DB Engine :: Migrating Clustered Server From One Location To Another
Oct 16, 2015
We currently have two virtual machines running on Windows Server 2003 together with SQL 2005. These servers are in a cluster and are using multiple physcial RAW disk mappings from shared storage (SAN) for their shared disks within a VMware ESXi 5.1 cluster.I need migrate these SQL servers over to new infrastructure, in a new physical location. I tried using VMware converter to import the active member server in the SQL cluster, but I am receiving VSS errors when running the conversion. I can see that shadow copy is disabled on all the disks on the server.
View 3 Replies
ADVERTISEMENT
Sep 4, 2015
We are going to use SQL Sever change tracking. The problem is that some of our tables, which are to be tracked, have no primary keys. There are only unique clustered indexes. The question is what is the best way to turn on change tracking for these tables in our circumstances.
View 4 Replies
View Related
Aug 25, 2015
<g class="gr_ gr_78 gr-alert gr_gramm Punctuation replaceWithoutSep" data-gr-id="78" id="78">Friends,</g>
<g class="gr_ gr_78 gr-alert gr_gramm Punctuation replaceWithoutSep" data-gr-id="78" id="78">I</g>
i am migrating one database from SQL Server 2008 where I have around 20 databases to SQLServer 2012. To migrate the login I was thinking about to use SP_Help <g class="gr_ gr_114 gr-alert gr_spell ContextualSpelling ins-del multiReplace" data-gr-id="114" id="114">revlogin</g> store procedure but now what I believe is this SP scripts out whole server level login and I don't need all the logins in the server except related to the database that I am migrating to.
<g class="gr_ gr_418 gr-alert gr_gramm Grammar multiReplace" data-gr-id="418" id="418">please</g>
best way to migrate logins only related to the specific database to the new server.
View 4 Replies
View Related
Nov 30, 2006
I have been trying to change the location of the SQL 2005 error log. It's logging to the default location at
C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOG
I want to move the log location to the E drive because it can get quite large. I already changed the setting in the SQL Server Error and Usage config tool, but this did not seem to make a difference.
View 5 Replies
View Related
May 16, 2015
I have C,D,E drives on server. Data files will be on D and Log on E. My question is what is best practice for data and log files for system databases during sql server installation selection? Should they be on C drive along with SQL Server installation or D & E? If they should not be on C then what is the reason and what is benefit to move them on other drives.
View 9 Replies
View Related
Jan 9, 2008
Hi,
We've had this issue for awhile, but I have not been able to find a resolution for this. We have 2 identical servers (hardware & software) set-up: IBM x3850-(88633RU) running Windows Server 2003 Enterprise x64 (5.2.3790 SP1 Build 3790 R2). Server A was running SP1 (Build 9.0.2047) on a 3-node active-passive-passive failover cluster. Server B was running SP2 + Hotfix KB933097 (Build 9.0.3152) on a 2-node active-passive failover cluster. Both these servers are heavily utilized, and when originally installed with these versions of SQL Server Enterprise 2005 experienced no issues during or post-install. The original install of SQL 2005 Enterprise on both these servers had the Cluster Group Selection "Data files" setting changed to "M:MICROSOFT SQL SERVER" so that all system dbs and binaries would be installed to that location. On Server B where SP2 had already been applied, the update was downloaded on May 1, 2007, well after the GDR issues which had been plaguing SP2 releases was supposed to have been resolved.
Our problems began the night when we tried to apply hotfix KB933097 on Server A, and cumulative update packages 1,2,3 on Servers A & B, as well as catch-up the same SP2 and hotfix packages on other non-clustered servers where default system db locations remained the same. On all servers other than Servers A and B, the installs proceeded smoothly and without issue.
On Server B, which was already running SP2 + Hotfix KB933097, we tried installing Cumulative Update Package 1 (Build 9.0.3161) on the primary node. The install proceeded until the following errors were encountered:
"[Microsoft][SQL Native Client][SQL Server]Cannot find the object 'dm_exec_query_resource_semaphores', because it does not exist or you do not have permission."
"[Microsoft][SQL Native Client][SQL Server]Cannot find the object 'dm_exec_query_memory_grants', because it does not exist or you do not have permission."
After this, the setup finished with the message "Product: Microsoft SQL Server 2005 (64-bit) - Update 'Hotfix 3161 for SQL Server Database Services 2005 (64-bit) ENU (KB935356)' could not be installed. Error code 1603. Additional information is available in the log file C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB935356_sqlrun_sql.msp.log."
We rebooted the server and tried several times to reinstall the hotfix as sa and as the database service account with full windows and sa credentials, each time with no success, and rebooting between retries. All other components were installed successfully. We were hesitant to try uninstalling the hotfix, since it was unable to be removed successfully in previous attempts. However, when I connected to Database Engine using Management Studio, I found that the version of SQL being reported was in fact Build 9.0.3161! Everything also appeared to be running properly.
I tried to to Google the answer, but could only find information as applied to SP1 when system dbs master and mssqlsystemresource were located on different locations (http://support.microsoft.com/default.aspx?scid=kb;EN-US;918695 ). I had already verified that all system dbs, including the ones mentioned, were originally and currently located together on M:Microsoft SQL ServerMSSQL.1MSSQLData.
Finally I contacted a fellow DBA who advised me to continue installing all the other hotfixes, and then compare all SQL files against other servers where the install succeeded to ensure all system files were updated correctly (matching file sizes and datetime stamps). Since we were depending on a fix in Cumulative Update Package 3 to fix a critical log-shipping security issue, I went ahead with the rest of the installs, getting the same error with each package, rebooting between each install.
We found after the final install that the mssqlsystemresource files in the M:Microsoft SQL ServerMSSQL.1MSSQLData
directory were in fact updated after each install with a new timestamp, and that all files in C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinn matched on both file size and timestamp. The log-shipping security issue we were looking to fix also appeared to be resolved by the last update.
On Server A, which was running SP1 (Build 9.0.2047), we installed the same SP2 package as we had on Server B with no issue. We rebooted and then tried to apply the same Hotfix KB933097 (Build 9.0.3152) that had been applied successfully on Server B and found to our surprise that the same errors were being generated here as well. We continued to apply the rest of the hotfixes so that both servers matched software updates. Comparing the above directories showed that files seemed to have been updated, even though database services appeared to be not installed.
It looks like we now need Cumulative Update 5 hotfix package in order to deal with WMI alerting issues, but I'm afraid to apply it until we have a known resolution for the past errors.
Since this issue was supposed to be resolved by SP2, I'm not sure why these post-SP2 hotfixes should fail. It seems to me to be an issue of the directory location of the system files which is in question.
I can post the hotfix log files as well, if anyone is interested in seeing them.
Any help would be greatly appreciated. As well, does anyone have any idea when SP3 is scheduled to come out? I really don't like applying hotfixes which are usually untested for general purposes, and it seems Microsoft is delaying this in favour of releasing SQL 2008.
View 6 Replies
View Related
Nov 9, 2015
I added a secondary data file to TEMPdb yesterday and gave it a wrong location by mistake. If I try to change the location, then I am getting an error now. I think that is because TEMPdb is in use and that is why I cant change it's secondary file's location. Do I need to take TempDB offline and then change the secondary file's location??
View 3 Replies
View Related
Jun 23, 2015
I have a source sql 2005 with the database collation SQL_Latin1_General_CP1_CI_AS and destination with sql 2012 with the same collation.
But the SQL server llvel collation is different, sql 2005 uses Latin1_General_CI_AI and sql 2012 uses "SQL_Latin1_General_CP1_CI_AS"
Now when i load the data from 2005 for one table to sql 2012 i could see special characters in one column. And i dont see that in the source database. Is there a way to avoid that or is it something we need to manually fix.
View 7 Replies
View Related
Oct 30, 2015
In SQL Server 2012 Instance properties ,database default location is not showing system drive E: which was my backup drive. How can I add it again?
View 8 Replies
View Related
Oct 31, 2015
Give a user table ‘MyTable’. How to know whether the table contains a non-unique clustered index by using SQL query?
View 6 Replies
View Related
Sep 3, 2015
I get "there was an unknown error applying the filestream settings("0x800710dc ") configuring my sql clustered instance with configuration manager. Not clear for me what I have to set for "Windows shared name".. Is it just an aliases or do I have to give the name of a shared disk ??
Get the same issue with SQL2012 and SQL2014..
View 4 Replies
View Related
Nov 4, 2015
Just wonder if system base tables always use clustered index? I am using SQL Server 2005 and find sys.sysidxstats base table is using heap, not clustered index. Why?
View 2 Replies
View Related
Jul 2, 2015
I have 4 servers, 2 each for application (Dev & Prod)
DEV 1 & DEV 2 are standalone servers
Prod 1 & Prod 2 are Windows Clustered Servers.
From one application to other we do Distributed transactions. Dev 1 - Dev 2 or Dev 2 - Dev 1 can start DTC and working fine,but issue comes when Prod 1 - Prod 2 or Prod 2 - Prod 1. I get error message OLE DB provider "SQLNCLI" for linked server "xyz" returned message "No transaction is active.".
Msg 7391, Level 16, State 2, Line 3
The operation could not be performed because OLE DB provider "SQLNCLI" for linked server "xyz" was unable to begin a distributed transaction.
I have tested Dev 1 - Prod 1, Dev 1 - Prod 2, Dev 2 - Prod 1, Dev 2 - Prod 2 everything is working fine only Production servers are causing issue.
I enabled all settings needed for DTC on Cluster MSDTC service but no luck.
View 2 Replies
View Related
May 27, 2014
In SQL Server 2005, the SQL Server full text engine (i.e., Microsoft Full Text Filter Daemon Launcher windows service) was installed as a Generic Service cluster resource in a Windows clustered environment.
However, in SQL Server 2012, the full text engine is not appearing as a "resource" within "Failover Cluster Manager" after installation. Do we need to manually configure the full text engine as a Failover Cluster Manager "resource" for SQL 2012? Or is this not necessary? If it needs to be configured, how do you go about doing it (i.e., what resource dependencies would you setup, etc.)
View 0 Replies
View Related
Oct 25, 2015
I am trying to set up log shipping in a clustered server environment. I am pretty confused about the location of the shared folder to be created to put backup created by log shipping job. Which drive should I use either local or clustered shared drive to store the backups in primary server and to copy the same in secondary Server?
View 2 Replies
View Related
Aug 24, 2006
Hello,
How do I restore a sql database that is on a clustered server from a sql database backup file that is on a non_clustered server?
Thanks,
Serey
View 3 Replies
View Related
Jan 4, 2008
I have large table with 10million records. I would like to create clustered or non-clustered index.
What is the quick way to create? I have tried once and it took more than 10 min.
please help.
View 1 Replies
View Related
Feb 4, 2015
We have a table, which has one clustered index and one non clustered index(primary key). I want to drop the existing clustered index and make the primary key as clustered. Is there any easy way to do that. Will Drop_Existing support on this matter?
View 2 Replies
View Related
Jun 25, 2015
I have a requirement to only rebuild the Clustered Indexes in the table ignoring the non clustered indexes as those are taken care of by the Clustered indexes.
In order to do that, I have taken the records based on the fragmentation %.
But unable to come up with a logic to only consider rebuilding the clustered indexes in the table.
create table #fragmentation
(
FragIndexId BigInt Identity(1,1),
--IDENTITY(int, 1, 1) AS FragIndexId,
DBNAME nvarchar(4000),
TableName nvarchar(4000),
[Code] ....
View 5 Replies
View Related
Aug 28, 2015
I desire to have a clustered index on a column other than the Primary Key. I have a few junction tables that I may want to alter, create table, or ...
I have practiced with an example table that is not really a junction table. It is just a table I decided to use for practice. When I execute the script, it seems to do everything I expect. For instance, there are not any constraints but there are indexes. The PK is the correct column.
CREATE TABLE [dbo].[tblNotificationMgr](
[NotificationMgrKey] [int] IDENTITY(1,1) NOT NULL,
[ContactKey] [int] NOT NULL,
[EventTypeEnum] [tinyint] NOT NULL,
[code]....
View 20 Replies
View Related
Jul 19, 2013
I have created two tables. table one has the following fields,
Id -> unique clustered index.
table two has the following fields,
Tid -> unique clustered index
Id -> foreign key of table one(id).
Now I have created primary key for the table one column 'id'. It's created as "nonclustered, unique, primary key located on PRIMARY". Primary key create clustered index default. since unique clustered index existed in table one, it has created "Nonclustered primary key".
My Question is, What is the difference between "clustered, unique, primary key" and "nonclustered, unique, primary key"? Is there any performance impact between these?
View 5 Replies
View Related
Sep 8, 2006
Hi there, I have a table that has an IDENTITY column and it is the PK of this table. By default SQL Server creates a unique clustered index on the PK, but this isn't what I wanted. I want to make a regular unique index on the column so I can make a clustered index on a different column.
If I try to uncheck the Clustered index option in EM I get a dialog that says "Cannot convert a clustered index to a nonclustered index using the DROP_EXISTING option.". If I simply try to delete the index I get the following "An explicit DROP INDEX is not allowed on index 'index name'. It is being used for PRIMARY KEY constraint enforcement.
So do I have to drop the PK constraint now? How does that affect all the tables that have FK relationships to this table?
Thanks
View 3 Replies
View Related
Nov 24, 2014
What is the easiest way to remember the definitions of clustered and non clustered indexes.
View 9 Replies
View Related
Sep 30, 2015
I have a really super slow stored proc that does something simple. it updates a table if certain values are received.
In looking at this the matching is done on the Primary Key, which is set as a Clustered index, looking further I have another constraint, that sets the same column to a Unique, Non-Clustered.
I am not sure why this was done, but it seems to be counter productive. I have read only references to Which one is better on a primary key, but not can their be both and if it is "Smart".
View 4 Replies
View Related
Feb 26, 2008
Hello,
I've a table with primary key defined as non-clusterd, now without dropping it can I modify the existing index to clustered through tsql as I had to write some migration script and in that script I wanna do this.
Thanks in Advance,
Rohit
View 5 Replies
View Related
Jan 31, 2005
I would like to find information on Clustered and Non-clustered indexes and how B-trees are used. I know a clustered index is placed into a b-tree which makes sense for fast ordered searching. What data structure does a non-clustered index use and how? I tried to find info. on the web but couldn't get much detail...
View 3 Replies
View Related
Nov 1, 2007
I have a table<table1> with 804668 records primary on table1(col1,col2,col3,col4)
Have created non-clustered index on <table1>(col2,col3,col4),to solve a performance issue.(which is a join involving another table with 1.2 million records).Seems to be working great.
I want to know whether this will slow down,insert and update on the <table1>?
View 2 Replies
View Related
Sep 20, 2006
When I try to migrate a database on a SQL Server 2000 server to a SQL Server 2005 server with the Copy Database Wizard of the SQL Server Management Studio, I'm confronted with the following problem;
Performing operation...
- Add log for package (Success)
- Add task for transferring database objects (Success)
- Create package (Success)
- Start SQL Server Agent Job (Success)
- Execute SQL Server Agent Job (Error)
Messages
* The job failed. Check the event log on the destination server for details. (Copy Database Wizard)
When I take a look at 'Event viewer' on the SQL 2005 server, the following error is displayed;
InnerException-->An error has occurred while establishing a connection to the server.
When connecting to SQL Server 2005,
this failure may be caused by the fact
that under the default settings SQL Server does not allow remote connections.
(provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
I already enabled the MSSQLSERVER network configuration protocols (TCP/IP and Named Pipes ).
How do I solve this problem?
View 9 Replies
View Related
Mar 12, 2007
Can SQL Server be installed onto a file server...if so, how?
View 8 Replies
View Related
Sep 21, 2007
Hello,
I'm wondering where exactly is the default location of the rdl file stored on the server?http://<server>/reports/
Thanks,
-Lawrence
View 6 Replies
View Related
Nov 14, 2006
the query:
SELECT a.AssetGuid, a.Name, a.LocationGuid
FROM Asset a WHERE a.AssociationGuid IN (
SELECT ada.DataAssociationGuid FROM AssociationDataAssociation ada
WHERE ada.AssociationGuid = '568B40AD-5133-4237-9F3C-F8EA9D472662')
takes 30-60 seconds to run on my machine, due to a clustered index scan on our an index on asset [about half a million rows]. For this particular association less than 50 rows are returned.
expanding the inner select into a list of guids the query runs instantly:
SELECT a.AssetGuid, a.Name, a.LocationGuid
FROM Asset a WHERE a.AssociationGuid IN (
'0F9C1654-9FAC-45FC-9997-5EBDAD21A4B4',
'52C616C0-C4C5-45F4-B691-7FA83462CA34',
'C95A6669-D6D1-460A-BC2F-C0F6756A234D')
It runs instantly because of doing a clustered index seek [on the same index as the previous query] instead of a scan. The index in question IX_Asset_AssociationGuid is a nonclustered index on Asset.AssociationGuid.
The tables involved:
Asset, represents an asset. Primary key is AssetGuid, there is an index/FK on Asset.AssociationGuid. The asset table has 28 columns or so...
Association, kind of like a place, associations exist in a tree where one association can contain any number of child associations. Each association has a ParentAssociationGuid pointing to its parent. Only leaf associations contain assets.
AssociationDataAssociation, a table consisting of two columns, AssociationGuid, DataAssociationGuid. This is a table used to quickly find leaf associations [DataAssociationGuid] beneath a particular association [AssociationGuid]. In the above case the inner select () returns 3 rows.
I'd include .sqlplan files or screenshots, but I don't see a way to attach them.
I understand I can specify to use the index manually [and this also runs instantly], but for such a simple query it is peculiar it is necesscary. This is the query with the index specified manually:
SELECT a.AssetGuid, a.Name, a.LocationGuid
FROM Asset a WITH (INDEX (IX_Asset_AssociationGuid)) WHERE
a.AssociationGuid IN (
SELECT ada.DataAssociationGuid FROM AssociationDataAssociation ada
WHERE ada.AssociationGuid = '568B40AD-5133-4237-9F3C-F8EA9D472662')
To repeat/clarify my question, why might this not be doing a clustered index seek with the first query?
View 15 Replies
View Related
Aug 3, 2001
Hi,
Is there any way to change the location for the datafile. I need to change the drive from say c to d because it is filling up. Is there anyway to do this or do I have to recreate the database from scracth. I have a whole lot of data in the database already.
Thank you all.
View 1 Replies
View Related
