I have TWO named SQL Server instances (on the same machine) and I need to know the port of each of them, how can I do that? Is it write to check the following:
Which one to take: "TCP Dynamic Ports" or "TCP Port"? and what is the difference between them anyways?Â
Can the two instances (or more)Â on the same machine use the same port?!
Basically the question is, which number should I pick?
View 4 Replies View RelatedI have a new named instance (SQL Server 2005 x64 SP2 (Build 3159) Developer edition) setup with dynamic port selection. A default instance was also running on the server prior to the named instance setup.
SQL Server Browser service is running. Remote connections are configured on the named instance. But still remote clients can only connect when the port number is specified after the instance name (servernameinstancename,9999). Without the port number, "error 26 - Error locating Server/instance specified" is thrown.
Doesn't the SQL Server Browser service eliminate the need for clients to specify the port number? What am I missing?
Thanks.
Thanks for Microsoft's Windows XP Service Pack 2 and Windows Server 2003 that make the security much stronger. However, besides the invisible benefit so far, I have become the victim of this security policy.
I have several named instances of SQL 7/2000 installed in my machine. They are not visible out of the Microsoft new fire wall. I need to access the instances from outside the fire wall, but I don't know which port I should open for the instances.
From SQL online, the default instance of SQL server is connected through TCP/IP by default port 1433. I could successful open that port and made the default instance visible to outside. However, the port 1433 doesn't work for the named instances. SQL online said, the port for named instance is dynamically (by default) chosen the first time the instance is started. So, actually, I have no way to know the port.
Is there anyway that I can check the database or somewhere to get the port that is used by the named instance?
Thanks for any input and recommendation.
I have opened up a port on a remote SQL instance and can see that the port is LISTENING when using the PortQry tool. I have also set the TCP port in the TCP/IP properties in the IPAll section for that instance, yet I am unable to connect and get an error of
Connection Timeout Expired. The timeout period elapsed while attempting to consume the pre-login handshake acknowledgement. This could be because the pre-login handshake failed or the server was unable to respond back in time. The duration spent while attempting to connect to this server was - [Pre-Login] initialization=1; handshake=14998; (.Net SqlClient Data Provider)
I have done this on other instances, although they were default instances, and it has always worked fine.
I changed the Port of my named instance to use static port but still error log is giving two values ,why??
spid15sServer is listening on [ 'any' <ipv6> 50152].
spid15sServer is listening on [ 'any' <ipv4> 50152].
ServerServer is listening on [ ::1 <ipv6> 57518].
ServerServer is listening on [ 127.0.0.1 <ipv4> 57518].
connecting to a SQL Server Instance. I have a SQL server DB on a server having an Instance not running on the default port. Let's say ServerAInstanceA has the services exposed on Port 12345. When I'm trying to connect to ServerAInstanceA without specifying the port number, while I can connect from one client machine (ClientA), I am unable to connect from a different client machine (ClientB).On a side note, when I provide the port number, I can connect both from clients A and B. My question is, when I do not provide the port number, why is one client machine able to connect while the other isn't?
View 4 Replies View RelatedWe have 3x instances of SQL Server 2012 installed on a single remote server - there's the default MSSQLSERVER instance, then INSTANCE01 and INSTANCE02. I can remotely connect to the default MSSQLSERVER instance through SSMS, but I cannot connect to either of the additional named instances (INSTANCE01 or INSTANCE02).Â
For example, if I try to connect to "sql.domain.com", I can successfully access the default instance on the remote server. If I try to connect to "sql.domain.comINSTANCE01", I get an error stating
"A network-related or instance-specific error occurred while establishing a connection to SQL Server".
However - if I try to connect to "sql.domain.comINSTANCE01, 49301" (where 49301 is the TCP Port for the TCP/IP Protocol for this SQL Server instance), I am able to successfully connect.
This leads me to think that there's a communication issue with the SQL Server Browser service running on the remote SQL Server and my workstation.Â
The following items have been verified:
SQL Server Browser is running on the remote SQL ServerWindows Firewall has been disabled on the SQL ServerTCP Ports 1433, 1434, 1954, and 49301 have been opened up on the remote destination's firewallUDP Port 1434 has been opened up on the remote destination's firewall.
I'm trying to configure a named instances of SQL Server 2012 SP2 to have specific IP addresses and listen to that IP on port 1433. Alongside this, I have the default instance running on a different IP and listening to that on port 1433.I've managed to get them configured so that they are reachable using the IP, and looking at the log for each they are listening correctly on that IP on port 1433; in addition, the default instance connects fine using the SERVERNAME.However, when I try and connect to the named instance using the SERVERNAME/INSTANCENAME syntax, I receive the following:-
"Cannot connect to SERVERINSTANCE.
Instance failure. (System.Data)"
Configuration for the TCP/IP protocol for that instance is as follows:-
Protocol Tab
Enabled= Yes
Keep Alive = 30000
Listen All = No
IP addresses Tab
IP1
Active = Yes
Enabled = Yes
IP Address = 10.1.1.1
TCP Dynamic Ports = 0
TCP Port = 1433
[code]...
The SQL Browser service is running and prior to switching off Listen To All, I could connect to the instance remotely using the instance name.
I have a named sql instance on SQL 2012. The issue is that the clients is having problem connecting to it when the firewall is on, this is not consistent. The connection is fine when I disabled the firewall. When I turned the Windows firewall back on, it will work for awhile and it fails. I checked the SQL configuration manager and saw that a dynamic port is assigned to the named instance. I did put that in the firewall rule and unblock it. I also put TCP 1433 and 1434 as well as the browser service port, TCPUDP 2382 and it still didn't work.What is the best way to determine what port does the named instance are listening?
View 11 Replies View Relatedwhy we will go to install named instance as we having default instance already installed. Is there any advantage of named instance.
View 6 Replies View RelatedI've two instances(Default, Named[dynamicsFINANCE]) running on SQL server 2014. However, when I try to connect to named instance say (dynamics FINANCE) using SQL authentication from local SSMS, I get below error message.A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)I assigned a static port number to the named instance [dynamicsFINANCE]Â 1450. I also setup the firewall rule to allow access to Port 1450.
View 4 Replies View RelatedI have access to the default instance of a SQL Server ..... I have access to the QA only .. by reading the registry through the QA I get to knw that there are additional 4 more instances on the Server ..... is is possible to get the port on which they are listening using the QA ....
I knw that we can go to the servers network utility & see it there in the TCP /IP ... but i dont have access to that , neither do i have access to the error logs that tell me , on which port is SQL Server listening to
Can someone help
The box I am trying to connect to is running two instances of SQL Server.
There is a SQL Server 2005 instance which is the default. There is a SQL Server 2000 instance which is named 'SQLSERVER'.
I can connect to the SQL Server 2000 instance no problem:<add key="ConnectionString" value="server=MYPCSQLSERVER;database=mydatabase;user id=****;password=****" />
However, I am having trouble connecting to the Default SQL Server 2005 instance. I have tried:
<add key="ConnectionString" value="server=MYPC;database=mydatabase;user id=****;password=****" />
but it doesn't work. I have tried explicitly setting SQL Server 2005 to use port 1434 (as SQL Server 2000 is running on port 1433), and then used:
<add key="ConnectionString" value="server=MYPC,1434;database=mydatabase;user id=****;password=****" />
but this doesn't work either.
Am I mssing something here? Any help much appreciated
Thanks...
I've two instances(Default, Named[dynamicsFINANCE]) running on SQL server 2014. However, when I try to connect to named instance say (dynamicsFINANCE) using SQL authentication from local SSMS, I get below error message:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
I assigned a static port number to the named instance [dynamicsFINANCE] 1450. I also setup the firewall rule to allow access to Port 1450.
I have a 3 node cluster on which I have installed SSAS as it's own insntance. I have created this as a named instance and can connect to it by serverinstance if I'm on the server itself. However from my desktop I get the error saying instance was not found on server name.
I have defined an alternate port and setup firewall rules and can connect via server:port but not serverinstance. Prior to making this change SSAS was running on default port of 2383 and I could connect just by servername.
I have read many articles for previous versions saying that clustered SSAS will always use 2383 and that you must connect just using servername. However and this is were it gets strange. I have a 2 node UAT cluster with SSAS setup exactly the same way I've described above and I can connect from my desktop as serverinstance.
Should I be able to connect as serverinstances for a named clustered instance in 2012 ?
Hi there,
I want to change the default sql-server port number 1433 to a new one. Can i do that? If yes, how?
Also, i have noticed that there is no port number option in the sql server 2005 management studio login window. So, what if the server has changed its port number?
Any suggestions would be appreciated. thanks
Hi,
Are there any one who give a example of SMO or WMI to set SQL Server port number?
How can I configure dbdesigner to connect to a sql server that is listening on a different port number ? For those of you not familiar with debdesigner:
http://fabforce.net/dbdesigner4/index.php
I can connect to a local instance just fine but not to a sql server that is listening on a specific port (named instance)
[edited to add]
it works ! I just had to use the name instance notation
server instance_name
It wouldnt connect with iport_number syntax
hooray !
I know the ..Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGErrorLog on the server contains the information. But that needs I to RDP to the server or open the file remotely. Is there any other way to find out the port from my SSMS connection?
I remember in SQL Server 2000 you could find the information by choosing Properties of a connection in EM and click on the Network Configuration button. (I know it works when you are ON THE SERVER! But when I tried from my desktop, pressing the button didn't do anything)
Canada DBA
How to connect to the named instance of SQL Server using Java?
I had the following code working fine(but with the default instance only)
SET JAVA_HOME=D:Program FilesJavaSoftJRE1.3.1_03
"D:Program FilesJavaSoftJRE1.3.1_03injava" -classpath Launcher.jar;Sprinta2000.jar;log4j.jar;activation. jar;mail.jar Launcher -Ddatabase -Uuser -Ppassword -Sserver:1433 -hlocalhost -p9900 -TTrue -VFalse -QK -QS
But the same code is failing with the named instance:
SET JAVA_HOME=D:Program FilesJavaSoftJRE1.3.1_03
"D:Program FilesJavaSoftJRE1.3.1_03injava" -classpath Launcher.jar;Sprinta2000.jar;log4j.jar;activation. jar;mail.jar Launcher -Ddatabase -Uuser -Ppassword -Sserverinstance:1434 -hlocalhost -p9900 -TTrue -VFalse -QK -QS
I have a java compiled jar file, which accept the connection string as follows: -Uusername -Ppassword -Sservername:port
This string works fine with the default instance of SQL Server, I mean as long as you supply the name of the SQL Server as 'SQLServer', but if I want to run it against the named instance of SQL Server like 'SQLSERVERNamedInstance' then the connection is failing, giving me the unknown host error. Any idea why?
We have installed SQL 2000 SP4 on Windows 2000 Server. We created named instances on the SQL server.
When trying to connect to named instances from a remote sql client which is on windows 2000 and windows 2003, its throwing an error message saying that remote connections are disabled.
But, remote connections are enabled on the SQL server.
After changing the component services settings on windows 2003 where sql client is installed, we are able to connect to named instances.
But, after applying the same settings on another windows 2003 machine, we are unable to connect to the same instances.
We have another machine where we installed SQL 2005 on windows 2003 SP1. When trying to connect to named instances from any remote client, its throwing an error message saying that remote connections are disabled. But, remote connections are enabled in SQL server settings. We tried connecting to the instances by changing the component services settings but still we are facing the same issues.
Can you please help me on above issues?
Hi, I have a task in hand to migrate (upgrade) from SQL2K named instance to SQL2K5 default instance. There are many intranet applications touching current SQL2K. I would like to perform this upgrade such that I don't have to touch any application code - meaning I don't have to change the connectionstring to point to new Default instance. How can I achieve this?
So, in otherwords, here is what I want to achieve:
Current Server: SQL2K: SERVER_AINSTANCE_A (named instance)
Upgraded Server: SQL2K5: SERVERB (default instance)
If I have both default, I could achive this by setting up DNS alias after migration done so that any call for SERVER_A would point to SERVER_B. But in my case, I don't have SERVER_A, I have named instance. Is there any solution?
Regards,
Vipul
Hi all,
I have to create a DSN for SQL-Server. Therefor I use the function "SQLConfigDataSource" from "ODBCCP32.DLL". But the problem is that the SQL-Server does not use the Standard-Portnumber 1433. I've tried to make the DSN with "SERVERNAME xxxx" where xxxx is the Portnumber, sometimes it works, but often it does not. When it does not work, then the Checkbox in the ODBC-Configuration-Tool is checked, so the connection is searching for the standard-port. How can I tell the system that it shall NOT use dynamic configuration?
Thanks for help,
Franz
I am trying to perform a distributed query however have a situation I haven't dealt with before the linked server I add to do the query is a named instance (DVD_NASDOMINO). How would I specify this in a query as in the FROM part in a sql statement. I tried the obvious DVD_NASDOMINO.qlsdat.dbo.stmenqry and DVD_NAS.DOMINO.qlsdat.dbo.stmenqry.
Both returned errors in the query.
Thanks for the help.
I am trying to set up a Named Instance of SQL 2000 on the same machine that has a default instance of SQL 7.0. The setup always completes and I am able to register the Named Instance of the SQL Server with which it was installed on. However, when I try to connect the users to the database, with both windows and SQL authentication, I receive a SQL server not found error. I have tried an alias setup as well as physically specifying the port number in settup up an ODBC connection.
Has anyone ran into similar problems?
Also, has anyone been able to successfully complete the process as mentioned above?
I have a server with sql server 2005 installed as the default instance -- I have a piece of software that needs SQL2000 to be the default instance. Is there a way other than install new sql2005 named instance and move databases to rename my SQL2005 instance from <machinename> to <machinename>sql05 for example?
Bryan
How do I populate a SQL Server express 2014 table from an impinj speedway reader via http address and port number...
View 6 Replies View RelatedHi Folks,
Is it better to install SQL Server Express Default or install as Named Instance?
What are the pros and conns?
Thanks
If i initially installed SQL Server 2005 Developer Edition using the "default instance", how do i create an additional (new) SQL Server 2005 (90) "named instance" without reinstalling SQL Server 2005?
Several applications in out environment use Microsoft access to access the SQL server databases. Our new SQL Server 2005 instance is a named instance. We would like to create a .reg file to update the individual workstations as part of the migration. For some reason the .reg file with a named instance does not work. If the entry is created through the GUI it works. The server drop down does not show the named instance, only the server name but if you type the servernameamed_instance it finds it ok. Here is an example of what works and what does not. Any ideas on what the problem might be?
Windows Registry Editor Version 5.00 - Does NOT work
[HKEY_LOCAL_MACHINESOFTWAREODBCODBC.INIADOITTars]
"Driver"="C:\WINDOWS\System32\SQLSRV32.dll"
"Description"="ADOITTars"
"Server"="NRSQL3NRSQL3"
"Database"="ADOITTars"
"LastUser"=""
"Trusted_Connection"="Yes"
[HKEY_LOCAL_MACHINESOFTWAREODBCODBC.INIODBC Data Sources]
"ADOITTars"="SQL Server"
Windows Registry Editor Version 5.00 - works
[HKEY_LOCAL_MACHINESOFTWAREODBCODBC.INIADOITTars]
"Driver"="C:\WINDOWS\System32\SQLSRV32.dll"
"Description"="ADOITTars"
"Server"="NRSQL2"
"Database"="ADOITTars"
"LastUser"=""
"Trusted_Connection"="Yes"
[HKEY_LOCAL_MACHINESOFTWAREODBCODBC.INIODBC Data Sources]
"ADOITTars"="SQL Server"
I have two instances of SQL Server on the same PC:
Default instance: SQL Server 2000
Named instance with name €œMS2005€?: SQL Server 2005.
Also I have another SQL Server 2005 on another PC.
I created a .NET 2.0 Compact Framework application that connects to the database and executes simple query. This application can connect to any instance of the SQL Server when it is executed on the PC (not on the server). But the problem is that when I try to execute the application from the windows CE 5.0 device, the application can only connect to the default instance (SQL 2000 and 2005) and can not connect to the named instance (Name: MS2005).
Is it some kind of limitation of the SqlClient library for the compact framework?
Below are the code and connection strings:
string connectionString = €œServer=1.1.1.1;Database=DB1;Uid=sa;Pwd=€?
string connectionString = €œServer=1.1.1.1\MS2005;Database=DB1;Uid=sa;Pwd=€?
using (SqlConnection connection = new SqlConnection(connectionString))
{
connection.Open(); //This is the point where exception is generated
using (SqlCommand command = connection.CreateCommand())
{
command.CommandText = "select count(*) from users";
object result = command.ExecuteScalar();
Console.WriteLine("Result: [{0}]", result);
}
connection.Close();
}
Thank you for your time and advice.