And to achieve this I will have to loop through all the records present in calendar table.
I am just wondering that should I use Cursor or TEMP table (caz of performance issues)?
As it will be part of data warehouse so all the processing will be carried out at SERVER ( means no client)
Can any one tell me that which would be the best solution ( Cursor or Temp table) in my case and WHY?
Note: I am using SQL Server 2005 standard edition
waiting for quick reply.
regards,
Anas
View 12 Replies
View Related
Mar 20, 2008
Following sp gives wrong result whats wrong with following cursor?
ALTER PROCEDURE [dbo].[spPMPT_GetProjectBenefitDetailsForAssess]
@ProjectBenefitID INT
AS
SET NOCOUNT ON
DECLARE @ErrorMsgID INT
DECLARE@ErrorMsg VARCHAR(200)
DECLARE @TEMP_BENEFIT
TABLE (ActualQuantity INT,
ExpectedQuantity INT,
ActualQulity VARCHAR(2000),
ExpectedQulity VARCHAR(2000) )
DECLARE @AssessBenefitID INT
DECLARE @ActualQuantity INT
DECLARE @ExpectedQuantity INT
DECLARE @ActualQuality VARCHAR(2000)
DECLARE @ExpectedQuality VARCHAR(2000)
DECLARE @AssessFlag CHAR
DECLARE CUR_BENEFIT CURSOR FOR
SELECT AssessBenefitID,ProjectBenefitID,AssessFlag FROM PMPT_AssessBenefit WHERE ProjectBenefitID=@ProjectBenefitID
OPEN CUR_BENEFIT
FETCH NEXT FROM CUR_BENEFIT INTO @AssessBenefitID,@ProjectBenefitID,@AssessFlag
WHILE @@FETCH_STATUS = 0
BEGIN
SELECT @ActualQuantity=Quantity FROM dbo.PMPT_AssessBenefit WHERE AssessFlag='A' AND AssessBenefitID=@AssessBenefitID AND ProjectBenefitID=@ProjectBenefitID
SELECT @ExpectedQuantity=Quantity FROM dbo.PMPT_AssessBenefit WHERE AssessFlag='E' AND AssessBenefitID=@AssessBenefitID AND ProjectBenefitID=@ProjectBenefitID
SELECT @ActualQuality=Quality FROM dbo.PMPT_AssessBenefit WHERE AssessFlag='A' AND AssessBenefitID=@AssessBenefitID AND ProjectBenefitID=@ProjectBenefitID
SELECT @ExpectedQuality=Quality FROM dbo.PMPT_AssessBenefit WHERE AssessFlag='E' AND AssessBenefitID=@AssessBenefitID AND ProjectBenefitID=@ProjectBenefitID
INSERT INTO @TEMP_BENEFIT (ActualQuantity ,
ExpectedQuantity ,
ActualQulity ,
ExpectedQulity )VALUES(@ActualQuantity,@ExpectedQuantity,@ActualQuality,@ExpectedQuality)
FETCH NEXT FROM CUR_BENEFIT INTO @AssessBenefitID,@ProjectBenefitID,@AssessFlag
END
CLOSE CUR_BENEFIT
DEALLOCATE CUR_BENEFIT
SELECT * FROM @TEMP_BENEFIT
View 3 Replies
View Related
Jun 4, 2015
I have a cte:
With cte as
(
Select distinct Incident_ID,
ACTUAL_SEVERITY ,
Policy
From
table)
There are 3 ACTUAL_SEVERITY value: 1-High, 2-Medium and 3-Low
I need the final result be like:
Policy High Medium/Low
How do I write the script with out using temp table or cursor?
View 6 Replies
View Related
Sep 5, 2007
Hi ,
I have two tables within a SQL database. The 1st table has an identified column and column which lists one of more email identifers for a second table,
e.g.
ID Email
-- ----------
1 AS1 AS11
2 AS2 AS3 AS4 AS5
3 AS6 AS7
The second table has a column which has an email identifier and another column which lists one email address for that particular identifier, e.g.
ID EmailAddress
--- ------------------
AS1 abcstu@emc.com
AS2 abcstu2@emc.com
AS3 abcstu3@emc.com
AS4 abcstu4@em.com
AS5 abcstu5@emc.com
AS6 abcstu6@emc.com
AS7 abcstu7@emc.com
AS11 abcstu8@emc.com
I need to create a stored procedure or function that:
1. Selects an Email from the first table, based on a valid ID,
2. Splits the Email field of the first table (using the space separator) so that there is an array of Emails and then,
3. Selects the relevant EmailAddress value from the second table, based on a valid Email stored in the array
Is there any way that this can be done directly within SQL Server using a stored procedure/function without having to use cursors?
Many Thanks,
probetatester@yahoo.com
View 7 Replies
View Related
Apr 9, 2014
Below are my temp tables
--DROP TABLE #Base_Resource, #Resource, #Resource_Trans;
SELECT data.*
INTO #Base_Resource
FROM (
SELECT '11A','Samsung' UNION ALL
[Code] ....
I want to loop through the data from #Base_Resource and do the follwing logic.
1. get the Resourcekey from #Base_Resource and insert into #Resource table
2. Get the SCOPE_IDENTITY(),value and insert into to
#Resource_Trans table's column(StringId,value)
I am able to do this using while loop. Is there any way to avoid the while loop to make this work?
View 2 Replies
View Related
Sep 25, 2007
part 1
Declare @SQLCMD varchar(5000)
DECLARE @DBNAME VARCHAR (5000)
DECLARE DBCur CURSOR FOR
SELECT U_OB_DB FROM [@OB_TB04_COMPDATA]
OPEN DBCur
FETCH NEXT FROM DBCur INTO @DBNAME
WHILE @@FETCH_STATUS = 0
BEGIN
SELECT @SQLCMD = 'SELECT T0.CARDCODE, T0.U_OB_TID AS TRANSID, T0.DOCNUM AS INV_NO, ' +
+ 'T0.DOCDATE AS INV_DATE, T0.DOCTOTAL AS INV_AMT, T0.U_OB_DONO AS DONO ' +
+ 'FROM ' + @DBNAME + '.dbo.OINV T0 WHERE T0.U_OB_TID IS NOT NULL'
EXEC(@SQLCMD)
PRINT @SQLCMD
FETCH NEXT FROM DBCur INTO @DBNAME
END
CLOSE DBCur
DEALLOCATE DBCur
Part 2
SELECT
T4.U_OB_PCOMP AS PARENTCOMP, T0.CARDCODE, T0.CARDNAME, ISNULL(T0.U_OB_TID,'') AS TRANSID, T0.DOCNUM AS SONO, T0.DOCDATE AS SODATE,
SUM(T1.QUANTITY) AS SOQTY, T0.DOCTOTAL - T0.TOTALEXPNS AS SO_AMT, T3.DOCNUM AS DONO, T3.DOCDATE AS DO_DATE,
SUM(T2.QUANTITY) AS DOQTY, T3.DOCTOTAL - T3.TOTALEXPNS AS DO_AMT
INTO #MAIN
FROM
ORDR T0
JOIN RDR1 T1 ON T0.DOCENTRY = T1.DOCENTRY
LEFT JOIN DLN1 T2 ON T1.DOCENTRY = T2.BASEENTRY AND T1.LINENUM = T2.BASELINE AND T2.BASETYPE = T0.OBJTYPE
LEFT JOIN ODLN T3 ON T2.DOCENTRY = T3.DOCENTRY
LEFT JOIN OCRD T4 ON T0.CARDCODE = T4.CARDCODE
WHERE ISNULL(T0.U_OB_TID,0) <> 0
GROUP BY T4.U_OB_PCOMP, T0.CARDCODE,T0.CARDNAME, T0.U_OB_TID, T0.DOCNUM, T0.DOCDATE, T3.DOCNUM, T3.DOCDATE, T0.DOCTOTAL, T3.DOCTOTAL, T3.TOTALEXPNS, T0.TOTALEXPNS
my question is,
how to join the part 1 n part 2?
is there posibility?
View 1 Replies
View Related
Jun 24, 1999
I think this is a very simple question, however, I don't know the
answer. What is the difference between a regular Temp table
and a Global Temp table? I need to create a temp table within
an sp that all users will use. I want the table recreated each
time someone accesses the sp, though, because some of the
same info may need to be inserted and I don't want any PK errors.
thanks!!
Toni Eibner
View 2 Replies
View Related
Feb 11, 2015
i am inserting something into the temp table even without creating it before. But this does not give any compilation error. Only when I want to execute the stored procedure I get the error message that there is an invalid temp table. Should this not result in a compilation error rather during the execution time.?
--create the procedure and insert into the temp table without creating it.
--no compilation error.
CREATE PROC testTemp
AS
BEGIN
INSERT INTO #tmp(dt)
SELECT GETDATE()
END
only on calling the proc does this give an execution error
View 3 Replies
View Related
Jul 19, 2012
I don't know if it's a local issue but I can't use temp table or table variable in a PP query (so not in a stored procedure).
Environment: W7 enterprise desktop 32 + Office 2012 32 + PowerPivot 2012 32
Simple example:
declare @tTable(col1 int)
insert into @tTable(col1) values (1)
select * from @tTable
Works perfectly in SQL Server Management Studio and the database connection is OK to as I may generate PP table using complex (or simple) queries without difficulty.
But when trying to get this same result in a PP table I get an error, idem when replacing table variable by a temporary table.
Message: OLE DB or ODBC error. .... The current operation was cancelled because another operation the the transaction failed.
View 11 Replies
View Related
Jul 20, 2005
Hi thereApplication : Access v2K/SQL 2KJest : Using sproc to append records into SQL tableJest sproc :1.Can have more than 1 record - so using ';' to separate each linefrom each other.2.Example of data'HARLEY.I',03004,'A000-AA00',2003-08-29,0,0,7.5,7.5,7.5,7.5,7.0,'Notes','General',1,2,3 ;'HARLEY.I',03004,'A000-AA00',2003-08-29,0,0,7.5,7.5,7.5,7.5,7.0,'Notes','General',1,2,3 ;3.Problem - gets to lineBEGIN TRAN <---------- skipsrestINSERT INTO timesheet.dbo.table14.Checked permissions for table + sproc - okWhat am I doing wrong ?Any comments most helpful......CREATE PROCEDURE [dbo].[procTimesheetInsert_Testing](@TimesheetDetails varchar(5000) = NULL,@RetCode int = NULL OUTPUT,@RetMsg varchar(100) = NULL OUTPUT,@TimesheetID int = NULL OUTPUT)WITH RECOMPILEASSET NOCOUNT ONDECLARE @SQLBase varchar(8000), @SQLBase1 varchar(8000)DECLARE @SQLComplete varchar(8000) ,@SQLComplete1 varchar(8000)DECLARE @TimesheetCount int, @TimesheetCount1 intDECLARE @TS_LastEdit smalldatetimeDECLARE @Last_Editby smalldatetimeDECLARE @User_Confirm bitDECLARE @User_Confirm_Date smalldatetimeDECLARE @DetailCount intDECLARE @Error int/* Validate input parameters. Assume success. */SELECT @RetCode = 1, @RetMsg = ''IF @TimesheetDetails IS NULLSELECT @RetCode = 0,@RetMsg = @RetMsg +'Timesheet line item(s) required.' + CHAR(13) + CHAR(10)/* Create a temp table parse out each Timesheet detail from inputparameter string,count number of detail records and create SQL statement toinsert detail records into the temp table. */CREATE TABLE #tmpTimesheetDetails(RE_Code varchar(50),PR_Code varchar(50),AC_Code varchar(50),WE_Date smalldatetime,SAT REAL DEFAULT 0,SUN REAL DEFAULT 0,MON REAL DEFAULT 0,TUE REAL DEFAULT 0,WED REAL DEFAULT 0,THU REAL DEFAULT 0,FRI REAL DEFAULT 0,Notes varchar(255),General varchar(50),PO_Number REAL,WWL_Number REAL,CN_Number REAL)SELECT @SQLBase ='INSERT INTO#tmpTimesheetDetails(RE_Code,PR_Code,AC_Code,WE_Da te,SAT,SUN,MON,TUE,WED,THU,FRI,Notes,General,PO_Nu mber,WWL_Number,CN_Number)VALUES ( 'SELECT @TimesheetCount=0WHILE LEN( @TimesheetDetails) > 1BEGINSELECT @SQLComplete = @SQLBase + LEFT( @TimesheetDetails,Charindex(';', @TimesheetDetails) -1) + ')'EXEC(@SQLComplete)SELECT @TimesheetCount = @TimesheetCount + 1SELECT @TimesheetDetails = RIGHT( @TimesheetDetails, Len(@TimesheetDetails)-Charindex(';', @TimesheetDetails))ENDIF (SELECT Count(*) FROM #tmpTimesheetDetails) <> @TimesheetCountSELECT @RetCode = 0, @RetMsg = @RetMsg + 'Timesheet Detailscouldn''t be saved.' + CHAR(13) + CHAR(10)-- If validation failed, exit procIF @RetCode = 0RETURN-- If validation ok, continueSELECT @RetMsg = @RetMsg + 'Timesheet Details ok.' + CHAR(13) +CHAR(10)/* RETURN*/-- Start transaction by inserting into Timesheet tableBEGIN TRANINSERT INTO timesheet.dbo.table1select RE_Code,PR_Code,AC_Code,WE_Date,SAT,SUN,MON,TUE,WE D,THU,FRI,Notes,General,PO_Number,WWL_Number,CN_Nu mberFROM #tmpTimesheetDetails-- Check if insert succeeded. If so, get ID.IF @@ROWCOUNT = 1SELECT @TimesheetID = @@IDENTITYELSESELECT @TimesheetID = 0,@RetCode = 0,@RetMsg = 'Insertion of new Timesheet failed.'-- If order is not inserted, rollback and exitIF @RetCode = 0BEGINROLLBACK TRAN-- RETURNEND--RETURNSELECT @Error =@@errorprint ''print "The value of @error is " + convert (varchar, @error)returnGO
View 2 Replies
View Related
Sep 23, 2015
If on the source I have a new column, the script generated by SqlPackage.exe recreates the table on the background with moving the data into a temp storage. If the table is big, such approach can cause issues.
Example of the script is below: in the source project I added columns [MyColumn_LINE_1] and [MyColumn_LINE_5].
Is there any way I can make it generating an alter statement instead?
BEGIN TRANSACTION;
SET TRANSACTION ISOLATION LEVEL SERIALIZABLE;
SET XACT_ABORT ON;
CREATE TABLE [dbo].[tmp_ms_xx_MyTable] (
[MyColumn_TYPE_CODE] CHAR (3) NOT NULL,
[Code] ....
The same script is generated regardless the table having data or not, having a clustered or nonclustered PK.
View 7 Replies
View Related
Oct 25, 2015
I have a temp table like this
CREATE TABLE #Temp
(
ID int,
Source varchar(50),
Date datetime,
CID varchar(50),
Segments int,
Air_Date datetime,
[code]....
Getting Error
Msg 102, Level 15, State 1, Procedure PublishToDestination, Line 34 Incorrect syntax near 'd'.
View 4 Replies
View Related
Jun 6, 2005
Hello,
I am receiving the following error:
Column name or number of supplied values does not match table definition
I am trying to insert values into a temp table, using values from the table I copied the structure from, like this:
SELECT TOP 1 * INTO #tbl_User_Temp FROM tbl_User
TRUNCATE TABLE #tbl_User_Temp
INSERT INTO #tbl_User_Temp EXECUTE UserPersist_GetUserByCriteria @Gender = 'Male', @Culture = 'en-GB'
The SP UserPersist_GetByCriteria does a
"SELECT * FROM tbl_User WHERE gender = @Gender AND culture = @Culture",
so why am I receiving this error when both tables have the same
structure?
The error is being reported as coming from UserPersist_GetByCriteria on the "SELECT * FROM tbl_User" line.
Thanks,
Greg.
View 2 Replies
View Related
Aug 14, 2015
Below is my table structure. And I am inserting data from other temp table.
CREATE TABLE #revf (
[Cusip] [VARCHAR](50) NULL, [sponfID] [VARCHAR](max) NULL, GroupSeries [VARCHAR](max) NULL, [tran] [VARCHAR](max) NULL, [AddDate] [VARCHAR](max) NULL, [SetDate] [VARCHAR](max) NULL, [PoolNumber] [VARCHAR](max) NULL, [Aggregate] [VARCHAR](max) NULL, [Price] [VARCHAR](max) NULL, [NetAmount] [VARCHAR](max) NULL,
[Code] ....
Now in a next step I am deleting the records from #revf table. Please see the delete code below
DELETE
FROM #revf
WHERE fi_gnmaid IN (
SELECT DISTINCT r2.fi_gnmaid
FROM #revf r1, #revf r2
[Code] ...
I don't want to create this #rev table so that i can avoid the delete statement. But data should not affect. Can i rewrite the above as below:
SELECT [Cusip], [sponfID], GroupSeries, [tran], [AddDate], [SetDate], [PoolNumber], [Aggregate], [Price], [NetAmount], [Interest],
[Coupon], [TradeDate], [ReversalDate], [Description], [ImportDate], MAX([fi_gnmaid]) AS Fi_GNMAID, accounttype, [IgnoreFlag], [IgnoreReason], IncludeReversals, DatasetID, [DeloitteTaxComments], [ReconciliationID],
[Code] ....
If my above statement is wrong . Where i can improve here? And actually i am getting 4 rows difference.
View 5 Replies
View Related
Sep 8, 2006
Hello
Is it possible to insert data into a temp table with data returned from a stored procedure joined with data from another table?
insert #MyTempTable
exec [dbo].[MyStoredProcedure] @Par1, @Par2, @Par3
JOIN dbo.OtherTable...
I'm missing something before the JOIN command. The temp table needs to know which fields need be updated.
I just can't figure it out
Many Thanks!
Worf
View 2 Replies
View Related
Sep 17, 2007
In a table-valued UDF, does the UDF use a table variable or a temp table to form the resultset returned?
View 1 Replies
View Related
Nov 23, 2007
Hello guys..
Can u plz help me by giving me an idea how i can copy the temp table data to permanent table
Thanks,
sohails
View 1 Replies
View Related
Jan 23, 2008
Hi!
What is the difference in performance if I use a Temp-table or a local-table variable in a storedprocedure?
Why?
//Daniel
View 5 Replies
View Related
Oct 5, 2015
I want to insert the data from temp table to other table. Only condition is, it needs to sorted based on tool number and tool date. For example if we have ten records for tool number 1000, it should be order by tool number and then based on tool_dt. Both tables doesn't have any primary keys. Please find below my code. I removed all the unnecessary columns for simple understanding. INSERT INTO tool_summary (tool_nbr, tool_dt) select tool_nbr, tool_dt from #tool order by tool_nbr, tool_dt...But this query is not working as expected. Data is getting shuffled.
Actual Data
Expected Result
1000
1-Aug
1000
1-Feb
1000
1-Jul
1000
[code]....
View 3 Replies
View Related
Dec 19, 2007
WE have a job that loads data from an Oralce DB into our SQL Server 2000 DB twice a day. The schedule has just changed so that now there is a possibility of having my west coast users impacted when it runs at 5 PM PST and my east coast users impacted when it runs at 7 AM EST. As a workaround, I have developed a DTS package that loads the data into temp tables instead of the real tables. IE. Oracle -> XTable_temp instead of Oracle -> XTable. The load sometimes takes about an hour to an hour and a half to load, so this solution works great, but I want to then lock the table, delete it and rename the temp table to table X. The pseudo code would be:
Begin Transaction
Lock Table XTable
Drop XTable
Alter Table XTable_temp rename to XTable
Release Lock XTable
End Transaction
Create XTable_temp
I see two issues with this solution. 1) I think if I can lock XTable that the lock would be released when the table is dropped and the XTable_temp was being renamed. 2) I can't find a command to rename a table.
Any ideas on a process that might help?
TIA,
A
View 5 Replies
View Related
Jul 11, 2006
I want to pass the 'inserted' table from a trigger into an SP, I think I need to do this by dumping inserted table into a temporary table and passing the temp table. However, I need to do this for many tables, and don't want to list all the column names for each table/trigger (maintenance nightmare).
Can I dump the 'inserted' table to a temp table WITHOUT specifying the column names?
View 16 Replies
View Related
Dec 17, 2004
I need to decide what is better to use: global temp table ( I can't use local one) or permanent table in SQL 2000 stored procedures. I extract data from linked server table and update several tables on our server.
Those procedures scheduled to run every 3 hours.
Another question: for some reasons when I used global temp table, I wasn't able to schedule multi steps with every step executing one of the stored procedures.I think global temp tables should be visible to other stored procedures, right?
Your suggestions?
View 1 Replies
View Related
Feb 21, 2007
Hi everyone, I'm fairly new to sql and right now I am struggling with a script. I am trying to extract data from a normal table into a temporary table, update it in the temporary table, then put it back into the normal table. I'll display my code, let me know what you think, any suggestions are appreciated. Thanks a lot.
Create table scripts (
UserID int,
UserName char(50),
ScrRan char(50),
StartTime datetime default getdate(),
EndTime datetime);
Create table errors (
ID int,
UserName char(50),
UserLogin char(50),
ErrorNumber int,
Message char(100),
TimeOfError datetime default getdate());
declare @error int
declare @msg varchar(100)
declare @startTime datetime
declare @endTime datetime
select @startTime = getDate()
SELECT *
INTO #Temp
FROM Publisher
WHERE pub_Name = 'Scene Publishing'
UPDATE #Temp
SET pub_Name = UPPER(pub_Name)
SELECT *
INTO Publisher
FROM #Temp
--Begins Error Checking Routine
select @error = @@error
IF @error <> 0
BEGIN
select @msg ='error: ' + convert(varchar(7), @error) +
''
insert into errors values (@@SPID, USER, USER_NAME(), @error,
@msg, getDate())
END
ELSE
BEGIN
select @endTime = getDate()
insert into scripts values (@@SPID, SYSTEM_USER, @startTime, @endTime)
END
select * from errors
select * from scripts
lost and loaded.
View 2 Replies
View Related
Jan 22, 2008
Hi, I wanna know is there any advantage of perf gain when using Derived Tables over Temp Tables, advice me which one is better to use. Can I create Indexes and Insert/Update records into Derived Tables.
-Senthil
View 8 Replies
View Related
Jan 26, 2007
Hi All,Hope someone can help me...Im trying to highlight the advantages of using table variables asapposed to temp tables within single scope.My manager seems to believe that table variables are not advantageousbecause they reside in memory.He also seems to believe that temp tables do not use memory...Does anyone know how SQL server could read data from a temp tablewithout passing the data contained therein through memory???Is this a valid advantage/disadvantage of table variables VS temptables?
View 2 Replies
View Related
Jan 17, 2008
In a previous post "Could #TempTable within SP cause lock on tempdb?" http://forums.microsoft.com/msdn/showpost.aspx?postid=2691763&siteid=1
It was obvious that we have to limit the use of #Temp table to a minimum. Let assume that some of the temp tables are really difficult to replace and we have to live with them.
Would it be easier on tempdb if the #TempTable is replaced by a table variable? Or do they all end up in tempdb?
Thanks in advance for any help.
View 4 Replies
View Related
Oct 19, 2007
I am trying to update a table in one database with data from a temporary table which i created in the tempdb.
I want to update field1 in the table with the tempfield1 from the #temp_table
The code looks something like this:
Use master
UPDATE [dbname].dbo.table
SET [dbname].dbo.table.field1 = [tempdb].dbo.#temp_table.tempfield1
WHERE ( [dbname].dbo.table.field2= [tempdb].dbo.#temp_table.tempfield2
AND [dbname].dbo.table.field3= [tempdb].dbo.#temp_table.tempfield3
AND [dbname].dbo.table.field4= [tempdb].dbo.#temp_table.tempfield4)
I get the following error:
Msg 4104, Level 16, State 1, Line 2
The multi-part identifier "tempdb.dbo.#temp_table.tempfield2" could not be bound.
Msg 4104, Level 16, State 1, Line 2
The multi-part identifier "tempdb.dbo.#temp_table.tempfield3" could not be bound.
Msg 4104, Level 16, State 1, Line 2
The multi-part identifier "tempdb.dbo.#temp_table.tempfield4" could not be bound.
What is wrong?
View 1 Replies
View Related
Nov 6, 2006
Hi all,
I am querying a table in oracle, the server connection to the Oracle database is determined by a criteria. Though how can I put the results from the oracle query into a temp table ?
This is the code i'm using for the query:
DECLARE @cmd VARCHAR(500)
declare @Year varchar(25)
set @Year = '2006'
DECLARE @Link VARCHAR(100)
DECLARE @Table VARCHAR(100)
select @Link = Server from tbl_Conn where Area='Floor'
select @Table = Target_Table from tbl_Conn where Area='Floor'
SET @cmd =
'
select * from OPENQUERY
(
' + @Link + ',
''
UPDATE '+ @Table +'
SET TARGET_VALUE = '+@Value+'
WHERE Date = '+@Year'
''
)
'
EXEC (@cmd)
How do I put the executed results into a TEMP table ?
Rgds,
View 2 Replies
View Related
Aug 24, 2006
on SQL Server 2005, no SP.
Currently using a cursor in a stored procedure to retrieve data from one table and to put it into another table. like so:
declare @HTR money
declare @Uniqueid varchar(15)
declare cur_HTR cursor for
select uniqueid, sum(hours_to_resolve) as thtr from com_trail_helpdesk_module group by uniqueid
open cur_htr
fetch next from cur_HTR into @Uniqueid, @HTR
while @@fetch_status = 0 begin
update com_hpd_helpdesk_history
set total_hours_to_resolve = @HTR
where case_id_ = @Uniqueid
and dateasat = @dateasat
fetch next from cur_HTR into @Uniqueid, @HTR
end
close cur_htr
deallocate cur_htr
...
This is taking about 45 minutes each time to do 21k records. Is there a faster, better way to do this?
View 10 Replies
View Related
May 31, 2008
HI ALL,iam creating a temporary table using following Stored procedure but when i complile the Stored procedure iam getting the following errorServer: Msg 2714, Level 16, State 1, Procedure SP!, Line 15There is already an object named '#TEMP2' in the database.the stored procedure is ALTER PROC SP1@SELECT VARCHAR(15)=NULL AS BEGIN IF @SELECT ='FOLDER'BEGIN SELECT DISTINCT(HIERARCHY_ID),HIERARCHY_NAME,HIERARCHY_DESCRIPTION,HIERARCHY_PARENT_ID INTO #TEMP2 FROM BM_HIERARCHY_MASTER ENDELSE IF @SELECT='PAGE' BEGIN SELECT DISTINCT(HIERARCHY_ID),HIERARCHY_NAME,HIERARCHY_DESCRIPTION,HIERARCHY_PARENT_ID INTO #TEMP2 FROM BM_HIERARCHY_MASTEREND
View 5 Replies
View Related
Apr 4, 2006
Which one is better to use User Defined function or Temp Table?
I am working on SQL Server 2005, and I have a user defined function that returns a table. I need to run queries on this table.
I am not sure if I should run the function once and store the results in a temp table and run queries on the temp table or call the UDF multiple times. I am concerned about performance.
Thanks
View 3 Replies
View Related
