I have to tables like given below Landing table "A" (Data load will happen over here, No primary keys mentioned over here) table "B" .Now I want to move the data from A to B.I have made use of below query insert into B select * from A...Landing table "A" has huge no of records, MS SQL server is taking huge amount of time.any alternative way to make this insertion process faster?
View 6 RepliesWe need to Insert/Update a Fact Table from staging Table. currently we are using a SP which update Fact Table for Each region. this process is schedule, every 5 min job is run and Update fact table.but time of Insert and Update too long from staging to Fact, currently we are using merge statement for Insert and update.in my sp we are looping number how many region we need to update and at a time single Region we are updating using while loop in current SP.
View 7 Replies View RelatedI have a requirement of table partitioning. we have 10 years of data on a table which is 30 billion up rows on 2005 server we are upgrading it to 2014. we have to keep 7 years of data. there is no keys on table or date column. since its a huge amount of data and many users its slow down the process speed. we are thinking to do partition on 7 years for Quarterly based. but as i said there is no date column on table we have to use reference table to get date. is there a way i can do the partitioning with out adding date column on table? also does partition will make query faster?
I have think three ways to do it.
1. leave as it is.
2. 7 years partition on one server
3. 3 years partition on server1 and 4 years partition on server2 (for 4 years is snapshot better?)
I want Compare two Table data and insert changed field to the third table ...
View 9 Replies View RelatedHi all,
I have SQL Server Management Studio Express (SSMS Express) and SQL Server 2005 Express (SS Express) installed in my Windows XP Pro PC that is on Microsoft Windows NT 4 LAN System. My Computer Administrator grants me the Administror Privilege to use my PC. I tried to use SQLQuery.sql (see the code below) to create a table "LabResults" and insert 20 data (values) into the table. I got Error Messages 102 and 156 when I did "Parse" or "Execute". This is my first time to apply the data type 'decimal' and the "VALUES" into the table. I do not know what is wrong with the 'decimal' and how to add the "VALUES": (1) Do I put the precision and scale of the decimal wrong? (2) Do I have to use "GO" after each "VALUES"? Please help and advise.
Thanks in advance,
Scott Chang
///////////--SQLQueryCroomLabData.sql--///////////////////////////
USE MyDatabase
GO
CREATE TABLE dbo.LabResults
(SampleID int PRIMARY KEY NOT NULL,
SampleName varchar(25) NOT NULL,
AnalyteName varchar(25) NOT NULL,
Concentration decimal(6.2) NULL)
GO
--Inserting data into a table
INSERT dbo.LabResults (SampleID, SampleName, AnalyteName, Concentration)
VALUES (1, 'MW2', 'Acetone', 1.00)
VALUES (2, 'MW2', 'Dichloroethene', 1.00)
VALUES (3, 'MW2', 'Trichloroethene', 20.00)
VALUES (4, 'MW2', 'Chloroform', 1.00)
VALUES (5, 'MW2', 'Methylene Chloride', 1.00)
VALUES (6, 'MW6S', 'Acetone', 1.00)
VALUES (7, 'MW6S', 'Dichloroethene', 1.00)
VALUES (8, 'MW6S', 'Trichloroethene', 1.00)
VALUES (9, 'MW6S', 'Chloroform', 1.00)
VALUES (10, 'MW6S', 'Methylene Chloride', 1.00
VALUES (11, 'MW7', 'Acetone', 1.00)
VALUES (12, 'MW7', 'Dichloroethene', 1.00)
VALUES (13, 'MW7', 'Trichloroethene', 1.00)
VALUES (14, 'MW7', 'Chloroform', 1.00)
VALUES (15, 'MW7', 'Methylene Chloride', 1.00
VALUES (16, 'TripBlank', 'Acetone', 1.00)
VALUES (17, 'TripBlank', 'Dichloroethene', 1.00)
VALUES (18, 'TripBlank', 'Trichloroethene', 1.00)
VALUES (19, 'TripBlank', 'Chloroform', 0.76)
VALUES (20, 'TripBlank', 'Methylene Chloride', 0.51)
GO
//////////Parse///////////
Msg 102, Level 15, State 1, Line 5
Incorrect syntax near '6.2'.
Msg 156, Level 15, State 1, Line 4
Incorrect syntax near the keyword 'VALUES'.
////////////////Execute////////////////////
Msg 102, Level 15, State 1, Line 5
Incorrect syntax near '6.2'.
Msg 156, Level 15, State 1, Line 4
Incorrect syntax near the keyword 'VALUES'.
I'm trying to insert data into a table from two tables into a single table along with a hard coded value.
insert into TABLE1
(THING,PERSONORGROUP,ACCESSRIGHTS)
VALUES
((select SYSTEM_ID from TABLE2 where
AUTHOR IN (select SYSTEM_ID from TABLE2 where USER_ID
=('USER1'))),(select SYSTEM_ID from TABLE2 where USER_ID
=('USER2')),255)
I get the following-
Msg 512, Level 16, State 1, Line 1
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
The statement has been terminated.
Do I need to use a cursor?
Hi thereApplication : Access v2K/SQL 2KJest : Using sproc to append records into SQL tableJest sproc :1.Can have more than 1 record - so using ';' to separate each linefrom each other.2.Example of data'HARLEY.I',03004,'A000-AA00',2003-08-29,0,0,7.5,7.5,7.5,7.5,7.0,'Notes','General',1,2,3 ;'HARLEY.I',03004,'A000-AA00',2003-08-29,0,0,7.5,7.5,7.5,7.5,7.0,'Notes','General',1,2,3 ;3.Problem - gets to lineBEGIN TRAN <---------- skipsrestINSERT INTO timesheet.dbo.table14.Checked permissions for table + sproc - okWhat am I doing wrong ?Any comments most helpful......CREATE PROCEDURE [dbo].[procTimesheetInsert_Testing](@TimesheetDetails varchar(5000) = NULL,@RetCode int = NULL OUTPUT,@RetMsg varchar(100) = NULL OUTPUT,@TimesheetID int = NULL OUTPUT)WITH RECOMPILEASSET NOCOUNT ONDECLARE @SQLBase varchar(8000), @SQLBase1 varchar(8000)DECLARE @SQLComplete varchar(8000) ,@SQLComplete1 varchar(8000)DECLARE @TimesheetCount int, @TimesheetCount1 intDECLARE @TS_LastEdit smalldatetimeDECLARE @Last_Editby smalldatetimeDECLARE @User_Confirm bitDECLARE @User_Confirm_Date smalldatetimeDECLARE @DetailCount intDECLARE @Error int/* Validate input parameters. Assume success. */SELECT @RetCode = 1, @RetMsg = ''IF @TimesheetDetails IS NULLSELECT @RetCode = 0,@RetMsg = @RetMsg +'Timesheet line item(s) required.' + CHAR(13) + CHAR(10)/* Create a temp table parse out each Timesheet detail from inputparameter string,count number of detail records and create SQL statement toinsert detail records into the temp table. */CREATE TABLE #tmpTimesheetDetails(RE_Code varchar(50),PR_Code varchar(50),AC_Code varchar(50),WE_Date smalldatetime,SAT REAL DEFAULT 0,SUN REAL DEFAULT 0,MON REAL DEFAULT 0,TUE REAL DEFAULT 0,WED REAL DEFAULT 0,THU REAL DEFAULT 0,FRI REAL DEFAULT 0,Notes varchar(255),General varchar(50),PO_Number REAL,WWL_Number REAL,CN_Number REAL)SELECT @SQLBase ='INSERT INTO#tmpTimesheetDetails(RE_Code,PR_Code,AC_Code,WE_Da te,SAT,SUN,MON,TUE,WED,THU,FRI,Notes,General,PO_Nu mber,WWL_Number,CN_Number)VALUES ( 'SELECT @TimesheetCount=0WHILE LEN( @TimesheetDetails) > 1BEGINSELECT @SQLComplete = @SQLBase + LEFT( @TimesheetDetails,Charindex(';', @TimesheetDetails) -1) + ')'EXEC(@SQLComplete)SELECT @TimesheetCount = @TimesheetCount + 1SELECT @TimesheetDetails = RIGHT( @TimesheetDetails, Len(@TimesheetDetails)-Charindex(';', @TimesheetDetails))ENDIF (SELECT Count(*) FROM #tmpTimesheetDetails) <> @TimesheetCountSELECT @RetCode = 0, @RetMsg = @RetMsg + 'Timesheet Detailscouldn''t be saved.' + CHAR(13) + CHAR(10)-- If validation failed, exit procIF @RetCode = 0RETURN-- If validation ok, continueSELECT @RetMsg = @RetMsg + 'Timesheet Details ok.' + CHAR(13) +CHAR(10)/* RETURN*/-- Start transaction by inserting into Timesheet tableBEGIN TRANINSERT INTO timesheet.dbo.table1select RE_Code,PR_Code,AC_Code,WE_Date,SAT,SUN,MON,TUE,WE D,THU,FRI,Notes,General,PO_Number,WWL_Number,CN_Nu mberFROM #tmpTimesheetDetails-- Check if insert succeeded. If so, get ID.IF @@ROWCOUNT = 1SELECT @TimesheetID = @@IDENTITYELSESELECT @TimesheetID = 0,@RetCode = 0,@RetMsg = 'Insertion of new Timesheet failed.'-- If order is not inserted, rollback and exitIF @RetCode = 0BEGINROLLBACK TRAN-- RETURNEND--RETURNSELECT @Error =@@errorprint ''print "The value of @error is " + convert (varchar, @error)returnGO
View 2 Replies View RelatedIs it possible to insert data into a table from a temporary table that is inner join?
Can anyone share an example of a stored procedure that can do this?
Thanks,
xyz789
Hi,
I am having 2 tables. One is main table and another is history table. Whenever I update the main table, I need to insert the all the main table data to History table, before updating the main table.
Overall it is like storing the history of the table updation.
How do i write a stored procedure for this?
Anybody has done this before?
Pls help me.
I want to insert the data from temp table to other table. Only condition is, it needs to sorted based on tool number and tool date. For example if we have ten records for tool number 1000, it should be order by tool number and then based on tool_dt. Both tables doesn't have any primary keys. Please find below my code. I removed all the unnecessary columns for simple understanding. INSERT INTO tool_summary (tool_nbr, tool_dt) select tool_nbr, tool_dt from #tool order by tool_nbr, tool_dt...But this query is not working as expected. Data is getting shuffled.
Actual Data
Expected Result
1000
1-Aug
1000
1-Feb
1000
1-Jul
1000
[code]....
Hello,
I have a table called #table1 which is populated as in the example below.
I would like to write a selectinsert statement based on #table1 that populates #table2 like in the #table2 example.
Note #table2 is a fixed table that follows the structure below.
Can any of you T-SQL gurus help me with my problem?
Any help will be most appreciated.
Thanks
---------------------------------------------
/*
Please paste T-SQL into query window
*/
---------------------------------------------
CREATE TABLE #table1
--max of 5 orders
(
custID nvarchar(6),
dateorder [datetime] NULL,
order1 nvarchar(2),
order2 nvarchar(2),
order3 nvarchar(2),
order4 nvarchar(2),
order5 nvarchar(2)
)
GO
SET ANSI_PADDING OFF
Insert into #table1
select '012345','2008-04-19 00:00:00.000' , '01', '06', '05', null, null UNION all
select '012345','2008-04-20 00:00:00.000' , '01', '07', '05', '07', '03' UNION all
select '012345','2008-04-21 00:00:00.000' , '01', '06', null, null, null UNION all
select '012345','2008-04-22 00:00:00.000' , '01', '02', '05', '07', null UNION all
select '012345','2008-04-23 00:00:00.000' , '03', '06', null, null, null UNION all
select '987654','2008-04-21 00:00:00.000' , '19', '21', null, null, null UNION all
select '987654','2008-04-22 00:00:00.000' , '01', '02', '05', '16', null UNION all
select '987654','2008-04-23 00:00:00.000' , '03', '06', null, null, null
select * from #table1
--This is the table i would like to insert my data into
CREATE TABLE #table2
--max of 5 orders in 1 day
--it does not matter what date the date order was made the 1st date would appear in dateorder1 and so on...
(
custID nvarchar(6),
dateorder1 [datetime] NULL,
order1_1 nvarchar(2),
order1_2 nvarchar(2),
order1_3 nvarchar(2),
order1_4 nvarchar(2),
order1_5 nvarchar(2),
dateorder2 [datetime] NULL,
order2_1 nvarchar(2),
order2_2 nvarchar(2),
order2_3 nvarchar(2),
order2_4 nvarchar(2),
order2_5 nvarchar(2),
dateorder3 [datetime] NULL,
order3_1 nvarchar(2),
order3_2 nvarchar(2),
order3_3 nvarchar(2),
order3_4 nvarchar(2),
order3_5 nvarchar(2),
dateorder4 [datetime] NULL,
order4_1 nvarchar(2),
order4_2 nvarchar(2),
order4_3 nvarchar(2),
order4_4 nvarchar(2),
order4_5 nvarchar(2),
dateorder5 [datetime] NULL,
order5_1 nvarchar(2),
order5_2 nvarchar(2),
order5_3 nvarchar(2),
order5_4 nvarchar(2),
order5_5 nvarchar(2)
)
Insert into #table2
select '012345','2008-04-19 00:00:00.000' , '01', '06', '05', null, null, '2008-04-20 00:00:00.000' , '01', '07', '05', '07', '03','2008-04-21 00:00:00.000' , '01', '06', null, null, null,'2008-04-22 00:00:00.000' , '01', '02', '05', '07', null,'2008-04-23 00:00:00.000' , '03', '06', null, null, null UNION all
select '987654','2008-04-21 00:00:00.000' , '19', '21', null, null, null ,'2008-04-22 00:00:00.000' , '01', '02', '05', '16', null,'2008-04-23 00:00:00.000' , '03', '06', null, null, null , null, null, null, null, null, null, null, null, null, null, null, null
select * from #table2
drop table #table1
drop table #table2
----------------------------------------
we have a table below
TABLE1
ID Roll Name Amount . . . . . . so on
---------------------------------------
1 2 Alex 500
2 5 Jones 600
3 2 Ales 400
and we have TABLE 2
ID Roll Name Amount . . . . . . . so on
In both the Tables ID Field is Identity Field and rest all the columns are identical in both the tables.I want to perform a query in such a way that SQL Should,
1) Remove all data from TABLE2 First
2) Select those records from TABLE1 where Roll = 2
3) Then, Insert the results to TABLE 2
So we should get the result similar to below:
ID Roll Name Amount . . . . . . . so on
---------------------------------------
1 2 Alex 500
3 2 Ales 400
how can I do this in a same sql statement.
I have two databases in SQL Server and they both have almost the same tables. I want to insert the data of a table from the first database into a table with the same name, but from the second database. How can i do this?
I am writing a query to return some production data. Basically i need to insert either 1 or 2 rows into a Table variable based on a decision as to does the production part make 1 or 2 items ( The Raw data does not allow for this it comes from a look up in my database)
I can retrieve all the source data i need easily but when i come to insert it into the table variable i need to insert 1 record if its a single part or 2 records if its a twin part. I know could use a cursor but im sure there has to be an easier way !
Below is the code i have at the moment
declare @startdate as datetime
declare @enddate as datetime
declare @Line as Integer
DECLARE @count INT
set @startdate = '2015-01-01'
set @enddate = '2015-01-31'
[Code] .....
Hi,
I am new to SQL 2005. I have to design schema for scientific data warehouse. Data is available in 2 or more flat data files recorded at 1 sec interval. At Least 2 of the data files have 100+ columns. I am inclined to create a table per data file type. I want to know If this is correct/optimal for me to do?
I don't think I can create normalize tables based on the headers in these Data files.
Primary Objective of this data warehouse is make it available for reporting services and Analysis Services.
Any suggestions or tutorials for me?
Thanks,
Vinod Kushwaha
Hi,
I am new to SQL 2005. I have to design schema for scientific data warehouse. Data is available in 2 or more flat data files recorded at 1 sec interval. At Least 2 of the data files have 100+ columns. I am inclined to create a table per data file type. I want to know If this is correct/optimal for me to do?
I don't think I can create normalize tables based on the headers in these Data files.
Primary Objective of this data warehouse is make it available for reporting services and Analysis Services.
Any suggestions or tutorials for me?
Thanks,
Vinod Kushwaha
I have data that is similar in nature to stock market data. There are about 100 entries per day. I would like to setup a second table to supply chart information. (assuming 1000 pixels per chart max)
What is the best way to condense the information in this table so that if I query for a chart, the table returns about 1000 points? I could have several tables setup, one for short term, and one or two for longer term. But I still don't know how to condense them.
I have a very large table that I am trying to partition and use to reduce maintenance overhead as well as improve performance. The table contains about 12 years worth of data but only the most recent years is inserted/updated/deleted from thru the app. I created partitions on a computed(persisted) column which holds the "year" value derived from a date column. I have created the partitions with all the default set options, and the stored procedure which performs the delete against this table also was created with no special set options(basically database/session default). Yet, every time I try to run the proc to delete data thru the app, I get this error:
Msg 1934, Level 16, State 1, Procedure xxxx, Line 118
DELETE failed because the following SET options have incorrect settings: 'ANSI_WARNINGS'. Verify that SET options are correct for use with indexed views and/or indexes on computed columns and/or filtered indexes and/or query notifications and/or XML data type methods and/or spatial index operations.
I've tried setting ANSI_WARNINGS on and off when creating the proc, inside the proc etc.., its always the same error whatever I set the option to.
I have 3 tables (accnt, jobcost, and servic15). all with the same fields (code, jno, ven, date). I need to insert the data from these tables into another table called dummy with the same fields, in one statement or query.
View 3 Replies View RelatedI never created table on the basis of Data model diagram . I have to create the 3 table on the basis of given Data model diagram. There are 3 tables
1.md_geographyleveltype
2.md_geographylevel
3.md_geographylevelxref
I have tried to create 2 table but unable to create 3rd table.
CREATE TABLE [dbo].[md_geographylevel](
[type_key] [int] NOT NULL,
[geog_key] [int] NOT NULL,
[Type_description] [nvarchar](50) NULL,
[Store_flag] [nvarchar](10) NULL,
[Type_short_desciption] [nvarchar](50) NULL,
[Code] ....
I am getting difficulties to create table script for table
md_geographylevelxref
How to create the table create script for
md_geographylevelxref
I have created a table Table with name as Varchar and id as int. Now i have started inserting the rows like, insert into Table values ('arun',20).Yes i have inserted a row in the table. Now i have got the values " arun's ", 50. insert into Table values('arun's',20) My sqlserver is giving me an error instead of inserting the row. How will you solve this problem?
Table 1:
cityId ,cityname,state
and
Table 2:
Id,cityname,State,...
There are a large amount of data (Cityname and State)in table 2 is valueable,I want insert them into table1.
But I don't know how,anybody can help?what I should do and what I should notice?
Thank you!
I need to include data from one table to another. What I need is to take the info from a field in Table A and insert that into a field in Table B based on matching info in another field.
Basicly I ahve the following scenario.
Table ProductVariant with fields ProductID and DisplayOrder and Table ProductCategory with fields ProductID and DisplayOrder
I need to include the DisplayOrder info from Table ProductVariant into field DisplayOrder in Table ProductCategory based on a match in field ProductID
so If ProductVariant has the following records
ProductID DisplayOrder
1000 12
1001 25
1002 42
And ProductCategory has
ProductID DisplayOrder
1000 1
1001 1
1002 1
The DisplayOrder field in ProductCategory should be updated to look like
ProductID DisplayOrder
1000 12
1001 25
1002 42
I have used SET to change values in field such as changing prices by using
UPDATE ProductVariant
SET Price = Price*1.05
to increase prices by 5% but cannot figure and have also used it to include text from one field to another within the same table but I cannot figure out how to do it when data needs to come from a different table and needs to be qualified based on yet another field
Any suggestions or directions to info that will help me. Everything I have come across so far is for more complex needs and doesn't suit my level of experience with SQL. I am using SQL 2005 Enterprise Edition
I normalized the below tables but I am finding it difficult to copy data to the new tables. How do I copy data from existing table to the normalized tables? see the table structure below and other supporting information:
SKU_DATA(SKU,SKU_Description,Department,Buyer) Note: this table already has data in it.
CREATE TABLE SKU_DATA (
SKU
Integer NOT
NULL,
[code].....
The table structure above have two three determinants( SKU,SKU_Description and Buyer). SKU and SKU_Description are candidate keys. Primary key is SKU.
Normalization : SKU_DATA(SKU,SKU_Description, Buyer)
BUYER(Buyer,Department)
I'm inserting from TempAccrual to VacationAccrual . It works nicely, however if I run this script again it will insert the same values again in VacationAccrual. How do I block that? IF there is a small change in one of the column in TempAccrual then allow insert. Here is my query
INSERT INTO vacationaccrual
(empno,
accrued_vacation,
accrued_sick_effective_date,
accrued_sick,
import_date)
[Code] ....
For reasons that are not relevant (though I explain them below *), Iwant, for all my users whatever privelige level, an SP which createsand inserts into a temporary table and then another SP which reads anddrops the same temporary table.My users are not able to create dbo tables (eg dbo.tblTest), but arepermitted to create tables under their own user (eg MyUser.tblTest). Ihave found that I can achieve my aim by using code like this . . .SET @SQL = 'CREATE TABLE ' + @MyUserName + '.' + 'tblTest(tstIDDATETIME)'EXEC (@SQL)SET @SQL = 'INSERT INTO ' + @MyUserName + '.' + 'tblTest(tstID) VALUES(GETDATE())'EXEC (@SQL)This becomes exceptionally cumbersome for the complex INSERT & SELECTcode. I'm looking for a simpler way.Simplified down, I am looking for something like this . . .CREATE PROCEDURE dbo.TestInsert ASCREATE TABLE tblTest(tstID DATETIME)INSERT INTO tblTest(tstID) VALUES(GETDATE())GOCREATE PROCEDURE dbo.TestSelect ASSELECT * FROM tblTestDROP TABLE tblTestIn the above example, if the SPs are owned by dbo (as above), CREATETABLE & DROP TABLE use MyUser.tblTest while INSERT & SELECT usedbo.tblTest.If the SPs are owned by the user (eg MyUser.TestInsert), it workscorrectly (MyUser.tblTest is used throughout) but I would have to havea pair of SPs for each user.* I have MS Access ADP front end linked to a SQL Server database. Forreports with complex datasets, it times out. Therefore it suit mypurposes to create a temporary table first and then to open the reportbased on that temporary table.
View 6 Replies View RelatedOn my site users can register using ASP Membership Create user Wizard control.
I am also using the wizard control to design a simple question and answer form that logged in users have access to.
it has 2 questions including a text box for Q1 and dropdown list for Q2.
I have a table in my database called "Players" which has 3 Columns
UserId Primary Key of type Unique Identifyer
PlayerName Type String
PlayerGenre Type Sting
On completing the wizard and clicking the finish button, I want the data to be inserted into the SQl express Players table.
I am having problems getting this to work and keep getting exceptions.
Be very helpful if somebody could check the code and advise where the problem is??
<asp:Wizard ID="Wizard1" runat="server" BackColor="#F7F6F3"
BorderColor="#CCCCCC" BorderStyle="Solid" BorderWidth="1px"
DisplaySideBar="False" Font-Names="Verdana" Font-Size="0.8em" Height="354px"
onfinishbuttonclick="Wizard1_FinishButtonClick" Width="631px">
<SideBarTemplate>
<asp:DataList ID="SideBarList" runat="server">
<ItemTemplate>
<asp:LinkButton ID="SideBarButton" runat="server" BorderWidth="0px"
Font-Names="Verdana" ForeColor="White"></asp:LinkButton>
</ItemTemplate>
<SelectedItemStyle Font-Bold="True" />
</asp:DataList>
</SideBarTemplate>
<StepStyle BackColor="#669999" BorderWidth="0px" ForeColor="#5D7B9D" />
<NavigationStyle VerticalAlign="Top" />
<WizardSteps>
<asp:WizardStep runat="server">
<table class="style1">
<tr>
<td class="style4">
A<span class="style6">Player Name</span></td>
<td class="style3">
<asp:TextBox ID="PlayerName" runat="server"></asp:TextBox>
</td>
<td>
<asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server"
ControlToValidate="PlayerName" ErrorMessage="RequiredFieldValidator"></asp:RequiredFieldValidator>
</td>
</tr>
<tr>
<td class="style5">
<td class="style3">
<asp:DropDownList ID="PlayerGenre" runat="server" Width="128px">
<asp:ListItem Value="-1">Select Genre</asp:ListItem>
<asp:ListItem>Male</asp:ListItem>
<asp:ListItem>Female</asp:ListItem>
</asp:DropDownList>
</td>
<asp:RequiredFieldValidator ID="RequiredFieldValidator2" runat="server"
ControlToValidate="PlayerGenre" ErrorMessage="RequiredFieldValidator"></asp:RequiredFieldValidator>
</td>
</tr>
</table>
Sql Data Source
<asp:SqlDataSource ID="InsertArtist1" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>" InsertCommand="INSERT INTO [Playerst] ([UserId], [PlayerName], [PlayerGenre]) VALUES (@UserId, @PlayerName, @PlayerGenre)"
ProviderName="<%$ ConnectionStrings:ConnectionString.ProviderName %>">
<InsertParameters>
<asp:Parameter Name="UserId" Type="Object" />
<asp:Parameter Name="PlayerName" Type="String" />
<asp:Parameter Name="PlayerGenre" Type="String" />
</InsertParameters>
</asp:SqlDataSource>
</asp:WizardStep>
Event Handler
To match the answers to the user I get the UserId and insert this into the database to.protected void Wizard1_FinishButtonClick(object sender, WizardNavigationEventArgs e)
{
SqlDataSource DataSource = (SqlDataSource)Wizard1.FindControl("InsertArtist1");
MembershipUser myUser = Membership.GetUser(this.User.Identity.Name);
Guid UserId = (Guid)myUser.ProviderUserKey;String Gender = ((DropDownList)Wizard1.FindControl("PlayerGenre")).SelectedValue;
DataSource.InsertParameters.Add("UserId", UserId.ToString());DataSource.InsertParameters.Add("PlayerGenre", Gender.ToString());
DataSource.Insert();
}
Hi,
i have a file which consists data as below,
3
123||
456||
789||
Iam reading file using bulk insert and iam inserting these phone numbers into table having one column as below.
BULK INSERT TABLE_NAME FROM 'FILE_PATH'
WITH (KEEPNULLS,FIRSTROW=2,ROWTERMINATOR = '||')
but i want to insert the data into table having two columns. if iam trying to insert the data into table having two columns its not inserting.
can anyone help me how to do this?
Thanks,
-Badri
I'm currently stuck with a table that has 350 mil records. Querying this table is insanely slow so I had a better look at existing yearly partitioning. I already managed to partition on a month level which increased the performance/querrying a lot. I did this on the staging table where I used an alter statement to split the 2015 partition by 12 months.
However, in our project we used Data Vault. This means that we have 4 tables (hub, sathub, link, satlink), all carrying 350 mil records. The problem is that altering the partition function does not work. The server cannot handle this action. What the best way is to do this, without having to drop/reload all tables.
Hi,
If I have 2 tables (Source and Destination) which have the same fields except the fields are not in same order, what is a practical way to insert all data from Source into Destination? I know that I can do insert with select but then I need to specify every single fields since the fields positions are different between Source and Destination.
Thank you for any help.
SALAM SIR,
CREATE TABLE Airlines_Master
( Aircode CHAR(2),
Airlines_name VARCHAR(15))
THIS IS MADE A TABLE IN SQLSERVER 2000.BUT HOW CAN INSERT DATA INTO THIS TABLE?
I'm passing data into sql proc. then insert into two diffrent tables. The two table dont have 1:1 relations. I'm trying to come up with the best way to insert the values into these two table. Here is what I have-- any suggestion?
fyi. I will love the proc to check errors during the process
CRETAE PROCEDURE dbo.two_tableProc
@File1 varchar(5),
@File2 varchar(5),
@SystemDate datetime,
@RecordCt1 varchar(100)
@RecordCt2 varchar(100)
@RecordID INT
as
INSERT INTO tbl1
(
File1,
RecordCt1,
SystemDate
)
VALUES (@File1,@RecordCt1,@SystemDate)
INSERT INTO tbl2
(
File2,
RecordCt2,
RecordID
)
VALUES (@File2,@RecordCt2,@RecordID)
GO
Josephine
I tired to insert data from xml to a table .but only null value is getting inserted into the table.The query is attached below.
create table Detail_test1
(
DetailIdInt,
LaIdInt,
OcCodeVarchar,
BIdINT,
RateINT)
Declare @xml XML
set @xml='<ArrayOfBDetailLine>
[code]....