DB Engine :: Applying Cumulative Updates To Server 2012 SP2

Sep 29, 2015

I have a SQL Server at version Microsoft SQL Server 2012 - 11.0.5343.0 (X64)

 May  4 2015 19:11:32
 Copyright (c) Microsoft Corporation
 Enterprise Edition (64-bit) on Windows NT 6.3 <X64> (Build 9600: ) (Hypervisor). 

I need to apply a cumulative update, either CU2 or CU3 for a third party tool used for monitoring to work. When I try to apply CU2 or any subsequent CU there is nothing that need the update so I cannot advance the version to 11.00.5548. 

View 3 Replies


ADVERTISEMENT

Applying The Updates To SQL Mobile Server?!

Apr 14, 2006

Dear MSDN Support,

Here i am back with an inquiry about the last process of Merge Replication between SQL Mobile 2005 and SQL Server 2005.

Well i have performed all the steps found in the tutorial of the SQL Mobile Edition Books Online, and everything went on so fine and smooth. Now when i deploy my application on the Pocket PC emulator all possible SQL queries work and modify the data only in the emulator, i had installed ActiveSync 4.0 and it synchronizes the SQL Mobile data with the SQL Mobile server only when i copy the database from the emulator to my desktop, and this way is not efficient to my project, i need a better way to synchronize the data between the database on the emulator and that on the SQL Mobile Server.

I'll be looking forward to getting your help as soon as possible.

Thank you for your attention.

Best Regards;

View 6 Replies View Related

Setup And Upgrade :: 2008 R2 / Applying Latest Service Pack And Cumulative Update?

Jun 1, 2015

I have a question about Service Packs and Cumulative Updates for SQL 2008 R2.

Do you need to apply them in the order that they are released? Or can you just apply the latest Service Pack and Cumulative Update?

View 3 Replies View Related

SQL Server 2012 :: Cumulative Average Without Cursor

Jul 29, 2015

I am trying to calculate cumulative GPA which is currently it is being done via a cursor and i was looking to change it to set based if possible.

The cumulative GPA is basically the average marks of all courses in a term and all previous terms. Where I am having an issue is if the course was taken in a previous term and the mark was lower, then the lower mark in not factored in to the GPA. If a course was taken in a previous term and the mark was higher then the marks for the current term are not factored into the GPA.

In the example below, math is taken in all three terms and the current term's mark is included in the GPA but not the previous terms because current terms mark is higher. Two classes (bio,chem) are taken in third term but not included due to marks being higher in second term.

CREATE TABLE [gpa]([term] int,
[course] varchar(10),
[mark] float);
INSERT INTO [gpa]
VALUES (1,'math',3),
(1,'eng',4),

[Code] .....

View 9 Replies View Related

SQL Server 2012 :: Full Updates To Transaction Table

Jun 27, 2014

I am basically trying to update a table which reflects account transactions. Accounts get paid in full but occasionally balance payments can be reversed and I want to update the table to show this - I need to show which period the account was previously paid in full.I've created a simplified version of the scenario and below are a couple of examples of things I've tried that do not work. I understand why they do not work but I'm struggling to figure out how to update the 'PeriodPrevPaidInFull' field.

create table Trans
(
AccNo int,
Transaction_Period_Index int,
PeriodOpeningBalance money,
DebtBalance money,
PeriodPaidInFull int NULL,
PeriodPrevPaidInFull int NULL,

[code]...

View 9 Replies View Related

SQL Server 2012 :: Trigger For Updates On A Row Using Previous Record Value?

Mar 9, 2015

I am looking to update a record from a previous row. So if there is a value of total goods in week 1, i want that value to carry forward to the value of goods in week 2. Is there any SQL as an example of the best way to accomplish this? I can query it using lag() which works great but i need the source data itself to update as the end-users are accessing the data via lightswitch, so when they save a change, i want the trigger (or whatever you recommend) to update the source table.

View 9 Replies View Related

SQL Server 2012 :: Remove Some Database Updates From Transaction Scope?

Mar 4, 2015

I have a stored procedure that does the following

BEGIN TRANSACTION OUTERTXN

BEGIN TRANSACTION
Copy records from live to archive
END TRANSACTION with commit or rollback
execute sproc to write audit log with success or fail
IF transaction was committed
BEGIN TRANSACTION
Delete records from live the archive
END TRANSACTION with commit or rollback
execute sproc to write audit log with success or fail
End IF

END TRANSACTION OUTERTXN with commit if both inner transactions were successful or rollback if either failed

If either inner transaction rolled back execute sproc to write audit log saying whole process is rolling back End IfMy problem is that if the outer transaction rolls back then I am losing the two audit records because they are part of the transaction scope. I want these executes to commit even if the master transaction fails.

View 2 Replies View Related

SQL 2012 :: Last Cumulative Update Applied To SSMS

Mar 4, 2014

What's the most straight forward to determine what the last cumulative update was that was applied to SSMS?

I know that CU8 is out for SQL Server 2012, I just need to confirm which (if any) update was last applied to SSMS I'm currently looking at.

View 4 Replies View Related

SQL 2012 :: Applying A Snapshot In Replication?

Jul 14, 2015

I generated a snapshot and it completed Successfully.

How do I apply the snapshot so that the data is refreshed?

[URL]

View 3 Replies View Related

SQL 2012 :: Applying Encryption On Database - Showing Error

Sep 22, 2014

How can I create encryption on database ?. When I try to apply encryption on my database then it showing error message below....

View 9 Replies View Related

DB Engine :: Cannot Restore BAK File On Server 2012

Aug 6, 2015

i have  .bak file  downloaded from internet , and i also have istalled  sql server  2012.my problem that i can not restore  this  .bak file and get this error massage :

System.Data.SqlClient.SqlError: The operating system returned the error '5(Access is denied.)' while attempting 'RestoreContainer::ValidateTargetForCreation' on 'C:Program FilesMicrosoft SQL ServerMSSQL10_50.MSSQLSERVERMSSQLDATASRO_VT_SHARD.mdf'. (Microsoft.SqlServer.SmoExtended)
- .bak file  version  = 661  10  50  1600 = sql server  2008R
- my sql version     = Microsoft SQL Server 2012 - 11.0.2100.60 (Intel X86)

View 4 Replies View Related

DB Engine :: Server 2012 Instance Is Set To Hidden

Aug 6, 2015

Is there any query/script to find out if SQL Server 2012 instance is set to hidden or not instead of going to SQL Server configuring manager?

View 2 Replies View Related

DB Engine :: MAX And MIN Server Memory Settings For 2012?

Sep 8, 2015

We have a new set up on VM to run an application running 24*7 (migrated from SQL server 2008R2) with below configs:

1. OS- Windows server 2012 Standard 64 bit hosted on Virtual Machine

2. Memory 16 GB and Cores =4 with 2.4GhZ processor

3. SQL server 2012 SP2 , 64 bit Standard edition.

4. Total size of databases as of now 15 GB with biggest being 5 GB.

How should i go around in setting the MAX and MIN server memory settings. I have this set up for many of SQL 2005 and 2008R2 servers, but for 2012 i heard that things has slightly changed. 

How should i start analyzing and setting the right value of this MAX and MIN?

View 5 Replies View Related

DB Engine :: Server 2012 Failover Cluster New Instance

Aug 6, 2015

I am new to SQL Server 2012 clustering.I added a new instance to one of the two nodes.when I try to move it to the other node it fails.Do I need to install it on both?If so, what options do you install on the second node?

View 7 Replies View Related

DB Engine :: Server 2012 8060 Row Length Limit

Oct 21, 2015

SQL Server 2012.If I create a table with 307 columns, all of type nvarchar(50), it works. If I add another column of type nvarchar(50), it works but I get a warning:

Warning: The table "RowSizeError" has been created, but its maximum row size exceeds the allowed maximum of 8060 bytes. INSERT or UPDATE to this table will fail if the resulting row exceeds the size limit.

 307 x 50 = 15350 and 308 x 50 = 15400. why I get the warning below with 308 columns but not with 307?

drop table [RowSizeError]
go
CREATE TABLE [RowSizeError](
 [F1] [nvarchar](50) NULL,
 [F2] [nvarchar](50) NULL,
 [F3] [nvarchar](50) NULL,
 
[code]....

View 4 Replies View Related

SQL 2012 :: Transactional Replication - Fire A Job / Sproc After Applying Records To Subscriber

Feb 28, 2014

I have a transactional replication environment that creates subscribers on another server as a staging area for an ETL process to a data warehouse application on a 3rd server which is the report repository. Currently the ETL process runs every 10 minutes and performs it's function across approx 150+ subscriber databases and consolidates it to the data warehouse.

I have an SLA of 2 minutes. I'd like to rework the ETL process (which run as SSIS job at the moment) to be specific to a single database and fire that one ETL proces when changes have been applied to that subscriber database only. Of these 150+ databases generally only about 8-10 are updating the subscriber at any given time per Repl Monitor. I'm thinking that if I only have a few transactions to apply to a single db the ETL would run in seconds dynamically as the subscriber is update.

The issue is how to fire the ETL process upon completion of updates to the subscriber DB? I'm thinking of using SP_Start_job passing the DBID to update the warehouse but unsure whether this is possible but if so where to trigger it.

View 1 Replies View Related

DB Engine :: Server 2012 Import Data From Excel 2010

Oct 11, 2015

I used sql server 2012 express Import and Export Data (32-bit) wizard to import data from excel 2010 to a given table. But I got the following error message: Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.An OLE DB record is available.  Source: "Microsoft SQL Server Native Client 11.0"  Hresult: 0x80004005  Description: "Unspecified error". (SQL Server Import and Export Wizard)
 
Error 0xc020901c: Data Flow Task 1: There was an error with Destination - MPRecord.Inputs[Destination Input].Columns[Top1] on Destination - MPRecord.Inputs[Destination Input]. The column status returned was: "The value violated the integrity constraints
for the column.". (SQL Server Import and Export Wizard)
 
Error 0xc0209029: Data Flow Task 1: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR.  The "Destination - MPRecord.Inputs[Destination Input]" failed because error code 0xC020907D occurred, and the error row disposition on "Destination - MPRecord.Inputs[Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component.  There may be error messages posted before this with more information about the failure. (SQL Server Import and Export Wizard)
 
Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED.  The ProcessInput method on component "Destination - MPRecord" (35) failed with error code 0xC0209029 while processing input "Destination Input" (48). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.  There may be error messages posted before this with more information about the failure.

View 2 Replies View Related

SQL 2012 :: Facing Deadlocks During Updates On Heap Table

Mar 5, 2014

Facing deadlock issues in my ETL job .

The driver table , which keeps track of what datamarts ran and for what date range gets updated frequently during the etl run . There can be as many as 250 updates issued on this table in a single second.

Now this table is a heap , and there are no indexes on it .

During these updates , we encounter deadlocks causing the ETL job to fail .

Will adding an index faciltate?

View 4 Replies View Related

Cumulative Wait Time On Server Replies ???

Jul 20, 2005

Hello all,I've got a query which suddently became very slow. It now takes about 10secs instead of 2 secs.I've got to identical DB (one is for test and the other is production). Thequery is slow only in production.When running this query in both DB and looking at execution plan,statistics, etc, the onle difference is the Cumulative wait time on serverreplies.In test DB, I get the value: 2200And in production DB: 1.22344e+009What does this mean concretly? What do I have to do to solve this problem?TIA.YannickPS I'm using SS2000 SP3 on NT4.0

View 4 Replies View Related

SQL Server 2005 Cumulative Hot Fix Doesn't Install On X86

Aug 3, 2006

I'm trying to install the cumulative hot fix (build 2153) on an x86 machine. I'm running the first of the six install EXEs, and I'm not able to select any of the checkboxes on the Feature Selection tab of the wizard.

I see three checkboxes. The first is SQL Server Database Services 2005 and beneath it two child nodes: MSSQLSERVER (RTM 1399 ENU) and SQLEXPRESS (RTM 1399 ENU)

None of the checkboxes allow me to select them and when I click the Next button on the screen I get the following:

"You have not selected any active products or instances. You must select at least one active product or instance to patch in order to proceed."





View 3 Replies View Related

SQL Server Admin 2014 :: Query To Get Cumulative Package

Feb 6, 2014

Query to get CU# of sql server Instance ?

View 3 Replies View Related

Applying SQL Server 2000 Vacancies

Dec 6, 2001

I am DBA and have worked for 3 years on sql Server 7 production servers. I briefly looked at SQL 2000 on desktop edition.

Should I be worried about applying for dba positions which have SQL 2000 production server environment. Companies will ask how much SQL 2000 experiance I have. I feel a little nervous as I have not the exposure to a live SQL 2000 production server environment.
From what I have seen the bread and butter DBA tasks have not changed between sql 7 and sql 2000.
I am hoping to get the opinion of fellow DBA's on this subject.
Thanks Pargat

View 2 Replies View Related

Applying SQL Server 2000 Vacancies

Nov 29, 2001

I am DBA and have worked for 3 years on sql Server 7 production servers. I briefly looked at SQL 2000 on desktop edition.

Should I be worried about applying for dba positions which have SQL 2000 production server environment. Companies will ask how much SQL 2000 experiance I have. I feel a little nervous as I have not the exposure to a live SQL 2000 production server environment.
From what I have seen the bread and butter DBA tasks have not changed between sql 7 and sql 2000.
I am hoping to get the opinion of fellow DBA's on this subject.
Thanks Pargat

View 1 Replies View Related

Applying Service Packs To SQL Server 2000 Instance Attached To Sql Server 2005

Jan 8, 2008

Hi,

I have an interesting situation here. I have a SQL Server 2000 database which is attached to SQL Server 2005. The database (SQL 2000) however only has service pack 3 applied. I need to apply SP4 before I can move forward with SQL 2000->2005 upgrade. The question: can I somehow apply this support package with my current configuration or should I install full SQL 2000 front-end anew (which I don't have at the moment)? Whenever I try to run SQL 2000 SP4 it complains "SQL Server 2000 is not installed on this machine."

The server I try to install the update is Windows Server 2003 R2 Standard Edition x64. SQL Server 2000 database itself is x86 (obviously).

Thanks.

View 4 Replies View Related

Applying SP1 On Sql Server Express Production Environment

May 30, 2006

How do you apply Service Pack 1 to Sql Server Express 2005?

View 1 Replies View Related

SQL 2012 :: Can SSIS And Database Engine Be Linked To SSAS

Feb 12, 2014

I have a server which has SQL Server 2012 SSAS.

My client wants SSIS and database engine to be installed to be mapped to this analysis services engine.

Is that possible?

View 3 Replies View Related

Standby Server - Applying Transaction Logs Automatically

Jun 21, 2001

Can anyone direct me to a code that would automatically apply transaction logs to a DB in the standby server? We have a process that dumps the transaction log backup from the primary server into the backup server every hour on the hour, but I need to apply that transaction log as soon as it is in the standby server.

I am sure someone will ask, why not do transactional replication or log shipping? My answer to that is I have yet to learn how to setup replication between servers. I need to get our backup server up and running in the next few days.

Thanks in advance for your help.

Helen

View 1 Replies View Related

Msmq Missing Messages After Applying SP3a To SQL Server

Jan 12, 2004

Used to work fine:
(windows 200 server, sql server 2000, JDBC driver SP2.)
Two java processes, one sending messages (using jdbc and sql as temp storage), second is receiving and placing on msmq.

After installing SP3a for SQL server, under high load (200 a sec) there are missing messages in msmq.
Installed everything from scratch on separate machine, works fine until SP3a is applied.
Any help is highly appreciated

View 3 Replies View Related

SQL Server 2008 :: How To Avoid Restart After Applying Patching

Aug 28, 2015

I am going to apply SQL ServicePack 3 in our production Server . Is it possible to avoid restart ?

View 2 Replies View Related

SQL 2012 :: Close ALL Connections To Particular Database Engine In Management Studio?

Jul 14, 2015

In SQL Server Management Studio, it is possible to do the following:

a) In Object Explorer, connect to a particular SQL Server Database Engine, let's call it X.
b) Use that connection to generate many SQL queries, connected to X, in the right-hand pane.
c) In Object Explorer, connect to a particular SQL Server Database Engine, let's call it Y.
d) Use that connection to generate many SQL queries, connected to Y, in the right-hand pane.
e) Close the connection to X, which was created in step (a), from within Object Explorer.

In the right-hand pane, I am now left with a bunch of queries connected to X, and a similar bunch of queries connected to Y. Any quick way to shut all the queries connected to X, but none of the queries connected to Y?

This question can assume real practical importance if server X is a Live Production Server, and server Y is a Test Server, and my next job of the day is to run a change script against server Y....

I have looked for an option in Management Studio to "Close all queries connected to Server X", but haven't found one.

View 6 Replies View Related

DB Engine :: 2012 Database Stuck In Recovery Pending Status?

Jan 12, 2013

I have a SQL cluster which ran out of disk the other day.  I threw plenty more disk at the SAN.  However, 1 of the databases came back with Recovery Pending and has been over 24 hours.  I have tried to backup the database with no success.  I don't have a clean backup from the day it occured so would have a good amount of work missing.

Running a dbcc check returns the following:

Msg 945, Level 14, State 2, Line 1

Database 'sqldb' cannot be opened due to inaccessible files or insufficient memory or disk space.  See the SQL Server errorlog for details.

I have not tried a dbcc check with REPAIR_ALLOW_DATA_LOSS as there seems to be a high risk of losing whatever was going on.  how I can get the db back online?

View 10 Replies View Related

Setup And Upgrade :: 2012 - Database Engine Services Failed

Mar 26, 2013

I can't install the SQL Server 2012 Express version with tools downloaded from [URL]

I'm getting the following error: 

Error installing SQL Server Database Engine Services Instance Features
Could not find the Database Engine startup handle.
Error code: 0x851A0019

I'm trying to install a new stand-alone version with a default instance but always getting this error. From the features I'm installing the database engine services (not the replication), all the tools, only the basic management toolds and the SQL Client connectivity SDK.

Further in the installation I'm choosing the Windows authentication and in the list of SQL administrators I've already tried to install as current user but also as System. Both with the same error result.

[URL]

Note: Visual studio is not installed.

View 8 Replies View Related

DB Engine :: 2012 EE SP2 / How To Auto-kill Sessions That Overuse TempDB

Jul 15, 2015

We have SQL Server 2012 EE SP2 server that is getting hit by reports that time-to-time use up to 300GB of tempdb.

It's happening because our clients can use 'bad' parameters for some reports.

Is there a way to autokill sessions that overuse tempdb (for example, if a session uses more than 15Gb in tempdb)?

Killing can happen immediately or after regular check (5 min for example).

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved