I have a database which has log file size 300 GB. As the drive is filling up i need to clear the space on the drive, for that i have to shrink the log file.Â
Unfortunately i dont have option to take backup of the database.And i am not able to shrink the file now. Is there any way to shrink the log file with out taking backup of it ?
When I backup a my transaction log and then run DBCC SQLPERF(logspace) the log shows 12% space used. The backup was run at night long after any transactions had been executed so there should be no active transactions. In SQL 6.5 you could run DBCC CHECKTABLE(syslogs) to clear up the usage inaccuracy is there a similar command in 7.0 to fix the space usage inaccuracy?
--Buddy
My disk drive was full. So I deleted some records. Then I tried to shrink and it indicated available free space of around 5GB as indicated in the below image.
Once I ran the shrink for data file, though it completed successfully I didn't get the 5GB space as indicated. For log file shrink it shows available space of 200MB and when I run a log file shrink it does free up 200MB as indicated. So why is it not working with data file shrink? What am I doing wrong?
I have a SQL Server 2012 DB in Full recovery mode that has never had a TLOG backup. the log is huge 200+GB.
I tried doing a transaction log backup but there is not enough space on the Disk.
How can I reclaim this log space in SQL Server 2012?
Am using Windows Server 2008R2,In this Server C:/ drive space is getting increase day by day as per my knowledge i have to format that system.If is there any other chances to get space and remove unwanted things from my Server.
View 7 Replies View RelatedI got a space issue on F drive
Total drive capacity 581 GB
Now free space is 4.4 GB ONLY
F:MSSQLDATA..NDF---163072128(163 GB)
F:MSSQLDATA...MDF--441785344(441 GB)
I am trying to shrink the database to get some free space on F: drive but "USSVC_LADadmin" is executing delete statement on this database. so I could not perform any activity at this time
Please suggest how to proceed further?
Hi again
Damn, people, how to shrink log file. I've tried several times with
DBCC SHRINKDATABASE ( database_name , TRUNCATEONLY)
and
DBCC SHRINKFILE (log_name, final_MB, TRUNCATEONLY)
and the log still is _untouched_
I have got big table, about 190 mln records (15 GB) and after simple update the log is very big but unnessesery.
Michal Pajkowski
What is the best way to Shrink a Data file and Log Files.
View 1 Replies View RelatedHello,
we are running on sql server 2005 and in some of our production databases the log files are twice as bigger than the data files. we are planning to reduce the log file size. I saw the option on the management studio to shrink the log file. I just have some questions on this.
as long as we are doing on the production server can we do that while the database is online or do we need to take the database offline? any help would be appreciated. Thank you!
.
Hey - I know that I can find space information about SQL Server. Allocated space, free space, used space, data space, etc... BUT is there a way that I can query how much total/available space is on the actual drive? For example, let's say that I have SQL installed on the D drive of a Server; i also have another application on that drive. I know that I can query how much room SQL Server is using, but can i query how much total/available space is on the drive? Any help appreciated.
View 1 Replies View RelatedI'm running a security application that generates a lot of events. I have gone in over the past couple days and deleted large numbers of old events in an effort to reclaim space on the D: drive where the SQL DB for this app resides. I did this throught the app itself... through its GUI front end.
I'm not having any impact. There is not a file on the same drive where the deleted events are being directed to. If all these events are going away, why does my used space on the drive not shrink? I came at it from another tack, creating sql queries to delete old events from the same app. I did this through queries in the SQL mgmt studio. The tasks (multiple) completed successfully, and the report on the # of rows 'affected' showed that it was a substantial number. No decrease in the windows drive space being used. Any tips?
I have a SQL 2005 server I am working on for a client and the issue is this. The original install was put on the servers c: partition. When they ran out of space they moved all of the databases to a different drive. They still run into problems when they run maintenance plans. Half of them fail as drive c: runs out of space.
Is there a temp directory or file that needs to be moved and if so how do I do this? Do SQL system databases grow when a maintenance plan is run? Do the system databases need to be moved as well? I assume that these changes will require down time but I would like to avoid that if possible.
I am new to SQL and I have looked everywhere but have found no solutions. I would think there must be a temp directory where data is stored during the job.
Any help would be appreciated. Thanks.
Steve
Hello Everyone,
I wasn't able to find the answer to my question by searching the forum. I would very much appreciate if anyone would help me.
I need to install the SQL Server Workgroup trial. I wasn't able to find the workgroup trial so I was trying to install the enterprise instead. (If anyone knows how to get ahold of the workgroup trial that would be a help too)
I keep getting the following error when running the SQLEval.exe:
There is not enough space on drive C: to extract this package
I did an internet search on this error and it seems there is a bug that requires the amount of free space not be a multiple of 4. I currently have 13.2 GB free space and I have tried adding and removing files, to no avail. I have tried downloading the file in a few different versions in case the file was corrupted, and rebooting etc, but still I keep getting the same message. I only have one drive!!!
Can anyone help me with this?
Hello all
as indicated by my stupid question, I am very new to sql. our vrsion is 2000 and I'm talking about in enterprise manager, the database that was created is not showing up in the list of db. Although I can see the file in explorer.
The problem I€™m having is when I try to attach the database €œmailarchive3Q2007_data.mdf€? it is also looking for the log file €œmailarchive3Q2007_log.ldf€? . The log file was removed by someone else off our system. I have a backup of the file but it is too large to restore now (160 gig) when the system was first set up the recovery model was not set to simple so the log just grew till it filled up our drive. I no longer have the drive space necessary to restore the log file and shrink it. So what do I do now? I need some kind of €œmailarchive3Q2007_log.ldf€? file to attach the database in enterprise manager.
Hope sombody can help.
thanks
Mike
Hello everybody.
I have SQL2000 sp3 standard
with 50 db's
All db set for full recovery
and autoshrink
Backup done with Tivoli
full backup once a week
log backup done every 12 hrs
Problem .. shrinking logs
every 20 min I run job
DBCC SHRINKFILE (My_db_logFile) for every db
70% of the time I am getting
message similar to
-------------
Cannot shrink log file 2 (Wholesale_Log) because all logical log files are in use.
--------------
1. I checked with sp_who2
The is no activity on db 'Wholesale_Log' or any other db returning "Cannot shrink..."
Why i getting "Cannot shrink ..." ?
even if job runs right after backup of the log files ,I still have messages.
Thank you
Alex
I have a database file LEAR_Index(yes, it hold index data) from a havehave recently removed a bunch of data.It is about 120 Gb, 100Gb of which is not used. I wan´t to shrink thefile to lean 30-40Gb.I´ve been trying this:dbcc shrinkfile('LEAR_Index',40000)But to no apparent avail; the file did not shrink.I´ve tried using enterprise manager for this but it consistenlycrashes when performing this operation.#Any thoughs, idear as to what i might be doing wrong?
View 6 Replies View RelatedHi,
I have some doubts about Shrinking databases or files.
while shrinking a file, I learned that we are alllowed to shrink more than the minimum size of the file, does not it bring damage to the data in that file ??
In our SQL Server database we will have a table that will be populated with about 2000 recordsper day. That is 2000 records per day for 5 days per week. Currently the computer we are using has about 50 gigabytesof available hard drive space on it. We are concerned that maybe we will need a bigger hard drive,based solely on the number of records entered into this table per day. The problem is I don'tknow how to calculate how much hard drive space we need. I think I read that using varchar,sql server 2005 really optimizes a database. Here is a typical example of data in ourdatabase. I put dots on three lines between the first and last sample record to justillustrate that there are many records in between.
Basically we only need 8 months of data at a time in the table and then we can purgerecords older than 8 months.Can someone help me approximate how much hard drive space I might need for 8 months of data,given the following sample record in the database?
Sample: -->34.5 4.08 10.6 .0012
Sample Table in my DB just for illustration:
(PPsquare inch) (Diameter) (Weight gm) (coeffOfSatFriction)
34.5 4.08 10.6 .0012...21.7 3.54 6.22 .019
Hi,
We have a database in production which has free space about 200 GB in Data files and Index files, I want to shrink Data files and Index files.If I do incremental shrink in daytime does it hurt the performance of the database or please advise what is the best practice.
thanks
I've been tasked with taking over the support for a client's SQL Serverdatabase. I'm not a DBA by profession, I'm a software developer whouses SQL Server as a database designer.The clients have reported that the server is running out of disk spaceand examination shows that the log files for several of the databasesare at 5Gb or more.After reading around the subject I suggested the following sequence ofoperations:-- Select the name of the database you want to shrinkUSE MyDB-- Dump unwanted transactionsdump tran MyDB with truncate_only-- Get the name of the logfileSELECT * from sysfiles-- Having examined the rows returned by this use the log file....-- Shrink the file to required size (in MB)DBCC SHRINKFILE('MyDB_log', 10)Is this a reasonable approach? Please bear in mind that I'm pretty newto this, and I have many other tasks to do besides manage the server.A previous DBA has set up good maintenance plans etc. so everything isbeing properly backed up (well, I think it is)If this IS a good approach, would it be reasonable to do this on, say,a monthly basis as a scheduled job? Obviously the stepSELECT * from sysfileswhich gives us the physical name of the log file would be removed andthe job would operate explicitly on each log file for each database inturn.Many thanks for reading.William Balmer.
View 2 Replies View RelatedI have dataware house database and it's size is 2 TB with simple recovery model.I want to reduce it's size because everyday before loading table gets truncate.Is it best practice to shrink the datafiles?database having 5 data files and one log file.what is the best way to reduce?
View 7 Replies View RelatedI have a no of databases in full recovery model whose files are many times their datafiles. It is because these databases were copied from the development servers and in the development servers they were not taking the transactional log backups although once in the production server it is ensured that a transactional log is taken once in a day atleast. I plan to shrink the logfiles using the dbcc commands. However I am afraid that it may lead to severe defragmentation and performance hits.
We are using Sql Server 2008R2 enterprise edition which is clustered.
In this context my questions are:-
1)What is the best course to do the shrinking of log with out defragmentation?
2)Can I do the shrinking when the database is in use or is online in production?
3)Will the shrinking of the logfile improve the performance in any manner like that of the i/o operations or paging?
4)Can I do the shrinking of the log files alone without the shrinking of the corresponding data files?
On the drive that SQL server is install on which is the C drive the amount of space is 495mb, can the amount of space be a potential problem, I am so used to looking at the drives that contains the data and log files and the backup.
So My question is should I also concern myself with the drive the sql server itself is installed on?
Thanks
Lystra
I am amazed to see this morning that log file consuming whole disk space even though the database is in simple recovery mode.
What could be the reasons to fill in the space even in simple recovery mode??
I am using Sql Server 2012 in always on configuration with multi subnet failover clustering. Size of data file has suddenly increased, i dropped all the unnecessary table from database three days back. day before yesterday i tried shrinking data file using DBCCÂ command but it is taking too much time. is there any other option for deallocating the space.
View 7 Replies View RelatedIs it possible to find out available free space from a mounted / network drive using tsql query? I am using sql server 2008 R2.
View 5 Replies View RelatedI just upgraded SQL6.5 standard(Installed 7.0 and ran Wizard to upgrade dbs) to SQL7.0 by running the exe file.
It turned out that the MSSQL7 folder is follen on Drive C instead of Drive D which is what I wanted. When I was running the upgrade exe file, there was no prompt to ask me the right path.
How could I have the MSSQL7 folder installed on D drive?
Thank you for help
All,
I'm writing to ask if anyone knows whether or not MS SQL server stores in any system tables the association between a database and the drive letter/directory path where its corresponding MDF/LDF files are located.
Thanks,
Isaac
Hi friends, i want to know something abt sql server installation and database properties as under.1) how much disk space reqd by multiuser sqlserver 2000 db to install ?2) is it possible to install sql 2K on Flash Drive ( gen connect at USB) ?3) When v create a database user Enterprise Manager , which files created by database ?4) If i Know datafiles name of a database e.g. pubs , and if v copied on cd and paste on other system which has sql 2K install , does those database works ?5) is it possible to create database on flash drive ? thanx in advance.
View 2 Replies View RelatedHowdy y'all! :)
I have been instructed to move a large database we have on one of our servers off the current drive (local RAID-5 driveset in the server) to a EMC "drive" (logical drive, off-server).
I know one option is to back up the database, delete the database, re-create the db using the new drive for data/log files, then restore the database.
However, I was wondering if it would be better to just detach the DB, move the data/log files, then reattach to them?
Is it half-doz of one, and 6 of the other?
How should I go about this dastardly deed?
Off to poke around in BOL, but thought I would post first in case it's an incredibly easy answer for y'all
Thanks!
We have a cluster with two nodes and two instances of SQL Server 2012 Standard Edition running on them. Volume W: is a Fusion-IO card.
On one of these nodes a lot of database names are showing up in the resource monitor as *.mdf files (W:0MSSQL1…).
How and why SQL Server is using these files? They only show up on one of the nodes having more load.
Volume I: is the volume where the transaction log is written so we can explain these files.
Documentation that supports the placement of Tempdb files on the root of a drive, i.e T: instead of T: empdb. I am positive this is not a best practice, but when challenged could not find any documentation that would support that view.
View 7 Replies View Related