DB Design :: Log Shipping Alert Job Showing Error 14220
Jun 3, 2015
my database is already deleted and there is no job are running for that database .previously we configure a log shipping for that database and deleted.log shipping backup job also deleted.the log shipping alert job is throwing bellow error.
The log shipping primary database tes1 has backup threshold of 60 minutes and has not performed a backup log operation for 132722 minutes. Check agent log and logshipping monitor information.
View 4 Replies
ADVERTISEMENT
Nov 28, 2007
I have log shipping every 15 minutes working between 2 servers, and while the secondary server reports everything ok (time since last copy, restore are all under 15 minutes), the primary server reports that the time since last backup is 7400+ minutes. I have verified that the LS backup job has no failures. How can I correct this false error state and get the primary server to start reporting actual statuses?
The LS monitor is on the secondary server.
View 9 Replies
View Related
Nov 8, 2006
I have an error 14421 (database has restore threshold for 45 minutes and has not restored in more than "so many" minutes)firing for a database that no longer exists. How can I remove this alert? I have other log shipping plans that are running and so I can't delete the Log shipping alert job.
View 4 Replies
View Related
Mar 17, 2014
I've configured log shipping to use for DR purposes. I'm concerned that the physical location of the secondary is mis-reported by SQL Server Management Studio.
Viewing the secondary location (with Studio DB_name Properties Files) shows the path of the primary DB (I expected it to show the path of the secondary).
This SQL command shows the correct/actual paths of both primary and secondary DB's when run on their host servers.
SELECT name, physical_name AS CurrentLocation, state_desc FROM sys.master_files
Is this just cosmetic?
Here is an Example of how the Studio shows the incorrect path for the secondary.
Example:
(Primary) servername=prodSrv, DBname=aquaDB, Actual_Path=G:aquaDB, SQL-studio-Properties-Path=G:AquaDB, sys.master_files Path=G:AquaDB,
Log shipped to
(Secondary / Read Only) servername=DRSrv, DBname=aquaDB, Actual Path=F:aquaDR, SQL-studio-Properties-Path=G:AquaDB(WRONG), sys.master_files Path=F:aquaDR
View 2 Replies
View Related
Jul 15, 2015
I have a series of indexes that are showing as statistics. Is it because they are filtered or are defined as constraints?
View 5 Replies
View Related
Nov 26, 2007
hi
i have aques tion about mining model and time series after predicting
how can i show the result of the prediction in the c# form
and why i cant use the all of the prediction function in the mining
model prediction for time series and how i can see the script of the
building mining model in the model because i can see just the wizard
of the model and how can i undrestand othe about time series formula
in the chart
thanks alot if answer me
View 1 Replies
View Related
Feb 26, 2003
Hello everybody,
I am trying to set up alert for deadlocks (error 1205)
I am able to create alert with net and e-mail notification (email and and
net notification tested and operator exist)
Trace enabled by
DBCC traceon (-1, 3605, 1204)
To create deadlock I use test script from
http://vyaskn.tripod.com/administration_faq.htm#q4
Deadlock created and writetn into log file ,but alert never fires and
counter always at 0
I am running SQL2000 Enterprise edition SP3.
I used same steps on 5 other server ,but effect is the same, deadlock
detected and written into log file, but notificaion never fires ?
why alert does not fire ,is it a bug ?
Thank
Alex
View 2 Replies
View Related
Mar 7, 2008
Hi,
We use SSIS to download data from a DB2 database using DB2 Connect and MS OLE DB as source and target drivers. It runs fine most of the time BUT there is one issue that we can not solve.
Sometime DB2 table is being used by some other processes, or in other words two different processes are trying to access same table and rows and the situation is what termed as CONTENTION. So one of those processes will fail and finally only one will succeed. We don't have a control over this DB2 source, and don't know what other processes might be running on it.
Our problem is SSIS fails and doesn't returns any error in the log file for this Contention situation. We only know it when our application reports that certain data is missing OR we check that DTS failed on some step (not neccesarily on same always), but then error log doesn't gives us any error message.
Could anyone please analyze and instruct if there are some ways in SSIS 2005 to catch such errors, or to avoid such situations. Feel free to write questions if you have any.
Regards
View 1 Replies
View Related
Mar 26, 2002
Dear all,
I have setup log shipping for one of my production server.The purpose of setting log shipping is having a standby server in case the primary fails.
Now i am getting the error saying:
The log shipping destination server is out of sync by 640 minutes. [SQLSTATE 42000] (Error 14421) Associated statement is not prepared [SQLSTATE HY007] (Error 0). The step failed.
I appreciate any ideas.
View 4 Replies
View Related
Aug 24, 2007
Hi All
Can someone tell me what to do with this Error:
SQL Server Management Studio could not save the configuration of 'B1' as a Secondary.
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The specified @server_name (A1) does not exist.
The specified @server_name (A1) does not exist.
The specified @server_name (A1) does not exist. (Microsoft SQL Server, Error: 14262)
I have two sql 2005 servers A1 and B1 but the databases are setup with sql 2000 compatibility.
A1 service accounts use local system account.
B1 service accounts use domain system account.
I can easily restore a database from a shared folder on A1.
I followed this article to setup log shipping.
http://deepakinsql.blogspot.com/2007/06/how-to-configure-log-shipping-in-sql.html
did anyone come across this problem?
View 5 Replies
View Related
Dec 8, 2005
Log Shipping is not replication in the immediate sense, but it is as close as I could find in this set of forums. If there is a better place for this question, please direct me to it.
View 6 Replies
View Related
Jan 24, 2006
Hi,
I am new to MS DTS and i am using MS SQL 2000 as my database. I am trying to do a Bulk insert using MS DTS package. The package is trying to load data from Text file to a SQL 2000 table. When runninh the package i am getting an error saying that 1 task failed during execution and the task is shown in red colour indicating that the task has failed. Now when i get the details of the error it shows the follows:
Could not bulk insert because the file D:DtsFile.txt could not be opened. Operation system error code: 21 (The device is not ready).
Please help me in solving this problem, if any one has got this error and resolved or have any idea of the error please help. :)
Regards,
Rajeev Prabhu
View 2 Replies
View Related
Jan 25, 2007
I'm attempting to configure log shipping on 2 servers with SQL Server 2000 sp4 Enterprise Edition. I keep getting the following error when the job attemtps to execute.
Error 14261: The specified primary_server_name.primary_database_name('C')
already exists.
I have tried this KB http://support.microsoft.com/kb/298743 and i got the same error again!
Please HELP!
View 3 Replies
View Related
Aug 10, 2006
Hi all,
Scenario : MS Windows 2003 SP1 - MS SQL Server 2000 EE SP4
Log Shipping
My secondary server was restoring backup logs successfully, but suddenly i got the following error:
[Microsoft SQL-DMO (ODBC SQLState: 42000)] Error 4323: [Microsoft][ODBC SQL Server Driver][SQL Server]The database is marked suspect. Transaction logs cannot be restored. Use RESTORE DATABASE to recover the database.
[Microsoft][ODBC SQL Server Driver][SQL Server]RESTORE LOG is terminating abnormally.
How can I fix this situation without re create the maintenance plan ??
View 1 Replies
View Related
Sep 22, 2014
How can I create encryption on database ?. When I try to apply encryption on my database then it showing error message below....
View 9 Replies
View Related
Nov 17, 2015
My laptop date format is mm/dd/yyyy.
In the report, I am using Format(field,"dd-MMM-yyyy"), but somehow the result comes out recognizing my month as day and my day as month. How do I fix this?
ie. my report date is 11/06/2015, the result shows 11-Jun-2015 instead of 06-Nov-2015.
View 2 Replies
View Related
Oct 12, 2007
Hi,
I drag the database Backup Task from the toolbox and double-click on it, it shows this error:
Cannot show the editor for this task.
Additional information
Method not found: 'Void Microsoft.SQLServer.Management.DatabaseMaintenance.TaskUIUtils..ctor()'.
(Microsoft.SQLServer.MaintenancePlanTasksUI)
What is the prob with this?
cherriesh
View 1 Replies
View Related
Aug 13, 2015
Can you use the below query to get CPU high utilisation alert purposes for both named and default instance? or, do I need to make any changes here (@wmi_namespace=N'.ROOTCIMV2' ) ?
USE [msdb]
GO
EXEC msdb.dbo.sp_add_alert @name=N'CPU_WM_Utilization_Check',
@message_id=0,
@severity=0,
[code]....
View 2 Replies
View Related
Mar 21, 2007
I have SQL Server 2005 log shipping setup with primary/secondary configuration. I can confirm from the logs that log shipping is working without issue, however, reports generated from the monitor server show this message:
Violation of PRIMARY KEY constraint 'PK__#log_shipping_mo__3ABBDC91'. Cannot insert duplicate key in object 'dbo.#log_shipping_monitor'. The statement has been terminated.
There is nothing special about the configuration. Any ideas?
View 9 Replies
View Related
Sep 12, 2011
Presently I have a main report and subreport, with the subreport having values for a carbon copy contact, which when it is displayed it shows these values:
Peter Piper #Error #Error peterpiper@mycompany.com #Error
Donald Duck #Error #Error donaldduck@mycompany.com #Error
etc.
When I run the subreport directly, it correctly returns all the values:
Peter Piper 123-345-6789 Calgary peterpiper@mycompany.com T
Donald Duck 987-654-3210 Calgary donaldduck@mycompany.com F
Here are the details on SQL Server 2008:
Microsoft SQL Server 2008 (SP2) - 10.0.4064.0 (X64) Feb 25 2011 13:56:11 Copyright (c) 1988-2008 Microsoft Corporation Standard Edition (64-bit) on Windows NT 6.0 <X64> (Build 6002: Service Pack 2)
why the #Error is showing up the the main report?
View 3 Replies
View Related
Apr 6, 2007
I am receiving errors from a job that no longer exists. The databases created for this no longer exist also.
DATE/TIME: 4/6/2007 3:32:00 PM
DESCRIPTION: The log shipping secondary database LOG1.log_ship_test has restore threshold of 45 minutes and is out of sync. No restore was performed for 6004 minutes. Restored latency is 0 minutes. Check agent log and logshipping monitor information.
COMMENT: (None)
JOB RUN: (None)
I have gone into agent jobs and deleted those associated with it. I have also gone into the msdb database and deleted any lines associated with it in the log_shipping tables. But the errors keep coming. What do I need to do to clean this up?
Thanks
View 2 Replies
View Related
Jan 4, 2008
Hey all!
I have log shipping set up between two servers (s1 and s2). Data is flowing from s1 to s2 and the log shipping monitor is on s1.
I get the following error sporadically
"Transaction Log Backup Job for DB Maintenance Plan 'LogShip DatabaseName" failed..
Error: 60000, Severity: 10, State: 1
So i usually go and start the job manually and it runs fine. But why does this happen and what does the error mean? The above job is scheduled to run every 5mins daily.
Thanks in advance!
THE LADDERS (The Most $100k+ Jobs.)
www.TheLadders.com
View 6 Replies
View Related
Apr 30, 2007
I am getting the following error " The specified servername does not exist" when I run the Log Shipping procedure. There is only a Primary server running Win Server 2003 withe Service pack 2 and SQL Server 2005 with service pack 2 and one secondary server runnung Win Server 2003 R2 with service pack 2 and SQL Server 2005 with service pack 2. All permission setting look ok . Can anyone help
View 4 Replies
View Related
May 13, 2007
Hi
I could not able to find Forums in regards to 'Log Shipping' thats why posting this question in here. Appriciate if someone can provide me answers depends on their experience.
Can we switch database recovery model when log shipping is turned on ?
We want to switch from Full Recovery to Bulk Logged Recovery to make sure Bulk Insert operations during the after hours load process will have some performance gain.
Is there any possibility of loosing data ?
Thanks
View 1 Replies
View Related
Jan 31, 2008
I would like to fail a package depending on the error. The package extracts data from Excel files. I would like to continue processing if an Excel file is badly formatted, but stop processing if there is a serious issue. like the file server hosting the Excel files crashed.
I was thinking about dynamically changing the MaxeErrorCount property based on the Error ID or description.
Any ideas on an intelligent/simple way to do this
View 1 Replies
View Related
May 5, 2015
We tried to configure log shipping using script generated by GUI and when executed specific script which is meant for secondary server the database is not created and threw below error.
Msg 15010, Level 16, State 1, Procedure sp_add_log_shipping_secondary_database, Line 50
The database 'BUBALLO' does not exist. Supply a valid database name. To see available databases, use sys.databases.
Note: Only Copy, restore and alerts jobs have been created.
The account I'm trying to configure log shipping is the service account by which SQL and agent services are running and folder in where data and log files are intended and to be created is open to all (everybody has read/write permissioins) believe the issue is not with permissions.
View 4 Replies
View Related
Apr 24, 2007
I set up Log Shipping with just 2 servers primary and secondary. When I run from the Wizard for the very first time keeps failing at the stage of saving Secondary Server Configuration info. When i instead run the generated script this problem disappears but then restoring of transactions fails - the process can backup transactions from the Primary server , copy them accross to the secondary and fails on the restore. Any ideas why.
View 6 Replies
View Related
Jun 8, 2006
Hi,
I 'm sure I am missing something obvious, hopefully someone could point it out. After a failover log shipping, I want to fail back to my inital Primary server database; however, my database is marked as loading. How can I mark it as normal?
I did the failover as follow:
I did a failover log shipping from the 2 server Sv1 (Primary) and Sv2 (Secondary) by doing the following
1) Stop the primary database by using sp_change_primary_role (Sv1)
2) Change the 2nd server to primary server by running sp_change_secondary_role (Sv2)
3) Change the monitor role by running sp-change_monitor_role (Sv2)
4) Resolve the log ins - (Sv2)
5) Now I want to fail back - I copy the TRN files to Sv1 - use SQL Ent to restore the database at point in time. The task is done; however, the database is still mark as loading. I could not use sp_dboption.
I appreciate any suggestion.
Thanks in advance
View 5 Replies
View Related
Jun 18, 2015
I received an alert from one of my two secondary servers (all servers are running 2012 SP1):
File 'E:SQLMS SQL ServerMSSQL11.MSSQLSERVERMSSQLDATAMyDatabaseName_DateTime.tuf' is not a valid undo file for database 'MyDatabaseName (database ID 8). Verify the file path, and specify the correct file.
The detail in the job step shows this additional information:
*** Error: Could not apply log backup file 'MyDatabaseName_DateTime.trn' to secondary database 'MyDatabaseName'.(Microsoft.SqlServer.Management.LogShipping) ***
*** Error: Table error: Page (0:0). Test (m_headerVersion == HEADER_7_0) failed. Values are 0 and 1.
Table error: Page (0:0). Test ((m_type >= DATA_PAGE && m_type <= UNDOFILE_HEADER_PAGE) || (m_type == UNKNOWN_PAGE && level == BASIC_HEADER)) failed. Values are 0 and 0.
Table error: Page (0:0). Test (m_freeData >= PageHeaderOverhead () && m_freeData <= (UINT)PAGESIZE - m_slotCnt * sizeof (Slot)) failed. Values are 0 and 8192.
Starting a few minutes later, the Agent Job named LSRestore_MyServerName_MyDatabaseName fails every time it runs. The generated log backup, copy, and restore jobs run every 15 minutes.
I fixed the immediate problem by running a copy-only full backup on the primary, deleting the database on the secondary and restoring the new backup on the secondary with NORECOVERY. The restore job now succeeds and all seems fine. The secondaries only exists for DR purposes - no one runs reports against them or uses them at all. I had a similar problem last weekend on a different database that is also replicated between the same servers. I've been here for over a year, and these are the first instances of this problem that I've seen. However, I've now seen it twice in a week on the same server.
View 0 Replies
View Related
Mar 7, 2007
Lokendra writes "I have configured the Database mail profile and account in Sql Server 2005 but the mail is not sending and showing the following error message:
Error,235,The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2007-03-05T15:16:07). Exception Message: Cannot send mails to mail server. (Mailbox name not allowed. The server response was: Sorry<c/> that domain isn't in my list of allowed rcpthosts.).
),3000,90,,3/5/2007 3:16:07 PM,sa
but while in the same mail set up in previous instance of sql server 2005 the message was sending very well. After installing new instance of sql server 2005 the problem is arising.
Anybody can tell me that what I can do so that i can send mail using the SMTP databasemail account."
View 1 Replies
View Related
Apr 6, 2004
I am pretty new to MS SQL Server ....
I have installed SQL Server Enterprise Manager Version 8.0. I am getting the following error while try to create a new DTS Package.
"DTS designer Error .... Access Denied"
getting the DTS packge design window but there is no TASK icon visible
either in the tool bar or menu.....
Enterprise Manager Version 8.0
OS : Windows XP pro with SP1
View 2 Replies
View Related
Jun 15, 2015
I am trying to connect to the database but it gives the error cannot connect to database.Login failed for user....
This is my connection string in code behind :
[string constring = "Data Source= localhost; Initial catalog= Database.mdf; Integrated Security= True";
SqlConnection con = new SqlConnection(constring);]
This is my connection string in web.config:
<connectionStrings>
<add name="Database" connectionString="Data Source= localhost;Initial catalog=Database.mdf;Integrated Security=True" providerName="System.Data.SqlClient"/>
</connectionStrings>
View 6 Replies
View Related
May 29, 2015
I ran the below INSERT COMMAND and it resulted into the following error message.You can also see the table structure below.Those are the only two tables that reference the Artist table.
SET IDENTITY_INSERT dbo.ARTIST ON
INSERT INTO ARTIST
(ArtistID,LastName,FirstName,Nationality,DateOfBirth,DateDeceased)
VALUES(1, 'Miro', 'Joan', 'Spanish', 1893, 1983);
[code]....
View 5 Replies
View Related
