Custom Stored Procs: Determining Source Table Name
Jan 17, 2006
Hello all ...
I'm looking at writing some customized insert, update and delete stored procs for a replication target. For various reasons I would like to write a "one size fits all" custom stored proc for each of these tasks.
It looks like I can get the data values passed as parameters just fine.
I was wondering if there's a way to also pass the source schema and table name as parameters, or to determine these on the fly in my all purpose stored procs. Some replication products refer to these types of values as "tokens" that can be included in the replication data stream sent to the target.
I can adjust the source database replication publications, and article definitions, but I cannot modify the actual source database tables to include these as values in data columns. It is possible a view that contains these elements as strings might fly, but I was hoping to avoid cluttering the source database.
A handy trick or technique would be helpful!
Thanks!
DB
View 3 Replies
ADVERTISEMENT
Sep 25, 2000
Hi,
Any pros and cons of putting sprocs into Source Safe?
Thanks,
Judith
View 2 Replies
View Related
Jan 15, 2008
Is there a way to namespace groups of stored procs to reduce confusion when using them?
For C# you can have ProjectName.ProjectSection.Classname when naming a class. I am just wondering if there is a way to do the same with SQL stored procs. I know Oracle has packages and the name of the package provides a namespace for all of the stored procs inside it.
View 1 Replies
View Related
Feb 13, 2007
Hi,
I am trying to create a program that transfers tables to flat files.
At this point in time, I have suceeded in created one that creates delimited files.
However, I am now trying to create fixed-width files as you can do with the SSIS designer, but programatically.
Is there a way to programatically determine the width of a column from the source table? I can not seem to find any kind of function or member that stores this information or allows me to retrieve it.
I know what I need to change in order to set a width for a column, but I just don't know how to find the width without just asking the user to provide one.
View 5 Replies
View Related
Sep 8, 2006
I need to run stored procs based on a list in a code table. In other words, it reads the name of a stored proc from a table and runs it and does this for all the rows in the table. I think the ForEach loop container will do what I need and there is an ADO enumerator option but the documentation does not tell you how to use this. From what I can tell, you need to get a dataset into an SSIS variable first and then you plug the variable name into the ForEach ADO enumerator. Is that correct? If so, can someone tell me how to get a dataset into a variable?
Thanks
View 1 Replies
View Related
Dec 4, 2007
I'm attempting to iterate package components of a package created in the SSIS designer, but have run into a problem identifying the DataReader Source managed component.
For instance, if iterating the dataflow task components like so:
Application app = new Application();
MainPipe pipe = taskHost.InnerObject as MainPipe;
foreach (IDTSComponentMetaData90 component in pipe.ComponentMetaDataCollection)
{
if (component.ComponentClassID == app.PiplineComponentInfos["DataReader Source"].ID)
{
// THIS IS NEVER REACHED
}
}
The ComponentClassID of the component is a GUID, but the PipelineComponentInfo.ID AND PipelineComponentInfo.CreationName are both the fully qualified assembly name of the data reader source adapter, which is:
"Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter, Microsoft.SqlServer.ADONETSrc, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91"
From reading another post i attempted to get the ProgID of the component from the class ID (ole32 ProgIDfromCLSID) but that only yields a ProgID of DTS.ManagedComponentWrapper.1
How can I properly identify this type of dataflow component?
I am running SQL Server SP2 (Developer Edition) on XP Pro SP2.
View 6 Replies
View Related
Mar 20, 2006
SQL Server 2000 Enterprise
Hello,
I have a test publication of two tables. Both tables are supposed to use a custom update stored procedure
(you know, "Replace UPDATE commands with this stored procedure call:")
When updating Table1 the system calls my custom stored stored procedure.
Here is a small excerpt captured by the Profiler when updating Table1:
exec usp_FNLC_MSupd_Table1 'Jun 24 2005 12:00:00:000AM', NULL, 100081142, 0x01
Looks good. I see that my custom update proc was used (usp_FNLC_MSupd_Table1).
Now, when updating Table2 (Table2 is pretty identical to Table1) Profiler sends this back and the update on the subscriber fails:
exec sp_executesql N'delete from "Table2" where "Dates3ID" = @P1 insert into "Table2" values (@P2, @P3) ', N'@P1 int,@P2 int,@P3 datetime', 8, 8, 'Mar 24 2006 12:00:00:000AM'
Then..
exec sp_executesql N'insert into "Table1" values (@P1, @P2) ', N'@P1 int,@P2 datetime', 8, 'Mar 24 2006 12:00:00:000AM'
Go
This is what the distribution agent throws back:
Insert Error: Column name or number of supplied values does not match table definition.
(Source: DFBPBSO (Data source); Error number: 213)
So, why isn't the article Table2 using my custom update proc? All I do is updates, no deletes or inserts. No matter what I do for this article, it will not use the custom update proc.
I need help, please. Thank you in advance,
L
View 3 Replies
View Related
Oct 12, 2004
SQL Server 2000:
Question 1
If you drop / rename a table and then recreate the table with the SAME NAME, what impact does it have on stored procedures that use these tables? From a system perspective, do you have to rebuild / recompile ALL the stored procedures that use this table?
I had a discussion with someone that said that this is a good idea, since the IDs of the tables change in sysobjects and from a SQL SERVER query plan perspective, this needs to be done...
Question 2
If you Truncate a Table as part of a BEGIN TRANSACTION, what happens if an error occurs? Will it Rollback? The theory is that it won't because Truncate doesn't utilize the logs where as Delete From uses the SQL Logs?
Thanks!
View 1 Replies
View Related
Jun 13, 2007
Hello. I was using the new sys.dm_db_index_operational_stats function which is nice for seeing counts of insert/update/delete actions per table index, bla bla bla... Anyways, question, can I do the same thing with Profiler? meaning, can I trace stored procs and sopmehow see the proc exec WITH each table it does actions against? Not talking about filtering on table names in the text, talking I just want to run an application, which uses all stored procs, and see every table used by that execution of the proc, and also the number of rows inserted,updated,deleted.... If so, which Profiler events/columns must I flick on to gather that? Thanks, Bruce
View 4 Replies
View Related
Jan 9, 2005
I have 1 table with a huge amount of data that I recive from someone else in a flat file format. I want to be able to filter through that data and scrub it and find out the good data and bad data from it.
I'm scrubbing the data using different stored procs that i've created and through a web interface that the user can pick which records they wish to create.
If I were to create a new table for clean records, what is the syntax to keep Appending to that table through the data that i'm obtainig via the stored procs that i've created.
Any thoughts or suggestions are greatly appriciated in advance
Thanks again in advance
RB
View 1 Replies
View Related
May 7, 2004
HI,
CREATE PROCEDURE PROC1
AS
BEGIN
SELECT A.INTCUSTOMERID,A.CHREMAIL,B.INTPREFERENCEID,C.CHR PREFERENCEDESC
FROM CUSTOMER A
INNER JOIN CUSTOMERPREFERENCE B
ON A.INTCUSTOMERID = B.INTCUSTOMERID
INNER JOIN TMPREFERENCE C
ON B.INTPREFERENCEID = C.INTPREFERENCEID
WHERE B.INTPREFERENCEID IN (6,7,2,3,12,10)
ORDER BY B.INTCUSTOMERID
END
IF I AM USING THIS PROC AS I/P TO ANOTHER PROC THEN IT GIVES NO PROBLEM AS I CAN USE ?
CREATE PROCEDURE PROC2
AS
BEGIN
CREATE TABLE #SAATHI(INTCUSTOMERID INT,CHREMAIL NVARCHAR(60),INTPREFERENCEID INT,CHRPREFERENCEDESC NVARCHAR(50))
INSERT INTO #SAATHI
EXEC PROC1
ST......1,
ST......2,
END.
BUT IF , I USE ANOTHER PROC SIMILAR TO THE FIRST ONE WHICH GIVES SLIGHTLY DIFFERENT RESULTS AND GIVES TWO SETS OF RESULTS,THEN WE HAVE A PROBLEM,HO TO SOLVE THIS :-
CREATE PROCEDURE MY_PROC
AS
BEGIN
SELECT A.INTCUSTOMERID,A.CHREMAIL,B.INTPREFERENCEID,C.CHR PREFERENCEDESC
FROM CUSTOMER A
INNER JOIN CUSTOMERPREFERENCE B
ON A.INTCUSTOMERID = B.INTCUSTOMERID
INNER JOIN TMPREFERENCE C
ON B.INTPREFERENCEID = C.INTPREFERENCEID
WHERE B.INTPREFERENCEID IN (23,12,10)
ORDER BY B.INTCUSTOMERID
END
SELECT A.INTCUSTOMERID,MAX(case when A.intpreferenceid = 23 then '1'
else '0' end) +
MAX(case when A.intpreferenceid = 12 then '1'
else '0' end) +
MAX(case when A.intpreferenceid = 10 then '1'
else '0' end) AS PREFER
FROM CUSTOMER
GROUP BY A.INTCUSTOMERID
ORDER BY A.INTCUSTOMERID
END
WHICH NOW GIVES ME TWO SETS OF DATA , BOTH REQUIRED THEN HOW TO USE ONE SET OF RESULTS AS I/P TO ANOTHER PROC AND OTHER SET OF RESULTS AS I/P TO YET ANOTHER PROC .
CREATE PROCEDURE PROC2
AS
BEGIN
CREATE TABLE #SAATHI(INTCUSTOMERID INT,CHREMAIL NVARCHAR(60),INTPREFERENCEID INT,CHRPREFERENCEDESC NVARCHAR(50))
INSERT INTO #SAATHI
EXEC MY_PROC
ST......1,
ST......2,
END.
BUT, HERE I WANT TO USE FIRST DATASET ONLY , HOW TO USE IT ?
THANKS.
View 4 Replies
View Related
Jul 20, 2005
Hey,I'm writing some automated unit tests for a database app. The appcreates a database via script. I'm developing the system in atest-driven manner and need a way to determine if a parameter existswithin a stored procedure using SQL. Any ideas?Thanks,WillJoin Bytes!
View 3 Replies
View Related
Apr 29, 2008
How do I search for and print all stored procedure names in a particular database? I can use the following query to search and print out all table names in a database. I just need to figure out how to modify the code below to search for stored procedure names. Can anyone help me out?
SELECT TABLE_SCHEMA + '.' + TABLE_NAME
FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_TYPE = 'BASE TABLE'
View 1 Replies
View Related
May 2, 2000
How do I find out if a temporary table named '##test' exists? I have a stored
procedure that creates this table and if it exists another stored procedure
should do one thing, if it does not exist I want the SP to do something else.
Any help as to how I can determine if this table exists at the current time
would be greatly appreciated.
Thanks in advance for you help,
Jon
View 6 Replies
View Related
Nov 17, 2006
Not sure if this is the right place to post this but hopefully someone can help me. I would like to determine what the last automatically incremented ID is in a table I need to return it as a variable to a VB.NET program but I'm not sure what the SELECT statement would look like for this. Any help would be greatly appreciated.
View 4 Replies
View Related
May 28, 2002
I am trying to find a global way of when the last time a row in one of my tables was updated or data inserted. I say global because I don't want to drill down through each table looking for modified rows.
I am a DBA of several hundred databases and want to retire those no longer being used.
Is there a column of a system table that has this info.
View 1 Replies
View Related
Jan 12, 2008
Everyone,
I've been fighting a problem all day now. I have given in. I need help.
Here's the problem. I have a SSIS Custom Data Flow Source, for retrieving data from a proprietary data format. The component works great. I can use the Advanced Editor to select the connection to use (also a Custom Connection Manager) and a custom property. The custom property that is the name of a table to select data from.
I am in the process to building a simple UI that has a ComboBox of Connections (by name) and a ListBox of table names available in that connection.
I want to be able to pre-select the connection in the ComboBox if one is already populated. The problem is, I can't figure out how to get access to the connection name of the currently selected connection. When I look at the RuntimeConnectionsCollection[0], that connection is not acquired. I can't get access to the name, or any of its custom properties (see above that connection is Custom also).
Assume I use the Advanced Editor to select a connection to use, then open the custom UI.
How do I figure out what the name of the connection selected is? I know it is possible. The OLE DB Source does it.
Thanks,
Frank
View 4 Replies
View Related
Jun 22, 2006
I am currently writing a custom source adapter that extracts data from a JD Edwards OneWorld system. In the custom user interface of the source component I need to allow the user to set a query (a custom property), and then refresh a list of output columns that will be extracted based upon that query (similar to the list shown in the advanced editor).
My question is, can I apply the custom property change to the component and build my output column list without closing and restarting my custom UI form? I understand that the IDTSComponentUI interface being implemented allows for transactional editing of the component, in that the changes to the component are not applied until I have returned a result in the implemented Edit() method. However is there a way to apply changes without returning this result (and closing my UI)?
Essentially I am looking to have similar behaviour to that of the 'Refresh' button in the advanced component editor form.
Thanks
View 3 Replies
View Related
Feb 5, 2005
almost choked when i read the following recent post on The Daily WTF (http://thedailywtf.com/) the other day --
Logical Tiers? That Makes No Sense! (http://thedailywtf.com/ShowPost.aspx?PostID=28959)
i don't think i can do justice to how utterly stupid that stored procedure is
read the comments and have a laugh
one of the points made was that stored procedures are bad
this twigged something in my memory, so i dug around in my bookmarks, and sure enough, here's another decent discussion about stored procs --
Stored procedures are bad, m'kay? (http://weblogs.asp.net/fbouma/archive/2003/11/18/38178.aspx)
enjoy!
View 6 Replies
View Related
Jun 28, 2007
Hey guys.
I am wondering if it is possible to execute an .exe from a stored proc. I have an application that calls a stored proc and I am wanting for that stored proc to call up an app to show certain results. I have no way of doing this on the application itself as I dont have the source code. So, since I do have access to the SQL I am wondering if it could be done there.
Thanks
tibor
View 14 Replies
View Related
Apr 8, 2004
First off, this is a cross post which is also located here:
http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=34073
Now, with the following stored procs and UDF, the Result is NULL and I cannot figure out why.
What I am doing is calling a stored procedure pass in an OUTPUT variable of type float. This stored proceudre then calls a different stored procedure passing the same OUTPUT variable of type float. The second stored procedure then calls a UDF passing in two variables to be multiplied ans this should set the OUTPUT variable to the result.
The UDF does return the correct result to the interior stored procedure, but the interior stored procedure does not pass the value back to the original stored procudure resultint in a Result value = NULL.
The code is below, just copy / past, execute and you will see exactly what I mean.
Any thoughts?
USE NORTHWIND
GO
CREATE FUNCTION RECTANGULAR_XSECTION
(@fWidth float, @fHeight float)
RETURNS float
AS
BEGIN
RETURN (@fWidth * @fHeight)
END
GO
CREATE PROCEDURE usp_shapes_GetRectangularXSection
@fResult float OUTPUT
AS
declare @fWidth float, @fHeight float
SELECT @fWidth = 108, @fHeight = 10
SELECT @fResult = [dbo].[RECTANGULAR_XSECTION](@fWidth, @fHeight)
SELECT @fResult AS CalledProcedureOkHere
GO
CREATE PROCEDURE usp_shapes_GetXSection
@fResult float OUTPUT
AS
EXECUTE usp_shapes_GetRectangularXSection @fResult
SELECT @fResult AS CallingProcedure_NULL?
GO
declare @fResult float
EXECUTE usp_shapes_GetXSection @fResult
SELECT @fResult as OutsideCallingProcedure_NULL?
GO
DROP FUNCTION RECTANGULAR_XSECTION
GO
DROP PROCEDURE usp_shapes_GetRectangularXSection
GO
DROP PROCEDURE usp_shapes_GetXSection
GO
Mike B
View 3 Replies
View Related
Nov 13, 2007
I am trying to improve my SQL and reduce the number of connections my website is making to the server.
Currently I have a stored procedure that gets all the games (and their details) for a single user which works fine which uses a WHERE userid = @userid which is an Int value.
I now need to create a new procedure which brings back the to all their "friends" (again by their userid). How is it best to do this? I originally tried to do a WHERE userID IN (@userid) but was unable to work out what variable type to use for @userid.
Is it best to do a single query in this way or is there a way to use the existing SP, loop through the collection of userids and join the result together into a single set to return? If an IN is the best route, what is the correct datatype for the variable?
View 5 Replies
View Related
Aug 8, 2006
can anyone help me out.... i need to compare a date that was retrieved from the database and the system date then it must be coded in the stored procs of the database.. help!!!!
View 10 Replies
View Related
May 10, 2006
Hi
in the acquireconnection method Using the below statment I can get a connection Object
oledbConnection = cmado.AcquireConnection(transaction) as OleDbConnection;
from the connection object I can get the connectionstring from the object by calling
oledbConnection.connectionstring() property which will have all the details like DataBase, UserName & other Inofrmation but there is no password Info.
How to get the password Information, I need that information since I will use that info to make OCI calls to fetch the data from the Oracle database in m,y custome source component.
any help is much appriciated
thanks in advance.
View 10 Replies
View Related
Mar 23, 2006
Hi,I have developed a custom source component to get data from a generic odbc connection with some special caracteristics.
The component works fine by getting and mapping the output fields etc...
The only two problems existing are that when i run the task it says that the data flow has no components inside... how is this possible since i have my source mapped to a flat file inside that data flow?
This is the error:
SSIS package "BVEIT000D.dtsx" starting.
Warning: 0x80047034 at BVEIT000D_<EMPRESA> TXT, DTS.Pipeline: The DataFlow task has no components. Add components or remove the task.
Information: 0x4004300C at BVEIT000D_<EMPRESA> TXT, DTS.Pipeline: Execute phase is beginning.
SSIS package "BVEIT000D.dtsx" finished: Success.
The other problem is that if i want to <ignore> a certain source column the component already shows me an error saying that the no column with ID 0 was found...
Any one with experience in creating custom components?
Regards,
View 6 Replies
View Related
Apr 3, 2006
I'm having alot of trouble figuring out the proper way to log from inside my custom source adapter.
I couldn't find my useful information in MSDN, it mostly applies to logging from inside a script task.
I'd like to log my messages along with all the other SSIS package log entries, which I have going to the dts log table.
I'm assuming I should be using some functionality from Microsoft.SqlServer.Dts.RunTime, probably the LogProvider.
Can anyone advise?
View 3 Replies
View Related
May 21, 2006
I need VB.NET source code showing how to create a Custom Component. in SSIS (All the ones I've seen are written in C#.)
TIA,
barkingdog
View 1 Replies
View Related
Mar 8, 2004
All,
I'm relatively new to stored procs (not to SQL or SQL Server) and I am trying to get transactions to work within a stored proc. Here is the code:
(
--define the parameters that are needed
@userID char(32),
@userName varchar(50),
@status char(10),
@type char(10),
@password varchar(50),
@firstName varchar(100),
@lastName varchar(100),
@email varchar(200),
@domain varchar(50),
@pwdExpiry int,
@badLogin int,
@lastLogin datetime,
@full varchar(8000),
@read varchar(8000),
@noaccess varchar(8000)
)
AS
BEGIN TRAN tmp1
--First, insert the user into the system
INSERT INTO ptsUsers(UserID, UserName, Status, Type, Password, FirstName, LastName, Email, DomainName, PasswordExpiry, BadLoginAttempts, LastLoginDate)
values(@userID, @userName, @status, @type, @password, @firstName, @lastName, @email, @domain, @pwdExpiry, @badLogin, @lastLogin);
--Now, we need to add the function access edges for the user
declare @arrayValue char(32)
declare @rightID char(32)
declare @sepPos int
while patindex('%,%',@full)<>0
BEGIN
select @sepPos = patindex('%,%' , @full)
select @arrayValue = left(@full, @sepPos - 1)
-- replace the value with an empty string
select @full = stuff(@full, 1, @sepPos, '')
--create and parse the new id
declare @strID char(32),@tmpStr varchar(40)
set @tmpStr = newid();
set @strID = REPLACE(@tmpStr,'-','')
--get the access right id for full control
select @rightID = (Select AccessRightID from ptsAccessRights where Name = 'Write')
if(@rightID IS NOT NULL)
--insert the records that are full access
INSERT INTO ptsFunctionAccessEdges(FunctionAccessEdgeID, FunctionID, AccessRightID, UserID)
VALUES(@strID, @arrayValue, @rightID, @userID)
else
RAISERROR(50100,15,1)
END
COMMIT TRAN tmp1
IF @@TRANCOUNT > 0
RAISERROR(50101,15,1)
ROLLBACK TRAN tmp1
The transaction does not rollback when any errors occur at all. Any advice/help?
View 3 Replies
View Related
Apr 12, 2004
Hi all!
I am not an expert in Stored Procs. I would like to build one for a product list that would return a default value without using output parameters, if possible. Ultimately, I wouldn't be opposed to it.
It currently looks like this:
CREATE PROCEDURE ProductsByVendorNo
(
@VendorNum nvarchar(24)
)
AS
SELECT
P.ProductID AS ProductID,
P.ProductShortName AS ProductName,
P.ProductDesc AS ProductDesc,
U.UnitDesc AS Unit,
P.VendorProductNumber AS VendorNumber,
V.VendorName AS VendorName,
P.Price AS Price,
P.ImageThumb AS ImageThumb
FROM
tblProducts AS P
INNER JOIN tblUnitCodes AS U ON P.UnitCode=U.UnitCode
INNER JOIN tblVendors AS V ON P.VendorID=V.VendorID
WHERE
V.VendorsVendorNo = @VendorNum
AND P.Inactive = 0
ORDER BY
ProductName,
VendorNumber
I would like for it to return a default, constant value for the URL in the ImageThumb field, if this one is empty. I could not find good documentation of how to use IF statements for this case, i.e. to alter the return of just one field.
Suggestions?
Any input is highly appreciated.
Thanks in advance,
Mili Skikic
View 8 Replies
View Related
Mar 25, 2002
I want to "deny" create, update,and delete access on the dbo stored procs that are in the database, but do not want take away dbo owner access. is this possible?
can i create a role and deny access on a particular table in msdb? or a system table in the user table. Thus preventing the developers on the box access to update any of the dbo owned sp's and have them create their own user-owned stored procs?
this is sql7, sp3, development box.
thanks,
View 1 Replies
View Related
Apr 27, 2001
I am trying to set up a DTS package that selects data from one table on server A into another table on server B. I want to do a select statement that will do the following:
select store_name
from store (server A)
where date_created >= (select max(date_created) from store (server B)
I use EM 7.0 to manage all of my extracts, however, the data is moving from a Syabase (adaptive Server)onto another Syabase(adaptive server) machine.
Unfortunately, there is no functionality for a linked server connection.
I tried the following, (which doesn't error out), but is not displaying the source columns in the destination tab of the DTS package when setting up the transformations.
declare @maxdate datetime
exec serverB.dbo.sp_max_date_from_store @maxdate
select store_name
from store --(server A)
where date_created >= @store
Any help or suggestions would be greatly appreciated!
trevorb
View 1 Replies
View Related
Jun 19, 2000
I will be taking over a database that has almost no pk's or relations(this is not my choice, but a vendors)
Management is looking at stored procs to improve performance, but I am wondering
if the db is in this state will there really be a gain. I am pushing for normalization
first, but if anybody has any ideas or opinions I would appreciate
View 2 Replies
View Related
Sep 10, 2001
I have a stored proc that is run periodically which I execute with a DTS package. The problem is that I have to update a field for each record selected by this stored proc with a specific date. I need to prompt the operator for this date so I can use this value.
View 6 Replies
View Related
