I have a situation where I have multiple source tables, I need to populate the destination tables that have the same schema as the source ones. I dont want to do the repetitive task of creating a Dataflow for each source-destination load.
I want to create one custom dataflow component and loop through all my source tables and provide destination tables dynamically.
Is there a way to do that? Any custom data flow component out there??
I'm trying to create a custom data flow destination, and it has a custom property that needs to get value from variable(similar to the FileNameVariable property of Raw File Destination), how can I do that?
I'm creating a custom data flow transformation in c#.
I would like to use expressions within this component in the same way as in the derived column component: specifying the expression as a custom property of an output column, then evaluating this expression for each row of the buffer and using this evaluated expression to populate my output column values.
So I've added an custom expression on my output column, and set its expression type to CPET_NOTIFY
But in the ProcessInput method I don't manage to get the evaluated expressions, when I use exp.Value I get my expression definition and not its evaluation.
Is there a way to get these evaluated expressions ?
I've created my own custom data flow transformation task (using C#) that will parse a fullname and output the various name parts. In the ProvideComponentProperties method, I create 5 output columns (prefix, first, middle, last, and suffix). In the ProcessInput method, I parse the input and add the name parts to the buffer. The bad thing is that I€™m making an assumption on the position of the Full Name input column within the buffer.
I would like the €œuser€? to be able to map their "full name" input column to a known Full Name column so I don€™t have to make any assumptions. This is the first SSIS task I€™ve tried to create and I haven€™t been able to find very many examples online.
I created a custom transform that has a custom interface and is a wizard that uses a web service. It creates custom properties and output columns on the fly. I set the dialog result to Ok and close at the end of the steps. The transform then has the custom fields and output columns I created in the wizard. I've verified this by right clicking on the transform and going to the advanced editor. If I then immediately run the package, the custom fields don't exist in the CustomPropertiesCollection. If I close the package and reopen it, the properties now are gone. If I then go through the wizard again, thus recreating the properties, they stay and don't disappear. The quickest way to get a working transform is to add it to my data flow then save, close and reopen the package and then go through the wizard. Just saving after I add the transform does not help.
Does anyone know what might be causing this very strange problem?
I've been having an issue with the integration of a third-party DLL into a custom data flow component.
The company sent me a C# project that generates a simple console application. The project includes a class that calls their DLL with DllImport. The console application runs fine.
I created a stand-alone class using the C# class they sent to expose the methods of their DLL. In my custom component, I'm referencing this class to pass data to and from their DLL.
The first method from that stand-alone class that my component encounters simply gets their installation path from the registry and does not use DllImport. That path retrieval works fine. The next method calls a function that is declared with DllImport. Each time the call fails with "System.DllNotFoundException = {"Unable to load DLL AMZip.dll': Exception from HRESULT: 0xE06D7363"}".
I've copied this DLL to countless locations (e.g., the PipelineComponents directory, the project/solution bin directory) and included these paths in all manner of path variables.
What am I missing here? Their DLL is not strong named (does this matter since I'm using DllImport?), my stand-alone class is, and of course, the custom component itself is. I appreciate the help.
I'm having my first go at developing a destination adapter which will send data to an update Web Service.
I've got some rather big gaps in my understanding. I've been following the various samples I've found on the net and have validated my mapping and picked up all the available column names and datatypes which are appearing in the Input and Output Properties tab of the Advanced Editor but I only have a tab for "Input Columns" and not "Column Mappings".
Which method defines the availble columns for the user to map?
Let me know if I haven't given enough information.
I implemented a custom source adaptor. I want to be able to associate custom properties with each of the output columns. I want them to be passed downsteam. The idea is to be able to retrieve these information in a downstream custom transformations of ours and process the various columns accordingly. How do I go about doing this?I noticed that the IDTSCustomProperty90 seems to have a local scope only.
I developed a custom data flow task in .net 2.0 using Visual Studio 2005. I installed it into GAC using GACUTIL and also copied it into the pipeline directory. This task runs absolutely fine when I run it on my local machine both in BIDS and using the script in windows 2000 environment. However, when I deployed this package into a windows 2003 server, the package fails at the custom task level. I checked the GAC in windowsassembly directory and it is present. Also I copied the file into the PipeLine directory and verified that I copied it into the correct pipeline directory by checking the registry. The version of the assembly is still Debug. I looked up documentation in MSDN but there is very little information about the errors I am seeing.
The error I get is pasted below, Can somebody please help me as I am currently stuck and running out of ideas to fix this problem.
Code: 0xC0047067
Source: DFT Raw File DFT Raw File (DTS.Pipeline)
Description: The "component "_" (2546)" failed to cache the component metadata object and returned error code 0x80131600.
Code: 0xC004706C
Source: DFT Raw File DFT Raw File (DTS.Pipeline)
Description: Component "component "_" (2546)" could not be created and returned error code 0xC0047067. Make sure that the component is registered correctly.
I am creating a customer data flow component for SSIS for use in a package. I've got some custom properties that I am exposing using the supplied advanced editor (no custom property editor here).
Some of my properties are enumerated types, and I have deciphered how to get those properties to show as dropdown lists of their respective enumerations. (For those of you who may be looking as hard as I did as to how to accomplish this, see the end of this post.)
I also have a few properties which request SSIS package variable names - such as an file name variable. However, I can't figure out how to tell the advanced editor that the property is looking for an SSIS variable, so that it can show a dropdown list of package variables, much like virtually any other Microsoft supplied Data Flow component can.
Is there a Type Converter I could specify for those custom properties? Is there another way to instruct SSIS that my custom property is expecting a variable? Or do I need to code a custom UI for editing my Data Flow Task?
To create a dropdown list of values for a custom property that represents an enum, do the following:
1. Create your enum definition, such as "public enum ThisIsMyEnum { one, two }"
2. Create a new class that inherits from TypeConverter, such as "public class MyEnumConverter : TypeConverter"
3. Override "CanConvertFrom", and return true if "sourceType == typeof(string)"
4. Override "CanConvertTo", and return true if "destinationType == typeof(string)"
5. Override "ConvertFrom", and return the enum value (such as "one" or "two" in my example) that corresponds to the string passed in the parameter "value"
6. Override "ConvertTo", and return a string that corresponds to the enum value passed in the parameter "value"
7. Override "GetStandardValuesSupported" and return true
8. Override "GetStandarValuesExclusive" and return true to indicate that ONLY the enum values should be accepted
9. Override "GetStandardValues", and return a new StandardValuesCollection constructed with Enum.GetValues() of your enum, such as "return new StandardValuesCollection(Enum.GetValues(typeof(ThisIsMyEnum)));"
10. Just above your "public enum" declaration, add a "TypeConverter" attribute to link your type converter to your enum, such as "[TypeConverter(typeof(MyEnumConverter))]"
11. In "ProvideComponentProperties", after you've created your custom property like this: "IDTSCustomProperty90 propEnum = ComponentMetaData.CustomPropertyCollection.New()", add another line to specify the TypeConverter property of the property to the full assembly name of your type converter, like so: "propEnum.TypeConverter = typeof(MyEnumConverter).AssemblyQualifiedName;"
I've built a simple custom data flow transformation component following the Hands On Lab (http://www.microsoft.com/downloads/details.aspx?familyid=1C2A7DD2-3EC3-4641-9407-A5A337BEA7D3&displaylang=en) and the Books Online (ms-help://MS.MSDNQTR.v80.en/MS.MSDN.v80/MS.SQL.v2005.en/dtsref9/html/adc70cc5-f79c-4bb6-8387-f0f2cdfaad11.htm and ms-help://MS.MSDNQTR.v80.en/MS.MSDN.v80/MS.SQL.v2005.en/dtsref9/html/b694d21f-9919-402d-9192-666c6449b0b7.htm).
All it is supposed to do is create an output column and set its value to the result of calling a web service method (the transformation is synchronous). Everything seems fine, but when I run the data flow task that contains it, it doesn't generate any output. The Visual Studio debugger displays it as yellow, with 1,385 rows going into it, but the data viewer attached to its output is empty. The output metadata looks just like I expect: all of my input columns plus the new column, correctly typed. No validation or run-time warnings or errors are reported.
I'll include the entire C# file below, which only overrrides the ProvideComponentProperties, Validate, PreExecute, ProcessInput, and PostExecute methods of the parent PipelineComponent class.
Since this is effectively a specialization of the DerivedColumn transformation, could I inherit from the class that implements the DC component instead of PipelineComponent? How do I even find out what that class is?
Thanks! Here's the code: using System; // using System.Collections.Generic; // using System.Text;
using Microsoft.SqlServer.Dts.Pipeline; using Microsoft.SqlServer.Dts.Pipeline.Wrapper; using Microsoft.SqlServer.Dts.Runtime.Wrapper;
namespace CustomComponents { [DtsPipelineComponent(DisplayName = "GID", ComponentType = ComponentType.Transform)] public class GidComponent : PipelineComponent { /// /// Column indexes for faster processing. /// private int[] inputColumnBufferIndex; private int outputColumnBufferIndex;
/// /// The GID web service. /// private GID.WS_PDF.PDFProcessService gidService = null;
/// /// Called to initialize/reset the component. /// public override void ProvideComponentProperties() { base.ProvideComponentProperties(); // Remove any existing metadata: base.RemoveAllInputsOutputsAndCustomProperties(); // Create the input and the output: IDTSInput90 input = this.ComponentMetaData.InputCollection.New(); input.Name = "Input"; IDTSOutput90 output = this.ComponentMetaData.OutputCollection.New(); output.Name = "Output"; // The output is synchronous with the input: output.SynchronousInputID = input.ID; // Create the GID output column (16-character Unicode string): IDTSOutputColumn90 outputColumn = output.OutputColumnCollection.New(); outputColumn.Name = "GID"; outputColumn.SetDataTypeProperties(Microsoft.SqlServer.Dts.Runtime.Wrapper.DataType.DT_WSTR, 16, 0, 0, 0); }
/// /// Only 1 input and 1 output with 1 column is supported. /// /// public override DTSValidationStatus Validate() { bool cancel = false; DTSValidationStatus status = base.Validate(); if (status == DTSValidationStatus.VS_ISVALID) { // The input and output are created above and should be exactly as specified // (unless someone manually edited the persisted XML): if (ComponentMetaData.InputCollection.Count != 1) { this.ComponentMetaData.FireError(0, ComponentMetaData.Name, "Invalid metadata: component accepts 1 Input.", string.Empty, 0, out cancel); status = DTSValidationStatus.VS_ISCORRUPT; } else if (ComponentMetaData.OutputCollection.Count != 1) { this.ComponentMetaData.FireError(0, ComponentMetaData.Name, "Invalid metadata: component provides 1 Output.", string.Empty, 0, out cancel); status = DTSValidationStatus.VS_ISCORRUPT; } else if (ComponentMetaData.OutputCollection[0].OutputColumnCollection.Count != 1) { this.ComponentMetaData.FireError(0, ComponentMetaData.Name, "Invalid metadata: component Output must be 1 column.", string.Empty, 0, out cancel); status = DTSValidationStatus.VS_ISCORRUPT; } // And the output column should be a Unicode string: else if ((ComponentMetaData.OutputCollection[0].OutputColumnCollection[0].DataType != DataType.DT_WSTR) || (ComponentMetaData.OutputCollection[0].OutputColumnCollection[0].Length != 16)) { ComponentMetaData.FireError(0, ComponentMetaData.Name, "Invalid metadata: component Output column data type must be (DT_WSTR, 16).", string.Empty, 0, out cancel); status = DTSValidationStatus.VS_ISBROKEN; } } return status; }
/// /// Called before executing, to cache the buffer column indexes. /// public override void PreExecute() { base.PreExecute(); // Get the index of each input column in the buffer: IDTSInput90 input = ComponentMetaData.InputCollection[0]; inputColumnBufferIndex = new int[input.InputColumnCollection.Count]; for (int col = 0; col < input.InputColumnCollection.Count; col++) { inputColumnBufferIndex[col] = BufferManager.FindColumnByLineageID(input.Buffer, input.InputColumnCollection[col].LineageID); } // Get the index of the output column in the buffer: IDTSOutput90 output = ComponentMetaData.OutputCollection[0]; outputColumnBufferIndex = BufferManager.FindColumnByLineageID(input.Buffer, output.OutputColumnCollection[0].LineageID); // Get the GID web service: gidService = new GID.WS_PDF.PDFProcessService(); }
/// /// Called to process the buffer: /// Get a new GID and save it in the output column. /// /// /// public override void ProcessInput(int inputID, PipelineBuffer buffer) { if (! buffer.EndOfRowset) { try { while (buffer.NextRow()) { // Set the output column value to a new GID: buffer.SetString(outputColumnBufferIndex, gidService.getGID()); } } catch (System.Exception ex) { bool cancel = false; ComponentMetaData.FireError(0, ComponentMetaData.Name, ex.Message, string.Empty, 0, out cancel); throw new Exception("Could not process input buffer."); } } }
/// /// Called after executing, to clean up. /// public override void PostExecute() { base.PostExecute(); // Resign from the GID service: gidService = null; } } }
How do I retrieve the connections (connection managers) collections from Custom Data Flow destination? ComponentMetadata.RuntimeConnectionCollection is empty. I would like to be able to access all the connections defined in the package from the custom data flow task.
I came across code in which it was possible to access the Connections collection using the IDtsConnectionService for custom task (destination). The custom task has access to serviceProvider, whcih can be used to get access to the IDtsConnectionService interface but not the custom data flow task.
Everything I've read says that custom data flow components are built by inheriting from the Microsoft.SqlServer.Dts.Pipeline.PipelineComponent class.
But the stock components such as the Derived Column data flow transformation must each be implemented by their own class. So how do I base my custom components on those classes? The documentation for the PipelineComponent class doesn't list any such subclasses.
I've been using Konesan's FileWatcher control-flow item successfully in design-mode on my PC, which runs the package on a remote server.
I have installed the Konesan's FileWatcher on the remote SQLServer machine. I then imported the package to the server (Files System folder). I then select the package, right-click 'Run Package', then Execute, and receive the error:
"Error: The task 'File Watcher Task' cannot run on this edition of Integration Services. It requires a higher level edition"
..in the 'Package Execution Progeress' dialog. All other validation seem to be ok.
(Note, I'm executing the above steps using SQLServer Mgt Studio from my PC ; I'm not doing it from the SQLServer machine itself...not sure if this matters or not.)
The SSIS version installed on the server is 9.0.3054. It shouldn't be an "SSIS version issue", as it is the same SQLServer that I used (successfully) from my PC in design mode...
This is a question to the SSIS development team. I would like to know what are the requirements to implement custom SSIS Control Flow task in C++ . There is a documentation describing the process when implementing a managed task, but no such documentation exists for implementing a task in C++.
I need to pass a parameter from control flow to data flow. The data flow will use this parameter to get data from a Oracle source.
I have an Execute SQL task in control flow to assign value to the Parameter, next step is a data flow which will need take a parameter in the SQL statement to query the Oracle source,
The SQL Looks like this:
select * from ccst_acctsys_account
where to_char(LAST_MODIFIED_DATE, 'YYYYMMDD') >?
THe problem is the OLE DB source Edit doesn€™t have anything for mapping parameter.
I have an Execute SQL Task that returns a Full Rowset from a SQL Server table and assigns it to a variable objRecs. I connect that to a foreach container with an ADO enumerator using objRecs variable and Rows in first table mode. I defined variables and mapped them to the columns.
I tested this by placing a Script task inside the foreach container and displaying the variables in a messagebox.
Now, for each row, I want to write a record to an MS Access table and then update a column back in the original SQL Server table where I retreived data in the Execute SQL task (i have the primary key). If I drop a Data Flow Task inside my foreach container, how do I pass the variables as input to an OLE DB Destination on the Data Flow?
Also, how would I update the original source table where source.id = objRects.id?
Thank you for your assistance. I have spent the day trying to figure this out (and thought it would be simple), but I am just not getting SSIS. Sorry if this has been covered.
Dear All! My package has a Data Flow Task. In Data Flow Task, I use a Script Component and a OLE BD Destination to transform data from txt file to database. Within Data Flow Task, I want to call File System Task to move file to a folder or any Task of "Control Flow" Tab. So, Does SSIS support this task? Please show me if any Thanks
I'm currently setting variables at the package level with an ExecuteSQL task. This works fine. However, I'm now starting to think about restartability midway through a package. It would be nice to have the variable(s) needed in a data flow set within the data flow so that I only have to restart that task.
Is there a way to do that using an SQL statement as the source of the value in a data flow?
OR, when using checkpoints will it save variable settings so that they are available when the package is restarted? This would make my issue a moot point.
Hi all! I recently started working with SSIS and one of the things that is puzzling me the most is what's the best way to go:
A small control flow, with large data flow tasks A control flow with more, but smaller, data flow tasksAny help will be greatly appreciated. Thanks, Ricardo
Hi, I'm trying to implement an incremental data pull (Oracle to SQL) based on Andy's blog: http://sqlblog.com/blogs/andy_leonard/archive/2007/07/09/ssis-design-pattern-incremental-loads.aspx
My development machine is decent: 1.86 GHz, Intel core 2 CPU, 3 GB of RAM. However it seems the data flow task gets hung whenever I test the package against the ~6 million row source, as can be seen from these screenshots. I have no memory limitations on the lookup transformation. After the rows have been cached nothing happens. Memory for the dtsdebug process hovers around 1.8 GB and it uses 1-6 percent of CPU resources continuously. I am not using fast load to insert new records into my sql target table. (I am right clicking Sequence Container 3 and executing this container NOT the entire package in the screenshots)
The same package works fine against a similar test table with 150k rows. http://i248.photobucket.com/albums/gg168/boston_sql92/7.jpg http://i248.photobucket.com/albums/gg168/boston_sql92/8.jpg
The weird thing is it only takes 24 minutes for a full refresh of the entire source table from Oracle to the SQL target table. Any hints,advice would be appreciated.
I am wondering if it is possible to use SSIS to sample data set to training set and test set directly to my data mining models without saving them somewhere as occupying too much space? Really need guidance for that.
I am working on importing an Excel workbook, saved as multiple CSV flat files, that has both group level data and related detail row on the same sheet. I have been able to import the group data into a table. As part of the Data Flow task, I want to be able to save the key value for the group, which I will use when I insert the detail rows.
My Data Flow has the following components: The flat file with the data, which goes to a derived column transformation to strip out extraneous dashes, which leads to the OLEDB Destination component.
I want to save the value as a package level variable, so that I can reference it in another dataflow.
Is this possible, and if so, at what point do I save the value?
I have to extract, dayly a list of contacts on a exchange server in a table on our EDW on sql server 2005. Is it possible to get the information directly from a dataflow or i will have to developpe a script task ?
I want to export data from SQL Server2005 to an Excel spreadsheet thru "Data Flow Task". I am using OLE DB for SQL Server for the source connection and a Connection To Excel as my destination source. The Excel spreadsheet (2003) exists and has the first row with column names. I don't have any warnings before trying to execute.
While executing the tasks, I got the error Error: 0xC0202025 at Data Flow Task, Excel Destination [427]: Cannot create an OLE DB accessor. Verify that the column metadata is valid. Error: 0xC004701A at Data Flow Task, DTS.Pipeline: component "Excel Destination" (427) failed the pre-execute phase and returned error code 0xC0202025.
After analysing I found in the DataFlow --> Excel destination --> Advanced Editor for Excel Destination, the default data type for txtRemarks shows as "Unicode string [DT_WSTR]". But this is supposed to be "Unicode text stream [DT_NTEXT]". Even if I change the data type in the design time, It doesn't accept.
I need to see inside a SSIS 2012 project a new SSIS installed component, but in the SSDT 2010 I cannot see the SSIS Data Flow Items tab for adding data source/data destination respect to the choose toolbox items pane.
Hi, all experts here, Do we always have to use SCD component for the loading of data into data warehouse to handle changes of rows? I am looking forward to hearing from you and thank you very much in advance for your help. With best regards,
I need to call a stored procedure to insert data into a table in SQL Server from SSIS data flow task. I am currently trying to use OLe Db Destination, but I am not sure how to map inputs to OLE DB Destination to my stored procedure insert. Thanks
