DB Engine :: AlwaysOn To Improve The Lock And Block
Dec 2, 2015
We have a reporting job that will query the mainDB and do so come calculation and insert into reportingDB, there are a lot of blocking and performance issue when it query the mainDB so we have plan to read the secondary replica and do the processing there later to insert back into primaryDB (reportingDB).. for this we have implemented linked server but it gets timeout, I do not want to change the remote query timeout on server level so is there anyway to do this, Any one making use of secondary replica to do get the data by job?
View 4 Replies
ADVERTISEMENT
Jul 20, 2005
I am using SQL server 2000 with Uniface (4GL).I am running a process which commits every 30 seconds or so on onemachine and another user is trying to perform a small update at thesame time on the one of the tables whose data is modified by the firstprocess.I accept that the two second process may get blocked at times by thefirst but expect that to only happen rarely due to the likelihood ofboth processes trying to update the very same row in a large table.Other users are also on line at the same time performing updatesacross the database.What I have witnessed though was the second process being blocked bythe first (confirmed by looking in enterprise manager) and REMAININGBLOCKED EVEN AFTER A COMMIT in the first process!!My big problem is that I have only seen this happen once on a customersite and have not been able to reproduce it myself to provide anyfurther information.The application is set to use row level locking and is also in readuncommited mode.Any help or suggestions would be greatly appreciated.Bob.
View 3 Replies
View Related
May 7, 2015
In SQL Server 2014, how big for the block size is better for performance? 64 KB? 4 KB?
For normal database files, best practise is 64 KB disk block size. Not sure if it is same for memory-optimized filegroup.
View 12 Replies
View Related
Jun 26, 2015
I am using alwayson on my SQL 2012 databases. I am using ola hallengren scripts for backing up databases. Full & diff db backups work fine, but the log is not getting backed up. The tran log backup job doesn't error out too. Trying to figure out what I may be missing?
View 10 Replies
View Related
Jul 29, 2015
We have a database with AlwaysOn enabled, where the database is getting mirrored using AlwaysOn to a secondary node in a two node cluster. Now we want to set up a DR site for that database in a different data center.
So trying to analyse what technologies. We can use for setting up the DR for that database. Can we use mirroring / replication or what's the best way of setting up DR on that database.
View 3 Replies
View Related
Sep 16, 2015
To set up AlwaysOn Feature on cluster environment how many VM's we would require.
We have already have 2 VM's for cluster but am not able to configure AlwaysOn.Â
View 2 Replies
View Related
Sep 14, 2015
I am planning to have AlwaysON Availability Groups setup between Server 1 and Server 2
Server 1 -->Publisher-->2014 SQL Enterprise edition-->Windows Std 2012 --> Always on Primary Replica
Server 2 -->Publisher(when DR happens)-->2014 SQL Enterprise edition-->Windows Std 2012 --> Secondary  Primary
Server 4 as Subscriber
Server X Â as Remote Distributor ..
as of now , In the event of Disaster happens on Node 1  i will have to manage JOBS on Node 2  (backups, Maintenance, replication, day-day other Jobs)..Is there a way i can call all jobs to run from a remote server which executes on Active NODE(which ever is active)? so that in the event of disaster happens on node1, when  node 2 becomes online and  i don't have to do anything with SQL Agent or jobs on Node 2?
View 4 Replies
View Related
Oct 15, 2015
Two servers are configured with Windows 2008 / SQL server 2012 utililizing Always-On for HA. We need to upgrade both servers to Windows 2012 / SQL Server 2014 with minimum downtime(Time for Always-On failover). The upgrade to SQL 2014 is straight forward with for minimum downtime.The Windows upgrade(2008 -> 2012) is the problem. From what I have observed and read in blogs.The Windows node to be upgraded must be removed from the Windows cluster before the node can be upgraded to Win 2012.A Win 2008 and Win 2012 node can not reside in the same cluster. If this is true then the only option I can think of is to dump the DB on WIN 2008 server and restore on Win 2012. This is an outage(time it takes to dump and restore).Is there any other method to upgrade these two nodes utilizing Always-On of some other method without downtime?
View 2 Replies
View Related
Oct 21, 2015
We're running a SQL-Server 2012 and for a while now my accessing records from bigger tables became tricky.There is a Tomcat-8 running which sometimes can't access these tables at all or only after a long delay. As this happened first I went to the Server-Room and opened the Database with the Management Studio to see if there were any issues. open the Database but expanding the directories for "Tables" or "Views" failed after 10 Seconds with the Error 1222.
I turned the Tomcat-8 off to find out whether some unclosed connections are open. Same result, no changes even after one hour.Another 3rd-Party program which we are using seems to connect via other mechanisms to the SQL-Server (Is there a way to list current connections and their types in the Management-Studio, I'm under the impression this program does a lot of caching, it's much faster than the Management-Studio itself.The question is now how can I find out why these time-outs happen? I'm not an expert in SQL-Servers so.
View 8 Replies
View Related
Dec 3, 2014
I have the following stored procedure to test scope of variables
alter proc updatePrereq
@pcntr int,
@pmax int
as
begin
[Code] ....
In the above script @i is declare in the if block only when the @pcntr value is 1. Assume the above stored procedure is called 5 times from this script
declare @z int
set @z = 1
declare @max int
set @max = 5
while @z <= @max
begin
exec dbo.updatePrereq @z, @max
set @z = @z + 1
end
go
As i said earlier `@i` variable exists only when `@pcntr` is `1`. Therefore when i call the stored procedure for the second time and so forth the control cannot enter the if block therefore @i variable wouldn't even exist. But the script prints the value in `@i` in each iteration, How comes this is possible should it throw an error saying `@i` variable does not exist when `@pcntr` values is greater than `1`?
View 1 Replies
View Related
Feb 2, 2007
I simply made my script task (or any other task) fail
In my package error handler i have a Exec SQL task - for Stored Proc
SP statement is set in following expression (works fine in design time):
"EXEC [dbo].[us_sp_Insert_STG_FEED_EVENT_LOG] @FEED_ID= " + (DT_WSTR,10) @[User::FEED_ID] + ", @FEED_EVENT_LOG_TYPE_ID = 3, @STARTED_ON = '"+(DT_WSTR,30)@[System::StartTime] +"', @ENDED_ON = NULL, @message = 'Package failed. ErrorCode: "+(DT_WSTR,10)@[System::ErrorCode]+" ErrorMsg: "+@[System::ErrorDescription]+"', @FILES_PROCESSED = '" + @[User::t_ProcessedFiles] + "', @PKG_EXECUTION_ID = '" + @[System::ExecutionInstanceGUID] + "'"
From progress:
Error: The Script returned a failure result.
Task SCR REIL Data failed
OnError - Task SQL Insert Error Msg
Error: A deadlock was detected while trying to lock variable "System::ErrorCode, System::ErrorDescription, System::ExecutionInstanceGUID, System::StartTime, User::FEED_ID, User::t_ProcessedFiles" for read access. A lock could not be acquired after 16 attempts and timed out.
Error: The expression ""EXEC [dbo].[us_sp_Insert_STG_FEED_EVENT_LOG] @FEED_ID= " + (DT_WSTR,10) @[User::FEED_ID] + ", @FEED_EVENT_LOG_TYPE_ID = 3, @STARTED_ON = '"+(DT_WSTR,30)@[System::StartTime] +"', @ENDED_ON = NULL, @message = 'Package failed. ErrorCode: "+(DT_WSTR,10)@[System::ErrorCode]+" ErrorMsg: "+@[System::ErrorDescription]+"', @FILES_PROCESSED = '" + @[User::t_ProcessedFiles] + "', @PKG_EXECUTION_ID = '" + @[System::ExecutionInstanceGUID] + "'"" on property "SqlStatementSource" cannot be evaluated. Modify the expression to be valid.
Warning: The Execution method succeeded, but the number of errors raised (4) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
And how did I get 4 errors? - I only set my script task result to failure
View 11 Replies
View Related
Apr 7, 2004
Hi
We are facing an acute situation in our web-application. Technology is ASP.NEt/VB.NET, SQL Server 2000.
Consider a scenario in which User 1 is clicking on a button which calls a SQL stored procedure. This procedure selects Group A of records of Database Page1.
At the same time if User 2 also clicks the same button which calls same SQL stored procedure. This procedure selects Group B of records of Database Page1.
So, its the same Page1 but different sets of records. At this moment, both the calls have shared locked on the Page1 inside the procedure.
Now, in call 1, inside the procedure after selecting Group A of records, the next statement is and update to those records. As soon as update statement executes, SQL Server throws a deadlock exception as follows :
Transaction (Process ID 78) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction
We are able to understand why its happening. Its because, Group A and Group B of records are on the same Page1. But both the users have shared lock on the Page1. So, no one gets the exclusive lock in records for update, even though, the records are different.
How can I resolve this issue? How can I get lock on wanted rows instead of entire page?
Please advice. Thanks a bunch.
Pankaj
View 1 Replies
View Related
May 22, 2006
Hi,
I have set of 2 DTS packages, one of which calls the other by forming a command-line (dtexec) using a Execute Process task.
From the parent package-> Execute Process Task->
dtsexec /F etc... /<pkg variable> = "servername"
Each of the parent and the called package have a variable: "User::DWServerSQLInstance" which is mapped to the SQL server connection manager server name property using an expression. The outer package has the above variable and so does the inner called package (which gets assigned through the command line from the outerpackage call to inner)
I "sometimes" get the following error:
OnError,I4,TESTDOMAdministrator,ACDWAggregation,{A1F8E43F-15F1-4685-8C18-6866AB31E62B},{77B2F3C7-6756-46EB-8C01-D880598FB4B3},5/22/2006 5:10:28 PM,5/22/2006 5:10:28 PM,-1073659822,0x,The variable "User::DWServerSQLInstance" is already on the read list. A variable may only be added once to either the read lock list or the write lock list.
Help would be appreciated!
I have seen other posts on this but, not able to relate the solution to my scenario.
View 9 Replies
View Related
May 10, 2006
Hi All,
I have seen a few other people have this error.
Package works fine when run from BIDS, DTExec, dtexecui. When I schedule it, It get these random errors. (See below)
The main culprit is a variable called "RecordsetFileDIR" which is set using an expression. (@[User::_ROOT] + "RecordSets\")
A number of other variables use this as part of their expression and as they all fail, pretty much everything dies.
I have installed SP1 (Not Beta) on server. Package uses config files to set the value of _ROOT.
The error does not always seem to be with this particular variable though. Always a variable that uses an expression but errors are random. Also, It will run 3 out of 10 times without a problem. I am the only person on the server at the time.
Any ideas?
Cheers,
Crispin
Error log:
OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073659822,0x,The variable "User::RecordsetFileDIR" is already on the read list. A variable may only be added once to either the read lock list or the write lock list.
OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073639420,0x,The expression for variable "rsHeaderFile" failed evaluation. There was an error in the expression.
OnError,,,DF_Header_Header,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636247,0x,Accessing variable "User::rsHeaderFile" failed with error code 0xC00470EA.
OnError,,,Move All Data,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636247,0x,Accessing variable "User::rsHeaderFile" failed with error code 0xC00470EA.
OnError,,,Load Open Batches and Process Files,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636247,0x,Accessing variable "User::rsHeaderFile" failed with error code 0xC00470EA.
OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636247,0x,Accessing variable "User::rsHeaderFile" failed with error code 0xC00470EA.
OnError,,,DF_Header_Header,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636390,0x,The file name is not properly specified. Supply the path and name to the raw file either directly in the FileName property or by specifying a variable in the FileNameVariable property.
OnError,,,Move All Data,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636390,0x,The file name is not properly specified. Supply the path and name to the raw file either directly in the FileName property or by specifying a variable in the FileNameVariable property.
OnError,,,Load Open Batches and Process Files,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636390,0x,The file name is not properly specified. Supply the path and name to the raw file either directly in the FileName property or by specifying a variable in the FileNameVariable property.
OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636390,0x,The file name is not properly specified. Supply the path and name to the raw file either directly in the FileName property or by specifying a variable in the FileNameVariable property.
OnError,,,DF_Header_Header,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073450901,0x,"component "rsHeader" (365)" failed validation and returned validation status "VS_ISBROKEN".
OnError,,,Move All Data,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073450901,0x,"component "rsHeader" (365)" failed validation and returned validation status "VS_ISBROKEN".
OnError,,,Load Open Batches and Process Files,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073450901,0x,"component "rsHeader" (365)" failed validation and returned validation status "VS_ISBROKEN".
OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073450901,0x,"component "rsHeader" (365)" failed validation and returned validation status "VS_ISBROKEN".
View 1 Replies
View Related
May 23, 2001
Hi,
I want to lock a table so others cannot lock it but able to read it inside transactions.
The coding I need is something like this: set implicit_transactions on begin transaction select * from table1 with (tablock, holdlock) update table2 set field1 = 'test' commit transaction commit transaction
I have tried the coding above, it won't prevent others from locking table1.
So, I changed the tablock to tablockx to prevent others from locking table1. But this will also prevent others from reading table1. So, how can I lock table1 so others cannot lock it but still able to read it?
Thank you for any help
View 1 Replies
View Related
Mar 9, 2008
I have the following SQL, which works but I think it can be done simplier. I seem to have to group it by multiple columns, but I am sure there must be a way of grouping the results by a single column. Any Ideas?
Code:
SELECT count(order_items.order_id) as treenum, orders.order_id, orders.order_date,
orders.cust_order, orders.del_date, orders.confirmed, orders.del_addr
FROM orders, order_items
WHERE orders.order_id = order_items.order_id GROUP by orders.order_id, orders.order_date
, orders.cust_order, orders.del_date, orders.confirmed, orders.del_addr
ORDER BY orders.order_id DESC
View 2 Replies
View Related
Jul 12, 2006
Hello,
I have four different transactions such as below and I do one insert and one update in each transaction and it seem it is slow and creates deadlock with the user interface.
These transactions are performed against the tables that users are accessing with another user interface. I have following two questions:
1. T2.TextField1 and TextField2 = @TextField2 are Ok, Nok fields so I did not put index since only two distinct values. Should I put indexes on these fields?
2. Can I make this transaction let user interface do its task in case accessing the same rows, I can start transaction again but I do not want users get disturbed?
.
BEGIN TRANSACTION pTrans
BEGIN
INSERT INTO T1
(fields)
SELECT (fields)
FROM T2 INNER JOIN View1 ON T2.TrID = View1.MyTableID
WHERE (T2.TextField1 = @TrType AND T2.TextField2 = @TextField2)
UPDATE T2
SET TextField2 = 'Ok', TextField2Date=@MyRunDateTime
FROM T2
WHERE (TextField1 = @TrType AND TextField2 = @TextField2)
IF @@ERROR <> 0
BEGIN
rollback transaction pTrans
return(-1)
END
ELSE
BEGIN
commit transaction pTrans
END
END
View 3 Replies
View Related
Nov 29, 2006
I have a pretty good db server with four CPUs, it has not any other loads on it, but the following query takes 4ms to return. I use the syscolumns this way quite often, I am not sure why it takes it that long to return, any idea?
select 'master',id,colid,name,xtype,length,xprec,xscale,status from [ablestatic].[dbo].syscolumns where id=(select id from [ablestatic].[dbo].sysobjects where name='link_data_ezregs')
View 6 Replies
View Related
Jul 11, 2006
hi, have a nice day to all , can some expert here point out what are the do and don't when we writing query ? ie:should we create many view as handler to get data? when should we use store procedure and trigger ? and so on
i seeking the way to improve my sql skill, can someone suggest some reference site or material or book as well ?
thank you very much for helping
View 2 Replies
View Related
Nov 30, 2005
I wrote the following function a few years ago - before I learned about SQL's PATINDEX function. It might be possible to check for a valid email address syntax with a single PATINDEX string which could replace the entire body of hte function below.
Is anyone is interested in taking a crack at it?
Signed... lazy Sam
CREATE FUNCTION dbo.EmailIsValid (@Email varchar (100))
/*
RETURN 1 if @Email contains a valid email address syntax, ELSE RETURN 0
*/
RETURNS BIT
AS
BEGIN
DECLARE @atpos int, @dotpos int
SET @Email = LTRIM(RTRIM(IsNull(@Email, ''))) -- remove leading and trailing blanks
IF LEN(@Email) = 0 RETURN(0) -- nothing to validate
SET @atpos = charindex('@',@Email) -- position of first (hopefully only) @
IF @atpos <= 1 OR @atpos = LEN(@Email) RETURN(0) -- @ is neither 1st or last or missing
IF CHARINDEX('@', @email, @atpos+1) > 0 RETURN(0) -- Two @s are illegal
IF CHARINDEX(' ',@Email) > 0 RETURN(0) -- Embedded blanks are illegal
SET @dotpos = CHARINDEX('.',REVERSE(@Email)) -- location (from rear) of last dot
IF (@dotpos < 3) or (@dotpos > 4) or (LEN(@Email) - @dotpos) < @atpos RETURN (0) -- dot / 2 or 3 char, after @
RETURN(1) -- Whew !!
END
Go
View 8 Replies
View Related
Aug 21, 2007
Hi,
I have this SQL query that can take too long time, up to 1 minute if table contains over 1 million rows. And if the system is very active while executing this query it can cause more delays I guess.
select
distinct 'CONV 1' as Conveyour,
info as Error,
(select top 1 substring(timecreated, 0, 7) from log b where a.info = b.info order by timecreated asc) as Date,
(select count(*) from log b where b.info = a.info) as 'Times occured'
from log a where loggroup = 'CSCNV' and logtype = 4
The table name is LOG, and I retrieve 4 columns: Conveyour, Error, Date and Times occured. The point of the subqueries is to count all distinct post and to retrieve the date of the first time the pst was logged. Also, a first and last date could be specified but is left out here.
Does anyone knows how I can improve this SQL query?
Best /M
View 6 Replies
View Related
Jul 12, 2006
Hello,
I have four different transactions such as below and I do one insert and one update in each transaction and it seem it is slow and creates deadlock with the user interface.
These transactions are performed against the tables that users are accessing with another user interface. I have following two questions:
1. T2.TextField1 and TextField2 = @TextField2 are Ok, Nok fields so I did not put index since only two distinct values. Should I put indexes on these fields?
2. Can I make this transaction let user interface do its task in case accessing the same rows, I can start transaction again but I do not want users get disturbed?
.
BEGIN TRANSACTION pTrans
BEGIN
INSERT INTO T1
(fields)
SELECT (fields)
FROM T2 INNER JOIN View1 ON T2.TrID = View1.MyTableID
WHERE (T2.TextField1 = @TrType AND T2.TextField2 = @TextField2)
UPDATE T2
SET TextField2 = 'Ok', TextField2Date=@MyRunDateTime
FROM T2
WHERE (TextField1 = @TrType AND TextField2 = @TextField2)
IF @@ERROR <> 0
BEGIN
rollback transaction pTrans
return(-1)
END
ELSE
BEGIN
commit transaction pTrans
END
END
View 3 Replies
View Related
Dec 18, 2007
hi
in asp.net,i used sql server to store records.
in a table has 1 million records,but when i update the record,it is very slowly.
is "create index" helpful for "update" operation?
i need help,thanks a lot.
View 4 Replies
View Related
Mar 8, 2004
Hi,
We have a poorly performing SQL 2000 db. i have just defragged ( the HD, not indexes, these are done daily via SQL Agent) the data files of our server and have not found any improvement in response.
I have now got into using SQL profiler to analyse the server performance. in the results that the trace is returning there are some huge (REALLY BIG) values for the duration and cpu values but these rows have no textdata value returned (ie it is null)
why is this? for these rows, the reads and writes columns are also high.
if these rows are what is taking the cpu's time then how can i identify what the server is doing to make any changes?
any thoughts on what other values i might trace or what action i can take to find the slow down cause?
in performance manager the processors (dual Xeons) are rarely dropping below 60%.
thanks in advance
fatherjack
View 2 Replies
View Related
Jul 7, 2006
Aside from indexes, will it help if I use multiple filegroups to improve the time needed to query millions of records?
View 2 Replies
View Related
Aug 31, 2006
is there anyway to improve this statement. make it short? any input will be appreciated.
update TempAddressParsingTable set ad_unit = case
when right(rtrim(ad_str1),3) like 'apt' or
right(rtrim(ad_str1),3) like 'lot'
and substring(reverse(ad_str1), 4,1) in ('', ',', '.')
then right(ad_str1,3)
when right(rtrim(ad_str1),4) like 'unit' or
right(rtrim(ad_str1),4) like 'apt%' or
right(rtrim(ad_str1),4) like 'lot%'
and substring(reverse(ad_str1), 5,1) in ('', ',', '.')
then right(ad_str1,4)
when right(rtrim(ad_str1),5) like 'unit%' or
right(rtrim(ad_str1),5) like 'apt%%' or
right(rtrim(ad_str1),5) like 'lot%%'
and substring(reverse(ad_str1), 6,1) in ('', ',', '.')
then right(ad_str1,5)
when right(rtrim(ad_str1),6) like 'unit%%' or
right(rtrim(ad_str1),6) like 'apt%%%' or
right(rtrim(ad_str1),6) like 'lot%%%'
and substring(reverse(ad_str1), 7,1) in ('', ',', '.')
then right(ad_str1,6)
when right(rtrim(ad_str1),7) like 'unit%%%' or
right(rtrim(ad_str1),7) like 'apt%%%%' or
right(rtrim(ad_str1),7) like 'lot%%%%'
and substring(reverse(ad_str1), 8,1) in ('', ',', '.')
then right(ad_str1,7)
when right(rtrim(ad_str1),8) like 'unit%%%%' or
right(rtrim(ad_str1),8) like 'apt%%%%%'
and substring(reverse(ad_str1), 9,1) in ('', ',', '.')
then right(ad_str1,8)
when right(rtrim(ad_str1),9) like 'unit%%%%%' or
right(rtrim(ad_str1),9) like 'apt%%%%%%'
and substring(reverse(ad_str1), 10,1) in ('', ',', '.')
then right(ad_str1,9)
when right(rtrim(ad_str1), 2) like '#%'
and substring(reverse(ad_str1), 3, 1) in ('', ',', '.')
then right(ad_str1, 2)
when right(rtrim(ad_str1), 3) like '#%%'
and substring(reverse(ad_str1), 4, 1) in ('', ',', '.')
then right(ad_str1, 3)
when right(rtrim(ad_str1), 4) like '#%%%'
and substring(reverse(ad_str1), 5, 1) in ('', ',', '.')
then right(ad_str1, 4)
when right(rtrim(ad_str1), 5) like '#%%%%'
and substring(reverse(ad_str1), 6, 1) in ('', ',', '.')
then right(ad_str1, 5)
else null
end
View 13 Replies
View Related
Mar 13, 2007
Dear Experts,
I'm a DBA, Working for a Product based company.
We are implementing our product for a certain client of huge OLTP.
our reports team is facing problem (error: all the reports are timed out).though the queries are written properly, Each query is taking some minutes of time.
I've given the command DBCC DROPCLEANBUFFERS.
the time immediately dropped to 10 sec.
now my question is :
please suggest me the DBCC commands or any DBA related commands to improve the performance of the application for my reports team.
Thanks in advance.
Vinod
View 4 Replies
View Related
Jan 15, 2008
Hi All,
from your experience in SQL 2005 - do i have any free software that can help in improve performance or can help in identifying performance bottleneck. two examples of performance and help that i use usually use are the maintenance plan that do (check DB > reorganized index > rebuild index > update statics) and the second software is the SQL 2005 DASHBOARD for the reporting help.
do you have any other free tools and help that you can give me for performance or any thing that i must have in my SQL 2005 servers.
Thx
View 3 Replies
View Related
Jul 20, 2005
I have a table called work_order which has over 1 million records and acontractor table which has over 3000 records.When i run this query ,it takes long time since its grouping bycontractor and doing multiple sub SELECTs.is there any way to improve performance of this query ??-------------------------------------------------SELECT ckey,cnam,t1.contractor_id,count(*) as tcnt,(SELECT count(*) FROM work_order t2 WHEREt1.contractor_id=t2.contractor_id and rrstm=1 and rcdt is NULL) as r1,(SELECT count(*) FROM work_order t3 WHEREt1.contractor_id=t3.contractor_id and rrstm=2 and rcdt is NULL) as r2,(SELECT count(*) FROM work_order t4 WHEREt1.contractor_id=t4.contractor_id and rrstm=3 and rcdt is NULL) as r3,SELECT count(*) FROM work_order t5 WHEREt1.contractor_id=t5.contractor_id and rrstm=4 and rcdt is NULL) as r4,(SELECT count(*) FROM work_order t6 WHEREt1.contractor_id=t6.contractor_id and rrstm=5 and rcdt is NULL) as r5,(SELECT count(*) FROM work_order t7 WHEREt1.contractor_id=t7.contractor_id and rrstm=6 and rcdt is NULL) as r6,SELECT count(*) FROM work_order t8 WHEREt1.contractor_id=t8.contractor_id and rcdt is NULL) as open_count,(SELECT count(*) FROM work_order t9 WHEREt1.contractor_id=t9.contractor_id and vendor_rec is not NULL) asAck_count,(SELECT count(*) FROM work_order t10 WHEREt1.contractor_id=t10.contractor_id and (rtyp is NULL or rtyp<>'R') andrcdt is NULL) as open_norwoFROM work_order t1,contractor WHEREt1.contractor_id=contractor.contractor_id andcontractor.tms_user_id is not NULL GROUP BYckey,cnam,t1.contractor_id ORDER BY cnam*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 2 Replies
View Related
Jul 20, 2005
Hey guys,Here's my situation:I have a table called lets say 'Tree', as illustred bellow:Tree====TreeId (integer)(identity) not nullL1(integer)L2(integer)L3(integer)....L10(integer)The combination of the values of L1 thru L10 is called a "Path" , andL1 thru L10 values are stored in a second table lets say called'Leaf':Leaf====LeafId (integer)(identity) not nullLeatText varchar(2000)Here's my problem:I need to lookup for a given keyword in each path of the tree table,and return each individual column for the paths that match thecriteria. Here's the main idea of how I have this now.SELECT TreeId,L1,L2,...,L10, GetText(L1) + GetText(L2) as L2text + ...+ GetText(L10) AS PathTextINTO #tmp FROM Tree //GetText is a lookup function for the Leaf tableSELECT L1,GetText(L1),L2,GetText(L2),...,L10,GetText(L10) FROM #tmpWHERECharIndex(@keyword,a.pathtext) > 0Does anyone would know a better,smart, more efficient way toaccomplish this task? :)Thks,
View 1 Replies
View Related
Nov 23, 2007
Hello,
I would like to know how can I change a "not in" clause with the same results in a SQL sentence in order to improve the performance of my SQL sentence.
I am working with SQL Server 2005
Thanks,
jmota
View 6 Replies
View Related
Dec 14, 2007
SQL Experts,
I'm facing a performance issue with the following query...
The Output of the following Query is 184 Records and it takes 2 to 3 secs to execute the query.
SELECT DISTINCT Column1 FROM Table1 (NOLOCK) WHERE Column1 NOT IN
(SELECT T1.Column1 FROM Table1 T1(NOLOCK) JOIN Table2 T2 (NOLOCK)
ON T2.Column2 = T1.Column2 WHERE T2.Column3= <Value>)
Data Info.
No of records in Table1 --> 1377366
No. of distinct records of Column1 in Table1 --> 33240
Is there any way the above query can be rewritten to improve the performance, which should take less than 1 sec...
(I'm using DISTINCT because there are Duplicate records of Column1 inTable1 )
Any of your help in this regard will be greately appreciated.
--
ash
View 7 Replies
View Related
Nov 5, 2007
I am not an expert in either SSIS or VFP technology but know enough to get my way round. One anomaly I did discover I thought was worth sharing for all those concerned with getting large amounts of data out of VFP in as short a time as possible. When you search for performance tips in relation to SSIS the advice is to never use select table or view from data access mode list in ole db source as this effectively translates to select * from table and I've never come across anything to contradict this €“ well I am and let me explain why:
When you use SQL command as data access mode in ole db source (where ole db source is foxpro dbc) and you write out select column1, column 2 etc etc from table a etc etc and then connect that to a destination (in my case ole db destination) the SSIS task spends ages stuck on Pre-execute before anything happens (the bigger the fox tbl the longer the wait). What is happening behind scenes is that the foxpro engine (assuming its foxpro engine and not sql engine €“ either way don€™t think it matters too much) is executing the sql command and then writing results to a tmp (temp) file on your local temp folder €“ (in my case : C:Documents and SettingsautologinLocal SettingsTemp1). These files take up gigs of space and it is only when this process is complete does the SSIS task actually finish the Pre-execute and start the data transfer process. I couldn€™t understand a) why my packages were stuck on pre-execute for such long times? and b) why were the tmp files being created and why they were soo big?
If you change from SQL command in source to Table or view and then select your table from list the SSIS task when executed kicks off immediately and doesn€™t get stuck on pre-execute nor create any tmp files €“ so you save time and disk space. The difference in time is immense and if like me you were really frustrated with poor performance when extracting from VFP now you know why.
Btw maybe this does not apply to all versions of VFP but it certainly does to v7.
View 6 Replies
View Related
