We got an error "Failed Virtual Allocate Bytes: FAIL_VIRTUAL_RESERVE"
Microsoft SQL Server 2005 - 9.00.5000.00 (Intel X86)
Dec 10 2010 10:56:29
Copyright (c) 1988-2005 Microsoft Corporation
Developer Edition on Windows NT 5.2 (Build 3790: Service Pack 2)
We had 24CPU intell cores and 64 gb RAM on server.
Sql service starts with enabled AWE + LPM and "-g512" option.
Why we still use such relic configuration it is not my fault. i'm investigate log and find that memorystatus "Optimization Queue" section has really huge values.
Optimization Queue
Overall Memory = 1321132032Target Memory = 1158799360 Last Notification = GROW Timeout = 6 Early Termination Factor = 5Small Gateway Configured Units = 32 Available Units = 26 Acquires = 6 Waiters = 0 Threshold Factor = 250000 Threshold = 250000Medium Gateway Configured Units = 8 Available Units = 7 Acquires = 1 Waiters = 0 Threshold Factor = 12 Threshold = 16094435Big Gateway Configured Units = 1 Available Units = 1 Acquires = 0 Waiters = 0 Threshold Factor = 8 Threshold = 144849920
[code]...
What forced bPOOL to allocate pages in MTL? How to determine that queries? Same about SQL OS.As workaround i increase -g startup option to "-g2048", and "max server memory" was decreased to 54Gb.
do all sql data types consume whole numbers of bytes? We have an app that might be best suited to bit manipulation at the nibble rather than byte level.
The following is the report from the SQL Server Mobile Subscription wizzard, Any Ideas?
New Subscription Wizard
- Beginning Synchronization (Success)
- Synchronizing Data (100%) (Error)
Messages
A call to SQL Server Reconciler failed. Try to resynchronize. HRESULT 0x80004005 (29006)
The Publisher failed to allocate a new set of identity ranges for the subscription. This can occur when a Publisher or a republishing Subscriber has run out of identity ranges to allocate to its own Subscribers or when an identity column data type does not support an additional identity range allocation. If a republishing Subscriber has run out of identity ranges, synchronize the republishing Subscriber to obtain more identity ranges before restarting the synchronization. If a Publisher runs out of identit HRESULT 0x80045647 (0)
Invalid parameter @subid specified for sys.sp_MSmerge_log_idrange_alloc_on_distributor. HRESULT 0x0000523F (0)
The operation could not be completed.
- Finalizing Synchronization (Stopped)
- Saving Subscription Properties (Stopped)
Initially i thought it might be that some of the articles had primary keys that were of type nvarchar rather then Int thus resulting in no identity range being able to be assigned to those articles.
Test 1: I tried removing all articles that had nvarchar primary keys and left only one table that had an identity Int primary key colum. I then ran the snapshot agent. I then run through the Subscription Wizzard again and the error was the same.
Test 2: Then reading the error message again i tried those tables that didnt use identity columns and the wizzard completed successfully. Any idea what would be wrong with my articles that have identity columns. The article properties for the identity columns use the Identity Range Management defaults.
I have two publications. Some of the data are the same on the two publications. Both are configured as follow : The identity range management is set to "automatic" and the tracking-level is set to "Column-level tracking". Until there, every things works fine.
But, if i'm deleting one of the publication and if i'm deleting one of the rows that were replicated on the two publications i'm getting the following SQL Exception : "Invalid object name 'dbo.MSmerge_repl_view_1CAD32C4FF904A3CA27518B0C4BFF716_70308DE2261C4EC784C56131902E7D1C'"
If i'm watching the status of the leftover replication through the replication monitor, i get this error message :
"Error messages: The Publisher failed to allocate a new set of identity ranges for the subscription. This can occur when a Publisher or a republishing Subscriber has run out of identity ranges to allocate to its own Subscribers or when an identity column data type does not support an additional identity range allocation. If a republishing Subscriber has run out of identity ranges, synchronize the republishing Subscriber to obtain more identity ranges before restarting the synchronization. If a Publisher runs out of identit (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147199417) Get help: http://help/MSSQL_REPL-2147199417 The publisher's identity range allocation entry could not be found in MSmerge_identity_range table. (Source: MSSQLServer, Error number: 20663) Get help: http://help/20663"
I checked the given links but they're useless.
So I tried to reinitialize the subscription with the "use a new snapshot" option enabled without any success either. I did only obtain a new error message :
"The publisher's identity range allocation entry could not be found in MSmerge_identity_range table.
Transaction count after EXECUTE indicates that a COMMIT or ROLLBACK TRANSACTION statement is missing. Previous count = 1, current count = 2.
Failed to pr"
I didnt have any idea to correct this issue, so I would appreciate any help.
When I try to add a (SQL Server 2005 Express Edition) database to my project (I'v tried a windows application and an ASP.NET application) in Visual Studio 2005 Professional Edition; It fails with an error like this : "create database failed. some file names listed could not be created (...)" but when I open the project from the real path It works. Is this a bug? Is there any solution? (In many situations there is a need for working with virtual drives. There must be some work around ...)
Product : Database Services (MSSQLSERVER) Product Version (Previous): 1399 Product Version (Final) : Status : Failure Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log Error Number : 29512 Error Description : MSP Error: 29512 SQL Server Setup was unable add user NT AUTHORITYSYSTEM to local group DCCIBERSQLServer2005SQLAgentUser$DCSQL01$MSSQLSERVER.
I have a clean SQL 2005 Ent. x64 SP1 clean with no user db's.....applied SP2 and everything showed "Success" except the Database Services (Error 29534)......
Time: 02/22/2007 08:29:50.134 KB Number: KB921896 Machine: TORCA8 OS Version: Microsoft Windows Server 2003 family, Enterprise Edition Service Pack 1 (Build 3790) Package Language: 1033 (ENU) Package Platform: x64 Package SP Level: 2 Package Version: 3042 Command-line parameters specified: Cluster Installation: No
********************************************************************************** Prerequisites Check & Status SQLSupport: Passed
********************************************************************************** Processes Locking Files Process Name Feature Type User Name PID
********************************************************************************** Product Installation Status Product : Setup Support Files Product Version (Previous): 2047 Product Version (Final) : 3042 Status : Success Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_SqlSupport.msi.log Error Number : 0 Error Description : ---------------------------------------------------------------------------------- Product : Database Services (MSSQLSERVER) Product Version (Previous): 2047 Product Version (Final) : Status : Failure Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log Error Number : 29534 Error Description : MSP Error: 29534 Service 'MSSQLSERVER' could not be started. Verify that you have sufficient privileges to start system services. The error code is (1067) The process terminated unexpectedly.
---------------------------------------------------------------------------------- Product : Analysis Services (MSSQLSERVER) Product Version (Previous): 2047 Product Version (Final) : 3042 Status : Success Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixOLAP9_Hotfix_KB921896_sqlrun_as.msp.log Error Number : 0 Error Description : ---------------------------------------------------------------------------------- Product : Reporting Services (MSSQLSERVER) Product Version (Previous): 2047 Product Version (Final) : 3042 Status : Success Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRS9_Hotfix_KB921896_sqlrun_rs.msp.log Error Number : 0 Error Description : ---------------------------------------------------------------------------------- Product : Notification Services Product Version (Previous): 2047 Product Version (Final) : 3042 Status : Success Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixNS9_Hotfix_KB921896_sqlrun_ns.msp.log Error Number : 0 Error Description : ---------------------------------------------------------------------------------- Product : Integration Services Product Version (Previous): 2047 Product Version (Final) : 3042 Status : Success Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixDTS9_Hotfix_KB921896_sqlrun_dts.msp.log Error Number : 0 Error Description : ---------------------------------------------------------------------------------- Product : SQL Server Native Client Product Version (Previous): 2047 Product Version (Final) : 3042 Status : Success Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_sqlncli.msi.log Error Number : 0 Error Description : ---------------------------------------------------------------------------------- Product : Client Components Product Version (Previous): 2047 Product Version (Final) : 3042 Status : Success Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQLTools9_Hotfix_KB921896_sqlrun_tools.msp.log Error Number : 0 Error Description : ---------------------------------------------------------------------------------- Product : MSXML 6.0 Parser Product Version (Previous): 3890 Product Version (Final) : 6.10.1129.0 Status : Success Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_msxml6.msi.log Error Number : 0 Error Description : ---------------------------------------------------------------------------------- Product : SQLXML4 Product Version (Previous): 2047 Product Version (Final) : 3042 Status : Success Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_sqlxml4.msi.log Error Number : 0 Error Description : ---------------------------------------------------------------------------------- Product : Backward Compatibility Product Version (Previous): 1704 Product Version (Final) : 2004 Status : Success Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_SQLServer2005_BC.msi.log Error Number : 0 Error Description : ---------------------------------------------------------------------------------- Product : Microsoft SQL Server VSS Writer Product Version (Previous): 2047 Product Version (Final) : 3042 Status : Success Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_SqlWriter.msi.log Error Number : 0 Error Description : ----------------------------------------------------------------------------------
********************************************************************************** Summary One or more products failed to install, see above for details Exit Code Returned: 29534
Now SQL Server service won't restart.....
2007-02-22 10:16:31.28 Server Microsoft SQL Server 2005 - 9.00.3042.00 (X64) Feb 10 2007 00:59:02 Copyright (c) 1988-2005 Microsoft Corporation Enterprise Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 1)
2007-02-22 10:16:31.28 Server (c) 2005 Microsoft Corporation. 2007-02-22 10:16:31.28 Server All rights reserved. 2007-02-22 10:16:31.28 Server Server process ID is 2056. 2007-02-22 10:16:31.28 Server Authentication mode is MIXED. 2007-02-22 10:16:31.28 Server Logging SQL Server messages in file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'. 2007-02-22 10:16:31.28 Server This instance of SQL Server last reported using a process ID of 576 at 2/22/2007 10:16:15 AM (local) 2/22/2007 3:16:15 PM (UTC). This is an informational message only; no user action is required. 2007-02-22 10:16:31.28 Server Registry startup parameters: 2007-02-22 10:16:31.28 Server -d E:SQLDatamaster.mdf 2007-02-22 10:16:31.28 Server -e C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG 2007-02-22 10:16:31.28 Server -l F:SQLLogsmastlog.ldf 2007-02-22 10:16:31.28 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required. 2007-02-22 10:16:31.28 Server Detected 4 CPUs. This is an informational message; no user action is required. 2007-02-22 10:16:31.28 Server Cannot use Large Page Extensions: lock memory privilege was not granted. 2007-02-22 10:16:31.40 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required. 2007-02-22 10:16:31.42 Server Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required. 2007-02-22 10:16:31.50 spid1s A significant part of sql server process memory has been paged out. This may result in a performance degradation. Duration: 0 seconds. Working set (KB): 36200, committed (KB): 104760, memory utilization: 34%. 2007-02-22 10:16:33.45 Server Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required. 2007-02-22 10:16:33.45 Server Database mirroring has been enabled on this instance of SQL Server. 2007-02-22 10:16:33.47 spid5s Starting up database 'master'. 2007-02-22 10:16:33.47 spid5s SQL Trace ID 1 was started by login "sa". 2007-02-22 10:16:33.48 spid5s Starting up database 'mssqlsystemresource'. 2007-02-22 10:16:33.48 spid5s The resource database build version is 9.00.3042. This is an informational message only. No user action is required. 2007-02-22 10:16:33.48 spid5s Error: 5173, Severity: 16, State: 1. 2007-02-22 10:16:33.48 spid5s One or more files do not match the primary file of the database. If you are attempting to attach a database, retry the operation with the correct files. If this is an existing database, the file may be corrupted and should be restored from a backup. 2007-02-22 10:16:33.48 spid5s Error: 5173, Severity: 16, State: 1. 2007-02-22 10:16:33.48 spid5s One or more files do not match the primary file of the database. If you are attempting to attach a database, retry the operation with the correct files. If this is an existing database, the file may be corrupted and should be restored from a backup. 2007-02-22 10:16:33.48 spid5s Log file 'F:SQLLogsmssqlsystemresource.ldf' does not match the primary file. It may be from a different database or the log may have been rebuilt previously. 2007-02-22 10:16:33.48 spid5s The log cannot be rebuilt when the primary file is read-only. 2007-02-22 10:16:33.48 spid5s Error: 945, Severity: 14, State: 2. 2007-02-22 10:16:33.48 spid5s Database 'mssqlsystemresource' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details. 2007-02-22 10:16:33.48 spid5s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
Tried reinstalling SP 2 in quiet mode using sapwd parameter.....now everything is showing the correct SP2 version but SQL Server Service won't start.......anyone????????
Recently one of our DB went to suspect mode, we have resolved it(repair_allow_dataloss) and DB came online but when we fire CheckDB on that it is throwing following error
Msg 7985, Level 16, State 2, Line 2 System table pre-checks: Object ID 3. Could not read and latch page (1:355) with latch type SH. Check statement terminated due to unrepairable error. DBCC results for 'xxxxxxx'. Msg 5233, Level 16, State 98, Line 2 Table error: alloc unit ID 196608, page (1:355). The test (IS_OFF (BUF_IOERR, pBUF->bstat)) failed. The values are 12716041 and -4. CHECKDB found 0 allocation errors and 1 consistency errors not associated with any single object. CHECKDB found 0 allocation errors and 1 consistency errors in database 'xxxxxxx'.
And error log is also continuously popping the below message
Error:
824, Severity: 24, State: 2. SQL Server detected a logical consistency-based I/O
I am just new in SQL 2012 r2 and we are trying to provision one SQL VM but we are getting an error a"Login failed for user. "Error 18456" when trying to login to the Database Engine for the 1st time via SQL Management Studio. URL...
2015-05-06 12:44:49.57 Logon    Error: 18456, Severity: 14, State: 5. 2015-05-06 12:44:49.57 Logon    Login failed for user 'SDAdmin'. Reason: Could not find a login matching the name provided. [CLIENT: <local machine>]
I have a VM with Windows Server 2012 and SQL 2014 installed. Some things about the VM: Using VMware Workstation 11. Created with 160 GB hard disk and 4G memory (that's all we could do when needing to run multiple VMs from the box we're using). I am able to get to the internet and to our network but the internet connection tells me that there is no internet access and we can't seem to fix it.When I attempt to create a backup of one of my DBs, I receive the attached error. No other backup has been created for this particular DB so it would not need to overwrite anything. This is an issue for all of the DBs that are in the SQL Server and not just an isolated DB.
We ran DBCC CHECKDB against the DB and no errors were returned.A bit about the DBs: Our software creates a number of empty DBs upon install. For testing purposes we have DBs that are populated with data that we restore once the install is complete. So our procedure is, once all services are shut down for our software and the SQL connection has been cut, we delete the DBs created during install and restore the DBs that will replace them. All of the DBs restored successfully so I don't understand why there would be an issue with backing them up.Â
I tried to apply the SP2 on a newly installed SQL Server 2005 Developer edition. The installation failed and the MSSQLSERVER service does not start. I work on 32 bits Windows Server 2003 Standard Edition SP1 with all the patches up to date. I downloaded SQL Server 2005 SP2 on March 15, 2007.
Here are the error messages from 2 of the log files:
Summary.txt:
Product : Database Services (MSSQLSERVER) Product Version (Previous): 1399 Product Version (Final) : Status : Failure Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log Error Number : 29534 Error Description : MSP Error: 29534 Service 'MSSQLSERVER' could not be started. Verify that you have sufficient privileges to start system services. The error code is (-2146885628) Cannot find object or property.
SQL9_Hotfix_KB921896_sqlrun_sql.msp.log:
Doing Action: ComponentUpgradeInstall PerfTime Start: ComponentUpgradeInstall : Sun Mar 18 17:37:33 2007 <Func Name='ComponentUpgradeInstall'> <Func Name='ComponentUpgrade'> Failed to add file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG' to datastore in AddFileToFailureHandling Service MSSQLSERVER with parameters '-r' is being started at Sun Mar 18 17:37:33 2007 Failed to start service MSSQLSERVER. Error code 2148081668 Service failed unexpectedly (2148081668) Error Code: -2146885628 Windows Error Text: Cannot find object or property. Source File Name: sqlsetuplibservice.cpp Compiler Timestamp: Wed Jun 14 16:29:04 2006 Function Name: sqls::Service::Start Source Line Number: 301
And below you can see the content of the SQL error log:
2007-03-18 19:46:11.51 Server Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86) Feb 9 2007 22:47:07 Copyright (c) 1988-2005 Microsoft Corporation Developer Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
2007-03-18 19:46:11.51 Server (c) 2005 Microsoft Corporation. 2007-03-18 19:46:11.51 Server All rights reserved. 2007-03-18 19:46:11.53 Server Server process ID is 796. 2007-03-18 19:46:11.53 Server Authentication mode is WINDOWS-ONLY. 2007-03-18 19:46:11.53 Server Logging SQL Server messages in file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'. 2007-03-18 19:46:11.53 Server This instance of SQL Server last reported using a process ID of 712 at 3/18/2007 5:39:48 PM (local) 3/18/2007 3:39:48 PM (UTC). This is an informational message only; no user action is required. 2007-03-18 19:46:11.53 Server Registry startup parameters: 2007-03-18 19:46:11.53 Server -d C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf 2007-03-18 19:46:11.53 Server -e C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG 2007-03-18 19:46:11.53 Server -l C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf 2007-03-18 19:46:11.56 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required. 2007-03-18 19:46:11.56 Server Detected 2 CPUs. This is an informational message; no user action is required. 2007-03-18 19:46:11.87 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required. 2007-03-18 19:46:11.98 Server Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required. 2007-03-18 19:46:14.06 Server Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required. 2007-03-18 19:46:14.06 Server Database mirroring has been enabled on this instance of SQL Server. 2007-03-18 19:46:14.07 spid5s Starting up database 'master'. 2007-03-18 19:46:14.15 spid5s 1 transactions rolled forward in database 'master' (1). This is an informational message only. No user action is required. 2007-03-18 19:46:14.17 spid5s 0 transactions rolled back in database 'master' (1). This is an informational message only. No user action is required. 2007-03-18 19:46:14.17 spid5s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required. 2007-03-18 19:46:14.37 spid5s SQL Trace ID 1 was started by login "sa". 2007-03-18 19:46:14.42 spid5s Starting up database 'mssqlsystemresource'. 2007-03-18 19:46:14.50 spid5s The resource database build version is 9.00.3042. This is an informational message only. No user action is required. 2007-03-18 19:46:14.89 spid5s Server name is 'YODA'. This is an informational message only. No user action is required. 2007-03-18 19:46:14.89 spid9s Starting up database 'model'. 2007-03-18 19:46:15.06 spid9s Clearing tempdb database. 2007-03-18 19:46:15.67 spid9s Starting up database 'tempdb'. 2007-03-18 19:46:15.79 spid12s The Service Broker protocol transport is disabled or not configured. 2007-03-18 19:46:15.79 spid12s The Database Mirroring protocol transport is disabled or not configured. 2007-03-18 19:46:15.82 spid12s Service Broker manager has started. 2007-03-18 19:46:21.62 Server The server could not load the certificate it needs to initiate an SSL connection. It returned the following error: 0x8009030d. Check certificates to make sure they are valid. 2007-03-18 19:46:21.62 Server Error: 17190, Severity: 16, State: 1. 2007-03-18 19:46:21.62 Server FallBack certificate initialization failed with error code: 1. 2007-03-18 19:46:21.62 Server Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate. 2007-03-18 19:46:21.64 Server Error: 17182, Severity: 16, State: 1. 2007-03-18 19:46:21.64 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x80. 2007-03-18 19:46:21.64 Server Error: 17182, Severity: 16, State: 1. 2007-03-18 19:46:21.64 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x1. 2007-03-18 19:46:21.64 Server Error: 17826, Severity: 18, State: 3. 2007-03-18 19:46:21.64 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log. 2007-03-18 19:46:21.64 Server Error: 17120, Severity: 16, State: 1. 2007-03-18 19:46:21.64 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
I have a logon trigger on a SQL Server 2008 R2 Express Advanced production database to prevent remote logons. The trigger works fine. When I need to connect via my local machine, remotely, I connect via a VPN, can connect with SSMS and do whatever I need. However, if I use a linked server on my local machine (still connected via VPN), I receive the logon error
Msg 17892, Level 14, State 1, Line 1 Logon failed for login 'sa' due to trigger execution.
The trigger is below and it logs any failures, except for the linked server.
If I disable the trigger, the linked server connects ok.
CREATE TRIGGER [tr_MasterLogon] Â Â ONÂ ALL SERVERÂ WITH EXECUTE AS 'sa' Â Â FOR LOGON AS BEGIN Â DECLARE Â Â @ClientAddress varchar(48) = (SELECT client_net_address
i have a sql server job scheduled to run daily twice.the job is running fine , but once  or twice a week the job fails saying."Message Unable to connect to SQL Server '(local)'.  The step failed." all other times the job runs successfully. it randomly the job is failing. once its failed and if i try to run it manually it runs fine or it will start running fine from next schedule onwards.This job mainly executes a stored procedure.the owner of the job is setup as sa. i don't understand why its fail randomly and all other times(90% of cases) it successful."Unable to connect to SQL Server '(local)'.  The step failed."
I have a SQl2k8 R2 up and running on a win2k8 R2, I have a domain controller as well with AD 2k8 R2. It works fine but from time to time I receive a dozen of successive alerts like th folowing
DATE/TIME:      11/22/2010 12:19:57 PM  DESCRIPTION: SSPI handshake failed with error code 0x80090311, state 14 while establishing a connection with integrated security; the connection has been closed. Reason: AcceptSecurityContext failed. The Windows error code indicates the cause of failure.  COMMENT:      (None) JOB RUN:           (None)
I understand from some threads here that it is an issue related to contacting the AD. In event viewer it is not clear what is casuing this. I have WSS databases, Biztalk server databases.....and some other user databases. NO home made applications contact sql server.  What is the best route to follow to see who is not being able sometimes and why contacting the AD. I read the thread at URL.... but it is related to express 2005 and it does not apply to my case.
Hi all, I got an error when i use crystal reports to open a report of a database in a web application. I use the server as Oracle 10g. The error is as follows.:
Logon failed. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
I have a database size of 9.8TB and I backup it to 30 backup devices. Each one has 110GB after backup compression.I tried to restore these files to standby server via 100MbE network but it always failed. My colleague told me this never happen before and I said yes because I have done this before a lot of times when backup devices are significantly smaller.He said the only way is to copy backup files locally and restore locally. But I am trying another method, I create more: 64(maximum) backup devices and try to restore via network again.SQL server version is Microsoft SQL Server 2012 (SP1)
- 11.0.3401.0 (X64)  Jan 9 2014 13:22:15  Copyright (c) Microsoft Corporation Enterprise Edition: Core-based Licensing (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) .
When I execute the following transaction log backup TSQL in SSMS
BACKUP LOG ProductDBÂ TO DISK = 'D:Database_BackupTransProductDB.trn';
I get this error:
Msg 3201, Level 16, State 1, Line 2 Cannot open backup device 'D:Database_BackupTransProductDB.trn'. Operating system error 21(The device is not ready.). Msg 3013, Level 16, State 1, Line 2 BACKUP LOG is terminating abnormally.
I also have a daily database backup job that puts the backup file under this directory.
D:Database_BackupData
So I changed the path to this and it still fails.
BACKUP LOG ProductDBÂ TO DISK = 'D:Database_BackupDataProductDB.trn';
However if I change it to this path, it works:
BACKUP LOG ProductDBÂ TO DISK = 'MyServerDataProductDB.trn';
This turns out to be the path I used a few weeks back when I backed up the log for the very first time. Â But I now wanted to store my transaction log backups in D:Database_BackupTrans. Â
I can't install the SQL Server 2012 Express version with tools downloaded from [URL]
I'm getting the following error:Â
Error installing SQL Server Database Engine Services Instance Features Could not find the Database Engine startup handle. Error code: 0x851A0019
I'm trying to install a new stand-alone version with a default instance but always getting this error. From the features I'm installing the database engine services (not the replication), all the tools, only the basic management toolds and the SQL Client connectivity SDK.
Further in the installation I'm choosing the Windows authentication and in the list of SQL administrators I've already tried to install as current user but also as System. Both with the same error result.
I have a procedure that works fine from SSMS but sometimes fails when running via SQL Agent. The SP sends emails..Here is the error message "Failed to initialize sqlcmd library with error number -2147467259"
We have server with Sql2008 R2 RTM 64 bit standard edition.We installed 2012 sp1 64 bit standard edition in win2012sp1 64 bit as side by side setup.After installation, i found the below error when i opened SSCM:
Remote Procedure Call Failed:
I fixed this error by renaming the MSC file.
At event log i am observing continuously below error:
Source:       Application Error   Event ID:     1000
Faulting application name: wmiprvse.exe, version: 6.3.9600.16384, time stamp: 0x5532e9c9
Faulting module name: svrenumapi100.dll, version: 2009.100.1600.1, time stamp: 0x4bb681be
In Management Studio i highlight my query and then click on 'Analyse query in Database Engine Advisor' but i get the following error message: "Failed to connect to an IPC Port: The system cannot find the file specified". Seems like if I reboot my computer it works one time then get the same error on the second time.I'm running developer edition with service pack 2.
Have 6 SQL Server 2012  failover clusters  environments on Windows 2012 R2 standard edition.Have intermittent connectivity issues when using Windows Authentication, with the error "test connection failed because of an error in initializing provider. login timeout expired" . Am checking by using a UDL file and have tried the below.
1) Have made port changes to use static 1433 port. 2) Have enabled shared memory and using Named Pipes and TCP/IP by using cliconfig. 3) Have turned off firewall. 4) Loopback is disabled 5) SQL Browser is running, have changed 'Built in Account setting'  from 'Local Service' to 'Network Service'. but with no effect.
Still I am getting intermittent connectivity issues.
My SQL Server 2005 SP4 on Windows 2008 R2 is flooded with the below errors:-
Date  10/25/2011 10:55:46 AM Log  SQL Server (Current - 10/25/2011 10:55:00 AM) Source  spid Message Event Tracing for Windows failed to send an event. Send failures with the same error code may not be reported in the future. Error ID: 0, Event class ID: 54, Cause: (null).  Is there a way I can trace it how it is coming? When I check input buffer for these ids, it looks like it is tracing everything. All the general application DMLs are coming in these spids.
Hi, I've got a table with 65'000 records and when I do a SELECT * FROM tablename ORDER BY Name I receive this error message:
Msg 1105, Level 17, State 1 Can't allocate space for object '-513' in database 'tempdb' because the 'system' segment is full. If you ran out of space in Syslogs, dump the transaction log. Otherwise, use ALTER DATABASE or sp_extendsegment to increase the size of the segment. Msg 1510, Level 17, State 2 Sort failed: Out of space or locks in database 'tempdb'
So I've dumped the transaction with no_log and also I've extended the segement from the master database (because tempdb is in it bydefault):
sp_extendsegment system, master
But I've still got the error message. Is there anybody who can advice me? Thank you
At the moment there is no data in the Place_No field.
I want to assign a Place_No to all records based on the number of Points (Total_Points). The highest Points value should have a place Number of 1 and so on.
However, where a number of applications have the same points I want to randomly allocate a place number for them. Application_ID 49, 96 and 155 all have 75 points so each of the 3 applications should be randomly allocated one of the following place numbers, 3, 4 and 5. I can not allocate them based on their order in the table as it has to be seen as a ‘lottery’ and each time it is run they would expect to get a different result.
The same thing then has to happen with the last 3 records in this sample allocating place numbers 6, 7 and 8
I was hoping to create a stored procedure to do this, but I’ve no idea where to begin. I would appreciate any help you could give. Thank you.
Hi, Sorry for placing it in SQL Server Forum.But I couldn't find a appropiate forum for my question.Can anybody help me? My question is - How to allocate expended memory in windows XP? Thanks!! Joydeep
I am getting a "Could not allocate space for object 'temp_trc' in database'Test' because the 'PRIMARY' filegroup is full"The database test has unrestricted growth (All the defaults). It resides ondrive c which has 4Gigs free. I added new data and log files on drive dwhich is about 30G free. I know that my insert doesn't take even 1G diskspace.Why is the database complaining about a full filegroup when I just expandedit?J.
Could anyone please help me in fixing this error asap...
Server: Msg 1105, Level 17, State 2, Line 1 Could not allocate space for object '(SYSTEM table id: -334560816)' in database 'TEMPDB' because the 'DEFAULT' filegroup is full.
This message is received on the client. Client pc has Intel 2Ghz or better processor, 512MB Ram, sufficient hard drive space, connecting to MS SQLServer 2000 thru TCP/IP.
Database server is running Windows 2000 Advanced Server w/ SP3 and MS SQLServer 2000 Enterprise Edition w/ SP3, with 4 way 700Mhz PIII Xeon processors and 4GB Ram (I'm not certain about network connectivity, but it's at least 100MB Ethernet). The database is approximately 87GB, with an average of 250 to 300 connections.
The application is vendor supplied, written in Visual Basic 3.0. Therefore I am using 16 bit SQL drivers, the latest I am aware of, dated 6/15/1997.
This database was previously running on SQLServer 7, and this error did not occur. It started after the upgrade to SQLServer 2000. We discovered this error in testing the upgrade and found that by decreasing the "Network Packet Size" setting on SQLServer w/ sp_configure, we were able to make the message go away. However now that we are in a production environment, the message seems to be coming back randomly. We have the NPS set to 1024 (default is 4096). I'm worried about performance if it is dropped much farther.
"Could not allocate new page for database 'TEMPDB'. There are no more pages available in filegroup DEFAULT. Space can be created by dropping objects, adding additional files, or allowing file growth."
I get this error when running a query on another database. But why?
Both data and transaction files on TEMPDB are set to "automatically grow file" and "unrestricted file growth" and there is 70GB of free space on the disk drive. Shouldn't the files just grow? Why would this happen?
I get the following error when doing a variety of basic queries on other databases:
"Could not allocate new page for database 'TEMPDB'. There are no more pages available in filegroup DEFAULT. Space can be created by dropping objects, adding additional files, or allowing file growth."
This doesn't make any sense since they are set to auto grow and there is plenty of disk space to do so.
Both data and transaction files of tempdb are set to: "Automatically grow file" is checked "Maximum file size" is set to "Unrestricted file growth" Growth rate of 10%
Both tempdb data file and transaction file are on D: but all drives have ample space: c:25 GB free D:69 GB free E:175 GB free
Could not allocate space for objects in database 'abc' And I have added 1 GB(1024 MB) of free space to primary file system of 'abc'. However now the primary file system of 'abc' database is 120 GB and the file properties are : Automatically grow file is checked, By percent 1 and restrict file growth: 121024 MB Still the database is showing as space avialable is 0.00, the total size is : 132186 MB
As of now I have't got any other alert, Please let me know if I get in the near future how to proceed??
One DTS package is running contunuously on this DB