We are migrating sql server Stored Procedures from 2005 to 2012.We are facing some conflicts(Keyword changes) while migrating into 2012. We are executing each and every stored procedure and finding some keyword changes.We have nearly 2000 stored procedures. It is a time consuming process.
What are the best way to find out the changes in 2012. Anyscript(Sql server) to find out/what are the changes need to be change in 2012.
OK, I was able to successfully migrate all of my DTS packages to SSIS, for SQL 2005. I can log into intergration services and see my packages listed under:
servername --> stored packages --> msdb. Now my question is, how can I open these packages, not run them open them in a design mode like you can in SQL 2000, you can double click on the package name and view the design of the package. how can i do that now that I have them in SQL 2005?
Hello everyone,
I don't know what category would be appropriate for this question but security seems to be close enough.
I have this case scenario: I am running an automated application that extracts data from a web site and stores the data into a table on SQL server 2005. This information is not confidential in the extreme of social insurance #'s, bank account #s, but should not be seen by a typical employee (it has no use for them). After the data has been stored, it retrieves the data from the same table, processes it, and updates the same table. This application runs every hour infinitely.
Should all the insert, update, and select queries be stored under a stored procedure? I am not concern with performance. My concern would fall under design and security.
Is it worth to hide the details of inserting/updating/selecting behind a stored procedure? Or should I just allow the program to send select/update/insert SQL queries?
No employee (other then the developer and the DB admin) or customer ever access this table (They do not have permission from SQL). The username and passwords were created with security in mind.
Any thoughts or ideas?
Thanks for your time, Adrian
But it doesn't explicitly tell wherther Interpreted (disk-based) tables can be accessed by Natively compiled stored procedures.And SQL Server Express edition doesn't allow creating Memory-optimized objects to very this.
View 2 Replies View RelatedHI all,
Could any one pls suggest me how to migrate from DB2 to SQL SERVER 7.0
Thank you all..
---Chow
hi,
We have machine where SQL 2005 server is installed.Atleast 3 web applications are running on it with data size 22GB in all. We need to migrate all data/tables/groups/users from this server to another server.On target server, SQL server 2005 will be installed.After that this migration activity needs to be carried out.what are options available to migrate to target server?
Microsoft migration tool? Any already existing stored procedure etc?which is preferred solution in such case?
Thanks for help
PD
Hi All,
Greetings,
We have
sql server 7
Sqlserver ServicePack SP3
Sort Order = 32
BuildNumber 7.00.961
on Windows NT,Now we are planning to upgrade operating system from win NT machine to windows 2000.
Please let me know what and all precausion do i need to take what and what all backup should be done apart from user database.
How do i take care of the users,logins,roles, DTS Job and Replication.
Please help me in this and also any links if u have on this topic
Waiting for reply
TIA
Adil
Hello All,
Soon I shall have to migrate 2 medium sized databases from SQL server 7 to 2005.
Any words of wisdom, “how to�, “do and don’t� would be greatly appreciated.
Here are the details:
SQL 7.0 SP4, on Win2000
SQL 2005SP1,on Win2003
Sql 2005 needs to be installed on a new server (Win 2003), which will also be used as a web server (IIS6). I was thinking to go with a clean install for sql 2005 first, and after that to migrate the databases.
Thank you in advance,
Emily
Hi all,
I have script written in SQL Server 2000.
When i tried to migrate to SQL Server 2005, it is working fine in the SQL Server 2005 installed in Windows 2003 Server. System tables(syscolumns, sysobjects etc)are created in "Database->Tables->SystemTable".
But when i tried to run in SQL Server 2005 installed in Windows XP, I'm facing the following problems.
1."The object 'CK_SavedSear_LastL_4B422AD5' is dependent on column'LastLoadedTime'
"ALTER TABLE DROP COLUMN LastLoadedTime failed because one or more objects access this column"
2.Moreover none of the tables had been created in "Database->Tables->SystemTable".
In both XP and 2003 Server, While installing, i have choosen same options.
Please anybody could help me to resolve this issue.
Thanks and Regards,
Nilavu
I'm migrating 15 user databases from one server to another. The current production server is Windows 2000 Server SP4 and SQL Server 2000 Standard Edition SP4. The new production server is Windows 2003 Server and SQL Server 2000 Enterprise Edition SP4. The new server does not have the same directory structure as the current server.
I plan to detach the database, move the .mdb and .ldb files to the new server and then attach the database again. I'm not sure what to do with the master and msdb databases. Do I need to bring over the master? I know I need the msdb for all the job information. Since these are system databases, do I need to follow a different process? I want to get all these databases over to the new server so I can begin some parallel testing prior to the final cutover.
For anyone that has gone through this process, is there anything that I need to pay special attention to? Any issues moving from Windows 2000 to Windows 2003 or SQL Server 2000 Standard to SQL Server Enterprise Edition?
Any assistance would be GREAT!!!
Hi all,
I have script written in SQL Server 2000.
When i tried to migrate to SQL Server 2005, it is working fine in the SQL Server 2005 installed in Windows 2003 Server. System tables(syscolumns, sysobjects etc)are created in "Database->Tables->SystemTable".
But when i tried to run in SQL Server 2005 installed in Windows XP, I'm facing the following problems.
1."The object 'CK_SavedSear_LastL_4B422AD5' is dependent on column'LastLoadedTime'
"ALTER TABLE DROP COLUMN LastLoadedTime failed because one or more objects access this column"
2.Moreover none of the tables had been created in "Database->Tables->SystemTable".
In both XP and 2003 Server, While installing, i have choosen same options.
Please anybody could help me to resolve this issue.
Thanks and Regards,
Nilavu
Scenario
Recently moved a SQL2000 database to SQL2005.
Collation on SQL 2000 database server was SQL_Latin1_General_CP1_CI_AS
Colaltion on SQL 2005 database server is Latin1_General_CI_AS
After restoring the SQL 2000 database on SQL 2005 we observed that the database collation was SQL_Latin1_General_CP1_CI_AS. We have altered the database collation to Latin1_General_CI_AS. We understand this will work for all new objects created on the database but existing objects (prior to the collation change) will continue to have the 'SQL_Latin1_General_CP1_CI_AS' collation.
What is the best method to change the collation of the older columns to 'Latin1_General_CI_AS' -
1) Run ALTER TABLE ALTER COLUMN <colname> <datatype> COLLATE Latin1_General_CI_AS <nullability>
on each varchar/char column
or
2) For each table
BCP out data
DROP TABLE
RECREATE TABLE (taking the new collation Latin1_General_CI_AS)
BCP in data
3) Other methods?
Thanks in advance
David.
hi, i need some help here,i made a simple data driven website in my development PC, at first, i used MS Access for my data base then i migrate it to sql server express 2005, and it works fine when i try to run it in my development PC with my IIS. but of course i will be deploying it to a real server, in our office were i will deploy my data driven site, we have a PC server Win Server 2003 with SQL Server 2000 Enterprise (im not pretty sure by the name but i know its not a free version, its something like a 2000 sql version with a word enterprise at the end).so my question is, i am developing an ASPdotNET site originally used SQL server 2005 express,how can i migrate my site to the Win Server 2003 and my database from SQL Server 2005 express to SQL server 2000 enterprisewill it work?? if not, what are the possible solution that i can do in cases like mine?i used Visual Web Developer 2008 Express Ed. in making my sites, and its DOES NOT allow databases in SQL Server 2000!!!!!it says "can't recognize the database"i hope you can help me with this.Thanks-SALAMAT PO....=)
View 1 Replies View RelatedWe are in the process of Migrating our SQL Server 7.0 databases to SQL Server 2000.
We have purchased two new servers for this process.
What is the best method for the Database Migration ?
- Copy Database Wizard ?
- DTS ?
I would like to migrate an access data to SQL Server. However, the Access database has an OLE data type field that stores word documents. Is there a way to handle this in SQL Server?
View 2 Replies View RelatedHi! I have an SQL server installation with a 6.5GB database online at a particular location. I need to move the Database to another location which is a 1000 Miles away.
I have an additional physical Server at the other location which I can use to Sync the database from the original location. Can anyone please guide me to the best strategy to sync the database from the original location to the new location with minimum downtime??
Any help would be greatly appreciated.
Thanks and Regards
Anish
I want to migrate from COBOL400/AS400 to MS SQL Server, can any body tell me the way I can perform Data migration/Transfer without any loss of data
View 2 Replies View RelatedHi all
I hope you can help me in some way.
Basically for the last 5 months i've developed a SQL 2k db for my company.
All of a sudden they quite fancy using Linux on the server, therefore i would be required to use PostgreSQL instead of SQL Server 2k.
I could do with some advice about how PostgreSQL and SQL Server compare? and how much work would be involved in migrating from one to the other.
Points i've found myself and may be an issue are:
I've used some of SQL Servers XML capabilites and as far as i can tell PostgreSQL doesn't support XML.
I've made extensive use of functions that return table variables etc... is there a similar idea i can use in PostgreSQL?
Extensive use of Stored Procedures and T-SQL etc...
DTS packages. Any equivalent or similar idea?
(ps i've also posted this in the PostgreSQL but since no one replyed i was hoping the sql server boffs could help).
Hi All,
Would like to know if there is any impact on application if migrated to sql server 2005?
As of now,
We have a database setup for SQL server 2000.
Thanks
Hi All,
We are planning to move from sql server 2000 and sql server 2005.
Just want to know how well is the backward compatibility and
things that we should take care of before migration.
Thanks in advance..!!!
Hi all
Does SQL Server has any equivalent of Oracle (PL/SQL) PRAGMA AUTONOMOUS_TRANSACTION ????
I am in a process of migrating Oracle database to SQL Server. I am facing trouble in the above mentioned thing, as I cannot compromise by not putting it.
Thanks in advance
Christian
Migration from MsAccess to Sql-Server.
Problem:
Ing_ID = nz(me.Ing_AutoNr,0)
me.openform "MyForm",,,"ID = " & Ing_ID
This work in MsAccess with new records but this doesn't work in Sql-Server. How can I solve this?
Our clint need to migrate from already runner database on SQL SERVER 2005 to Oracle 9i, WHAT will be basic and important issue we will face in this term and HOW we will handle with our functions and procedures created in SQL SERVER 2005 database... ???
regards
Hello,We maintain a VB6 front-end application using an Access 2000 database. Allcode and forms are in VB6. The program also uses several queries/reportsdefined in Access. For corporate reasons we must move to SQL Server rightaway. Based on our configuration, we're hoping someone can give us a feelfor what's involved here. Since we're only using Access for the data we'renot sure what an "upsizing" would entail. Can someone point us in the rightdirection, tell us the main gotchas, etc. Thanks a lot.Teri Welch
View 7 Replies View RelatedHi,We need help on following things,1. Inputs on creating comments on the columns & Tables of a SQLDatabase & generating the sql script of that.2. Is it possible to call a .exe file in SQL server like followingcode in ORACLEcreate procedure CERT_VERIFY_PROCEDURE ( in :X Y by value )language SQL;externalname "CERT_VERIFY"location 'HOST_IMG:TEST_CALCS.EXE'with ALL logical_name translationlanguage CGENERAL parameter style3. We are using Rules for restricting data(now), We need inputswhether to use Check constraints or Rules.Thanks & Regards,Chandra Mohan
View 1 Replies View RelatedDear Friends,I am about to migrate a Visual FoX Pro 7.0 & 5.0 databases to MS SQLServer 2000. I would like toshare the experience with you, if you have undergone such a task. Isthere any utility for achievingthis.Any white paper or link for guidance on the same.I wannted to migrate the whole database to MS SQL Server 2000. Iwanted to migrate the tablestructures and procedures to MS SQL Server 2000.Please shed some light please.RegardsKumar
View 1 Replies View RelatedHow can I change the MySQL code to SQL Server's like below?
I could not find out to change appropriate UNSIGNED keyword and ENUM
keyword in SQL Server.
CREATE TABLE myTable (
id INT UNSIGNED NOT NULL,
name CHAR(20),
role ENUM('ADMIN','USER','GUEST','UNKNOWN') DEFAULT 'ADMIN'
PRIMARY KEY(id)
);
We are currently on SQL Server 2000. We have another server that has SQL SERVER 2005. The exisiting SQL SERVER 2005, is a production server, used for Reports in SSRS 2005 In the next 2 mths, we need to migrate our dbs to SQL Server 2005. First off, I would like to TEST and ensure all the dbs/pkgs etc run fine in 2005 before I go live .
I need to know how do I get started with TESTING this, i.e. how do I move the dbs from existing 2000 server to sql server 2005?
I€™m currently evaluating SQL Server 2005 to what advantages there would be to upgrading from SQL Server 2000. Our existing systems make much use of DTS so it critical for us to be able to run SQL Server 2000 DTS packages in SQL Server 2005. Having installed the Enterprise SQL Server 2005 CTP successfully on a new Windows 2003 server and following the advice to install Legacy Components I find the Migration Wizard (under Legacy> Data Transformation Services) fails with the following error after entering source and target dialogs: This wizard will close because it encountered the following error: Additional Information: Index was out of range. Must be non-negative and less than the size of the collection. Parameter name: index (mscorlib) Also when trying to open a structured storage DTS file I incur another error: Unable to load DTS 2000 Runtime. This component may have not been installed (Microsoft.SqlServer.DtsObjectExplorerUI) This error seems to imply that the DTS 2000 Runtime needs installing. Can this component be downloaded and installed separately?
View 5 Replies View Related
We recentely tried migrating our databases from 2000 to sql server
2005.The migrated databases had some issues like collation issues,so
we created the scripts for each databases and then updated these
scripts to remove collation issues to make these compatible to SQL
server 2005.
But we have some permission issues for the users in case of these
created databases i.e. we are unable to see all the tables with
ssupdate user id ,or any other id .except the dbo id
which is the owner of this database,where we can see all the tables
and stored procedures.
iam fairly new at sql server .does anyone have any suggestions or
critcisms ?
you are welcome.
I am in the process of migrating 40 access databases to SQL Server. I am migrating the tables to the backend. All of these databases are Identical in structure and purpose. The goal is to centralize all of the databases backends into one Sql server database, but the data needs to stay seperated by each location. So I added a location field to each table in the database; so that each locations data will be seperated by location. How do I go about filtering out the the data so that each location can only update, delete, an view their own data? (I dont mind a long answer.)
View 3 Replies View RelatedHelp needed with Issue's related to side by side migration of SQL Server 7 to SQL Server 2005
View 4 Replies View Relatedgot some MS Access SQL Code that needs converting into TSQL:
SELECT dbo_qryMyServices.FormsServiceID,
dbo_qryMyServices.ServiceName, Sum(IIf(IsNull([CompletionDate]),0,1))
AS Completed,
Count([pkServiceID])-Sum(IIf(IsNull([CompletionDate]),0,1)) AS
Uncompleted, Count(dbo_MyServiceRequests.pkServiceID) AS TotalCount
FROM dbo_qryMyServices LEFT JOIN dbo_MyServiceRequests ON dbo_qryMyServices.FormsServiceID = dbo_MyServiceRequests.PostType
GROUP BY dbo_qryMyServices.FormsServiceID, dbo_qryMyServices.ServiceName
ORDER BY dbo_qryMyServices.ServiceName;
because it's Access and got VBA stuff in it - IIF and ISNULL, I can't figure out how to make it work in proper SQL.
Any help would be most appreciated!