Custom Data Flow Transformation Loosing CustomProperties
May 12, 2006
I created a custom transform that has a custom interface and is a wizard that uses a web service. It creates custom properties and output columns on the fly. I set the dialog result to Ok and close at the end of the steps. The transform then has the custom fields and output columns I created in the wizard. I've verified this by right clicking on the transform and going to the advanced editor. If I then immediately run the package, the custom fields don't exist in the CustomPropertiesCollection. If I close the package and reopen it, the properties now are gone. If I then go through the wizard again, thus recreating the properties, they stay and don't disappear. The quickest way to get a working transform is to add it to my data flow then save, close and reopen the package and then go through the wizard. Just saving after I add the transform does not help.
Does anyone know what might be causing this very strange problem?
View 7 Replies
ADVERTISEMENT
Sep 18, 2006
Hi,
I'm creating a custom data flow transformation in c#.
I would like to use expressions within this component in the same way as in the derived column component: specifying the expression as a custom property of an output column, then evaluating this expression for each row of the buffer and using this evaluated expression to populate my output column values.
So I've added an custom expression on my output column, and set its expression type to CPET_NOTIFY
IDTSCustomProperty90 exp = col.CustomPropertyCollection.New();
exp.Name = "Expression";
exp.ExpressionType = DTSCustomPropertyExpressionType.CPET_NOTIFY;
But in the ProcessInput method I don't manage to get the evaluated expressions, when I use exp.Value I get my expression definition and not its evaluation.
Is there a way to get these evaluated expressions ?
Thanks,
Stéphane
View 6 Replies
View Related
May 16, 2008
Hi,
I've created my own custom data flow transformation task (using C#) that
will parse a fullname and output the various name parts. In the
ProvideComponentProperties method, I create 5 output columns (prefix, first, middle,
last, and suffix). In the ProcessInput method, I parse the input and add the
name parts to the buffer. The bad thing is that I€™m making an assumption on
the position of the Full Name input column within the buffer.
I would like the €œuser€? to be able to map their "full name" input column to a known Full Name column so I don€™t have to make any assumptions. This is the first
SSIS task I€™ve tried to create and I haven€™t been able to find very many
examples online.
Any help is greatly appreciated!
Thank you,
Marshall
View 1 Replies
View Related
Aug 30, 2006
I've built a simple custom data flow transformation component following the Hands On Lab (http://www.microsoft.com/downloads/details.aspx?familyid=1C2A7DD2-3EC3-4641-9407-A5A337BEA7D3&displaylang=en) and the Books Online (ms-help://MS.MSDNQTR.v80.en/MS.MSDN.v80/MS.SQL.v2005.en/dtsref9/html/adc70cc5-f79c-4bb6-8387-f0f2cdfaad11.htm and ms-help://MS.MSDNQTR.v80.en/MS.MSDN.v80/MS.SQL.v2005.en/dtsref9/html/b694d21f-9919-402d-9192-666c6449b0b7.htm).
All it is supposed to do is create an output column and set its value to the result of calling a web service method (the transformation is synchronous). Everything seems fine, but when I run the data flow task that contains it, it doesn't generate any output. The Visual Studio debugger displays it as yellow, with 1,385 rows going into it, but the data viewer attached to its output is empty. The output metadata looks just like I expect: all of my input columns plus the new column, correctly typed. No validation or run-time warnings or errors are reported.
I'll include the entire C# file below, which only overrrides the ProvideComponentProperties, Validate, PreExecute, ProcessInput, and PostExecute methods of the parent PipelineComponent class.
Since this is effectively a specialization of the DerivedColumn transformation, could I inherit from the class that implements the DC component instead of PipelineComponent? How do I even find out what that class is?
Thanks! Here's the code:
using System;
// using System.Collections.Generic;
// using System.Text;
using Microsoft.SqlServer.Dts.Pipeline;
using Microsoft.SqlServer.Dts.Pipeline.Wrapper;
using Microsoft.SqlServer.Dts.Runtime.Wrapper;
namespace CustomComponents
{
[DtsPipelineComponent(DisplayName = "GID", ComponentType = ComponentType.Transform)]
public class GidComponent : PipelineComponent
{
///
/// Column indexes for faster processing.
///
private int[] inputColumnBufferIndex;
private int outputColumnBufferIndex;
///
/// The GID web service.
///
private GID.WS_PDF.PDFProcessService gidService = null;
///
/// Called to initialize/reset the component.
///
public override void ProvideComponentProperties()
{
base.ProvideComponentProperties();
// Remove any existing metadata:
base.RemoveAllInputsOutputsAndCustomProperties();
// Create the input and the output:
IDTSInput90 input = this.ComponentMetaData.InputCollection.New();
input.Name = "Input";
IDTSOutput90 output = this.ComponentMetaData.OutputCollection.New();
output.Name = "Output";
// The output is synchronous with the input:
output.SynchronousInputID = input.ID;
// Create the GID output column (16-character Unicode string):
IDTSOutputColumn90 outputColumn = output.OutputColumnCollection.New();
outputColumn.Name = "GID";
outputColumn.SetDataTypeProperties(Microsoft.SqlServer.Dts.Runtime.Wrapper.DataType.DT_WSTR, 16, 0, 0, 0);
}
///
/// Only 1 input and 1 output with 1 column is supported.
///
///
public override DTSValidationStatus Validate()
{
bool cancel = false;
DTSValidationStatus status = base.Validate();
if (status == DTSValidationStatus.VS_ISVALID)
{
// The input and output are created above and should be exactly as specified
// (unless someone manually edited the persisted XML):
if (ComponentMetaData.InputCollection.Count != 1)
{
this.ComponentMetaData.FireError(0, ComponentMetaData.Name,
"Invalid metadata: component accepts 1 Input.",
string.Empty, 0, out cancel);
status = DTSValidationStatus.VS_ISCORRUPT;
}
else if (ComponentMetaData.OutputCollection.Count != 1)
{
this.ComponentMetaData.FireError(0, ComponentMetaData.Name,
"Invalid metadata: component provides 1 Output.",
string.Empty, 0, out cancel);
status = DTSValidationStatus.VS_ISCORRUPT;
}
else if (ComponentMetaData.OutputCollection[0].OutputColumnCollection.Count != 1)
{
this.ComponentMetaData.FireError(0, ComponentMetaData.Name,
"Invalid metadata: component Output must be 1 column.",
string.Empty, 0, out cancel);
status = DTSValidationStatus.VS_ISCORRUPT;
}
// And the output column should be a Unicode string:
else if ((ComponentMetaData.OutputCollection[0].OutputColumnCollection[0].DataType != DataType.DT_WSTR) ||
(ComponentMetaData.OutputCollection[0].OutputColumnCollection[0].Length != 16))
{
ComponentMetaData.FireError(0, ComponentMetaData.Name,
"Invalid metadata: component Output column data type must be (DT_WSTR, 16).",
string.Empty, 0, out cancel);
status = DTSValidationStatus.VS_ISBROKEN;
}
}
return status;
}
///
/// Called before executing, to cache the buffer column indexes.
///
public override void PreExecute()
{
base.PreExecute();
// Get the index of each input column in the buffer:
IDTSInput90 input = ComponentMetaData.InputCollection[0];
inputColumnBufferIndex = new int[input.InputColumnCollection.Count];
for (int col = 0; col < input.InputColumnCollection.Count; col++)
{
inputColumnBufferIndex[col] = BufferManager.FindColumnByLineageID(input.Buffer, input.InputColumnCollection[col].LineageID);
}
// Get the index of the output column in the buffer:
IDTSOutput90 output = ComponentMetaData.OutputCollection[0];
outputColumnBufferIndex = BufferManager.FindColumnByLineageID(input.Buffer, output.OutputColumnCollection[0].LineageID);
// Get the GID web service:
gidService = new GID.WS_PDF.PDFProcessService();
}
///
/// Called to process the buffer:
/// Get a new GID and save it in the output column.
///
///
///
public override void ProcessInput(int inputID, PipelineBuffer buffer)
{
if (! buffer.EndOfRowset)
{
try
{
while (buffer.NextRow())
{
// Set the output column value to a new GID:
buffer.SetString(outputColumnBufferIndex, gidService.getGID());
}
}
catch (System.Exception ex)
{
bool cancel = false;
ComponentMetaData.FireError(0, ComponentMetaData.Name, ex.Message, string.Empty, 0, out cancel);
throw new Exception("Could not process input buffer.");
}
}
}
///
/// Called after executing, to clean up.
///
public override void PostExecute()
{
base.PostExecute();
// Resign from the GID service:
gidService = null;
}
}
}
View 1 Replies
View Related
Aug 29, 2007
Hello,
Is it possible to use existing data flow components (Merge Join, aggregation,...) in a custom data flow component?
Thanks,
Yoann
View 15 Replies
View Related
Aug 14, 2007
Hi,
I've created a Custom Data Flow Component and added some Custom Properties.
I want the user to set the contents using an expression. I did some research and come up with the folowing:
Code Snippet
IDTSCustomProperty90 SourceTableProperty = ComponentMetaData.CustomPropertyCollection.New();
SourceTableProperty.ExpressionType = DTSCustomPropertyExpressionType.CPET_NOTIFY;
SourceTableProperty.Name = "SourceTable";
But it doesn't work, if I enter @[System:ackageName] in the field. It comes out "@[System:ackageName]" instead of the actual package name.
I'm also unable to find how I can tell the designer to show the Expression editor. I would like to see the elipses (...) next to my field.
Any help would be greatly appreciated!
Thank you
View 6 Replies
View Related
Apr 2, 2007
Hi,
I'm trying to enable Expression for a custom property in my custom data flow component.
Here is the code I wrote to declare the custom property:
public override void ProvideComponentProperties()
{
ComponentMetaData.RuntimeConnectionCollection.RemoveAll();
RemoveAllInputsOutputsAndCustomProperties();
IDTSCustomProperty90 prop = ComponentMetaData.CustomPropertyCollection.New();
prop.Name = "MyProperty";
prop.Description = "My property description";
prop.Value = string.Empty;
prop.ExpressionType = DTSCustomPropertyExpressionType.CPET_NOTIFY;
...
}
In design mode, I can assign an expression to my custom property, but it get evaluated in design mode and not in runtime
Here is my expression (a file name based on a date contained in a user variable):
"DB" + (DT_WSTR, 4)YEAR( @[User::varCurrentDate] ) + RIGHT( "0" + (DT_WSTR, 2)MONTH( @[User::varCurrentDate] ), 2 ) + "\" + (DT_WSTR, 4)YEAR( @[User::varCurrentDate] ) + RIGHT( "0" + (DT_WSTR, 2)MONTH( @[User::varCurrentDate] ), 2 ) + ".VER"
@[User::varCurrentDate] is a DateTime variable and is assign to 0 at design time
So the expression is evaluated as: "DB189912189912.VER".
My package contains 2 data flow.
At runtime,
The first one is responsible to set a valid date in @[User::varCurrentDate] variable. (the date is 2007-01-15)
The second one contains my custom data flow component with my custom property that was set to an expression at design time
When my component get executed, my custom property value is still "DB189912189912.VER" and I expected "DB200701200701.VER"
Any idea ?
View 5 Replies
View Related
Dec 28, 2007
Hi,
I'm trying to implement an incremental data pull (Oracle to SQL) based on Andy's blog:
http://sqlblog.com/blogs/andy_leonard/archive/2007/07/09/ssis-design-pattern-incremental-loads.aspx
My development machine is decent: 1.86 GHz, Intel core 2 CPU, 3 GB of RAM.
However it seems the data flow task gets hung whenever I test the package against the ~6 million row source, as can be seen from these screenshots. I have no memory limitations on the lookup transformation. After the rows have been cached nothing happens. Memory for the dtsdebug process hovers around 1.8 GB and it uses 1-6 percent of CPU resources continuously. I am not using fast load to insert new records into my sql target table. (I am right clicking Sequence Container 3 and executing this container NOT the entire package in the screenshots)
http://i248.photobucket.com/albums/gg168/boston_sql92/1.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/2.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/3.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/4.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/5.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/6.jpg
The same package works fine against a similar test table with 150k rows.
http://i248.photobucket.com/albums/gg168/boston_sql92/7.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/8.jpg
The weird thing is it only takes 24 minutes for a full refresh of the entire source table from Oracle to the SQL target table.
Any hints,advice would be appreciated.
View 18 Replies
View Related
Dec 20, 2006
I am trying to use a CTE in an OLE DB Command data flow transformation object. However, when I enter the cte and corresponding query in the SqlCommand field of the OLE DB command editor dialog, I get a syntax error. Can CTE's be used data flow objects? I have been able to use them in an Execute SQL Control Flow Item, but not in any data flow item.
View 7 Replies
View Related
Nov 8, 2007
Hi,
I have one data flow control. Source is SQL server and destination is flat file destination. I have one derived column placed in between these two. This functionality works fine. I would like to sum one column data and count total no. of columns and put it in global variable. How can I achieve it?
Thanks,
View 7 Replies
View Related
May 11, 2007
Using SSIS to import from Excel to SQL Server.
In Excel they are showing Sale as -ve quantity and purchase as +ve quantity.
The database has quantity always as +ve figure and a separate column "isPurchase" set to true or false depending on whether purchase or sale.
So I need Derived Column to return a bolean (or int) depending whether quantity is positive or negative. I tried each of the following in the Expression but all of them were invalid expressions.
CASE WHEN [TotalQuantity] > 0 THEN 0 ELSE 1 END
If [TotalQuantity] > 0 THEN 1 ELSE 0 END
IIF ([TotalQuantity] > 0, 1,0)
Can anyone help me with correct syntax, or correct Data Flow Transformation if Derived column is wrong.
Thanks
Richard
View 3 Replies
View Related
Feb 19, 2008
Hello Helpers,
I need to know how to use my private function - created as a scalar-valued-function in SQL Server 2005 - in script component (here a transformation is used) in a data flow task to transform a two-digit-month into a tree-sign-month:
Example: '01' should be transformed into 'Jan'
Many thanks for alle your commitment and help!
Ulrike
View 4 Replies
View Related
May 1, 2008
Hi,
I have Variable , data source and conditional transformation which checks the count(*) if the count == 0 then I connect an script component and change variable to false(initial it is True) and write into a log file...
Then I check that variable on predence constarint at workflow if variable==True then success. BUT
Whenever I run the package my dataflow gets green even the condition does not meet like count==0 . So
my variable's value is "False". Actually if the condition doesnt meet then my script shouldnt work.
Am I missing something???
View 7 Replies
View Related
Mar 31, 2008
The logic I am trying to recreate via SSIS is the following SQL statement:
insert into db3.dbo.targettable1 -- Target database table
(SiteC,
Objecte,
Attrib1)
select distinct ?,
?,
from ? -- Source database table
join dbo.targettable2 c1 -- Target database table
on c1.Alias = ? and
c1.CSetID = ? and
c1.FacID = (select f.PFacID
from dbo.Fac f
where f.FacID = ?)
where not exists (select * from dbo.targettable2 c -- Target database table
where c.Alias = ? and
c.FacID = ? and
c.CSetID = ?)
I have an OLE DB Source that consists of an expression to approximate the following portion of the Above Select statement:
Select ?,
from ? -- Source database table and
The package has 2 global variables User:CSetID and User::FacID whose scope is global to the package and whose values are set within a Foreach Loop Container outside of the Data Flow Task
I was trying to reference the 2 global variables within the Looup Transformation to recreate the following portion of the SQL statement.but encounter errors:
join dbo.targettable2 c1 -- Target database table
on c1.Alias = ? and
c1.CSetID = ? and
c1.FacID = (select f.PFacID
from dbo.Fac f
where f.FacID = ?)
In the Advanced Editor window of Lookup Transaction
select * from
(select * from [dbo].[targettable2 ]) as refTable
where [refTable].[Alias] = ? and [refTable].[FacID] = ? and
[refTable].[CSetID] = ?
Is there away to reference global variables in a Lookup Transformation that are set outside a Data Task Flow?
View 3 Replies
View Related
Apr 9, 2008
Hello,
I have developed some packages to load data into "Fact" tables in the data warehouse.
Some packages are OK, other ones not. What is the problem?: some packages load fact tables with lots of "Lookup - Data Flow Transformation" into the "data flow task" (lookup against dimension tables) but they are very very slow, too much slow to be choosen as a solution.
Do you have any other solutions to avoid using "Lookup - Data Flow Transformation"? Any other solution (SSIS, TSQL and so on....) is welcome to speed up the Fact table loading process.
Thank in advance
View 7 Replies
View Related
Mar 26, 2007
To all the SSIS gurus,
I have a situation where I have multiple source tables, I need to populate the destination tables that have the same schema as the source ones. I dont want to do the repetitive task of creating a Dataflow for each source-destination load.
I want to create one custom dataflow component and loop through all my source tables and provide destination tables dynamically.
Is there a way to do that? Any custom data flow component out there??
Your ideas are greatly appreciated.
Regards,
View 5 Replies
View Related
Mar 8, 2007
Hi,
I am creating a custom transformation component, and a custom user interface for that component.
In
my custom UI, I want to show the custom properties, and allow users to
edit these properties similar to how the advanced editor shows the
properties.
I know in my UI I need to create a "Property Grid".
In
the properties of this grid, I can select the object I want to display
data for, however, the only objects that appear are the objects that I
have already created within this UI, and not the actual component
object with the custom properties.
How do I go about getting the properties for my transformation component listed in this property grid?
I am writing in C#.
View 5 Replies
View Related
May 19, 2007
I'm trying to create a custom data flow destination, and it has a custom property that needs to get value from variable(similar to the FileNameVariable property of Raw File Destination), how can I do that?
View 5 Replies
View Related
Mar 29, 2007
I've been having an issue with the integration of a third-party DLL into a custom data flow component.
The company sent me a C# project that generates a simple console application. The project includes a class that calls their DLL with DllImport. The console application runs fine.
I created a stand-alone class using the C# class they sent to expose the methods of their DLL. In my custom component, I'm referencing this class to pass data to and from their DLL.
The first method from that stand-alone class that my component encounters simply gets their installation path from the registry and does not use DllImport. That path retrieval works fine. The next method calls a function that is declared with DllImport. Each time the call fails with "System.DllNotFoundException = {"Unable to load DLL AMZip.dll': Exception from HRESULT: 0xE06D7363"}".
I've copied this DLL to countless locations (e.g., the PipelineComponents directory, the project/solution bin directory) and included these paths in all manner of path variables.
What am I missing here? Their DLL is not strong named (does this matter since I'm using DllImport?), my stand-alone class is, and of course, the custom component itself is. I appreciate the help.
View 9 Replies
View Related
Feb 7, 2007
Hi,
I'm having my first go at developing a destination adapter which will send data to an update Web Service.
I've got some rather big gaps in my understanding. I've been following the various samples I've found on the net and have validated my mapping and picked up all the available column names and datatypes which are appearing in the Input and Output Properties tab of the Advanced Editor but I only have a tab for "Input Columns" and not "Column Mappings".
Which method defines the availble columns for the user to map?
Let me know if I haven't given enough information.
cheers
View 1 Replies
View Related
May 15, 2006
I implemented a custom source adaptor. I want to be able to associate custom properties with each of the output columns. I want them to be passed downsteam. The idea is to be able to retrieve these information in a downstream custom transformations of ours and process the various columns accordingly. How do I go about doing this?I noticed that the IDTSCustomProperty90 seems to have a local scope only.
View 1 Replies
View Related
Jan 17, 2007
Hi,
I developed a custom data flow task in .net 2.0 using Visual Studio 2005. I installed it into GAC using GACUTIL and also copied it into the pipeline directory. This task runs absolutely fine when I run it on my local machine both in BIDS and using the script in windows 2000 environment. However, when I deployed this package into a windows 2003 server, the package fails at the custom task level. I checked the GAC in windowsassembly directory and it is present. Also I copied the file into the PipeLine directory and verified that I copied it into the correct pipeline directory by checking the registry. The version of the assembly is still Debug. I looked up documentation in MSDN but there is very little information about the errors I am seeing.
The error I get is pasted below, Can somebody please help me as I am currently stuck and running out of ideas to fix this problem.
Code: 0xC0047067
Source: DFT Raw File DFT Raw File (DTS.Pipeline)
Description: The "component "_" (2546)" failed to cache the component metadata object and returned error code 0x80131600.
Code: 0xC004706C
Source: DFT Raw File DFT Raw File (DTS.Pipeline)
Description: Component "component "_" (2546)" could not be created and returned error code 0xC0047067. Make sure that the component is registered correctly.
View 6 Replies
View Related
Jun 27, 2007
Hi all,
I am creating a customer data flow component for SSIS for use in a package. I've got some custom properties that I am exposing using the supplied advanced editor (no custom property editor here).
Some of my properties are enumerated types, and I have deciphered how to get those properties to show as dropdown lists of their respective enumerations. (For those of you who may be looking as hard as I did as to how to accomplish this, see the end of this post.)
I also have a few properties which request SSIS package variable names - such as an file name variable. However, I can't figure out how to tell the advanced editor that the property is looking for an SSIS variable, so that it can show a dropdown list of package variables, much like virtually any other Microsoft supplied Data Flow component can.
Is there a Type Converter I could specify for those custom properties? Is there another way to instruct SSIS that my custom property is expecting a variable? Or do I need to code a custom UI for editing my Data Flow Task?
To create a dropdown list of values for a custom property that represents an enum, do the following:
1. Create your enum definition, such as "public enum ThisIsMyEnum { one, two }"
2. Create a new class that inherits from TypeConverter, such as "public class MyEnumConverter : TypeConverter"
3. Override "CanConvertFrom", and return true if "sourceType == typeof(string)"
4. Override "CanConvertTo", and return true if "destinationType == typeof(string)"
5. Override "ConvertFrom", and return the enum value (such as "one" or "two" in my example) that corresponds to the string passed in the parameter "value"
6. Override "ConvertTo", and return a string that corresponds to the enum value passed in the parameter "value"
7. Override "GetStandardValuesSupported" and return true
8. Override "GetStandarValuesExclusive" and return true to indicate that ONLY the enum values should be accepted
9. Override "GetStandardValues", and return a new StandardValuesCollection constructed with Enum.GetValues() of your enum, such as "return new StandardValuesCollection(Enum.GetValues(typeof(ThisIsMyEnum)));"
10. Just above your "public enum" declaration, add a "TypeConverter" attribute to link your type converter to your enum, such as "[TypeConverter(typeof(MyEnumConverter))]"
11. In "ProvideComponentProperties", after you've created your custom property like this: "IDTSCustomProperty90 propEnum = ComponentMetaData.CustomPropertyCollection.New()", add another line to specify the TypeConverter property of the property to the full assembly name of your type converter, like so: "propEnum.TypeConverter = typeof(MyEnumConverter).AssemblyQualifiedName;"
View 11 Replies
View Related
May 16, 2008
Hi,
How do I retrieve the connections (connection managers) collections from Custom Data Flow destination? ComponentMetadata.RuntimeConnectionCollection is empty. I would like to be able to access all the connections defined in the package from the custom data flow task.
I came across code in which it was possible to access the Connections collection using the IDtsConnectionService for custom task (destination). The custom task has access to serviceProvider, whcih can be used to get access to the IDtsConnectionService interface but not the custom data flow task.
Any help appreciated.
Thanks
Naveen
View 5 Replies
View Related
Feb 15, 2007
Hi,
I'm having trouble with a Script Component in a data flow task. I have code that does a SqlCommand.ExecuteReader() call that throws an 'Object reference not set to an instance of an object' error. Thing is, the SqlCommand.ExecuteReader() call is already inside a Try..Catch block. Essentially I have two questions regarding this error:
a) Why doesn't my Catch block catch the exception?
b) I've made sure that my SqlCommand object and the SqlConnection property that it uses are properly instantiated, and the query is correct. Any ideas on why it is throwing that exception?
Hope someone could help.
View 3 Replies
View Related
Sep 7, 2006
Everything I've read says that custom data flow components are built by inheriting from the Microsoft.SqlServer.Dts.Pipeline.PipelineComponent class.
But the stock components such as the Derived Column data flow transformation must each be implemented by their own class. So how do I base my custom components on those classes? The documentation for the PipelineComponent class doesn't list any such subclasses.
View 1 Replies
View Related
May 19, 2008
Dear All,
I have a table A with a KEY column and SSN column.
KEY = 12 digits ( first 3 digits are Department Id , and last 9 digits are SSN)
I have a table B with SSN column only.
both KEY and SSN columns are Primary keys so duplicate entries must be Avoided.
Table A is intended to be popluated weekly from TXT file (SSIS package RUN). I want to achieve somethign like this..!
P-Code sample:
for each Row in TXT file
if TXTfile.KEY = TableA.KEY then
skip and Read/Go to next Row in TXT file
else
INSERT TXTfile.KEY into TABLEA.KEY
SSN_Var = EXTRACT the SSN part (SSNpart.READ)
if SSN_VAR.Exists In TableB.AnyRow then
skip
else
Insert into TableB
End If.
End If
End For Loop.
-----------------------------------------------------------------
Using SSIS controls, what will be best flow and logic to achieve this.....?
any sample scripting code ????
Many Thanks.
View 9 Replies
View Related
Jun 18, 2007
I have created a simple package that uses a sql command to pull data from an oracle database and inserts the data into a sql 2005 table. Some of the data fields that i am pulling from contain two digits after the decimal point, however this data is lost when it gets into sql. I have even tried putting the data into a flat file, and still the data is lost.
In the package I have a ole db source connection which is the oracle database and when i do the preview i see all the data I need. I am very confused and tried a number of things to get the data into sql, but none work. Any ideas would be very helpful.
thanks
View 6 Replies
View Related
May 27, 2008
I've been trying to figure this out on my own for pretty much all of today, and part of last week. I've downloaded samples, searched this forum, blogs, etc. So I figured I would post, since it's the end of the day, and I'm not much further along.
I'm working on a custom transformation component, whose main function is to use SQL encryption/decryption to encrypt/decrypt data from the input columns, into the output columns. The component needs two strings, a key name and a certificate name, as well as the connection manager it should use to connect to SQL which will do the encryption/decryption.
Here's where I'm stuck:
1) How can I provide the key/certificate names via properties? What I'm expecting/looking for is a way to add these two properties at the component-level, which would show up under the "Custom Properties" section of the properties pane (currently, this only has one property, "UserComponentTypeName"). These key/certificate values will be used for all input columns.
2) How do I access the connection managers from within the component? What is the best way to go about using a connection manager from within my component to connect to SQL and perform the encryption/decryption? In a custom task, this was fairly simple, but it seems that same concept won't work on a transformation component.
3) Is there a better way to go about accomplishing this (column encryption via SQL from within SSIS)? Am I going about this all wrong?
As I said, I've searched for direction, but there seems to be next to nothing in the regards of a good reference for creating custom transformation components. I've looked at two MS samples, but can't seem to make any sense out of them.
Thanks in advance.
Jerad
View 3 Replies
View Related
Aug 14, 2007
Hi all,
Is there any tutorial to learn how custom transformation component works? maybe a blog, pdf or something...
Specifically, i need to learn how to generate an output column composed from 3 input columns. The problem is i dont know how to set the column value... anyone have some sample code?
Thanks!
View 6 Replies
View Related
Nov 27, 2006
I've created a custom data flow tranformation and it isn't showing up in the Tool Box Items to be added under the Data Flow Items tab (right click on tool box, 'Choose Items...', then clicked Data Flow Items).
I have done the following:
signed the assembly,
added to GAC,
copied the dll to C:Program FilesMicrosoft SQL Server90DTSPipelineComponents.
It worked previously when I was just starting out, however now I cannot see it. What would cause it to not show up? Everything compiles fine. How would I determine how to fix it so that it shows up?
View 1 Replies
View Related
Apr 10, 2006
Microsoft published a "Creating a custom transformation component Walkthrough" published on
http://www.microsoft.com/downloads/details.aspx?FamilyID=1c2a7dd2-3ec3-4641-9407-a5a337bea7d3&DisplayLang=en
Does anyone know where to get the Hands-On Lab Files mentioned?
Thanks
Alex
View 4 Replies
View Related
Mar 26, 2002
hi Everybody,
for some reason my Sql Server has stopped and i am not able to restart it at all, do i have to reinstall the complete SQl Software or is there ne way i can start the MSSQL Server
View 1 Replies
View Related
