DB Engine :: How To Restore From Current LDF Log File And Old BAK Backup File
Jun 11, 2015
My customer got a total hard drive failure.After sending it to drive recovery specialist we were able to recover the LDF log file (MyDB_0.LDF).But the MDF file was completely destroyed (MyDB.MDF).They have a good full backup from a month ago.
1) Installed SQL Server 2012 on a new PC
2) Created a new database of same name (MyDB) - with same MDF and LDF file names as original
3) Took the new database offline
4) deleted the MDF and LDF files of the new database
5) put "MyDB_0.LDF" in the place of the LDF file I just deletedÂ
6) put the database back on-line
7) after hitting F5 to refresh databases - it shows "MyDB (Recovery Pending)"
8) tried to do Tail Log Backup with this command
  BACKUP LOG [MyDB] TO DISK = N'C:BACKUPMyDB_TailLog.bak'
WITH NO_TRUNCATE
And I get this error...
Msg 3447, Level 16, State 1, Line 3
Could not activate or scan all of the log files for database 'MyDB'.
The sad thing is I know we can get this data back using ApexSQL-Log. I can see all the transactions since the last full backup in this program - so the log file is not damaged. But my client doesn't want to pay the $2000 fee for this software.There has to be a way to restore this data, without having to purchase a third party tool.
View 13 Replies
ADVERTISEMENT
Jul 8, 2015
I am working on a project for an SQL job. I am:
1.) Taking a database out of an availability group,
2.) Setting the recovery to simple,
3.) Shrinking the log file,
4.) Setting the recovery mode back to full,
5.) Then backing it up.
I need to restore the file to my secondary server with replace and non recovery mode. I am having trouble performing that call? I have the code to reestablish the database to the availability group if I can get the restore feature working.Â
View 11 Replies
View Related
May 8, 2015
I checked quickly one network  and I ran into the folders; I found out the folder MSSQL backup, nothing strange so far. Within that folder, anyway, I found out several backup and one very huge file (datawarehouse) with extension FILE. I am wondering what can be? I got datawarehouse mdf of course and datawarehouse log but what is that huge file (1 TB)?
View 6 Replies
View Related
Jun 25, 2015
One of our database came to Restoring mode. I suddenly stop my SQL service and Copied only MDF files again Started SQL service ,unexpectedly i dropped the Database. Now i cant able to attach the database only with my MDF file.
I tried below Scripts. All scripts shows same error.
EXEC sp_attach_single_file_db @dbname='PhoenixPolice',
@physname=N'C:Program FilesMicrosoft SQL ServerMSSQL10_50.MSSQLSERVERMSSQLPhoenixPolice.mdf'
GO
CREATE DATABASE PhoenixPolice ON
  (NAME = N'PhoenixPolice',
  FILENAME = N'C:Program FilesMicrosoft SQL ServerMSSQL10_50.MSSQLSERVERMSSQLPhoenixPolice.mdf')
FOR ATTACH_REBUILD_LOG
GO
CREATE DATABASE phoenixPolice ON (FILENAME = N'C:Program FilesMicrosoft SQL ServerMSSQL10_50.MSSQLSERVERMSSQLPhoenixPolice.mdf')
FOR ATTACH
All scripts shows below error
File activation failure. The physical file name "F:Microsoft SQL ServerMSSQL10_50.MSSQLSERVERMSSQLDATAPhoenixPolice_1.ldf" may be incorrect.
The log cannot be rebuilt because there were open transactions/users when the database was shutdown, no checkpoint occurred to the database, or the database was read-only. This error could occur if the transaction log file was manually deleted or lost due to a hardware or environment failure.
Msg 1813, Level 16, State 2, Line 1
Could not open new database 'PhoenixPolice'. CREATE DATABASE is aborted.
View 4 Replies
View Related
Sep 8, 2015
I got full backup on daily schedule its taking more space on Drive because each file has more than 25GB.I am using SLQ server 2008R2 so I'm looking to take the backup with compression instead of uncompressed Backup. What are the impacts of compressed backup. Is there any problems with compressed backup while restoring the backup file.
View 8 Replies
View Related
Aug 6, 2015
i have  .bak file  downloaded from internet , and i also have istalled  sql server  2012.my problem that i can not restore  this  .bak file and get this error massage :
System.Data.SqlClient.SqlError: The operating system returned the error '5(Access is denied.)' while attempting 'RestoreContainer::ValidateTargetForCreation' on 'C:Program FilesMicrosoft SQL ServerMSSQL10_50.MSSQLSERVERMSSQLDATASRO_VT_SHARD.mdf'. (Microsoft.SqlServer.SmoExtended)
- .bak file  version  = 661  10  50  1600 = sql server  2008R
- my sql version   = Microsoft SQL Server 2012 - 11.0.2100.60 (Intel X86)
View 4 Replies
View Related
Apr 1, 2008
I should restore a SQL Server 2005 Database from backup. The backup contains three files, named user.bak0, user.bak1 and user.bak2.
How is the syntax of the restore filelistonly and the restore database ... ?
I usualy write
restore filelistonly from disk = 'path and filenam.bak'
restore database. zy
from disk = 'path and filename.bak'
with replace,
move.....
move....
This works but I cannot use it with a splitted backup file. The files are much too big to put together to one file.
Thanks in advance for any help.
View 3 Replies
View Related
Oct 12, 2006
I tried to use backup and restore database tasks to restore backup file but it does not work. The backup file I tried to restore in SQL server 2000 is from somewhere else (from my friend) and saved in cd-rom, not the one I created before.
How can I restore it to view in SQL server 2000 database?
Can you show me step by step?
Thanks for your help
View 14 Replies
View Related
Oct 14, 1999
I have a production SQLServer 6.5 on Nt 3.51 SP4
that had problems two weeks ago, an I had
to restore the backup of the previous night.
we are testing our disaster recovery procedures
on another server, identical to the production
one.
We have installed NT 3.51 SP 4 and SQLServer 6.5
in the same order and with the same configuration
of the production server,
but i can't restore on the test server the
backup files that i have succesfully resotred
on the production server.
we make the SQLServer back up on file ( and
then we backup those files on tape with
NT backup) so I don't think is a problem
of HW Tape Bios or Compression because
i have tried to resotre directly the
files without taking them from a tape.
1)
I have created a new database , without data,
with the same devices, in megabyte, that I
have on the production server.
than from enterprise manager I have started
the restore from file, and after two seconds
everything stops, and I can't even shutdown
the task but i MUST turn the server off
using the power button.
when I start the server again there are
no specific errors in the event log nor
in the SQLServer error log.
The db i was trying to restore is marked
"loading" and it is not available.
This same procedure works perfectly
on the production server.
2)
I have then created another db on the test
server, and I have succesfully tranferred
( but not resotred) the produciont db
onto the test one, using the transfer menu
on SQLEnterprise manager.
3)
another strange thing is that I have tryed
to expand the tempdb, which is only 2 mega
by default, but whenever i try to expand it,
using enterprise manager, only the LOG area
of tempdb sucessfully expands, not the data area.
I don't know if this behaviour is related
to the unsuccesfull restore or if
it is another problem.
i have checked the sort order and character set
of the 2 servers and they are the same.
thanks in advance for any help.
Eugenio La Mesa
Publisoft
Italy
View 1 Replies
View Related
Jan 16, 2007
I have 2 questions, and I appreciate if somebody can help me to figure out the good way to do. Thanks a lot.
1/. If I want to restore tranlog backup file from linked server to SQL Server 2000, Is the database online or offline during that time (since I want to make sure db online for users, but not offline)
2/. Can I restore tranlog backup file from SQL Server 2000 to SQL Server 2005 database?
View 14 Replies
View Related
May 4, 2015
Now i must restore a database from a backup file of MS SQL Sever 6.5,but this file is bad. When i restore database from this file, SQL Server tell me that the format of this file is not file format of SQL Server 6.5.So that I must repair this backup file firstly. I don't know database file format of SQL Server 6.5.
View 2 Replies
View Related
Nov 24, 2006
Hi,
i have a backup file , and i saw the wizard to restore the file in sql2005.
But i need to restore only a table.
Is there a wizard for that?
View 11 Replies
View Related
Mar 19, 2001
Hello,
I have a user database which has 1 data file and 1 logfile.
I did a complete backup of the database to a file on the disk drive, using Enterprise manager. Due to some reason, I had to drop the database. The only way I could restore it was by,
1. Create the database with the same name.
2. Restore the complete backup from the file device.
While doing so,
I get the message "Backup set holds the backup of daatabase other than the existing 'userdbname' database. BAckup terminating."
Is it because the database was dropped and recreated.
If I choose the option to overwrite, it restores successfully.
Is this normal and right way to do it? Is there any thing else that I need to take care of, while backup or restore?
Any suggestions welcome.
Thanks,
MMS
View 3 Replies
View Related
Jul 24, 2001
I need to restore a backup file which resites on a network share to my local Sql70 server. Is it possible to restore a database from a backup file on the network share? Thanks!
View 3 Replies
View Related
May 6, 2008
hi
can you posible one tabel restore in database using full backfile
thanks
View 1 Replies
View Related
Jun 4, 2008
hi
i have restore database use backup file in another machine of same name of database there following error
TITLE: Microsoft SQL Server Management Studio
------------------------------
Restore failed for Server 'database name'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Restore+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The backup set holds a backup of a database other than the existing 'dbname' database.
RESTORE DATABASE is terminating abnormally. (Microsoft SQL Server, Error: 3154)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=3154&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
View 1 Replies
View Related
Sep 7, 2006
This script will read the contents of a DB backup file, and generate a restore command.
Set the value of parameter @backup_path to point to the backup file, run in Query Analyzer, cut/paste the output into another Query Analyzer window, modify as necessary, and run.
This is just a barebones script to demo how this can be done. Modify as necessary to meet your own needs.
Works in SQL 2000 and 7.0. May work in SQL 2005, but it is not tested.
-- Create Restore Database Command from DB Backup File
set nocount on
go
declare @backup_path nvarchar(500)
select @backup_path =
-- Path to Backup file
'\SERVERNAMESHARE_NAMEMY_DB_BACKUP_FILENAME.BAK'
create table #header (
BackupNamenvarchar(128)null,
BackupDescriptionnvarchar(128)null,
BackupTypeintnot null,
ExpirationDatedatetimenull,
Compressedintnot null,
Positionintnot null,
DeviceTypeintnot null,
UserNamenvarchar(128)not null,
ServerNamenvarchar(128)not null,
DatabaseNamenvarchar(128)not null,
DatabaseVersionintnot null,
DatabaseCreationDatedatetimenot null,
BackupSizedecimal(28,0)not null,
FirstLsndecimal(28,0)not null,
LastLsndecimal(28,0)not null,
CheckpointLsndecimal(28,0)not null,
DatabaseBackupLsndecimal(28,0)not null,
BackupStartDatedatetimenot null,
BackupFinishDatedatetimenot null,
SortOrderintnot null,
CodePageintnot null,
UnicodeLocaleIdintnot null,
UnicodeComparisonStyleintnot null,
CompatibilityLevelintnot null,
SoftwareVendorIdintnull,
SoftwareVersionMajorintnull,
SoftwareVersionMinorintnull,
SoftwareVersionBuildintnull,
MachineNamenvarchar(128)not null,
Flagsintnull,
BindingIDuniqueidentifier null,
RecoveryForkIDuniqueidentifier null,
Collationnvarchar(128)null,
Seqintnot null
identity(1,1),
)
create table #filelist (
LogicalNamenvarchar(128)not null,
PhysicalNamenvarchar(128)not null,
Typenvarchar(10)not null,
FileGroupNamenvarchar(128)null,
Sizedecimal(28,0)not null,
MaxSizedecimal(28,0)not null,
Seqintnot null
identity(1,1),
)
insert into #header
exec ('restore HeaderOnly from disk = '''+@backup_path+''' ')
insert into #filelist
exec ('restore FilelistOnly from disk = '''+@backup_path+'''')
declare @tab varchar(1), @cr varchar(2)
select @tab = char(9), @cr = char(13)+Char(10)
select
[--Restore--]=
case
when a.Seq = 1
then
@cr+
@cr+'restore database '+c.DatabaseName+
@cr+'from disk ='+@cr+@tab+''''+
@backup_path+''''+@cr+'with'+@cr
else ''
end+
@tab+'move '''+a.LogicalName+
'''to '''+a.PhysicalName+''' ,'+
case
when a.Seq = b.Seq
then
@cr+@tab+'replace, stats = 5 , recovery'
else ''
end
from
#filelist a
cross join
( select Seq = max(b1.Seq) from #filelist b1 ) b
cross join
( select DatabaseName = max(c1.DatabaseName)
from #header c1 ) c
order by
a.Seq
go
drop table #header
drop table #filelist
Results, modify as needed:
--Restore--
--------------------------------------------------------------------
restore database MY_DB
from disk =
'\SERVERNAMESHARE_NAMEMY_DB_BACKUP_FILENAME.BAK'
with
move 'PRIMARY'to 'D:MSSQLDATAMY_DB_PRIMARY.MDF' ,
move 'DATA1'to 'D:MSSQLDATAMY_DB_DATA1.NDF' ,
move 'DATA2'to 'D:MSSQLDATAMY_DB_DATA2.NDF' ,
move 'LOG'to 'D:MSSQLDATAMY_DB_LOG.LDF' ,
replace, stats = 5 , recovery
CODO ERGO SUM
View 4 Replies
View Related
Dec 30, 2007
I am confused regarding why the default behavior of this option is to use file no 1 if the option is not specified? If I take two backups on different days, weeks, months, etc. and write them to the same Backup set, the second and most recent backup by the way gets the higher file number (position) as one would expect. What is incomprehensible to me is why the decision was made to restore the oldest backup from the backup set if you do not specify with file no? Seems like common sense that I would NEVER want to restore the oldest backup by default and would most-likely always want to restore the most recent backup by default!
If anyone has suggestions on how I could suggest that the behavior of this option be changed, I would appreciate it, as this has caused me much pain.
Tim
View 2 Replies
View Related
Jul 19, 2007
We are doing the following steps:-
1. Weekly Full Bckup
2.Daily Differential backup
3.hr Log back up
The following command works fine for all the Backups. it means backup file is fine.
RESTORE FILELISTONLY from DISK = 'D:BackupewDB_ full.BAK'
RESTORE HEADERONLY FROM DISK = 'D:BackupewDB_ ull.BAK'
RESTORE LABELONLY FROM DISK = 'D:BackupewTest_full.BAK'
RESTORE VERIFYONLY FROM DISK = 'D:BackupewTest_full.BAK'
Also The full back up restoration works fine:
RESTORE DATABASE Test3 FROM DISK = 'D:BackupewTest_full.BAK'
WITH MOVE 'Test2_Data' TO 'F:MSSQL2KMSSQLdataTest2Net_Data.MDF',
MOVE 'Test2_Log' TO 'F:MSSQL2KMSSQLdataTest2Net_Log.LDF',
NORECOVERY
GO
/* RESULT :
Processed 1032 pages for database 'Test3', file 'test2_Data' on file 1.
Processed 1 pages for database 'Test3', file 'test2_Log' on file 1.
RESTORE DATABASE successfully processed 1033 pages in 1.907 seconds (4.433 MB/sec).
*/
But While restoring the Differential file it throws error:
RESTORE DATABASE Test3 from DISK = 'D:Backupew est2_Diff1.bak'
WITH NORECOVERY
GO
Msg 3136, Level 16, State 0, Line 1
Cannot apply the backup on device 'D:Backupew est2_Diff1.bak' to database 'Test3'.
Msg 3013, Level 16, State 1, Line 1
RESTORE DATABASE is terminating abnormally.
I checked the SQL Server Log no error msg corresponding Differential backup restore.
I don't know how to proceed further.Can any one guide me how to over come this..
Thanks !
View 2 Replies
View Related
Aug 12, 2006
Hi everybody,
On executing the RESTORE command of SQL Server to restore from a backup of 78.3 MB, the "Server Application Unavailable" error message comes up.The error message in the Application log is as follows:aspnet_wp.exe (PID: 2184) was recycled because memory consumption exceeded the 152 MB (60 percent of available RAM).
However using Query Analyser of SQL Server I am able to restore the database.
What is the solution to this problem?
View 2 Replies
View Related
Jun 15, 2004
I can run this example from SQL Book Online from sql query analyzer. I can build the TestDB database.
BACKUP DATABASE Northwind
TO DISK = 'c:Northwind.bak'
RESTORE FILELISTONLY
FROM DISK = 'c:Northwind.bak'
RESTORE DATABASE TestDB
FROM DISK = 'c:Northwind.bak'
WITH MOVE 'Northwind' TO 'c: est estdb.mdf',
MOVE 'Northwind_log' TO 'c: est estdb.ldf'
GO
But... When I build stored procedure and call it through VB6. I've got the gray database symbol along with message TestDB (Loading/Suspecting)
Why I cannot run these commands through VB6
View 1 Replies
View Related
Jan 25, 2006
I am trying to create sql code that restores a backup of a master database to a new database on the same server. It “seems” to run correctly as no errors are produced. However, the most recent updates to the master database are not present in the new databases. All databases are using the Full recovery model. What is really strange is that if I do (what I think is) the same function in Enterprise Administrator, the restore works fine! For both methods I used the same backup file!
Any and all help is sincerely appreciated.
The master databases from which the backups are made start with “MODTRNMaster”
The databases which are created from the restores start with “M1_” and “M2_”. (We call them training room databases.)
My script for backing up the master databases:
-- Backup the master training database
backup database MODTRNMaster
to disk = 'f:kupMODTRNMaster.bak'
backup database MODTRNMaster_IMG
to disk = 'f:kupMODTRNMaster_IMG.bak'
backup database MODTRNMaster_MNC
to disk = 'f:kupMODTRNMaster_MNC.bak'
backup database MODTRNMaster_VM
to disk = 'f:kupMODTRNMaster_VM.bak'
go
This is the restore script for restoring the first training room databases. I’m hoping that there is just something simple that I’m overlooking in these restore statements! J
-- Restore the backup of the master training database into the
-- training room #1 database.
use master
go
drop database M1_MSLH
go
restore database M1_MSLH
from disk = 'f:kupMODTRNMaster.bak'
with move 'DEV5_Data' to 'f:mssqldataM1_MLSH.mdf',
move 'MM' to 'f:mssqldataM1_MLSH_1.mdf',
move 'AMB' to 'f:mssqldataM1_MLSH_2.mdf',
move 'DM' to 'f:mssqldataM1_MLSH_3.mdf',
move 'IMM' to 'f:mssqldataM1_MLSH_4.mdf',
move 'ED' to 'f:mssqldataM1_MLSH_5.mdf',
move 'DEV5_Log' to 'f:mssqllogM1_MLSH_log.ldf',
recovery
go
Thanks in advance
:eek:
:eek:
View 5 Replies
View Related
May 28, 2014
I created a dummy database (TomsTest) and then I try to restore my other database "DEV" to it.Normally, you have to use the Move for both the mdf and ldf files to tell it to restore to another database.But the message I am getting is: The file 'D:SQLDataTomsTest.mdf' cannot be overwritten. It is being used by database 'TomsTest'.
USE [master]
RESTORE DATABASE [DEV] FROM DISK = N'D:SQLBackupDEV_backup_2014_05_28.bak' WITH FILE = 1,
MOVE N'Dev' TO N'D:SQLDataTomsTest.mdf',
MOVE N'DEV_log' TO N'D:SQLDataTomsTest_log.ldf', NOUNLOAD, REPLACE, STATS = 5
Of course it is in use, that's always the case. Even if I put it in single use mode, it still doesn't work.I tried it on another machine and had the same problem. Not sure why. If I call it the same name, it works fine but I don't want to overwrite the original database, I just need to get some data from the backup.
View 4 Replies
View Related
May 18, 2007
A full database backup file was created and placed in my C:Program filesMicrosoft SQL ServerMSSQL.1MSSQLBackup folder. In attempting to restore the file using "Restore Database", I get the following error: System.Data.SqlClient.SqlError: Directory lookup for the file "d:Microsoft SQL ServerMSSQLdataworkspace.mdf" failed with the operating system error 3 (The system could not find the file path specified.).
Any help is appreciated.
View 6 Replies
View Related
Jun 4, 2008
Not sure this is the correct forum, but I'll give it a go. I am in the process of deploying a series of databases from a development environment to a production environment. I've done some searching around best practices, but haven't found anything specifically calls out what is best. I am looking to find out the best approach for moving the code/tables/views/SP's, well everything from my dev environment to the production environment. Due to the complexity and large number of objects to be created, would a backup/restore to the production server be more prudent than creating a batch file type thing that creates all the objects through a series of scripts?
View 3 Replies
View Related
Sep 22, 2015
What is the recommended size and file growth for a database and log file? We will be storing approx 10000 records a day.Currently we have the following:
CREATE DATABASE Dummy
ONÂ
PRIMARY
( NAME = Dummy_data,
  FILENAME = 'D:....DATADummy.mdf',
  SIZE = 250MB,
  FILEGROWTH = 25MB )
LOG ON
( NAME = Dummy_log,
  FILENAME = 'D:....DATADummy_log.ldf',
  SIZE = 50MB,
  FILEGROWTH = 5MB ) ;
GO
View 3 Replies
View Related
Jun 23, 2015
We are told that we cannot get remote access on our DB servers , can access them only via SQL management studio. But we are the one's who will be restoring all our DB's from current setup to new servers.
My Question:
1. Can we restore the DB's directly via SQL Management studio(from other server where management studio is installed) without logging into the DB server.
2. How do we set the mdf/ldf file paths, assuming we have elevated access on the DB. Is this possible?.
Any other blockers we can face?
View 1 Replies
View Related
Aug 18, 2014
Executed as user: S233683-AD01S233683NJ3SQL05. ...at file already exists.' [SQLSTATE 42000] (Error 22048) Â ERROR -- Could not backup database: master - BACKUP DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 50000) Â xp_create_subdir() returned error 183, 'Cannot create a file when that file already exists.'
View 2 Replies
View Related
Oct 22, 2015
Is it possible to backup/restore sql server databases in a logical way like oracle(exp/imp, expdp,impdp, can export/import tables/users etc)?my case, I have a database which has many data files, in different file groups, I would like to put them together into one file and don't want to shred the database.
View 6 Replies
View Related
Jul 1, 2015
I have a database size of 9.8TB and I backup it to 30 backup devices. Each one has 110GB after backup compression.I tried to restore these files to standby server via 100MbE network but it always failed. My colleague told me this never happen before and I said yes because I have done this before a lot of times when backup devices are significantly smaller.He said the only way is to copy backup files locally and restore locally. But I am trying another method, I create more: 64(maximum) backup devices and try to restore via network again.SQL server version is Microsoft SQL Server 2012 (SP1)
- 11.0.3401.0 (X64)  Jan 9 2014 13:22:15  Copyright (c) Microsoft CorporationÂ
Enterprise Edition: Core-based Licensing (64-bit) on Windows NT 6.1 <X64> (Build 7601:
Service Pack 1) .
---Â error message ---
5 percent processed.
10 percent processed.
15 percent processed.
[code]....
RESTORE DATABASE is terminating abnormally.
View 11 Replies
View Related
Feb 11, 2008
Hi Dear,
May Any one guide me?
I have a backup file of database which is in SQL Server 2000. it has no Extension.I want to restore this backupfile or this database in my SQL Server 2005.
I have tried to Attach Database or attach this backup file in Sql Server2005 but it also fails .
First I have created New database name as is on the backupfile and then I have also tried to rename this file with .bak extension and then try to restore again it fails.
Plese Guide me urgently........
:eek: :eek: :eek: :eek: :eek:
View 9 Replies
View Related
Dec 15, 2005
hi
i try to restore a bak file from another sql2005 server to my sql2005 server, but it show the error message as below :
TITLE: Microsoft SQL Server Management Studio Express
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.Express.ConnectionInfo)
------------------------------
ADDITIONAL INFORMATION:
Cannot open backup device 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBackupackup.bak'. Operating system error 5(error not found).
RESTORE HEADERONLY is terminating abnormally. (Microsoft SQL Server, Error: 3201)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=3201&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
pls some one can help me ???
thanks
chaus
View 62 Replies
View Related
Aug 24, 2006
Hello,
How do I restore a sql database that is on a clustered server from a sql database backup file that is on a non_clustered server?
Thanks,
Serey
View 3 Replies
View Related
