DB Design :: Update List Of Records In A Table With New Value Depending On Old Value
Jun 15, 2015
I have a table called acc1152 with the field accno. depending on what the value of this field is, i need to replace it with a new value. These are the values i need to update
old value new value
7007 4007
7008 4008
4008 7
7009 4009
7011 4011
4011 ' '
7010 4010
4010 1
7016 4016
4016 1
4506 4006
4512 4012
how do I write one query that will accomplish this?
View 3 Replies
ADVERTISEMENT
Apr 26, 2008
need help please on update only if .
i need to update only the field "val_holiday " (in table B from table A)
and olso to check on table B the "ID" + "new_date" only if exist
and update the field "val_holiday " (in table B)
and at the end of update change the field "field_check_update_if _ok" from 0 to 1
only the row that update in table B
select from table A
update table B
WHERE ..........................HOW ?
----------------------------------------------------------------- table A
ID fname new_date val_holiday field_check_update_if _ok
---------------------------------------------------------------------------------------------------
111 aaaa 15/03/2008 999 0
111 aaaa 16/03/2008 888 0
111 aaaa 18/03/2008 77 0
111 aaaa 19/03/2008 9 0
111 aaaa 20/03/2008 111 0
111 aaaa 21/03/2008 12 0
222 bbb 02/05/2008 15 0
222 bbb 03/05/2008 16 0
222 bbb 04/05/2008 9 0
222 bbb 05/05/2008 3 0
222 bbb 06/05/2008 90 0
222 bbb 07/05/2008 3 0
222 bbb 08/05/2008 3 0
222 bbb 09/05/2008 3 0
333 ccc 03/04/2008 4 0
333 ccc 04/04/2008 4 0
----------------------------------------------------------------- table B
ID fname new_date val_holiday
----------------------------------------------------
111 aaaa 15/03/2008 1
111 aaaa 16/03/2008 1
111 aaaa 18/03/2008 1
111 aaaa 19/03/2008 1
111 aaaa 20/03/2008 1
111 aaaa 21/03/2008 1
222 bbb 02/05/2008 3
222 bbb 03/05/2008 3
222 bbb 04/05/2008 3
222 bbb 05/05/2008 3
222 bbb 06/05/2008 3
222 bbb 07/05/2008 3
222 bbb 08/05/2008 3
222 bbb 09/05/2008 3
333 ccc 03/04/2008 4
333 ccc 04/04/2008 4
------------------------------------------------------------------------------
TNX for the help and for all
View 1 Replies
View Related
Apr 25, 2008
need help please on update only if .
i need to update only the field "val_holiday " (in table B from table A)
and olso to check on table B the "ID" + "new_date" only if exist
and update the field "val_holiday " (in table B)
and at the end of update change the field "field_check_update_if _ok" from 0 to 1
only the row that update in table B
Code Snippet
select from table A
update table B
WHERE ..........................HOW ?
----------------------------------------------------------------- table A
ID fname new_date val_holiday field_check_update_if _ok
---------------------------------------------------------------------------------------------------
111 aaaa 15/03/2008 999 0
111 aaaa 16/03/2008 888 0
111 aaaa 18/03/2008 77 0
111 aaaa 19/03/2008 9 0
111 aaaa 20/03/2008 111 0
111 aaaa 21/03/2008 12 0
222 bbb 02/05/2008 15 0
222 bbb 03/05/2008 16 0
222 bbb 04/05/2008 9 0
222 bbb 05/05/2008 3 0
222 bbb 06/05/2008 90 0
222 bbb 07/05/2008 3 0
222 bbb 08/05/2008 3 0
222 bbb 09/05/2008 3 0
333 ccc 03/04/2008 4 0
333 ccc 04/04/2008 4 0
----------------------------------------------------------------- table B
ID fname new_date val_holiday
----------------------------------------------------
111 aaaa 15/03/2008 1
111 aaaa 16/03/2008 1
111 aaaa 18/03/2008 1
111 aaaa 19/03/2008 1
111 aaaa 20/03/2008 1
111 aaaa 21/03/2008 1
222 bbb 02/05/2008 3
222 bbb 03/05/2008 3
222 bbb 04/05/2008 3
222 bbb 05/05/2008 3
222 bbb 06/05/2008 3
222 bbb 07/05/2008 3
222 bbb 08/05/2008 3
222 bbb 09/05/2008 3
333 ccc 03/04/2008 4
333 ccc 04/04/2008 4
------------------------------------------------------------------------------
TNX for the help and for all
View 5 Replies
View Related
Jul 27, 2004
Hi there,
Is there a quick way to list all the tables in a DB that contain a certain column name?
Thanks
S
View 5 Replies
View Related
Aug 24, 2015
I want to get all the records from the table.
What is the query to get all the records from the database?
View 4 Replies
View Related
May 6, 2015
We need to Insert/Update a Fact Table from staging Table. currently we are using a SP which update Fact Table for Each region. this process is schedule, every 5 min job is run and Update fact table.but time of Insert and Update too long from staging to Fact, currently we are using merge statement for Insert and update.in my sp we are looping number how many region we need to update and at a time single Region we are updating using while loop in current SP.
View 7 Replies
View Related
Sep 16, 2015
I have a scenario where I have to Update a table with date when there are new records in another table
For example:
I load ODS table with the data from a file in SSIS. the file has CustomerID and other columns.
Now, when there is new record for any customerID in Ods, then Update the dbo table with the most recent record for every CustomerID(i.e. update the date column in dbo for that customerID). Also Include an Identifier that relates back to the ODS table. How do I do this?
View 8 Replies
View Related
May 19, 2014
I am trying to update one table when records are inserted in another table.
I have added the following trigger to the table “ProdTr” and every time a record is added I want to update the field “Qty3” in the table “ActInf” with a value from the inserted record.
My problem appears to be that I am unable to fill the variables with values, and I cannot understand why it isn’t working, my code is:
ALTER trigger [dbo].[antall_liter] on [dbo].[ProdTr]
for insert
as
begin
declare @liter as decimal(28,6)
[Code] ....
View 4 Replies
View Related
Sep 23, 2013
I'm having a problem with the syntax for doing an update to the top 25 records in my table.... This is what i have...
UPDATE TOP (25) FROM ud402.jd_mcp_master SET comments = 'MONDAY 092313 ' WHERE QUEUE_NAME = 'JD_Testing' ORDER BY DATE_WORKED ;
View 8 Replies
View Related
Apr 23, 2008
I'm using SQL Server 2000.
I have a table with data similar to this.... Multi field = 0 indicates current record, 1 indicates an old record
FWK NVQ Multi Key Start Date NVQ Date FWK Date
NULL NULL 0 123456 03/04/2006 NULL NULL
NULL NULL 1 123456 03/04/2005 01/09/2006 NULL
NULL NULL 0 234567 03/04/2006 NULL NULL
NULL NULL 1 234567 03/06/2005 04/10/2005 03/11/2005
NULL NULL 0 345678 03/04/2004 NULL NULL
NULL NULL 1 345678 03/07/2003 NULL 01/12/2003
NULL NULL 1 345678 03/08/2002 NULL NULL
NULL NULL 0 456789 30/09/2002 11/06/2003 NULL
NULL NULL 1 456789 29/08/2000 NULL NULL
NULL NULL 0 567890 30/09/2002 11/06/2003 11/06/2003
NULL NULL 1 567890 29/08/2000 30/05/2001 NULL
NULL NULL 0 678901 03/04/2006 01/09/2006 15/09/2006
NULL NULL 1 678901 30/03/2005 30/08/2005 15/08/2005
NULL NULL 0 789012 02/03/2000 03/09/2000 15/09/2000
NULL NULL 0 789013 30/06/2001 07/08/2001 14/08/2001
I need to update the table, setting the first two columns to the date of the old records... ie. I want the table to look like this...
FWK NVQ Multi Key Start Date NVQ Date FWK Date
NULL 01/09/2006 0 123456 03/04/2006 NULL NULL
NULL NULL 1 123456 03/04/2005 01/09/2006 NULL
03/11/2005 04/10/2005 0 234567 03/04/2006 NULL NULL
NULL NULL 1 234567 03/06/2005 04/10/2005 03/11/2005
01/12/2003 NULL 0 345678 03/04/2004 NULL NULL
NULL NULL 1 345678 03/07/2003 NULL 01/12/2003
NULL NULL 1 345678 03/08/2002 NULL NULL
NULL NULL 0 456789 30/09/2002 11/06/2003 NULL
NULL NULL 1 456789 29/08/2000 NULL NULL
NULL 30/05/2001 0 567890 30/09/2002 11/06/2003 11/06/2003
NULL NULL 1 567890 29/08/2000 30/05/2001 NULL
15/08/2005 30/08/2005 0 678901 03/04/2006 01/09/2006 15/09/2006
NULL NULL 1 678901 30/03/2005 30/08/2005 15/08/2005
NULL NULL 0 789012 02/03/2000 03/09/2000 15/09/2000
NULL NULL 0 789013 30/06/2001 07/08/2001 14/08/2001
Can anyone help me with this?
Jon
Code Snippet
DECLARE @TABLE_JR TABLE
([FWK] datetime,
[NVQ] datetime,
[Multi] Smallint,
[Key] varchar(10),
[Start Date] datetime,
[NVQ Date] datetime,
[FWK Date] datetime)
INSERT INTO @TABLE_JR VALUES (null,null,0,'123456','2006-04-03',null,null)
INSERT INTO @TABLE_JR VALUES (null,null,1,'123456','2005-04-03','2006-09-01',null)
INSERT INTO @TABLE_JR VALUES (null,null,0,'234567','2006-04-03',null,null)
INSERT INTO @TABLE_JR VALUES (null,null,1,'234567','2005-06-03','2005-10-04','2005-11-03')
INSERT INTO @TABLE_JR VALUES (null,null,0,'345678','2004-04-03',null,null )
INSERT INTO @TABLE_JR VALUES (null,null,1,'345678','2003-07-03',null,'2003-12-01' )
INSERT INTO @TABLE_JR VALUES (null,null,1,'345678','2002-08-03',null,null )
INSERT INTO @TABLE_JR VALUES (null,null,0,'456789','2002-09-30','2003-06-11',null)
INSERT INTO @TABLE_JR VALUES (null,null,1,'456789','2000-08-29',null,null)
INSERT INTO @TABLE_JR VALUES (null,null,0,'567890','2002-09-30','2003-06-11','2003-06-11')
INSERT INTO @TABLE_JR VALUES (null,null,1,'567890','2000-08-29','2001-05-30',null)
INSERT INTO @TABLE_JR VALUES (null,null,0,'678901','2006-04-03','2006-09-01','2006-09-15')
INSERT INTO @TABLE_JR VALUES (null,null,1,'678901','2005-03-30','2005-08-30','2005-08-15')
INSERT INTO @TABLE_JR VALUES (null,null,0,'789012','2000-03-02','2000-09-03','2000-09-15')
INSERT INTO @TABLE_JR VALUES (null,null,0,'789013','2001-06-30','2001-08-07','2001-08-14')
View 7 Replies
View Related
Jun 25, 2013
I need to update the result depending upon the count of distinct entries.
Example
ID Employee Region State
1 ABC AMEA MI
2 DEF AMEA MI
3 XYZ APAC TX
I want the result as below
ID Employee Region State
1 ABC AMEA MI-1
2 DEF AMEA MI-2
3 XYZ APAC TX
since the count of Region is 2
I tried using DECLARE @intFlag INT and stuff but wasn't able to get the solution.
View 2 Replies
View Related
Sep 5, 2015
How to update tblA with records from tblB (see below expected results) when they have common column DrawingNo?
View 4 Replies
View Related
Sep 20, 2011
I want to update table2.message based on the criteria of table1.name. for example, all records named John will be updated with 'Msg1' in table 2.message. I am using MS SQL 2000 and below is the scenario.
table1 columns
ID
Name
table2 columns
ID
Message
Select a.Id, a.name, b.message
from table1 a, table2 b
where a.id =b.id
a.id a.name b.message
1 John Msg1
2 Steve Msg2
3 Scott Msg3
4 John NULL - update b.message to 'Msg1'
5 Steve NULL - update b.message to 'Msg2'
6 Scott NULL - update b.message to 'Msg3'
7 John NULL - update b.message to 'Msg1'
8 Steve NULL - update b.message to 'Msg2'
If i will update the record per name i am using the query below and i am pre-selecting all the existing names.
update table2 b
set b.message=(Select top 1 b.message
from table1 a, table2 b
where a.id =b.id
[Code] ...
How to update this in bulk without preselecting all the names?
View 7 Replies
View Related
Sep 20, 2007
Hi
I have a two tables as follows
Table Category
{
ID PK,
LastUpdate DateTime
}
Table Master
{
ID PK
Catrgory DateTime
}
I wanted to update Catrgory coulmn of all records in the Master table with the Value of LastUpdate of the CategoryTable the where the ID of the both the table are same
Can any one please let me know the query
~Mohan
View 8 Replies
View Related
Oct 22, 2015
Every day the timestamp is changed on all rows in one of the table(table has 1 mio records).
What is the best way to find out which query is doing this?
Could be also query which updates only one record(or couple of them) but is executed for each record once.
I have been looking sys.dm_exec_query_stats and sys.dm_exec_sql_text for past but couldn't find.
I can't use event notifications since there is service broker disabled.
View 5 Replies
View Related
May 6, 2007
Hi,
I have a set of records in database table and I want to update one column to be the same for all of them.
Can you suggest code solution?
View 1 Replies
View Related
Jun 13, 2007
Hello,
I have been serching for weeks to resolve this problem. I am new to ASP.NET and trying to make the migration from ASP which I have programmed in for years. I am using Microsoft Visual Web Developer 2005 Express Edition and SQL Express Edtion. I have been working through the Microsoft Video Training at http://msdn.microsoft.com/vstudio/express/beginner/learningpath/ and created a web site using Tier 3 Lesson 8 as the model. My new web site which is a simple phone book applicaiton lets me read the table and select the record without any problem. But the update form lets me edit but when I attempt to Apply the update I get the following error.
Server Error in '/Phonebook' Application.
ObjectDataSource 'ObjectDataSource1' could not find a non-generic method 'Update' that has parameters: FirstName, LastName, PhoneNumber, BossGroup, Department, BossPickup, ShowInPhonebook, Type, Original_FirstName, Original_LastName, Original_PhoneNumber, Original_BossGroup, Original_Department, Original_BossPickup, Original_ShowInPhoneBook, Original_Type, Original_ItemID.
Description: An unhundled expception occured during the execution of the current web request. Please review the stack trace for more information about the error and where it originiated in the code.
The Stack Trace basiclly showes the same error as above.
Also, when I attempt to delete the record I do not get an error but the record does not delete.
What is interesting is that I can add a record so I do not believe that it is a security permissions issue. I have the ISS Authinication Method Enable Anonymous Access set on with full control.
If anyone has any insight as to why this is occuring please let me know.
View 13 Replies
View Related
Oct 18, 2014
I have the following table
Code:
10012014-09-01 00:00:00.000BH1-Z-1280180
20012014-09-01 00:00:00.000BH1-Z-9990300
30012014-09-01 00:00:00.000CHO1-Z-1280180
40012014-09-01 00:00:00.000CHO1-Z-9990306
50012014-09-01 00:00:00.000OT11-Z-99906
60012014-09-01 00:00:00.000WRK1-Z-1280180
70012014-09-01 00:00:00.000WRK1-Z-9990306
80022014-09-01 00:00:00.000BH1-Z-0800480
90022014-09-01 00:00:00.000CHO1-Z-0800480
100022014-09-01 00:00:00.000WRK1-Z-0800480
110022014-09-02 00:00:00.000BH1-Z-0800480
120022014-09-02 00:00:00.000CHO1-Z-0800600
130022014-09-02 00:00:00.000OT11-Z-0800120
140022014-09-02 00:00:00.000WRK1-Z-0800600
150012014-09-02 00:00:00.000BH1-Z-1280480
160012014-09-02 00:00:00.000CHO1-Z-1280480
What I want to do is update the table so that it populates the PERCENTAGE column on an empref/hrscode/date basis based on the sum of the WRK hours per day and empref.
EG for 2014-09-01 for empref 001 the result would be
Code:
0012014-09-01 00:00:00.000BH1-Z-12837.037180
0012014-09-01 00:00:00.000BH1-Z-99961.728300
0012014-09-01 00:00:00.000CHO1-Z-12837.037180
0012014-09-01 00:00:00.000CHO1-Z-99962.963306
0012014-09-01 00:00:00.000OT11-Z-9991.2356
0012014-09-01 00:00:00.000WRK1-Z-12837.037180
0012014-09-01 00:00:00.000WRK1-Z-99962.963306
IE Sum WRK = 486 so 180 is 37.037 percentage. Each HRSCODE hours total should total 100% (37.037 + 61.728)
I can write a query to do this individually but how can I so this as a query for the full table.
Code:
declare @@total as float
set @@total=(select SUM(hours) from tmsuser.tmswrhrs where hrscode='worked' and empref='001' and '2014-09-01 00:00:00.000'=procdate)
update tmsuser.TMSWRHRS set PTAS1=(Str(((hours/@@TOTAL*100)),12,3)) where empref='001' and '2014-09-01 00:00:00.000'=procdate
View 2 Replies
View Related
Oct 18, 2014
I have the following table
10012014-09-01 00:00:00.000BH1-Z-1280180
20012014-09-01 00:00:00.000BH1-Z-9990300
30012014-09-01 00:00:00.000CHO1-Z-1280180
40012014-09-01 00:00:00.000CHO1-Z-9990306
50012014-09-01 00:00:00.000OT11-Z-99906
[Code] ....
What I want to do is update the table so that it populates the PERCENTAGE column on an empref/hrscode/date basis based on the sum of the WRK hours per day and empref.
EG for 2014-09-01 for empref 001 the result would be
0012014-09-01 00:00:00.000BH1-Z-12837.037180
0012014-09-01 00:00:00.000BH1-Z-99961.728300
0012014-09-01 00:00:00.000CHO1-Z-12837.037180
0012014-09-01 00:00:00.000CHO1-Z-99962.963306
0012014-09-01 00:00:00.000OT11-Z-9991.2356
0012014-09-01 00:00:00.000WRK1-Z-12837.037180
0012014-09-01 00:00:00.000WRK1-Z-99962.963306
IE Sum WRK = 486 so 180 is 37.037 percentage. Each HRSCODE hours total should total 100% (37.037 + 61.728)
I can write a query to do this individually but how can I so this as a query for the full table.
declare @@total as float
set @@total=(select SUM(hours) from tmsuser.tmswrhrs where hrscode='worked' and empref='001' and '2014-09-01 00:00:00.000'=procdate)
update tmsuser.TMSWRHRS set PTAS1=(Str(((hours/@@TOTAL*100)),12,3)) where empref='001' and '2014-09-01 00:00:00.000'=procdate
View 1 Replies
View Related
Jul 23, 2015
I need to update more than one record at once. I have ~ 100 records that I have to update and don't want to execute query 100 times.
My query looks like this:
Update Table1
Set Table1.field1 = ( select Table2.field1 from Table2 where Table2.field2 IN ('a', 'b', 'c')
where Table1.field2 IN ( 'a', 'b', 'c')
It obviously failed because subquery returned more than one value and error message stated that I can't use '=' operator in this case.
My question: how could I update the same column from many records in one execution?
View 10 Replies
View Related
May 24, 2013
I am trying to update a parent table with a summation of its child records. The child records are being deleted because the transaction has become invalid because payment was made with a bad check or there was a posting error. So a rollback of sorts is required.
Here are is the DDL for the tables and DML for the data:
Code:
DECLARE @t1 TABLE
(
[Year] int NOT NULL,
[Parcel] varchar(13) NOT NULL,
[InterestDateTime] datetime NULL,
[Principal] decimal(12, 2) NULL,
[Penalty] decimal(12, 2) NULL,
[Code] ....
I tried to use a Merge statement with an ON MATCH for each TransType, but it complained that I could not have multiple update statements. OK. So I tried a MERGE with single update statement with a case and it complained that I was updating the same parent multiple times, which I was and want to! So, I tried the following update statement and it still does not work, though no error message.
Code:
update t1 set
t1.Principal = t1.Principal + (case when t2.TransType = 'R' then t2.Payment else 0 end),
t1.Penalty = t1.Penalty + (case when t2.TransType = 'P' then t2.Payment else 0 end),
t1.Interest = t1.Interest + (case when t2.TransType = 'I' then t2.Payment else 0 end)
from @t1 t1
inner join @t2 t2 on t2.YEAR = t1.YEAR and t2.Parcel = t1.Parcel
I am expecting the following after the update:
Code:
Select * from @t1
201200000018092013-03-14 00:00:00.000 211.15 10.00 3.14
201100000018092013-03-14 00:00:00.000 206.12 10.00 18.20
201000000018092013-03-14 00:00:00.000 219.41 10.00 35.37
200900000018092013-03-14 00:00:00.000 0.00 0.00 0.00
2012000001808X2013-03-14 00:00:00.000 9.65 0.00 0.06
2011000001808X2013-03-14 00:00:00.000 378.70 10.00 32.73
2010000001808X2013-03-14 00:00:00.000 0.00 0.00 0.00
2009000001808X2013-03-14 00:00:00.000 341.96 3.00 142.74
All I am getting are the original values.
View 14 Replies
View Related
Jun 12, 2014
I want to update records in 1 table with the result of a select statement.
The table is called 'MPR_Portfolio_Transactions' and contains the following fields:
[PTR_SEQUENCE]
,[PTR_DATE]
,[PTR_SYMBOL]
,[PTR_QUANTITY]
,[PTR_ACUM]
And the select statement is like this:
SELECT SUM(PTR_QUANTITY) OVER (PARTITION BY PTR_SYMBOL ORDER BY PTR_DATE, PTR_SEQUENCE) AS 'ACUMULADO'
FROM MPR_portfolio_transactions
ORDER BY PTR_SYMBOL, PTR_DATE, PTR_SEQUENCE
This select statement generates one line per existing record. And what I would like to do next is to UPDATE the field 'PTR_ACUM' with the result of the 'ACUMULADO'
the key is PTR_SEQUENCE
View 3 Replies
View Related
Nov 19, 2015
I want to update the STATUS column based on min date in my table.
For example – If minimum BOOKING_DATE of any RecieptID is below to 2015-10-01, then Status of that RecieptID should be 0 for all records pertaining to dedicated RecieptID So I need an output in this way.
View 3 Replies
View Related
Jun 20, 2005
I am trying to update all recors in one table with records from another table. My script is only updating one record. How do I fix this? This is what I have:
Code:
set rec1=con.execute ("SELECT * FROM Cancels ORDER BY Canceldate ASC")
rec2 = "update FC2003copy SET LPCancelDate = '" & rec1("canceldate") & "'" & _
"where CaseNum= '" & rec1("CaseNum") & "'"
Con.Execute(rec2)
View 1 Replies
View Related
Feb 27, 2008
Hi,
can any one tell me how to update data from one table to another table.
Thanks,
View 3 Replies
View Related
Mar 6, 2008
Hi..
I am getting a xml stream of data and putting it to a object and then calling a big sproc to insert or update data in many tables across my database... But there is one Table that i am having trouble inserting it.. But if i run an update it works fine... This my code for that part of the sproc..
IF Exists(
SELECT
*
FROM
PlanEligibility
WHERE
PlanId = @PlanId
) BEGIN
UPDATE
PlanEligibility
SET
LengthOfService = Case When @PD_EmployeeContribution = 0 Then @rsLengthOfServicePS
ELSE @rsLengthOfService END,
EligibilityAge = CASE When @PD_EmployeeContribution = 0 Then @EligibilityAgePS Else @EligibilityAge End,
EntryDates = @EntryDates,
EligiDifferentRequirementsMatch = Case When @PD_EmployeeContribution = 0 Then 0
When @PD_EmployeeContribution = 1 and @PD_EmployerContribution = 0 then 0 Else 1 END, --@CompMatchM,
LengthOfServiceMatch = CASE When @MCompanyMatch = 0 Then @rsLengthOfServicePs ELSE @rsLengthOfServiceMatch END,
EligibilityAgeMatch = CASE When @MCompanyMatch = 0 Then @EligibilityAgePS ELSE @EligibilityAgeMatch END,
OtherEmployeeExclusions = @OtherEmployeeExclusions
WHERE
PlanId = @PlanId
END
ELSE BEGIN
INSERT INTO PlanEligibility
(
PlanId,
LengthOfService,
EligibilityAge,
EntryDates,
EligiDifferentRequirementsMatch,
LengthOfServiceMatch,
EligibilityAgeMatch,
OtherEmployeeExclusions
)
VALUES
(
@PlanId,
Case When @PD_EmployeeContribution = 0 Then @rsLengthOfServicePS
ELSE @rsLengthOfService END,--@rsLengthOfService,
CASE When @PD_EmployeeContribution = 0 Then @EligibilityAgePS Else @EligibilityAge End, --@EligibilityAge,
@EntryDates,
Case When @PD_EmployeeContribution = 0 Then 0
When @PD_EmployeeContribution = 1 and @PD_EmployerContribution = 0 then 0 Else 1 END, --having trouble here
CASE When @MCompanyMatch = 0 Then @rsLengthOfServicePs ELSE @rsLengthOfServiceMatch END,
CASE When @MCompanyMatch = 0 Then @EligibilityAgePS ELSE @EligibilityAgeMatch END, --EligibilityAgeMatch,@EligibilityAgeMatch,
@OtherEmployeeExclusions
)
END
Any help will be appreciated..
Regards,
Karen
View 6 Replies
View Related
Mar 12, 2015
We are facing a weird scenario in which the snapshot is getting corrupted after insertupdate few million records in to a table .
SQL Server 2012
windows server 2008 R2
service pack 1
64-bit OS
View 1 Replies
View Related
Mar 28, 2015
Our system runs a SQL Server 2012 DB, it has a table (table_a) which has over 10M records. Our system have to receive data file from previous system daily which contains approximate 3M updated or new records for table_a. My job is to update table_a with the new data.
The initial solution is:
1 Create a table (table_b) which structur is as the same as table_a
2 Use BCP to import updated records into table_b
3 Remove outdated data in table_a:
delete from table_a inner join table_b on table_a.key_fileds = table_b.key_fields
4 Append updated or new data into table_a:
insert into table_a select * from table_b
As the test result, this solution is very inefficient. Step 3 costs several hours, e.g. How can I improve it?
View 9 Replies
View Related
Jul 23, 2005
Hello all,I have two tables - Projects and ProjectStructTable Projects contains master records of the projects, ProjectStructallows to define a project herarchie and contains the fieldsPrjStructId, ProjectId, PrjStructName, ..., ParentIdPrjStructParent contains a reference to the parent or to itselves ifrecord is top-level-record for a project.I try to create a trigger on table Projects (INSERT) whichautomatically creates the top-level-entry in ProjectStruct but Ididn't succed.Tried to use (several variations similar to)INSERT INTO ProjectStruct (ProjectId, PrjStructName, ParentId)SELECT prjProjectId, 'top-level',IDENT_CURRENT('ProjectStruct'))FROM INSERTEDbut this inserts a reference to the last inserted record. Why thishappens is pretty clear to me, but I found no way to get the referenceto the identity column of the record currently inserted.Is there a way to do this?
View 7 Replies
View Related
Dec 3, 2007
In a package we have statements pointing to 2(or more) different databases on the server. When moving between environments, is there an easy way to change statements like:
UPDATE t1
SET t1.name = t2.name,
t1.age = t2.age
FROM DB1..Person t1
INNER JOIN DB2..PersonToo t2
ON t1.PersonID = t2.PersonID
I can think only of building the statements replacing the database names with variables, but that's not an easy way. I do not know how to use package variables in this situation.
1 way of doing this may be by using a Lookup or Conditional Split and use the resulting dataflow in a SP or such to update, using parameters...
It all sounds very messy, and I still don't know how
Any ideas?
TIA,
View 7 Replies
View Related
Apr 21, 2015
I am currently working with C and SQL Server 2012. My requirement is to Bulk fetch the records and Insert/Update the same in the other table with some business logic? How do i do this?
View 14 Replies
View Related
Oct 28, 2007
Hi,
I am new to SSRS.
I have created simple report using reporting services, In which i am using one List element and inside that 8 text boxes and a table, in which 4 texboxes is used as lable and remain 4 textbos is value from dataset and table displays details as below for each unquie call number with table header marked in red color. When i click preview i get below report(Report 1) for call number 4 and 10 records in table which is under list. But for call number 4 still 6 records as to be display in next page with text boxe element which marked in Green color in Report 1. Now i am getting report with out List element i.e (Report 2 given below )
Report generated for Call numnber 4 (on click of preview ) (Report 1)
Generated Report
Call No
4
CallDate
2/2/2007
Customer Name
ZINDAL STEEL P . LTD
Address
Chennai
SL Number
PartNumber
PartName
Qty
Rate
Amount
1
12345
SCREWS
100
10
1000
2
47555
BOLTS
200
25
5000
3
125453
RIVETS
300
40
12000
4
15786
RATCHETS
500
23
11500
5
15566
TORQUE WRENCH
600
45
27000
10
5456
HARMONIZATION TOOL
700
45
31500
(Report 2)
Report generated for Same Call number 4 in next page with out List element, In this page i want display the same textboes and values which are marked in green color.(This 6 records alos belongs to same call Number 4 )
SL Number
PartNumber
PartName
Qty
Rate
Amount
11
12345
SCREWS 6"
100
10
1000
12
47555
BOLTS 5"
200
25
5000
13
125453
RIVETS 5"
300
40
12000
14
15786
RATCHETS Big
500
23
11500
15
15566
TORQUE WRENCH Small
600
45
27000
16
5456
HARMONIZATION TOOL
700
45
31500
Can any one please guide me how to do this kind of desing.
Thanks and regards
Manju
View 2 Replies
View Related
May 12, 2008
To maximize the number of names and phone numbers we can fit on a page, we'd like to have three or four columns of LastName, FirstName, Number on each page. The first column starts with the A's and goes down until the bottom of the page then goes back up to the top of the page in the second column. When the maximum number of columns (probably 3 or 4) is reached for one page, it starts again in the first column of the second page.
This is what we're looking for...
.style1
{width:83px;}
.style2
{width:77px;}
.style3
{width:65px;}
.style5
{width:82px;}
.style6
{width:79px;}
.style7
{width:62px;}
.style9
{width:71px;}
.style10
{width:70px;}
.style11
{width:113px;}
.style12
{width:129px;}
.style13
{width:70px;font-weight:bold;}
.style14
{width:71px;font-weight:bold;}
.style15
{width:129px;font-weight:bold;}
.style16
{width:62px;font-weight:bold;}
.style17
{width:79px;font-weight:bold;}
.style18
{width:82px;font-weight:bold;}
.style19
{width:113px;font-weight:bold;}
.style20
{width:65px;font-weight:bold;}
.style21
{width:77px;font-weight:bold;}
.style22
{width:83px;font-weight:bold;}
Page 1
LastName
FirstName
Number
LastName
FirstName
Number
LastName
FirstName
Number
Anderson
Fred
1234
Dalton
Mike
4567
Gladden
Tony
7890
Bailey
George
2345
Earl
Beth
5678
Hanks
Marideth
8901
Cox
Natalie
3456
Flake
Spencer
6789
Ingersol
Grace
9012
Page 2
LastName
FirstName
Number
LastName
FirstName
Number
LastName
FirstName
Number
Jackson
Frank
9234
Morrison
Ty
9567
Peters
Hank
9890
Klark
Missy
9345
Nickels
Al
9678
Quinn
Andy
9901
Little
Blake
9456
Oxnard
Will
9789
Rand
Phil
9112
Of course, it will take more rows of data to fill up a page, but this shows the basic idea of what we're trying to accomplish.
Does anyone know how to do this?
Thanks.
View 4 Replies
View Related
