Cursor Out Of Time
Jun 28, 2004
Hi,
First of all sorry about poor english.
I have the next problem:
I have a store procedure which declares a cursor which is a select from some tables. I´m surprised because the sp takes over 10 seconds on working and if i execute the select of the cursor as separate ways, it takes no more one second. I´ve changed the select with another easier select and it works 0 seconds, so it seems that the problem is in the select, but only if i use a cursor to save the regs, why????????
Thanks a lot.
View 3 Replies
ADVERTISEMENT
Jan 17, 2007
Hi all,
Can one of you help me with using a cursor that would insert only 100 rows at a time from source table 1 to target table 2. I am not able to loop beyond the first 100 rows.
Here is what I have till now:
CREATE procedure Insert100RowsAtaTime
AS
SET NOCOUNT ON
declare @Col1 int
declare @Col2 char(9)
DECLARE @RETURNVALUE int
DECLARE @ERRORMESSAGETXT varchar(510)
DECLARE @ERRORNUM int
DECLARE @LOCALROWCOUNT int
declare Insert_Cur cursor local fast_forward
FOR
SELECT top 100 Col1,Col2 from Table1
WHERE Col1 not in ( SELECT Col1 /* Col1 is PK. This statement is used to prevent the same rows from being inserted in Table 2*/
from Table2)
set @RETURNVALUE = 0
set @ERRORNUM = 0
BEGIN
open Insert_Cur
fetch NEXT from Insert_Cur into @Col1, @Col2
while (@@FETCH_STATUS = 0)
insert into Table2 (Col1,Col2) select @Col1,@Col2
SELECT @ERRORNUM = @@ERROR, @LOCALROWCOUNT = @@ROWCOUNT
IF @ERRORNUM = 0
BEGIN
IF @LOCALROWCOUNT >= 1
BEGIN
SELECT @RETURNVALUE = 0
END
ELSE
BEGIN
SELECT @RETURNVALUE = 1
RAISERROR ('INSERT FAILS',16, 1)
END
END
ELSE
BEGIN
SELECT @ERRORMESSAGETXT = description FROM [master].[dbo].[sysmessages]
WHERE error = @@ERROR
RAISERROR (@ERRORMESSAGETXT, 16, 1)
SELECT @RETURNVALUE = 1
END
fetch NEXT from Insert_Cur into @Col1, @Col2
end
close Insert_Cur
deallocate Insert_Cur
RETURN @RETURNVALUE
END
View 4 Replies
View Related
Feb 2, 2002
Hi, I'm newbie in SQL, could somebody tell me how do I walk through a table one record at a time without using a cursor please.
Greatly appreciated.
Ann
View 4 Replies
View Related
May 2, 2000
I wrote a stored procedure (see below), which within a database create a new column (Ordering)and order rows that have the same OID, DECISION_DATE and give a to column ORDERING value 1 to the highest VOTES_REQUIRED VALUE, VALUE 2 to the second Hignest value and so On.
In Other words I am creating a sort on Index (ORDERING Column) on subsets of the database which have same OID and DECISION_DATE based on the value of VOTES_REQUIRED.
The stored procedure is working and I get the right results, but IT TAKES 3 HOURS 30 MINUTES to go through 38,000 rows. I have to run this stored procedure for a database with 200,000 rows (it may take tens of hours...).
Is there any idea to improve the following code to make it run efficiently.
Thank you in Advance.
**************************************************
CREATE PROCEDURE SP_ORDERING_TEST AS
declare @oldoid varchar(12)
declare @olddecision_date varchar(75)
declare @oid varchar(12)
declare @decision_date varchar(75)
declare @ordering varchar(1)
declare @ordering_count int
declare @votes_required varchar(12)
set @oldoid = 'space'
set @olddecision_date = 'space'
set @oid = 'space'
set @decision_date = 'space'
set @votes_required='space'
set @Decision_id = 'space'
set @ordering = '0'
set @ordering_count = 0
declare review_test_cursor cursor for
select oid,decision_date,votes_required,ordering,decision _id from MYTABLE
open review_test_cursor
fetch review_test_cursor into @oid,@decision_date,@votes_required,
@ordering,@Decision_id
while (@@fetch_status = 0 )
begin
if @oldoid <> @oid or @olddecision_date <> @decision_date
begin
set @oldoid = @oid
set @olddecision_date = @decision_date
set @ordering_count=0
end
update MYTABLE
set ordering = CAST ((@ordering_count + 1) as VARCHAR)
where decision_id = @Decision_id
set @ordering_count = @ordering_count + 1
fetch review_test_cursor into @oid,@decision_date,@votes_required, @ordering,@Decision_id
end
close review_test_cursor
deallocate review_test_cursor
*************************
View 1 Replies
View Related
Oct 29, 2015
This store procedure will get some executable queries from the select statement, the cursor will fetch each rows to execute the query and insert the queries into table_3 to mark as 'E'. Until 17:00, this store procedure will stop execute the queries and just get the queries from select statement insert into table_3 to mark as 'C'.
I don't know why the outputs in table_3 are quiet different than I think. This store procedure comes out with two exactly same queries and one marked as C and another marked as E.
CREATE PROCEDURE procedure1
AS
DECLARE cursor_1 CURSOR FOR
SELECT
'This is a executable query'
FROM table_1
DECLARE @table_2
[code]....
View 1 Replies
View Related
Oct 29, 2015
This store procedure will get some executable queries from the select statement, the cursor will fetch each rows to execute the query and insert the queries into table_3 to mark as 'E'. Until 17:00, this store procedure will stop execute the queries and just get the queries from select statement insert into table_3 to mark as 'C'.
I don't know why the outputs in table_3 are quiet different than I think. This store procedure comes out with two exactly same queries and one marked as C and another marked as E.
CREATE PROCEDURE procedure1
AS
DECLARE cursor_1 CURSOR FOR
SELECT
'This is a executable query'
FROM table_1
DECLARE @table_2
DECLARE @stoptime DATETIME = NULL;
[Code] ....
View 8 Replies
View Related
May 15, 2015
This is my code and I don't know why this error keeps coming out : PS : I did cursor to execute query.Th error showed is bold:
DECLARE RegCreatedDate CURSOR FOR
SELECT DISTINCT (CONVERT(NVARCHAR,CreatedDate,103))Â
FROM CA_Registration WHERE Month(CreatedDate)= @paMonthIn AND YEAR(CreatedDate)=@paYearIn
OPEN RegCreatedDate
FETCH NEXT FROM RegCreatedDate INTO @RegCreatedDate
WHILE @@FETCH_STATUS = 0
[Code] ....
View 9 Replies
View Related
Oct 19, 2006
Hi,
I was just wondering if anybody came across this behaviour where closing a Fast Forward Read only cursor takes abnormally long time to close. I am running SQL Server 2005 standard edition.
Thanks
Nand
View 1 Replies
View Related
Aug 12, 2015
In MSDN file I read about static cursor
STATIC
Defines a cursor that makes a temporary copy of the data to be used by the cursor. All requests to the cursor are answered from this temporary table in
tempdb; therefore, modifications made to base tables are not reflected in the data returned by fetches made to this cursor, and this cursor does not allow modifications
It say's that modifications is not allowed in the static cursor. I have a questions regarding that
Static Cursor
declare ll cursor global static
           for select name, salary from ag
 open ll
            fetch from ll
Â
             while @@FETCH_STATUS=0
              fetch from ll
               update ag set salary=200 where 1=1
Â
  close ll
deallocate ll
In "AG" table, "SALARY" was 100 for all the entries. When I run the Cursor, it showed the salary value as "100" correctly.After the cursor was closed, I run the query select * from AG.But the result had updated to salary 200 as given in the cursor. file says modifications is not allowed in the static cursor.But I am able to update the data using static cursor.
View 3 Replies
View Related
Jul 20, 2005
Hello,I have a test database with table A containing 10,000 rows and a tableB containing 100,000 rows. Rows in B are "children" of rows in A -each row in A has 10 related rows in B (ie. B has a foreign key to A).Using ODBC I am executing the following loop 10,000 times, expressedbelow in pseudo-code:"select * from A order by a_pk option (fast 1)""fetch from A result set""select * from B where where fk_to_a = 'xxx' order by b_pk option(fast 1)""fetch from B result set" repeated 10 timesIn the above psueod-code 'xxx' is the primary key of the current Arow. NOTE: it is not a mistake that we are repeatedly doing the Aquery and retrieving only the first row.When the queries use fast-forward-only cursors this takes about 2.5minutes. When the queries use dynamic cursors this takes about 1 hour.Does anyone know why the dynamic cursor is killing performance?Because of the SQL Server ODBC driver it is not possible to havenested/multiple fast-forward-only cursors, hence I need to exploreother alternatives.I can only assume that a different query plan is getting constructedfor the dynamic cursor case versus the fast forward only cursor, but Ihave no way of finding out what that query plan is.All help appreciated.Kevin
View 1 Replies
View Related
Sep 20, 2007
I'm trying to implement a sp_MSforeachsp howvever when I call sp_MSforeach_worker
I get the following error can you please explain this problem to me so I can over come the issue.
Msg 16958, Level 16, State 3, Procedure sp_MSforeach_worker, Line 31
Could not complete cursor operation because the set options have changed since the cursor was declared.
Msg 16958, Level 16, State 3, Procedure sp_MSforeach_worker, Line 32
Could not complete cursor operation because the set options have changed since the cursor was declared.
Msg 16917, Level 16, State 1, Procedure sp_MSforeach_worker, Line 153
Cursor is not open.
here is the stored procedure:
Alter PROCEDURE [dbo].[sp_MSforeachsp]
@command1 nvarchar(2000)
, @replacechar nchar(1) = N'?'
, @command2 nvarchar(2000) = null
, @command3 nvarchar(2000) = null
, @whereand nvarchar(2000) = null
, @precommand nvarchar(2000) = null
, @postcommand nvarchar(2000) = null
AS
/* This procedure belongs in the "master" database so it is acessible to all databases */
/* This proc returns one or more rows for each stored procedure */
/* @precommand and @postcommand may be used to force a single result set via a temp table. */
declare @retval int
if (@precommand is not null) EXECUTE(@precommand)
/* Create the select */
EXECUTE(N'declare hCForEachTable cursor global for
SELECT QUOTENAME(SPECIFIC_SCHEMA)+''.''+QUOTENAME(ROUTINE_NAME)
FROM INFORMATION_SCHEMA.ROUTINES
WHERE ROUTINE_TYPE = ''PROCEDURE''
AND OBJECTPROPERTY(OBJECT_ID(QUOTENAME(SPECIFIC_SCHEMA)+''.''+QUOTENAME(ROUTINE_NAME)), ''IsMSShipped'') = 0 '
+ @whereand)
select @retval = @@error
if (@retval = 0)
EXECUTE @retval = [dbo].sp_MSforeach_worker @command1, @replacechar, @command2, @command3, 0
if (@retval = 0 and @postcommand is not null)
EXECUTE(@postcommand)
RETURN @retval
GO
example useage:
EXEC sp_MSforeachsp @command1="PRINT '?' GRANT EXECUTE ON ? TO [superuser]"
GO
View 7 Replies
View Related
Sep 25, 2007
part 1
Declare @SQLCMD varchar(5000)
DECLARE @DBNAME VARCHAR (5000)
DECLARE DBCur CURSOR FOR
SELECT U_OB_DB FROM [@OB_TB04_COMPDATA]
OPEN DBCur
FETCH NEXT FROM DBCur INTO @DBNAME
WHILE @@FETCH_STATUS = 0
BEGIN
SELECT @SQLCMD = 'SELECT T0.CARDCODE, T0.U_OB_TID AS TRANSID, T0.DOCNUM AS INV_NO, ' +
+ 'T0.DOCDATE AS INV_DATE, T0.DOCTOTAL AS INV_AMT, T0.U_OB_DONO AS DONO ' +
+ 'FROM ' + @DBNAME + '.dbo.OINV T0 WHERE T0.U_OB_TID IS NOT NULL'
EXEC(@SQLCMD)
PRINT @SQLCMD
FETCH NEXT FROM DBCur INTO @DBNAME
END
CLOSE DBCur
DEALLOCATE DBCur
Part 2
SELECT
T4.U_OB_PCOMP AS PARENTCOMP, T0.CARDCODE, T0.CARDNAME, ISNULL(T0.U_OB_TID,'') AS TRANSID, T0.DOCNUM AS SONO, T0.DOCDATE AS SODATE,
SUM(T1.QUANTITY) AS SOQTY, T0.DOCTOTAL - T0.TOTALEXPNS AS SO_AMT, T3.DOCNUM AS DONO, T3.DOCDATE AS DO_DATE,
SUM(T2.QUANTITY) AS DOQTY, T3.DOCTOTAL - T3.TOTALEXPNS AS DO_AMT
INTO #MAIN
FROM
ORDR T0
JOIN RDR1 T1 ON T0.DOCENTRY = T1.DOCENTRY
LEFT JOIN DLN1 T2 ON T1.DOCENTRY = T2.BASEENTRY AND T1.LINENUM = T2.BASELINE AND T2.BASETYPE = T0.OBJTYPE
LEFT JOIN ODLN T3 ON T2.DOCENTRY = T3.DOCENTRY
LEFT JOIN OCRD T4 ON T0.CARDCODE = T4.CARDCODE
WHERE ISNULL(T0.U_OB_TID,0) <> 0
GROUP BY T4.U_OB_PCOMP, T0.CARDCODE,T0.CARDNAME, T0.U_OB_TID, T0.DOCNUM, T0.DOCDATE, T3.DOCNUM, T3.DOCDATE, T0.DOCTOTAL, T3.DOCTOTAL, T3.TOTALEXPNS, T0.TOTALEXPNS
my question is,
how to join the part 1 n part 2?
is there posibility?
View 1 Replies
View Related
Aug 7, 2007
Hi all,
I have created a report in SSRS 2005 which is being viewed by users from different Time Zones.
I have a dataset which has a field of type datetime (UTC). Now I would like to display this Date according to the User Time Zone.
For example if the date is August 07, 2007 10:00 AM UTC,
then I would like to display it as August 07, 2007 03:30 PM IST if the user Time Zone is IST.
Similarly for other Time Zones it should display the time accordingly.
Is this possible in SSRS 2005?
Any pointers will be usefull...
Thanks in advance
sudheer racha.
View 5 Replies
View Related
Oct 5, 2004
I'm new to cursors, and I'm not sure what's wrong with this code, it run for ever and when I stop it I get cursor open errors
declare Q cursor for
select systudentid from satrans
declare @id int
open Q
fetch next from Q into @id
while @@fetch_status = 0
begin
declare c cursor for
Select
b.ssn,
SaTrans.SyStudentID,
satrans.date,
satrans.type,
SaTrans.SyCampusID,
Amount = Case SaTrans.Type
When 'P' Then SaTrans.Amount * -1
When 'C' Then SaTrans.Amount * -1
Else SaTrans.Amount END
From SaTrans , systudent b where satrans.systudentid = b.systudentid
and satrans.systudentid = @id
declare @arbalance money, @type varchar, @ssn varchar, @amount money, @systudentid int, @transdate datetime, @sycampusid int, @before money
set @arbalance = 0
open c
fetch next from c into @ssn, @systudentid, @transdate, @type, @sycampusid, @amount
while @@fetch_status = 0
begin
set @arbalance = @arbalance + @amount
set @before = @arbalance -@amount
insert c2000_utility1..tempbalhistory1
select @systudentid systudentid, @sycampusid sycampusid, @transdate transdate, @amount amount, @type type, @arbalance Arbalance, @before BeforeBalance
where( convert (int,@amount) <= -50
or @amount * -1 > @before * .02)
and @type = 'P'
fetch next from c into @ssn, @systudentid, @transdate, @type, @sycampusid, @amount
end
close c
deallocate c
fetch next from Q into @id
end
close Q
deallocate Q
select * from c2000_utility1..tempbalhistory1
truncate table c2000_utility1..tempbalhistory1
View 1 Replies
View Related
Jul 20, 2005
I having a difficult time here trying to figure out what to do here.I need a way to scroll through a recordset and display the resultswith both forward and backward movement on a web page(PHP usingADO/COM)..I know that if I use a client side cursor all the records get shovedto the client everytime that stored procedure is executed..if thisdatabase grows big wont that be an issue?..I know that I can set up a server side cursor that will only send therecord I need to the front end but..Ive been reading around and a lot of people have been saying never touse a server side cursor because of peformance issues.So i guess im weighing network performance needs with the client sidecursor vs server performance with the server side cursor..I am reallyconfused..which one should I use?-Jim
View 1 Replies
View Related
Apr 25, 2014
Sample Table
USE [Testing]
GO
/****** Object: Table [dbo].[Testing] Script Date: 4/25/2014 11:08:18 AM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
[Code] ....
It seems to work fine with one million records.
Each primary key is unique, but the begindate is non-unique, and i guess even if i use datetime2 and add nanoseconds, from what i have read, there is a chance that i could have a duplicate datetime since the date is imported via XML from multiple sources.
View 7 Replies
View Related
Jun 11, 2015
Is there a way to keep track in real time on how long a stored procedure is running for? So what I want to do is fire off a trace in a stored procedure if that stored procedure is running for over like 5 minutes.
View 5 Replies
View Related
Oct 22, 2015
I am trying to load previous days data at 3 am via a SSIS job.
The Date variable is initiated as DATEADD("dd",-1, GETDATE()) in the for loop.
Now, as this job runs at 3 am, and I set the variable as GETDATE() - 1, it excluded the data from 12 am to 3 am in the resultset as Date is set as YYYY-MM-DD 03:00:00:000 I need this to be set as YYYY-MM-DD 00:00:00:000
How can i do this?Â
View 2 Replies
View Related
Oct 3, 2015
I hope to update a DateTime column value with a Time input parameter.  Poor attempt below but it looks like the @ApptTime param is coming in as 10:45:00.0000000 and I might have an existing @SendOnDate as: 2015-10-05 07:00:00.000...I hope to end up with 2015-10-05 10:45:00.000
ALTER PROCEDURE [dbo].[SendEditUPDATE]
@QuePoolID int=null
,@ApptTime time(7)
,@SendOnDate datetime
[code]...
View 14 Replies
View Related
Dec 15, 2006
I am using VS2005 (VB) to develop a PPC WM5.0 Program. And I am using SQLCE 3.0. My PPC Hardware is in 400MHz.
The question is when the program try to insert the first record into sdf database after each time the program started. It takes a long time. Does anyone know why and how can I fix it?
I will load the whole database into a dataset when the program start and do all the "Insert", "Update", "Delete" in this dataset and fill it into database after each action.
cn.Open()
sda = New SqlCeDataAdapter(SQL, cn) 'SQL = Select * From Table
scb = New SqlCeCommandBuilder(sda)
sda.Update(dataset)
cn.Close()
I check the sda.update(), it takes about 0.08s for filling one record into database normally. But:
1. Start the PPC Program
2. Load DB into dataset
3. Create a ONE new record in dataset
4. Fill back to DB
When I take this four steps everytime, the filling time is almost 1s or even more!
Actually, 0.08s is just a normal case. Sometimes, it still takes over 1s to filling back a dataset which only inserted one record when the program is running. (Even all inserted records are exactly the same in data jsut different in the integer key)
However, when I give up the dataset and using the following code:
cn.Open()
Dim cmd As New SqlCeCommand(SQL, cn) ' I have build the insert SQL before (Insert Into Table values(XXXXXXXXXXXXXXX All field)
cmd.CommandType = CommandType.Text
cmd.ExecuteNonQuery()
cn.Close()
StartTime = Environment.TickCount
I found that it is still the same that the first inserted record takes more time, but just about 0.2s. And the normal insert time is around 0.02s. It is 4 times faster!!!
View 1 Replies
View Related
Apr 21, 2015
SELECTÂ
  CONVERT(VARCHAR(10),attnc_chkin_dt,101) as INDATE,
  CONVERT(VARCHAR(10),attnc_chkin_dt,108) as TimePart
FROM pmt_attendance
o/p
indate   04/18/2015
time part :17:45:00
I need to convert this 17:45:00 to 12 hours date format...
View 8 Replies
View Related
Nov 12, 2007
Hi,
We need to select rows from the database that have been recently inserted/updated. We have a main primary table (COMMIT_TEST) and a second update table (COMMIT_TEST_UPDATE). The update table contains the primary key and a LAST_UPDATE field which is a datetime (to tell us when an update occurred). Triggers on the primary table are used to populate the update table.
If we insert or update the primary table in a transaction, we would expect that the datetime of the insert/update would be at the commit, however it seems that the insert/update statement is cached and getdate() is executed at the time of the cache instead of the commit. This causes problems as we select rows based on LAST_UPDATE and a commit may occur later but the earlier insert timestamp is saved to the database and we miss that update.
We would like to know if there is anyway to tell the SQL Server to not execute the function getdate() until the commit, or any other way to get the commit to create the correct timestamp.
We are using default isolation level. We have tried using getdate(), current_timestamp and even {fn Now()} with the same results. SQL Queries that reproduce the problem are provided below:
/* Different functions to get current timestamp €“ all have been tested to produce the same results */
/*
SELECT GETDATE()
GO
SELECT CURRENT_TIMESTAMP
GO
SELECT {fn Now()}
GO
*/
/* Use these statements to delete the tables to allow recreate of the tables */
/*
DROP TABLE COMMIT_TEST
DROP TABLE COMMIT_TEST_UPDATE
*/
/* Create a primary table and an UPDATE table to store the date/time when the primary table is modified */
CREATE TABLE dbo.COMMIT_TEST (PKEY int PRIMARY KEY, timestamp) /* ROW_VERSION rowversion */
GO
CREATE TABLE dbo.COMMIT_TEST_UPDATE (PKEY int PRIMARY KEY, LAST_UPDATE datetime, timestamp ) /* ROW_VERSION rowversion */
GO
/* Use these statements to delete the triggers to allow reinsert */
/*
drop trigger LOG_COMMIT_TEST_INSERT
drop trigger LOG_COMMIT_TEST_UPDATE
drop trigger LOG_COMMIT_TEST_DELETE
*/
/* Create insert, update and delete triggers */
create trigger LOG_COMMIT_TEST_INSERT on COMMIT_TEST for INSERT as
begin
declare @time datetime
select @time = getdate()
insert into COMMIT_TEST_UPDATE (PKEY,LAST_UPDATE)
select PKEY, getdate()
from inserted
end
GO
create trigger LOG_COMMIT_TEST_UPDATE on COMMIT_TEST for UPDATE as
begin
declare @time datetime
select @time = getdate()
update COMMIT_TEST_UPDATE
set LAST_UPDATE = getdate()
from COMMIT_TEST_UPDATE, deleted, inserted
where COMMIT_TEST_UPDATE.PKEY = deleted.PKEY
end
GO
/* In our application deletes should never occur so we don€™t log when they get modified we just delete them from the UPDATE table */
create trigger LOG_COMMIT_TEST_DELETE on COMMIT_TEST for DELETE as
begin
if ( select count(*) from deleted ) > 0
begin
delete COMMIT_TEST_UPDATE
from COMMIT_TEST_UPDATE, deleted
where COMMIT_TEST_UPDATE.PKEY = deleted.PKEY
end
end
GO
/* Delete any previous inserted record to avoid errors when inserting */
DELETE COMMIT_TEST WHERE PKEY = 1
GO
/* What is the current date/time */
SELECT GETDATE()
GO
BEGIN TRANSACTION
GO
/* Insert a record into the primary table */
INSERT COMMIT_TEST (PKEY) VALUES (1)
GO
/* Simulate additional processing within this transaction */
WAITFOR DELAY '00:00:10'
GO
/* We expect at this point that the date is written to the database (or at least we need some way for this to happen) */
COMMIT TRANSACTION
GO
/* get the current date to show us what date/time should have been committed to the database */
SELECT GETDATE()
GO
/* Select results from the table €“ we see that the timestamp is 10 seconds older than the commit, in other words it was evaluated at */
/* the insert statement, even though the row could not be read with a SELECT as it was uncommitted */
SELECT * FROM COMMIT_TEST
GO
SELECT * FROM COMMIT_TEST_UPDATE
Any help would be appreciated, we understand we could make changes to the application/database to approximate what we need, but all the solutions have identified suffer from possible performance issues, or could still lead to missing deals (assuming the commit time is larger than some artifical time window).
Regards,
Mark
View 8 Replies
View Related
Sep 21, 2015
I need to do a time test for restoring an Azure SQL database from a point in time. Can I automate this through PowerShell.
View 3 Replies
View Related
Dec 26, 2014
I need to take a temporary table that has various times stored in a text field (4:30 pm, 11:00 am, 5:30 pm, etc.), convert it to miltary time then cast it as an integer with an update statement kind of like:
Update myTable set MovieTime = REPLACE(CONVERT(CHAR(5),GETDATE(),108), ':', '')
how this can be done while my temp table is in session?
View 2 Replies
View Related
Oct 7, 2015
I have a table called employee_punch_record that we use to store employee time clock punches.
The columns are:
employeeid,
punch_timestamp,
punch_type (In / Out),
closed (bit used as status for open or closed pay periods),
ident
Here are some examples of a record:
bkingery62015-10-06 16:59:04.000In0
bkingery72015-10-06 16:59:09.000Out0
bkingery82015-10-06 16:59:13.000In0
bkingery92015-10-06 18:22:44.000Out0
bkingery102015-10-06 18:22:46.000In0
bkingery112015-10-06 18:22:48.000Out0
bkingery122015-10-06 18:22:51.000In0
tfeller52015-10-05 17:00:05.000In0
We are using SQL Server 2008 as our database and use Access as a GUI. I am looking to create a form in Access where employees can access their time card and request changes from management. I want to use the format from the attached screen shot for the form. I pretty much know how to do it all, the only point of complication is trying to figure out the easiest way to get the transaction punch record data on employee_punch_record into a format where I can easily populate the form in the horizontal format you see in the screen shot.
I am not super strong in SQL, but figure I can do it using a formatting table of some sort. quick and easy way to move transaction records into a more horizontally oriented record?
View 0 Replies
View Related
Feb 19, 2008
Hi all,
I have a very simple time series model which processing works fine without any problem. However when I run the following query
SELECT
[TimeSeries].[PriceChange],
[TimeSeries].[Symbol],
PredictTimeSeries(PriceChange, -3, 2)
From
[TimeSeries]
WHERE
[TimeSeries].[Symbol] = 'x'
I get the following error:
TITLE: Microsoft SQL Server 2005 Analysis Services
------------------------------
Error (Data mining): A time series prediction was requested with a start time further in the past than the internal models of the mining model, TimeSeries, specified in the HISTORIC_MODEL_GAP and HISTORIC_MODEL_COUNT parameters can process.
The following is the excerpt of the minding model script related to the two parameters:
<AlgorithmParameters>
<AlgorithmParameter>
<Name>MISSING_VALUE_SUBSTITUTION</Name>
<Value xsi:type="xsdtring">Previous</Value>
</AlgorithmParameter>
<AlgorithmParameter>
<Name>HISTORIC_MODEL_GAP</Name>
<Value xsi:type="xsd:int">1</Value>
</AlgorithmParameter>
<AlgorithmParameter>
<Name>HISTORIC_MODEL_COUNT</Name>
<Value xsi:type="xsd:int">10</Value>
</AlgorithmParameter>
</AlgorithmParameters>
These HISTORIC_MODEL_GAP (1) and HISTORIC_MODEL_COUNT (10) should accommodate PredictTimeSeries(PriceChange, -3, 2). Could anyone shed some light on this?
View 3 Replies
View Related
Apr 30, 2015
we have problems with our SQL Reporting Service 2012 (SSRS) server . We have setup Kerberos delegation between SSRS and the database server (SQL Server Always-on cluster) so users are authenticated down to the database. The issue occurs from time to time that SSRS loses the ability to delegate the user credentials to the database. At this point in time the Report Server logs contain rejected database connections because of ANONYMOUS logon. After restarting SSRS the problem is gone.
View 2 Replies
View Related
May 26, 2005
Hi,
I have a table which has a few fields, one being "datetime_traded". I need to write a query which returns the row which has the closest time (down to second) given a date/time. I'm using MS SQL.
Here's what I have so far:
Code:
select * from TICK_D
where datetime_traded = (select min( abs(datediff(second,datetime_traded , Convert(datetime,'2005-05-30:09:31:09')) ) ) from TICK_D)
But I get an error - "The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.".
Does anyone know how i could do this? Thanks a lot for any help!
View 2 Replies
View Related
Aug 17, 2007
Ok, so I have some horribly convuluted SQL that I would love to optomize. I'm not happy leaving it in it's current state, that's for sure!
I'm currently working on our test bed servers, so obviously my stats are out because of the "crap-ness" (yes, that's the technical term) of the hardware, but still, it should NEVER need to take this long!!
Basically, the issue arises in the nasty join to the career table (one employee can have multiple career lines). Just to make things complicated, employees can have any number of career records on any given date, these can even be input for future career events. The following SQL picks out the latest-current career date for each employee based on the career_date being <= GetDate() and the date of entry for this date being the greatest.
E.g.
career_date | datetime_created
2009-01-01 | 2006-05-05 13:55:21.000
2007-01-01 | 2006-05-05 13:54:18.000
2007-01-01 | 2006-05-05 13:52:55.000
From the above we want to return
2007-01-01 | 2006-05-05 13:54:18.000
SET STATISTICS IO ON
SET STATISTICS TIME ON
SELECT a.sAMAccountNameAs 'sAMAccountName'
, a.userPrincipalNameAs 'userPrincipalName'
, 'TRUE'As 'Modify'
, RTRIM(e.unique_identifier)As 'employeeID'
, RTRIM(e.employee_number)As 'employeeNumber'
, RTRIM(e.known_as)
+ CASE WHEN RTRIM(e.surname) IS NOT NULL THEN
' ' + RTRIM(e.surname) ELSE NULL ENDAs 'displayName'
, RTRIM(e.known_as)As 'givenName'
, RTRIM(e.surname)As 'sn'
, RTRIM(c.job_title)As 'title'
, RTRIM(c.division)As 'company'
, RTRIM(c.department)As 'department'
, RTRIM(l.description)As 'physicalDeliveryOfficeName'
, RTRIM(REPLACE(am.dn,'\',''))As 'manager'
, t.full_mobile
+ CASE WHEN RTRIM(t.mobile_number) IS NOT NULL THEN
' (DD: ' + RTRIM(t.mobile_number) + ')'ELSE NULL END
As 'mobile'
, t.mobile_numberAs 'otherMobile'
, ad.address_ad_countryAs 'c'
, ad.address_ad_address1
+ CASE WHEN ad.address_ad_address2 IS NOT NULL THEN
', ' + ad.address_ad_address2 ELSE NULL END
+ CASE WHEN ad.address_ad_address3 IS NOT NULL THEN
', ' + ad.address_ad_address3 ELSE NULL END
+ CASE WHEN ad.address_ad_address4 IS NOT NULL THEN
', ' + ad.address_ad_address4 ELSE NULL END
+ CASE WHEN ad.address_ad_address5 IS NOT NULL THEN
', ' + ad.address_ad_address5 ELSE NULL ENDAs 'streetAddress'
, ad.address_ad_poboxAs 'postOfficeBox'
, ad.address_ad_cityAs 'l'
, ad.address_ad_CountyAs 'st'
, ad.address_ad_postcodeAs 'postalCode'
, RTRIM(ad.address_ad_telephone) +
CASE WHEN RTRIM(a.othertelephone) IS NOT NULL
AND RTRIM(ad.address_ad_telephone) IS NOT NULL THEN
' (Ext: ' + RTRIM(a.othertelephone) + ')'
ELSE
CASE WHEN RTRIM(a.othertelephone) IS NOT NULL
AND RTRIM(ad.address_ad_telephone) IS NULL THEN
'Ext: ' + RTRIM(a.othertelephone)
ELSE NULL
END
ENDAs 'telephoneNumber'
FROM employee e
LEFT
JOIN career c
ON c.parent_identifier = e.unique_identifier
AND c.career_date =(
SELECTmax(c2.career_date)
FROMpwa_master.career c2
WHEREc2.parent_identifier = c.parent_identifier
ANDc2.career_date <= GetDate()
)
AND c.datetime_created =(
SELECT max(c3.datetime_created)
FROMpwa_master.career c3
WHEREc3.parent_identifier = c.parent_identifier
ANDc3.career_date = c.career_date
)
LEFT
OUTER
JOIN AD_Import am
ON am.employeeNumber = c.manager_number
INNER
JOIN AD_Import a
ON a.employeeID = e.unique_identifier
LEFT
JOIN AD_Telephone t
ON t.unique_identifier = e.unique_identifier
LEFT
JOIN AD_Address ad
ON ad.address_pwa_location = e.location
LEFT
JOIN xlocat l
ON l.code = c.location
WHERE (a.employeeNumber IS NOT NULL
OR a.employeeID IS NOT NULL)
SQL Server Execution Times:
CPU time = 0 ms, elapsed time = 0 ms.
(1706 row(s) affected)
Table 'AD_Import'. Scan count 4, logical reads 106, physical reads 0, read-ahead reads 0.
Table 'AD_Address'. Scan count 1, logical reads 2, physical reads 0, read-ahead reads 0.
Table 'AD_Telephone'. Scan count 2, logical reads 10, physical reads 0, read-ahead reads 0.
Table 'Worktable'. Scan count 868, logical reads 956, physical reads 0, read-ahead reads 0.
Table 'xlocat'. Scan count 2, logical reads 8, physical reads 0, read-ahead reads 0.
Table 'career'. Scan count 5088, logical reads 2564843, physical reads 0, read-ahead reads 0.
Table 'people'. Scan count 1697, logical reads 5253, physical reads 0, read-ahead reads 0.
Table 'Worktable'. Scan count 826, logical reads 914, physical reads 0, read-ahead reads 0.
SQL Server Execution Times:
CPU time = 15203 ms, elapsed time = 8114 ms.
Any advice on what I can do to optomize?
Oh judt to point out that "employee" is a view on the "Table 'people'."
EDIT: I know it's pointing out the obvious, but I'm pulling out the managers "DN" from AD_Import based on the manager_number and employeeNumber matching.
View 14 Replies
View Related
Dec 18, 2007
I need a formula to calculate the time (let's say in minutes) between two dates/times.
The problem is that I have to exclude the time between 06 PM and 06 AM and also exclude the time in the weekend (Saturday and Sunday).
I will use this in a couple of reports made in Reporting Services.
If anyone have an algoritm that could be modified for this and is willing to share this I would be very grateful.
Many thanks!
/Per Lissel
View 3 Replies
View Related
Apr 10, 2007
Hi all,
I have created several global temp tables to cache some intermediate results ...
However, it seems that after a while those tables will be dropped by SQL Server 2005 automatically (I have not restarted the server and no drop table statement ever executed against those tables). Is this a feature by design? How to make those global temp tables persistence to next service restart?
Thanks,
Ning
View 5 Replies
View Related
Dec 19, 2006
I wanted to know how we can handle Time Zones and Daylight Savings Time in SQL Server 2000 as well as 2005.
Any pointers would be helpful.
Pranav
View 1 Replies
View Related
Sep 14, 2015
At the moment I already added the DataSet I'm gonna be using. I have 2 date parameters Start Time and End Time.
What I would like to do  for the report is to only pull results greater than 48 hours to the report
How can I accomplish this?
View 4 Replies
View Related
